All Sessions and Papers
Subject to changes. This version is updated according to the last-minute information.
Monday, July 21st |
|
|
21/7/2014
08:30 - 10:30 Opening Ceremony |
OS Room: Auditorium Chair: Eugenio Oñate |
|
The emergence of predictive computational mechanics
|
|
|
10:30 - 11:00 Coffee Break |
|
|
11:00 - 13:00 TECHNICAL SESSIONS |
|
|
21/7/2014
11:00 - 13:00 Meshless and Related Methods, a Minisymposium Dedicated to Celebrate the 80th Birthday of Professor Janusz Orkisz I Minisymposium organized by Sergio Idelsohn, Pierre Villon, G.R. Liu, Paulo M. Pimenta and Suvranu De |
MS114A Room: Mare Nostrum A Chair: Sergio R. Idelsohn CoChair: Pierre Villon |
|
Meshless Finite Difference method - State of the art (Keynote Lecture)
On some aspects of a posteriori error estimation in the multipoint meshless FDM
A face-based smoothed finite element method for hyperelastic models and tissue growth
Meshfree volume-averaged nodal projection methods for incompressible media problems
Meshless method for 3D models with free form surfaces
Mixed meshless local Petrov Galerkin (MLPG) collocation method for modeling of heterogeneous materials
|
|
|
21/7/2014
11:00 - 13:00 HPC-Based CFD Simulations for Industrial Applications I Minisymposium organized by Mariano Vázquez, Makoto Tsubokura , Takayuki Aoki and Mike Nicolai |
MS208A Room: Mare Nostrum B Chair: Takayuki Aoki |
|
Efficient parallel algorithms for embedded fluid structure interaction with unstructured mesh
Parallel Data Transfer Across Sliding Plane for Unsteady Simulations of Multistage Turbomachinery Flows
Preconditioned VMS for compressible flow I: steady problems
Preconditioned VMS for compressible flow II: transient problems
Feel++ : A High Performance Finite Element Embedded Library in C++
|
|
|
21/7/2014
11:00 - 13:00 Innovative Methods for Fluid-Structure Interaction I Minisymposium organized by Harald van Brummelen, Trond Kvamsdal and Roger Ohayon |
MS077A Room: Mare Nostrum C Chair: Trond Kvamsdal CoChair: Harald van Brummelen |
|
An ALE-Eulerian embedded boundary method for tracking boundary layers in turbulent fluid-structure interaction problems (Keynote Lecture)
An immersed boundary method for fluid-rigid body interaction
Conservative coupling method between an inviscid compressible fluid flow and a fracturing structure
Numerical investigation of an airfoil with self-adaptive camber
New theoretical and numerical developments for added-mass effects and flapping dynamics
Unified continuum finite element simulation of turbulent flow fluid-structure interaction
|
|
|
21/7/2014
11:00 - 13:00 Computational Damage and Fracture Mechanics I Minisymposium organized by Michael Brünig and Larissa Driemeier |
MS008A Room: Mare Nostrum D Chair: Michael Brünig |
|
Numerical simulation of damage and failure behavior of biaxially loaded specimen
Robust modelling and simulation of ductile damage
Competition between ASB and void growth assisted shear failure mechanisms: Unified modelling and applications
Capturing polycrystal plasticity and intergranular cracks with a novel DIC method
Elasto-plastic model based on the third invariant of the deviatoric stress tensor: Monotonic and cyclic loading application
Finite Fracture approach for the prediction of damage and failure of laminated composites
|
|
|
21/7/2014
11:00 - 13:00 Applications of Error Estimation and Model Adaptation in Computational Mechanics I Minisymposium organized by Ludovic Chamoin, Pedro Díez, Fredrik Larsson and Kris Van der Zee |
MS010A Room: Mare Nostrum E Chair: Ludovic Chamoin |
|
Recovery-based guaranteed upper error bounds in energy norm of the Finite Element solution for the linear elasticity problem (Keynote Lecture)
New simple, cheap and efficient explicit residual error estimator for adaptive finite element analysis in elasticity and fracture
An error estimator for recovered fields in linear elasticity: towards high performance h-adaptive finite element analysis
Finite element error estimation for boundary value and eigenvalue problems associated with a Schrödinger operator
An updated Lagrangian method with error estimation and adaptive remeshing for very large deformation elasticity problems
R-adaptivity for fluid-structure interaction, deforming domains and internal boundaries
|
|
|
21/7/2014
11:00 - 13:00 Advances in Computational Methods for Inverse Problems I Minisymposium organized by Paul E. Barbone, Dan Givoli and Assad Oberai |
MS075A Room: Mare Nostrum F Chair: Dan Givoli CoChair: Assad Oberai |
|
An inverse source problem for focusing wave energy to subterranean formations (Keynote Lecture)
Reconstruction of elastic moduli from noisy full-field measurements
Advanced computational formulations for boundary-condition free elastic modulus reconstructions from partial interior data
Optimization of torsion transducer sensitivity on layered tissue
Mechanical characterization of abdominal muscle using stereo imaging
Method of data completion for a cauchy problem of elastoplasticity based on minimizing an energy error functional
|
|
|
21/7/2014
11:00 - 13:00 Smart Materials and Structures I Minisymposium organized by Joachim Bluhm, Mieczyslaw Kuczma, Wieslaw Ostachowicz and Surjya Maiti |
MS161A Room: Llevant Chair: Mieczyslaw Kuczma CoChair: Wieslaw Ostachowicz |
|
Modeling of self-healing phenomena in a polymer matrix based on a microcapsule system (Keynote Lecture)
Simulation of mechanical behavior of NiTi shape memory alloys and their applications
Dissipation-based approach and robust integration algorithm for 3D phenomenological SMA constitutive models
Numerical computation of fractional operators for SMA modeling
Modeling of smart concrete beams with shape memory alloy actuators
A coupled problem for porous shape memory alloy fluid-filled beams
|
|
|
21/7/2014
11:00 - 13:00 Advanced Computational Failure Analysis of Fiber Composite Structures I Minisymposium organized by Raimund Rolfes, Eelco Jansen and José Reinoso |
MS043A Room: Mestral Chair: Raimund Rolfes CoChair: Eelco Jansen |
|
A nonlinear domain decomposition method for the simulation of delamination, buckling and contact in laminated composites: Some improvements and examples
Failure mechanics analysis of composite laminate
Multiscale modeling of the compressive behaviour of CFRP structures
Simulation of crack patterns in CMC combining GFEM & Finite Fracture Mechanics
Modal interaction characteristics of an axially loaded composite cylindrical shell using Koiter‘s imperfection sensitivity analysis
Application of a two-way loose coupling procedure to a stiffened composite panel
|
|
|
21/7/2014
11:00 - 13:00 Industrial Applications of Computational Fluid Dynamics and Related Techniques I |
CS658A Room: Ponent 1 Chair: Irene Arias |
|
Evaluation of a passive control strategy for the decrease of acoustic loads behind backward-facing steps
Automated CAE process for thermo-mechanical lifing prediction of a parameterized turbine blade with internal cooling
The generation of higher levels of turbulence in a low-speed cascade wind tunnel by pressurized tubes
Dynamic Stability Analysis of Reentry Capsule with Detached-Eddy Simulation
Solution-adaptive space-time refinement for multispecies aerosol formation
Application of computational fluid mechanics for protection cloth design
|
|
|
21/7/2014
11:00 - 13:00 Advanced Methods in Computational Fluid Dynamics I |
CS655A Room: Ponent 2 Chair: Xesús Nogueira CoChair: José París |
|
A new method for zonal LES – URANS computations with exchange of information between different codes
Development of CFD-DEM model for prediction of pyrolysis and combustion of biomass in a packed bed
Spectrally-consistent regularization of turbulent Rayleigh-Bénard convection
Towards a multi-fidelity approach for CFD simulations of vortex generator arrays
A generalised convergence accelerated pressure-based segregated algorithm
|
|
|
21/7/2014
11:00 - 13:00 Multiscale Methods and Applications in Computational Mechanics I Minisymposium organized by Weiqing Ren and Yang Xiang |
MS116A Room: Terral Chair: Weiqing Ren |
|
A one-domain approach for modeling and simulation of free fluid over a porous medium
A continuum framework for dislocation structure, energy and dynamics of dislocation arrays and low angle grain boundaries
Computing transition rates of rare events in dislocation dynamics
Discrete dislocation dynamics simulation of polycrystalline materials: Grain boundary sliding and grain size effects
Nanomorphology of organic solar cells from multiscale molecular simulations
|
|
|
21/7/2014
11:00 - 13:00 Gas Particles Modeling and Simulation I Minisymposium organized by Jesús M. Blanco, Lakhdar Remaki and Abdelkader Baggag |
MS050A Room: Tramuntana 1 Chair: Jesús María Blanco CoChair: Lakhdar Remaki |
|
Gas-particle model for objects rigid motion in fluids (Keynote Lecture)
Influence of mixing and cooling on aerosol formation and evolution in backward-facing step flow
Large Eddy Simulation of evaporating spray using unstructured meshing
Modelling laminar multiphase dispersed flows using population balances in an adaptive mesh finite element framework
A numerical comparison of a hydraulic cavitation bubble and a laser-induced bubble
Identification of defects originated during the filling of cast pieces through particles modeling
|
|
|
21/7/2014
11:00 - 13:00 Potential-flow and Viscous-flow Simulations of Interfacial Flows, Waves and Free-surface Turbulence I Minisymposium organized by Lian Shen, Yuming Liu and Dick K.P. Yue |
MS189A Room: Tramuntana 2 Chair: Lian Shen |
|
Pulse ejector parameters optimization on the base of mathematical modeling
Solutal Marangoni instability in finite and infinite binary alloy systems with a miscibility gap
Study of nonlinear free-surface spike induced by bubble
On the dynamics of interfacial instability in vertical counter-current gas/liquid flows
Numerical simulation of a shock accelerated heavy gas cylinder
Numerical study of the spatial flow of abnormally viscous fluid in the extrusion mixer screw channel
|
|
|
21/7/2014
11:00 - 13:00 Solid-solid Phase Transformations at Various Length-scales I Minisymposium organized by Thomas Antretter and Rolf Mahnken |
MS080A Room: Xaloc Chair: Thomas Antretter |
|
Enhancement or suppression of structural phase transitions in Ti1−xAlxN by pressure and stress
Macroscopic and mesoscopic modeling based on the concept of generalized stresses for cutting simulations
Phase field approach to phase transformations, dislocations and their interaction
Numerical modelling of the thermo-mechanical material response of heavy plates during accelerated cooling in the steel industry
|
|
|
21/7/2014
11:00 - 13:00 Frontiers of Verification, Validation (V&V) and Uncertainty Quantification I Minisymposium organized by Luís Eça, François Hemez, James Kamm, Marisol Koslowski and William J. Rider |
MS210A Room: Salon Club Chair: James Kamm CoChair: James Glimm |
|
Predictive simulations for problems with solution non-uniqueness (Keynote Lecture)
Building adaptive stochastic models using low-cost output error estimates
Probabilistic finite element analysis of non linear systems: Application to tunnel excavation
Kriging-based dynamic adaptive sampling for effective uncertainty quantification
Effective representation and propagation of uncertainty through tabular multiphase equation-of-state models
Statistical Calibration in a Human Middle Ear FE Model
|
|
|
21/7/2014
11:00 - 13:00 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon I Minisymposium organized by Christian Soize |
MS009A Room: Yasmin A Chair: Christian Soize CoChair: Carlos Felippa |
|
Fluid-Structure Interaction: The many years of our collaborations with Roger Ohayon (Keynote Lecture)
On the PGD-based model order reduction in structural and fluid mechanics: A step forward parametric FSI
Structural-acoustic coupled systems with active-passive damping interface
Slamming
Implicit interfaces and anisotropic mesh adaptation for fluid structure interactions
Pseudo-local absorbing boundary condition for the simulation of water gravity waves in open domains
|
|
|
21/7/2014
11:00 - 13:00 Advanced Beam Models I Minisymposium organized by Dinar Camotim, Zuzana Dimitrovova and Rodrigo Gonçalves |
MS047A Room: Yasmin B Chair: Zuzana Dimitrovová CoChair: Rodrigo Gonçalves |
|
GBT linear buckling analysis of channel columns with multiple perforations
Influence of the GBT deformation modes for a rack section in linear and linear buckling analysis
A general model for the nonlinear analysis of beams including the effects of section distortions
Direct procedure for the determination of conventional modes within the GBT approach
Non-linear analysis of steel-concrete beams using Generalized Beam Theory
A mixed finite element for generalized beam theory
|
|
|
21/7/2014
11:00 - 13:00 Structural and Multidisciplinary Optimization I Minisymposium organized by Jose Madeira and Helder Rodrigues |
MS026A Room: Yasmin C Chair: Silvana Maria Afonso CoChair: Jose Madeira |
|
GLODS: Global and Local Optimization using Direct Search
Combined stacking sequence table and thickness optimization for laminate composite structures
Exploring frame structures with negative Poisson‘s ratio via mixed integer programming
Sensitivity analysis and shape optimization using isogeometric boundary element methods
Adaptive mesh decomposition strategies for topology optimization for multi-functional additive manufacture
A Semidefinite Programming algorithm for structural optimization with eigenvalues
|
|
|
21/7/2014
11:00 - 13:00 STS 08: Higher-Order Methods for Aerospace Applications I |
STS08A Room: Auditorium Chair: Koen Hillewaert CoChair: Peter Vincent |
|
A consistent finite element approach to Large Eddy Simulation revisited with higher-order elements II
Preliminary developments towards a high-order and efficient LES code for propulsion applications
Application of an explicit Discontinuous Galerkin scheme to turbulent flows at intermediate to high Reynolds numbers
Utilising high-order direct numerical simulation for transient aeronautics problems
PyFR: An open source framework for high-order computational fluid dynamics on streaming architectures
Numerical experiment of the flow past a T106C turbine blade using a Discontinuous Galerkin Method
|
|
|
21/7/2014
11:00 - 13:00 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics I Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051A Room: Sala A Chair: Rémi Abgrall CoChair: Jean-Marie LE GOUEZ |
|
AUSM like expression of HLLC scheme and its extension to all speed scheme
Reduced dissipation SLAU and AUSM+-up towards high resolution unstructured Grid simulations
An unsteady Shock-fitting technique for unstructured grids
High order shock detecting methods and applications
Residual distribution schemes for the computation of hypersonic flows with strong bow shock waves: enforcing total enthalpy conservation
A higher order flux for magnetohydrodynamics
|
|
|
21/7/2014
11:00 - 13:00 Multiscale Computational Mechanics of Materials I Minisymposium organized by Wing Kam Liu, Shaofan Li and Franck Vernerey |
MS260A Room: Sala B1 Chair: Shaofan Li CoChair: Wing Kam Liu |
|
Coupling the finite element method and molecular dynamics in the framework of the heterogeneous multiscale method
A continuum mechanical surrogate model for rod-like atomic structures based on geometrically exact beams
A bayesian framework for calibration and uncertainty quantification of coarse-grained atomistic models
A concurrent parallel multiscale algorithm for large 3D continuum/atomic simulations at finite temperature using LAMMPS
A Coarse-grid Model of Graphene Based on Molecular Structural Mechanics Approach
Mesoscale Simulation of Thin Polymer Films and the Connection to Nanocomposites
|
|
|
21/7/2014
11:00 - 13:00 Particle Methods for Micro- and Nano-flows I Minisymposium organized by Marco Ellero and Dmitry A. Fedosov |
MS045A Room: Sala B2 Chair: Dmitry Fedosov |
|
Reframing Dissipative Particle Dynamics (Keynote Lecture)
Simulation of particle suspension in simple and complex fluid media using Smoothed Particle Hydrodynamics
Towards a new algorithm for multiphase lattice Boltzmann simulations
Colloidal particles at liquid interfaces
Interplay of inertia and deformability on rheological properties of a suspension of capsules
|
|
|
21/7/2014
11:00 - 13:00 Direct and Inverse Methods for Cardiovascular and Pulmonary Biomechanics I Minisymposium organized by C. Alberto Figueroa, Marek Behr and Wolfgang Wall |
MS158A Room: Sala B3 Chair: C. Alberto Figueroa |
|
A model of the exercise response of coronary blood flow with an application to the coronary steal phenomenon
In-vivo assessment of valvular function: An inverse modeling approach
A sequential filtering-based framework for patient-specific parameter estimation and subsequent multiscale CFD simulations
A novel approach for uncertainty quantification in patient-specific cardiovascular mechanics
Determining permeability and diffusivity properties of the rat aortic media
Aspects of inverse problems in mechanical circulatory device design
|
|
|
21/7/2014
11:00 - 13:00 CFD in Wind Energy – From Wind Turbine Aerodynamics to Atmospheric Boundary Layer Flows I Minisymposium organized by Jari Hämäläinen, Gabor Janiga and Dominique Thévenin |
MS215A Room: Sala C1 Chair: Dominique Thévenin CoChair: Gábor Janiga |
|
Numerical modeling and validation of the wind flow over the lake wannsee
Large-eddy simulations for atmospheric boundary layer flows over complex terrains with applications in wind energy
Large-Eddy Simulation of canopy flow under thermal stratification
Computational Fluid Dynamics (CFD) simulations of an H-Darrieus rotor with different turbulence models
Coupled wind LES and ocean wave simulation with actuator disk or line models for offshore wind farm study
A finite element K − ε Model for onshore wind farm modelling
|
|
|
21/7/2014
11:00 - 13:00 Simulation of Cardiovascular Procedures and Devices I Minisymposium organized by Ferdinando Auricchio, Michele Conti, Simone Morganti and Alessandro Veneziani |
MS193A Room: Sala C2 Chair: Michele Conti CoChair: Simone Morganti |
|
A virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass (Keynote Lecture)
Finite element modeling of endovascular treatments
Simulation and optimization of a pulsatile ventricular assist device using isogeometric analysis and fluid-structure interaction
Computational prediction of abdominal aortic endografting
Finite element analysis of bioresorbable coronary stents
|
|
|
21/7/2014
11:00 - 13:00 Advanced Methods for the Analysis and Design of Tensile Structures I Minisymposium organized by Falko Dieringer, Roland Wüchner and Kai-Uwe Bletzinger |
MS083A Room: Sala C3 Chair: Michael Roland CoChair: Roland Wüchner |
|
Design of architectural membranes with isogeometric elements
3D continuum models of tensegrity modules with the effect of self-stress
A simulation of cat‘s cradle by geometrically nonlinear analysis with sliding nodes
3D Membrane theory
Intelligent façade deployable multilayer adaptive membrane for sun-shading and insulation control and optimisation
|
|
|
21/7/2014
11:00 - 13:00 Mechanics of Nanostructured Materials I Minisymposium organized by I-Ling Chang, Takayuki Kitamura, Takahiro Shimada and Chuin-Shan D. Chen |
MS223A Room: Sala D1 Chair: Takahiro Shimada CoChair: Nien-Ti Tsou |
|
Breakdown of fracture mechanics in nanoscale components (Keynote Lecture)
Fracture of two-dimensional structures of silicon – molecular dynamics simulation
Mechanical instability of cubic materials under uniaxial loading
Atomistically informed creep constitutive equation of nanocrystalline metal
Modeling of steric hindrance of nanoparticles
Surface stress calculations of bio-molecular adsorption on gold-coated micro-cantilever biosensor using molecular dynamics simulation
|
|
|
21/7/2014
11:00 - 13:00 Advances in Computational Cardiovascular Modeling and Simulation I Minisymposium organized by Daniel E. Hurtado, Ellen Kuhl and Michael Ortiz |
MS160A Room: Sala D2 Chair: Daniel Hurtado |
|
An In-silico framework for cardiac drug testing: Hypertrophic Cardiomyopathy tissue model and the effects of ranolazine on the electro-mechanic response of the ventricular septum
Electric propagation patterns in 3D acute ischemic heart using graphic processing units
Differential growth-induced residual stress in arteries and the heart
Blood flow modeling and application to non-invasive determination of arterial stiffness
Towards indirect in vivo measurement of material properties of aortic aneurysms: Determining the displacement field
|
|
|
21/7/2014
11:00 - 13:00 Advanced Numerical Methods for Cavitating Flows I Minisymposium organized by Nikolaus Adams, Steffen Schmidt and Eric Johnsen |
MS095A Room: Sala D3 Chair: Eric Johnsen |
|
Numerical simulation of cavitating flows by a mixture-energy-consistent two-phase flow model with thermodynamic relaxation
Potentials and limitations of equilibrium single-fluid models for prediction of cavitating flows
Towards an efficient simulation of cavitating flows with real gas effects and uncertainty quantification
High-resolution numerical method for compressible large-eddy simulation of cavitating liquid flows
Shock-induced bubble collapse in a vessel: Implications for vascular injury in shockwave lithotripsy
Direct simulations of the compressible Navier-Stokes equations for multiphase flows
|
|
|
21/7/2014
11:00 - 13:00 Advanced Gridding and Discretization Techniques for Petroleum Reservoir Simulation I Minisymposium organized by Paulo R.M. Lyra, Darlan K.E. Carvalho, Michael G. Edwards, Clovis R. Maliska and Régis K. Romeu |
MS035A Room: Sala D4 Chair: Paulo Lyra CoChair: Michael Edwards |
|
Coupling flow and geomechanics with fractures in porous media (Keynote Lecture)
A comparison of three discretization methods for the simulation of highly anisotropic reservoirs with tetrahedral grids
A very higher order cell centered finite volume scheme for the simulation of oil-water displacements in petroleum reservoirs
A Higher-Order Multidimensional Upstream Scheme for the Simulation of Two-Phase Flows in Porous Media
Discontinuous finite element formulations for miscible viscous fingering problems
Black oil reservoir simulation using monotone non-linear finite volume method on polyhedral meshes
|
|
|
21/7/2014
11:00 - 13:00 Computational Bone Biomechanics I Minisymposium organized by Zohar Yosibash and Ernst Rank |
MS028A Room: Sala D5 Chair: Zohar Yosibash CoChair: Ara Nazarian |
|
Lack of universal bone material laws limits accuracy in subject specific FE models (Keynote Lecture)
Elastostatic, acoustic and time-reversed simulation of bones by non-standard fictitious domain methods
Are finite element estimates of femur strength associated with fracture? Three clinical studies
A crushable foam material model for strength predictions of human bones
Prediction of spine and hip strength with BMD and FE models: Influence of gender
Investigation of a Finite Element solution for a mechanically stimulated biochemical fracture healing model
|
|
|
21/7/2014
11:00 - 13:00 Numerical Methods for Wave Propagation Problems and Design Applications I Minisymposium organized by Kazuhiko Abe and Toshiro Matsumoto |
MS177A Room: Sala D6 Chair: Kazuhisa Abe CoChair: Alessandra Aimi |
|
Calculations of eigenfrequencies of 2D elastic finite periodic structures using boundary element method
Simulation of guided waves in solids using the Scaled Boundary Finite Element Method
Numerical analysis of the damped wave equation by ’’energetic‘‘ weak formulations
Bloch theorem with revised boundary conditions applied to glide plane and screw axis symmetric, quasi-one-dimensional structures
SH wave scattering problems for multiple layered anisotropic inclusions
Shear wave propagation modeling in magnetic resonance elastography using the local interaction simulation approach
|
|
|
21/7/2014
11:00 - 13:00 Stability Issues of Finite Elements in Non-linear Solid Mechanics I Minisymposium organized by Stefanie Reese, Ferdinando Auricchio, Manfred Bischoff and Peter Wriggers |
MS218A Room: Sala E1 Chair: Stefanie Reese |
|
On the computation of stability points with least-squares mixed Finite Element Methods
Reduced integration with hourglass stabilization - issues of stability and robustness
A generalized three-dimensional cosserat point element for nonlinear orthotropic elastic materials
An isogeometric locking-free NURBS-based solid-shell element for geometric nonlinear analysis
Enhanced low order solid finite elements using incompatible inertia in explicit time integration for instability reduction
NP-hard problems in computational large deformation mechanics and canonical dual finite element method
|
|
|
21/7/2014
11:00 - 13:00 Multiphysics Simulations with Time Resolved Turbulent Flow Fields I Minisymposium organized by Dörte C. Sternel and Miriam Mehl |
MS125A Room: Sala E2 Chair: Dörte C. Sternel CoChair: Miriam Mehl |
|
Numerical simulation of turbulent FSI benchmark cases
Large-Eddy simulation and evaluation of the turbulent fluid-structure interaction benchmark FSI-PfS-2a
3D numerical simulations of human phonation
Adaptive FEM for time resolved multiphysics in turbulent flow
Parallel simulation of fluid-structure interactions with acoustic fluids
Coupling of turbulent flows with acoustic wave propagation
|
|
|
21/7/2014
11:00 - 13:00 Multi-scale and Multi-physics Computations in Fluids and Solids I Minisymposium organized by Yozo Mikata and Glaucio Paulino |
MS194A Room: Sala E3 Chair: Yozo Mikata CoChair: Seiichi Nomura |
|
Peridynamic Modeling on Wave Propagation and Dispersion Curves - Analytical Study
Micromechanics for multiple inclusion problems
Coupling of fuel perfomance and neutronic codes for PWR
A multiscale mass scaling approach for accelerating explicit dynamics computations using proper orthogonal decomposition
Numerical Simulation of Hydrogene Ignition in Channels at Supersonic Speeds
|
|
|
21/7/2014
11:00 - 13:00 Nanomechanics I Minisymposium organized by Nuno Silvestre and Konstantinos Tserpes |
MS016A Room: Sala E4 Chair: Nuno Silvestre CoChair: Konstantinos Tserpes |
|
Thermal boundary resistance effects in nanocomposites (Keynote Lecture)
Computational modelling of the compressive behaviour of CNT-reinforced aluminium composites
Multiscale modeling of a nanoparticle reinforced epoxy resin
Numerical modeling of nanoparticle-reinforced adhesively bonded joints
|
|
|
21/7/2014
11:00 - 13:00 Multiscale Modelling of Landslides and Debris Flows I Minisymposium organized by Wei Wu and Ronaldo I. Borja |
MS365A Room: Sala E5 Chair: Wei Wu |
|
PFEM for multi-fluids and solid interaction with fixed mesh and large time-steps
From discrete particles to continuum fields in the bulk, at boundaries, and in mixtures
Multi-scale modelling of segregation induced fingering instabilities in granular avalanches
Numerical modelling of hydrologically-driven slope instability by means of porous media mechanics
Collapse analysis of buildings subjected under seismic excitation, tsunami, and debris collision
|
|
|
21/7/2014
11:00 - 13:00 Optimization of Fluid Solid Coupling Solvers I Minisymposium organized by Elisabeth Longatte, Elie Hachem and Thierry Coupez |
MS197A Room: Sala E6 Chair: Elisabeth Longatte |
|
Theoretical model for the fluidelastic instability of tube bundles
On the sensitivity of the POD technique for fluid flows and Fluid-Structure Interaction problems
Multi-scale fluid-structure interaction models for integrated packaging systems
New immersed CAD method for the simulation of turbulent flows problems
A computation chain in fluid-structure interaction for marine applications
|
|
|
21/7/2014
11:00 - 13:00 Computational Contact Mechanics I Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044A Room: Sala F Chair: Giorgio Zavarise |
|
Thermo-mechanical rough surface contact of rubber-like solids
Transient thermomechanical contact problems
Thermal and contact FE analysis of a railway wheel in sliding-rolling motion
3-D micro-analysis of electrical contact resistance for spot welding
Identification of a finite element connector for the simulation of bolted joints
Multiscale modeling of chain-guide contact by using tests and FEM
|
|
|
21/7/2014
11:00 - 13:00 Computational Modeling of Fracture and Failure of Materials and Structures I Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226A Room: Sala H 1 Chair: Olivier Allix |
|
Simulations of accelerated corrosion tests in concrete prisms with a steel tube
A study of friction in dynamic fracture along bimaterial interfaces
Interfacial delayed-damage model for dynamic fracture and fragmentation
Study on homogenization methods for hardening and failure of ultra high strength steel with tailored material properties
Ductile fracture simulations by finite cover method with damage model
Discrete crack analysis of RC structure using hybrid-type penalty method with Delaunay triangulation
|
|
|
21/7/2014
11:00 - 13:00 Isogeometric Methods I Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049A Room: Sala H 2 Chair: Thomas J.R. Hughes |
|
Isogeometric analyses of beams and shells (Keynote Lecture)
Isogeometric Reissner - Mindlin shell analysis - geometries with kinks and non-conforming meshes
An isogeometric Reissner-Mindlin shell with Lagrange basis
Efficient and accurate numerical integration for high order immersed boundary methods
Projection methods for constrained problems in isogeometric analysis
Shape and displacement measurements using isogeometric stereo-correlation
|
|
|
21/7/2014
11:00 - 13:00 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials I Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012A Room: Sala H 3 Chair: Julien Yvonnet CoChair: Marc Geers |
|
Computational homogenization for transient phenomena in heterogeneous materials
Accelerated multiple temporal scale computation for fatigue loadings in composite materials
Numerical homogenization of random microstructures for structural mechanics
Filtering properties to improve FFT-based methods
Computational homogenization using high-performance, reduced-order modeling
Implementation of material modeling approaches at finite strains using a highly accurate numerical derivative scheme
|
|
|
21/7/2014
11:00 - 13:00 Computational Biomechanics I Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007A Room: Sala J Chair: to be confirmed |
|
A computational model of the cervical spine: Application to anterior cervical fusion analysis
Biomechanical Evaluation of Optimal Orthodontic Forces on Human Maxillary Teeth
The effect of implant position on the stress behavior of mandibular implant retained overdentures
Strain measurement of shoulder capsule using Finite Element Method
Modelling of heterogeneous material properties distribution on example of femur after THA
Optimized patient-specific implants
|
|
|
21/7/2014
11:00 - 13:00 Evaluation, Reliable Estimation, and Control of Computational Errors in Solid and Structural Mechanics I Minisymposium organized by Aram Soroushian, Peter Wriggers, Mazdak Tootkaboni and Ali Yahyapour |
MS262A Room: Business Centre I Chair: Aram Soroushian CoChair: Ali Yahyapour |
|
Dual error bounds for Kirchhoff plates (Keynote Lecture)
Error free evaluation of tensor functions and their application in finite-strain models
Verification of shell finite elements in the Girkmann benchmark problem
Purification of convergence an approach towards reliable error evaluation
Why do engineers make ill-conditioned FE models and what can we do about them?
Performance of a computational cost reduction technique in lengthy time interval analyses
|
|
|
21/7/2014
11:00 - 13:00 Developing Scientific Research Codes for Effective Utilization of Leading HPC Platforms I Minisymposium organized by Elias Balaras and Anshu Dubay |
MS188A Room: Business Centre II Chair: Elias Balaras |
|
HPC numerical libraries: Successes and next-generation challenges (Keynote Lecture)
The impact of community software in astrophysics
Toward exascale Simulations with the CFD code Nek5000
Developin software frameworks for petascale computations and beyond using dynamic graph approaches - lessons and achievements
Software development and management processes in the NOAA environmental software infrastructure and interoperability (NESII) group
Developing a software framework for fluid-structre interaction incompressible flow problems
|
|
|
21/7/2014
11:00 - 13:00 Multibody System Dynamics and Modal Reduction I Minisymposium organized by Pascal Ziegler and Johannes Gerstmayr |
MS239A Room: Sala de prensa I Chair: Pascal Ziegler CoChair: Alexander Humer |
|
Rigid-body simulation of a friction-locked chain drive mechanism
Calculation of crankshaft twist angle using multibody simulation and finite element method
Dynamic stress calculation in gear simulations using reduced elastic multibody systems
Heuristic method of dynamic stress analysis in multibody simulation using HPC
Development of industrial software for the simulation of bearing dynamics CABA3D
|
|
|
21/7/2014
11:00 - 13:00 Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others I Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia |
MS027A Room: Sala de prensa II Chair: Younane Abousleiman |
|
Two-way coupling in Reservoir-Geomechanical models: vertex-centered Galerkin Geomechanical model cell-centered and vertex-centered finite volume Reservoir models (Keynote Lecture)
A partition of unity based cohesive zone model for hydraulic fracturing
A computational model for CO2 leakage in heterogeneous formation
Comprehending the mechanism of vein formation - Insights from three-dimensional phase-field modeling and innovative post-processing techniques
A coupled FE-multiphasic approach for bacterial methane oxidation in landfill cover layers
Numerical modeling of sorption-desorption for porous media
|
|
|
21/7/2014
11:00 - 13:00 Multiscale Liver Simulation: A Holistic Model for Hepatic Function and Perfusion I Minisymposium organized by Tim Ricken and Daniel Werner |
MS155A Room: Sala de Reservas Chair: Tim Ricken CoChair: Daniel Werner |
|
Functional anatomy of the liver – hunting down the “white territories”
Spatially resolved simulation of glucose metabolization in the human liver
On a multiphasic continuum mechanical multiscale model for liver perfusion and metabolism
Multi-level modelling of the hepatic perfusion
|
|
|
13:00 - 14:00 Lunch Time |
|
|
14:00 - 16:00 TECHNICAL SESSIONS |
|
|
21/7/2014
14:00 - 16:00 Meshless and Related Methods, a Minisymposium Dedicated to Celebrate the 80th Birthday of Professor Janusz Orkisz II Minisymposium organized by Sergio Idelsohn, Pierre Villon, G.R. Liu, Paulo M. Pimenta and Suvranu De |
MS114B Room: Mare Nostrum A Chair: Guirong Liu CoChair: Paulo Pimenta |
|
Material point method in three-dimensional problems of granular flow
Radial basis function based meshless pdeudospectral method for higher order equations
RBF-based meshless approaches for frequency-domain analysis of heat conduction problems
Study of radial basis collocation method for wave propagation
An explicit dynamic method for a discrete element model using the principle of hybrid-type virtual work
A comparison of parallelization strategies for the material point method
|
|
|
21/7/2014
14:00 - 16:00 HPC-Based CFD Simulations for Industrial Applications II Minisymposium organized by Mariano Vázquez, Makoto Tsubokura , Takayuki Aoki and Mike Nicolai |
MS208B Room: Mare Nostrum B Chair: Mariano Vázquez |
|
Large-eddy simulation of turbulent flow around a car body using lattice-Boltzmann method on the TSUBAME supercomputer
Practical applications for the computational vehicle aerodynamics on the massively parallel supercomputer: Part 1, framework for the fully unstructured finite volume cells
Practical applications for the computational vehicle aerodynamics on the massively parallel supercomputer: Part 2, hierarchical cartesian grid approach utilizing dirty CAD data
Hybrid MPI/OpenMP parallel strategies for a high order Discontinuous Galerkin solver in aerodynamics
HPC-based LES for wind forces on building in Tokyo
Comparative study of parallelization methods using Open-MP and MPI with an unstructured RANS solver for practical applications
|
|
|
21/7/2014
14:00 - 16:00 Innovative Methods for Fluid-Structure Interaction II Minisymposium organized by Harald van Brummelen, Trond Kvamsdal and Roger Ohayon |
MS077B Room: Mare Nostrum C Chair: Harald van Brummelen CoChair: Trond Kvamsdal |
|
FSI modeling of ringsail parachutes with disreefing and modified geometric porosity (Keynote Lecture)
Large displacement simulations with an efficient mesh-connectivity-change moving mesh strategy
Robust and Efficient Methods for Wind Turbines
An adaptive time stepping procedure for monolithic fluid-structure interaction solvers
Towards partitioned fluid-structure interaction on massively parallel systems
Transonic nonlinear aeroelastic simulations using an harmonic balance method
|
|
|
21/7/2014
14:00 - 16:00 Computational Damage and Fracture Mechanics II Minisymposium organized by Michael Brünig and Larissa Driemeier |
MS008B Room: Mare Nostrum D Chair: Michael Brünig |
|
Micro-mechanical modeling of ductile damage and failure taking into account various stress-states
Micro-mechanical numerical analysis of ductile damage under dynamic loading conditions
A FEM model for prediction of fatigue crack initiation in forged M3:2 tool steel in high cycle fatigue
Damage mechanics approach for the analysis of casting materials under thermo-mechanical fatigue
Boundary element formulations applied to analysis of fracture problems in viscoelastic materials
Fatigue evaluation based on modified Green’s function approach considering temperature-dependent material properties
|
|
|
21/7/2014
14:00 - 16:00 Applications of Error Estimation and Model Adaptation in Computational Mechanics II Minisymposium organized by Ludovic Chamoin, Pedro Díez, Fredrik Larsson and Kris Van der Zee |
MS010B Room: Mare Nostrum E Chair: Ludovic Chamoin |
|
Driving iterative domain decomposition solver by objective of accuracy on quantity of interest (Keynote Lecture)
Contraction and convergence of goal-oriented adaptive Finite Element Methods
Goal-oriented error estimation and mesh adaptivity in three-dimensional elasticity problems
A discontinuous Petrov-Galerkin methodology for incompressible flow: Navier-Stokes
Temporal error estimation and adaptive time step control in unsteady flow simulations
Sharp estimates for some problems with fading memory
|
|
|
21/7/2014
14:00 - 16:00 Advances in Computational Methods for Inverse Problems II Minisymposium organized by Paul E. Barbone, Dan Givoli and Assad Oberai |
MS075B Room: Mare Nostrum F Chair: Assad Oberai CoChair: Paul Barbone |
|
Constructing optimal transport maps for Bayesian inverse problems (Keynote Lecture)
Accurate data assimilation for chaotic dynamical systems
Controlling Uncertainty in PDE-Constrained Optimization
Well-posed Bayesian geometric inverse problems arising in subsurface flow
Optimization of a random Cauchy problem in linear elasticity
Probabilistic model of dynamic boundary impedance matrices in high dimensions and for wide frequency bands of analysis
|
|
|
21/7/2014
14:00 - 16:00 Smart Materials and Structures II Minisymposium organized by Joachim Bluhm, Mieczyslaw Kuczma, Wieslaw Ostachowicz and Surjya Maiti |
MS161B Room: Llevant Chair: Joachim Bluhm CoChair: Surjya Kumar Maiti |
|
Parallel Spectral Element Method for simulation of elastic waves in Smart Structures (Keynote Lecture)
FEM calculations of crack growth patterns in ferroelectric multilayer actuators based on a continuum damage model
Model-based analysis and design of piezoelectric variable-friction tactile displays
Static behaviour of flextensional actuators with constricted hinges
A condensed approach to modeling and analysis of ferroelectric PZT at the morphotropic phase boundary
Parametric optimization of lightweight structures
|
|
|
21/7/2014
14:00 - 16:00 Advanced Computational Failure Analysis of Fiber Composite Structures II Minisymposium organized by Raimund Rolfes, Eelco Jansen and José Reinoso |
MS043B Room: Mestral Chair: Raimund Rolfes CoChair: Jose Reinoso |
|
Hybrid micro meso modeling approach to predict compressive failure of composites
Three dimensional damage-mode based constitutive model for fibre-reinforced composites
New Design Approach for Axially Compressed Fiber Composite Cylindrical Shells using a Multistep Sensitivity Method
Delamination characteristics of splices and doublers in glare laminates during buckling
Modeling the creasing process of paperboard
Effect of Delamination on the Strength of Laminated Curved Glass Beam
|
|
|
21/7/2014
14:00 - 16:00 Industrial Applications of Computational Fluid Dynamics and Related Techniques II |
CS658B Room: Ponent 1 Chair: Gabriel Bugeda |
|
Aerodynamic shape optimization of a 3D wing via volumetric B-Splines
Thermal design of power transformers via CFD
CFD simulation of LNG spillage
Problems of industrial air exhausting
Simulation of oxy-fuel combustion processes in industrial furnaces
Research on cavity flow around underwater 3D vehicle based on Potential Flow theory
|
|
|
21/7/2014
14:00 - 16:00 Advanced Methods in Computational Fluid Dynamics II |
CS655B Room: Ponent 2 Chair: Lakhdar Remaki CoChair: Goran Stipcich |
|
Algorithms for the Stochastic Simulation of Steady Nonequilibrium Flow
Towards a modular approach for unstructured shock-fitting
A 3-D Mach-uniform preconditioner for incompressible and subsonic flows
Comparing Kinetic energy preserving and Godunov schemes on the flow around a NACA0012
Aerodynamic fluctuating forces on a rotating cylinder
2D Incompressible viscous flows at moderate and high Reynolds numbers: A direct primitive variables approach
|
|
|
21/7/2014
14:00 - 16:00 Multiscale Methods and Applications in Computational Mechanics II Minisymposium organized by Weiqing Ren and Yang Xiang |
MS116B Room: Terral Chair: Weiqing Ren |
|
A numerical study of slippery Jeffery orbits and reciprocal relations
A micro/macro parareal algorithm for multiscale-in-time systems
A cell based particle method for modeling dynamic interfaces
Sharp interface model for solid-state dewetting problem with weak anisotropic surface energy
Application of our multiscale diffusion model to determination of drug distribution within tumor
Computational modeling of multiscale flows
|
|
|
21/7/2014
14:00 - 16:00 Instabilities in Solids Across Length Scales I Minisymposium organized by Dennis M. Kochmann and Oscar Lopez-Pamies |
MS099A Room: Tramuntana 1 Chair: Dennis Kochmann |
|
Folding of neo-Hookean bilayer systems under biaxial compression
Pattern formation finite element modeling for thin films on soft substrates
Crease-type solutions in a coated elastic half-space
Cavitation in rubber: An elastic instability or a fracture phenomenon?
Engineering the surface buckling of mono-layer supported graphene
|
|
|
21/7/2014
14:00 - 16:00 Water-Structure Impact I Minisymposium organized by James C. Campbell and Alessandro Iafrati |
MS238A Room: Tramuntana 2 Chair: James Campbell |
|
Numerical simulation and experimental validation of guided ditching tests
Finite element analysis of tensor skin under water impact
Prediction of aircraft structural response during ditching: An overview of the SMAES project
Advancement of semi-analytical Methods for Simulation of Aircraft Ditching
Innovative SPH methods for aircraft ditching
Large scale simulation of fluid-structure interaction using an Incompressible Smoothed Particle Hydrodynamics
|
|
|
21/7/2014
14:00 - 16:00 Evolutionary Algorithms and Metaheuristics in Civil Engineering and Construction Management I Minisymposium organized by Jorge Magalhaes-Mendes and David Greiner |
MS022A Room: Xaloc Chair: Jorge Magalhães-Mendes CoChair: David Greiner |
|
On Dedicated Evolutionary Algorithms for Large Non-linear Constrained Optimization Problems in Application to Residual Stresses Analysis
Multiobjective optimization of time-cost using a multi-mode genetic algorithm
Optimum design of shallow foundation using finite element analysis
A comparison of minimum constrained weight and fully stressed design problems in discrete cross-section type bar structures
Hybrid approach to identification of elastic thin plate parameters applying GWM and ANN
|
|
|
21/7/2014
14:00 - 16:00 Frontiers of Verification, Validation (V&V) and Uncertainty Quantification II Minisymposium organized by Luís Eça, François Hemez, James Kamm, Marisol Koslowski and William J. Rider |
MS210B Room: Salon Club Chair: Marisol Koslowski CoChair: William Rider |
|
Automatic model selection for verification (Keynote Lecture)
The nonlinear error transport method for arbitrary Lagrangian-Eulerian computations
Info-gap analysis for numerical uncertainty associated with truncation error
Automatic error estimation and verification using an adaptive wavelet method
Identifying and treating numerical uncertainties in the code verification process
Smooth estimate of the truncation error for unstructured mesh finite volume methods
|
|
|
21/7/2014
14:00 - 16:00 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon II Minisymposium organized by Christian Soize |
MS009B Room: Yasmin A Chair: K. C. Park CoChair: Christian Soize |
|
Isochronous Integrators [iIntgerators] and a New Generation Computational Methods Framework for Multiphysics/Multiscale Applications (Keynote Lecture)
On a Discontinuous Galerkin method and its extension to numerical model coupling
Tip advancement an pressure distribution in hydraulic fracturing
Crack identification in elastic structures using time reversal
Design and performance of a stiff wave barrier in the soil using 2.5D and 3D FE-BE models
A temporal integrator based on series resommation. Applications to fluid-structure interaction
|
|
|
21/7/2014
14:00 - 16:00 Advanced Beam Models II Minisymposium organized by Dinar Camotim, Zuzana Dimitrovova and Rodrigo Gonçalves |
MS047B Room: Yasmin B Chair: Rodrigo Gonçalves CoChair: Zuzana Dimitrovová |
|
A 1D model for the nonlinear analysis of TWBs
A force-based formulation for the analysis of frames with non-holonomic hardening plastic hinges
A nonlinear 1D model of layered tubular beam
Buckling and post-buckling analysis of sandwich beam-columns
Cross-sectional analysis of pre-twisted thick beams using variational asymptotic method
Mixed formulation for modelling self-centring post-tensioned rocking beams and columns
|
|
|
21/7/2014
14:00 - 16:00 Structural and Multidisciplinary Optimization II Minisymposium organized by Jose Madeira and Helder Rodrigues |
MS026B Room: Yasmin C Chair: Jose Herskovits CoChair: Jose Madeira |
|
Using topology optimization in lightweight design of fatigue resistant structures
Computational optimization of flexible adhesives
Multidisciplinary analysis of the DLR SpaceLiner design concept by different optimization techniques
Form-finding of interlaced space structures
New methodologies in reliability-based design optimization for aerospace structures
The development and application of tailored test problems for meta-simulation of multidisciplinary optimization of vehicle structures
|
|
|
21/7/2014
14:00 - 16:00 STS 08: Higher-Order Methods for Aerospace Applications II |
STS08B Room: Auditorium Chair: Norbert Kroll CoChair: Francesco Bassi |
|
Higher order and adaptive Discontinuous Galerkin methods for 3D aerodynamic flows
Implementation of a hybrid RANS-LES approach in an implicit very high-order Discontinuous Galerkin solver
Higher-order least-squares reconstruction for turbulent aerodynamic flows
Transitional flow simulation in turbomachinery with a high-order accurate method
Flow computations of industrial cases with high-order Discontinuous Galerkin scheme
Application of a Discontinuous Galerkin method for the simulation of turbulent flow configurations on hybrid meshes
|
|
|
21/7/2014
14:00 - 16:00 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics II Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051B Room: Sala A Chair: Eiji SHIMA CoChair: Matteo Parsani |
|
A cell-centered pressure correction scheme for the compressible Euler equations
An explicit staggered scheme for the compressible Euler equations
Low-Mach preconditioned boundary conditions for compressible solvers
Numerical treatment of turbulent Low-Mach-Flow for turbine cooling applications
Momentum interpolation for quasi one-dimensional unsteady low Mach number flows with acoustics
A stable and accurate compressible low mach scheme for unsteady flow calculation
|
|
|
21/7/2014
14:00 - 16:00 Multiscale Computational Mechanics of Materials II Minisymposium organized by Wing Kam Liu, Shaofan Li and Franck Vernerey |
MS260B Room: Sala B1 Chair: Wing Kam Liu CoChair: Shaofan Li |
|
Heterogeneous continuum theory
Archetype-blending continuum theory for multiscale fatigue predictions
A fully micromechanical motivated material law for filled elastomer
Using GPU accelerators for crystal plasticity simulations
Improving the convergence of bounds for effective elastic parameters of heterogeneous materials
Elastic fields and stress intensity factors of cracks interacting with inclusions
|
|
|
21/7/2014
14:00 - 16:00 Particle Methods for Micro- and Nano-flows II Minisymposium organized by Marco Ellero and Dmitry A. Fedosov |
MS045B Room: Sala B2 Chair: Marco Ellero |
|
Dissipative Particle Dynamics (DPD) Methods for Biological Flows (Keynote Lecture)
The response of semi-flexible dens polymer brushes to shear flow
New inflow/outflow boundary conditions for particle-based modeling of suspension flows in networks
Mesoscopic simulations of polymeric systems by Responsive Particle Dynamics
Simulation of semidilute supensions by dissipative particle dynamics
|
|
|
21/7/2014
14:00 - 16:00 Direct and Inverse Methods for Cardiovascular and Pulmonary Biomechanics II Minisymposium organized by C. Alberto Figueroa, Marek Behr and Wolfgang Wall |
MS158B Room: Sala B3 Chair: C. Alberto Figueroa |
|
Estimation of mechanical properties of arterial wall from dynamic volume CT images
A Computational Framework for Multiscale Modeling of the Mitral Valve
Stabilized reduced basis method for parametrized scalar advection-diffusion problems at higher Peclet number: roles of the boundary layers and inner fronts
An improved coronary model for one-dimensional pressure-flow analysis
Blood flow in the thoracic aorta and its relation to geometrical characteristics
Stress-based and strain-based hemolysis estimation for medical devices
|
|
|
21/7/2014
14:00 - 16:00 CFD in Wind Energy – From Wind Turbine Aerodynamics to Atmospheric Boundary Layer Flows II Minisymposium organized by Jari Hämäläinen, Gabor Janiga and Dominique Thévenin |
MS215B Room: Sala C1 Chair: Jari Hämäläinen |
|
Flow control using a DBD plasma actuator for horizontal-axis wind turbine blades of simple experimental model
Coupled CFD/CSD method for wind turbines
Aerodynamic loads on a fixed wind turbine blade with Gurney flap
Experimental and CFD analysis of the flow in the wake of a vertical axis wind turbine
|
|
|
21/7/2014
14:00 - 16:00 Simulation of Cardiovascular Procedures and Devices II Minisymposium organized by Ferdinando Auricchio, Michele Conti, Simone Morganti and Alessandro Veneziani |
MS193B Room: Sala C2 Chair: Michele Conti |
|
Patient-specific finite element analysis of coronary stenting: a focus on long lesions
Minimally invasive endovascular procedures simulations using 1d haemodynamics
Numerical simulations of an anti-thrombus inferior vena cava filter with CFD and FSI
Flow diverter stent performance at different flow rate conditions
|
|
|
21/7/2014
14:00 - 16:00 Advanced Methods for the Analysis and Design of Tensile Structures II Minisymposium organized by Falko Dieringer, Roland Wüchner and Kai-Uwe Bletzinger |
MS083B Room: Sala C3 Chair: Benedikt Philipp |
|
Numerical simulation of structural behaviour of membrane restrained elastic gridshells
Different determination procedures for stiffness parameters of woven fabrics and their impact in the membrane structure analysis
Simulation and Experiment Research on 2D Open Membrane Structure
Aleatoric & espistemic uncertainty in the analysis of tensile structures
Testing and isogeometric structural analysis of membranes subject to large deflections
|
|
|
21/7/2014
14:00 - 16:00 Mechanics of Nanostructured Materials II Minisymposium organized by I-Ling Chang, Takayuki Kitamura, Takahiro Shimada and Chuin-Shan D. Chen |
MS223B Room: Sala D1 Chair: Yunche Wang CoChair: I-Ling Chang |
|
Molecular dynamics study of calcium silicate hydrate on porous silica (Keynote Lecture)
High strain compression behaviour of nano-structured hierarchical irregular honeycombs
The study on shape memory properties of Ni-Al alloys by molecular dynamics simulation
Modelling of single-wall carbon nanotubes mechanical behaviour
Plane problems of magneto-electro-elastic fibrous composites
Electro-Elastic Coupling Behavior of CNT-based Nanostructures
|
|
|
21/7/2014
14:00 - 16:00 Advances in Computational Cardiovascular Modeling and Simulation II Minisymposium organized by Daniel E. Hurtado, Ellen Kuhl and Michael Ortiz |
MS160B Room: Sala D2 Chair: Daniel Hurtado |
|
A lightweight approach to parallel adaptivity in electrophysiology
Computational modeling of cardiac dysfunctions
Material modeling of cardiac valve tissue
Electromechanical cardiac arrhythmias: experiments, theory and simulations
Estimation of patient-specific parameters in mechanical modelling of dilated cardiomyopathy
|
|
|
21/7/2014
14:00 - 16:00 Advanced Numerical Methods for Cavitating Flows II Minisymposium organized by Nikolaus Adams, Steffen Schmidt and Eric Johnsen |
MS095B Room: Sala D3 Chair: Nikolaus Adams |
|
Account of compressibility effects within pressure-based Euler-eEuler approaches to cavitating flow simulations
A new methodology for estimating cavitation erosion: Application on a high speed cavitation test rig
Estimation of incubation times through numerical simulation of 3-D unsteady cavitating flows
Modelling of tip vortex cavitation for engineering applications in OpenFOAM
Some modifications of bubble model for cavitating flow simulations
|
|
|
21/7/2014
14:00 - 16:00 Advanced Gridding and Discretization Techniques for Petroleum Reservoir Simulation II Minisymposium organized by Paulo R.M. Lyra, Darlan K.E. Carvalho, Michael G. Edwards, Clovis R. Maliska and Régis K. Romeu |
MS035B Room: Sala D4 Chair: Clovis Maliska CoChair: Darlan Karlo Elisiário de Carvalho |
|
Multiscale methods as spatiotemporal grid-refinement techniques (Keynote Lecture)
Multiscale CVD-MPFA finite-volume formulations on general grids
Development of data models and velocity interpolation methods for streamline trajectories on unstructured grids
Representing dependent variable discontinuities in hybrid finite-element finite-volume models of hdrocarbon reservoirs: comparisons between element-centered with multiplicated node method for unstructured grids
Hexahedral mixed finite elements for flow calculations
Mixed finite element model implementation for a petroleum reservoir simulation
|
|
|
21/7/2014
14:00 - 16:00 Computational Bone Biomechanics II Minisymposium organized by Zohar Yosibash and Ernst Rank |
MS028B Room: Sala D5 Chair: Ernst Rank CoChair: Dieter Pahr |
|
Intra-voxel micro-elasto-plasticity for CT-based patient-specific fracture risk assessment of vertebrae (Keynote Lecture)
Modeling mechanochemical couplings in trabecular and osteonal bone remodeling
Patient-specific finite element analysis of long bones- Applications in clinical practice
P-FEA of pathological human femurs
Improvements in treatment planning and fracture prediction in patients with skeletal metastasis with CT-based rigidity analysis
|
|
|
21/7/2014
14:00 - 16:00 Numerical Methods for Wave Propagation Problems and Design Applications II Minisymposium organized by Kazuhiko Abe and Toshiro Matsumoto |
MS177B Room: Sala D6 Chair: Toshiro Matsumoto CoChair: Hauke Gravenkamp |
|
Mode analysis for an elastic waveguide in a periodic composite
Comparison of higuer order methods in time and space for the numerical simulation of ultrasonic wave propagation
An improved wave / finite element formulation for studying high-order wave propagation in large-scaled waveguides
Thermal stress oscillation behavior in a functionally graded material thin film
Locally resonant acoustic metamaterials with different inclusions
Solutions for distributed harmonic loadings on axially symmetric area in layered half-space
|
|
|
21/7/2014
14:00 - 16:00 Stability Issues of Finite Elements in Non-linear Solid Mechanics II Minisymposium organized by Stefanie Reese, Ferdinando Auricchio, Manfred Bischoff and Peter Wriggers |
MS218B Room: Sala E1 Chair: Stefanie Reese |
|
Stability aspects of pressurized membranes
A reduced basis technique with the co-rotational kinematics for nonlinear buckling analysis of structures
Thermal post-buckling analysis of imperfect thin and thick plates resting on two-parameter elastic foundation
Buckling strength assessment of cylindrical metal silo containing granular solids
Research on the stability behaviors of single-layer shells based on the whole-course response analysis method
Blast buckling of thin-walled metal tanks
|
|
|
21/7/2014
14:00 - 16:00 Multiphysics Simulations with Time Resolved Turbulent Flow Fields II Minisymposium organized by Dörte C. Sternel and Miriam Mehl |
MS125B Room: Sala E2 Chair: Dörte C. Sternel |
|
Solution-adaptive grid resolution for fluid structure interaction
Towards multi-scale transport simulation in complex geometries with advanced Lattice Boltzmann methods on CPUs and GPGPUs
Efficiency and robustness of implicit multigrid methods for turbulent combustion
Study on turbulent mixing induced by Rayleigh-Taylor instability using the RANS model
Numerical investigation of High Reynolds number von Karman flow
Simulation of turbulent flows past 3D complex geometries using anisotropic adaptation technique
|
|
|
21/7/2014
14:00 - 16:00 Multi-scale and Multi-physics Computations in Fluids and Solids II Minisymposium organized by Yozo Mikata and Glaucio Paulino |
MS194B Room: Sala E3 Chair: Yozo Mikata CoChair: Seiichi Nomura |
|
Multiscale and multiphase approach for solidification processes
Coupling lattice Boltzmann and atomistic models for fluids
Modelling of fluid, particle and structure interactions in a tumbling ball mill for grinding of minerals
A homogenization approach to fresch concrete flow through reinforcing bars
Numerical simulation of transpiration cooling with a mixture of thermally perfect gases
Numerical study of temperature and streamfuction patterns before full convection in geothermal cells of Bénard type
|
|
|
21/7/2014
14:00 - 16:00 Nanomechanics II Minisymposium organized by Nuno Silvestre and Konstantinos Tserpes |
MS016B Room: Sala E4 Chair: Konstantinos Tserpes CoChair: Nuno Silvestre |
|
Nanofluids for enhanced oil recovery: Molecular simulations and mechanism
Curved folds on supported graphene under compression
Objectivity in molecular dynamics simulation
Surface effects on mechanical properties and instability of FCC nanowires and nanofilms
|
|
|
21/7/2014
14:00 - 16:00 Multiscale Modelling of Landslides and Debris Flows II Minisymposium organized by Wei Wu and Ronaldo I. Borja |
MS365B Room: Sala E5 Chair: Wei Wu |
|
Implementation of a constitutive model for the finite element analysis of landslide triggered by rainfall
Viscoplastic regularization of strain localization in fluid-saturated porous media
A model for non-isothermal variably saturated porous media in dynamics
Modeling and numerical simulation of two-layer debris flows
|
|
|
21/7/2014
14:00 - 16:00 Scale-dependent plasticity: Experiments, Theory and Numerical Modeling I Minisymposium organized by Thomas Böhlke, Stefan Sandfeld and Stephan Wulfinghoff |
MS201A Room: Sala E6 Chair: Eric Bayerschen CoChair: Thomas Böhlke |
|
Experimental characterization of micro plasticity and dislocation microstructures
Dislocation density distribution around an indent in single-crystalline Nickel: Comparing nonlocal crystal plasticity finite element predictions with experiments
A computational study of plastic flow by dislocation transport in a two-phase microstructure
Continuum dislocation microplasticity modeling of single crystals
On the plastic spin in an isotropic small deformation gradient plasticity theory
|
|
|
21/7/2014
14:00 - 16:00 Computational Contact Mechanics II Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044B Room: Sala F Chair: Vladislav A. Yastrebov |
|
Contact constitutive laws for fiber-reinforced composite materials
A comparative evaluation of coupled mixed-mode cohesive zone laws for interfacial debonding
A non-symmetric integral approximation of large sliding frictional contact problems of deformable bodies based on ray-tracing
On a new method to solve contact problems with an evolving level-set
Contact analysis in the presence of an ellipsoidal inhomogeneity within a viscoelastic half space
A local optimal contact condition in 2D and 3D
|
|
|
21/7/2014
14:00 - 16:00 Computational Modeling of Fracture and Failure of Materials and Structures II Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226B Room: Sala H 1 Chair: Robert Haber |
|
Modeling failure using the convective particle domain interpolation method in a shock physics hydrocode
Fluid flow and heat transfer effects on crack growth in solid oxide fuel cell electrodes
Numerical study on the dynamic fracture propagation in fibre-reinforced concrete
Higher order methods for the simulation of curvilinear fracture propagation in multi-physics problems
A parallel, explicit, high-order discontinuous Galerkin method for dynamic crack propagation in brittle fracture
Modeling and simulation fracture in brittle materials with anisotropic surface energy
|
|
|
21/7/2014
14:00 - 16:00 Isogeometric Methods II Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049B Room: Sala H 2 Chair: Alessandro Reali |
|
Isogeometric one-parameter formulations for shear deformable structures (Keynote Lecture)
Isogeometric analysis of gradient elastic Kirchhoff plates
Isogeometric large deformation 3D Timoshenko beam
Enhancing isogeometric analysis by the scaled boundary technique
An object oriented design for an isogeometric software library, introducing igatools
Using IGATOOLS in industrial environments: integration with existing CAD systems and Finite Element solvers
|
|
|
21/7/2014
14:00 - 16:00 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials II Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012B Room: Sala H 3 Chair: Kenjiro Terada CoChair: Varvara Kouznetsova |
|
On the convergence of three iterative FFT-based methods for computing the mechanical response of composite materials
Multiscale modeling of soft matter friction: Computational framework and elastic boundary layers
Multi-scale modelling of delamination through fibrillation
Computational homogenisation of fibre reinforced composites
Statistical multiscale homogenization modelling of polymeric nanocomposites
Computational modeling of heterogeneous structures without scale separation: an approach based on nonlocal filter-based homogenization
|
|
|
21/7/2014
14:00 - 16:00 Computational Biomechanics II Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007B Room: Sala J Chair: Johan Hoffman CoChair: Matthias Mayr |
|
Preliminary study of the impact of spinal cord nerve roots and denticulate ligaments on drug movement in the cervical spinal subarachnoid space (Keynote Lecture)
Finite element simulation of blood flow in the left ventricle
Coupling of finite element and finite volume methods for fluid-structure-interaction in a monolithic scheme
Effect of intraocular pressure and cerebrospinal fluid pressure on retinal hemodynamics
Influence of blood flow change by the deformation of stented parent artery in an intracranial aneurysm
3D fluid-structure interaction simulations of a commercial bioprosthetic valve
|
|
|
21/7/2014
14:00 - 16:00 Flow Dynamics and Magnetic Resonance: Validation and Prediction I Minisymposium organized by Jan Korvink and Andreas Greiner |
MS053A Room: Business Centre I Chair: Jan Korvink |
|
Tracer transport in human arteries affects MRI-based perfusion quantification
A particle based platform for flow simulation with magnetic and other degrees of freedom
Yelling out for theory - spatially selective NMR at the length scale of diffusion
From jet turbines to human hearts: Fluid dynamics mapping with MRI
|
|
|
21/7/2014
14:00 - 16:00 Computational Challenges in Granular Flows I Minisymposium organized by Thomas Weinhart, Anthony R. Thornton and Itai Einav |
MS187A Room: Business Centre II Chair: Thomas Weinhart |
|
The material point method for the collapse simulation of the granular accumulated structure
Effect of particle surface friction on constitutive relation for steady granular flow
NEOShield Study on Asteroid Mitigation: simulation of impacts into hazardous bodies modeled as collections of grains
Hybrid FE/FV methods for evaluating wall effects in structured porous media
Well-posed and ill-posed behaviour of the mu(I)-rheology for granular flows
On boundary approximation for voxel-based simulation of granular flow
|
|
|
21/7/2014
14:00 - 16:00 Multibody System Dynamics and Modal Reduction II Minisymposium organized by Pascal Ziegler and Johannes Gerstmayr |
MS239B Room: Sala de prensa I Chair: Johannes Gerstmayr CoChair: Thomas Leitz |
|
Multibody dynamics method for immersed tunnel subjected to longitudinal seismic loading
A modal analysis method for structural models with non-modal damping
Modal derivatives based reduction method for finite deflections in floating frame
Nonlinear manifold for model order reduction of geometrically nonlinear structural dynamics
Interpolation strategies for non-linear parametric model order reduction in gear contact simulation
|
|
|
21/7/2014
14:00 - 16:00 Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others II Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia |
MS027B Room: Sala de prensa II Chair: Jean H. Prevost |
|
Simulating leak-off in shale hydraulic fracturing using dual- and triple- poro-thermo-elastic anisotropic solutions
Constitutive formulation, localization and failure analysis of porous materials like concrete subjected to high temperature
Multi-physics modelling of the consolidation processes in variably saturated elasto-plastic soils due to high temperature
Salt diffusion and crystallization in masonry walls: A comparison between chlorides and sulphates
Quasi-static response for a multilayered half space using a thermal non-equilibrium model
Developing a coupled thermal-mechanical-porous model for electrolyte flow in a molten salt battery
|
|
|
21/7/2014
14:00 - 16:00 Multiscale Liver Simulation: A Holistic Model for Hepatic Function and Perfusion II Minisymposium organized by Tim Ricken and Daniel Werner |
MS155B Room: Sala de Reservas Chair: Charlotte Debbaut CoChair: Jennifer Siggers |
|
Complex hierarchical modeling of the dynamic perfusion test: application to liver
Double porous medium model of blood and interstitial flow in the liver
Liver hemodynamics modeling during partial hepatectomy
LISA - Liver Surgery Analyzer software development
|
|
|
16:00 - 16:30 Coffee Break & Poster Sessions |
|
|
16:30 - 18:30 TECHNICAL SESSIONS |
|
|
21/7/2014
16:30 - 18:30 Meshless and Related Methods, a Minisymposium Dedicated to Celebrate the 80th Birthday of Professor Janusz Orkisz III Minisymposium organized by Sergio Idelsohn, Pierre Villon, G.R. Liu, Paulo M. Pimenta and Suvranu De |
MS114C Room: Mare Nostrum A Chair: Suvranu De CoChair: Janusz Orkisz |
|
Hierarchical derivation of shape functions and stiffness matrix calculation of EFG meshless methods
Analysis of cracks in bi-materials/composites with variable order singularity using meshless method
Compared computational performances of Galerkin approximations for perturbed variable-coefficient differential equations, one-dimensional analysis
Efficient and highly accurate high order meshless methods based on the Hu-Washizu variational principle
Meshless analysis of shear deformable shells: Kinks and multi-region problems
Application of different models for modeling abrasive wear
Weakened weak (W2) form methods: Theory, formulation and applications
|
|
|
21/7/2014
16:30 - 18:30 HPC-Based CFD Simulations for Industrial Applications III Minisymposium organized by Mariano Vázquez, Makoto Tsubokura , Takayuki Aoki and Mike Nicolai |
MS208C Room: Mare Nostrum B Chair: Mike Nicolai |
|
A novel CAA approach in OpenFOAM for computation of sound fields
Direct simulations of acoustic radiation around a trailing edge with an upstream kink shape
Direct numerical simulation of flashback in turbulent channel flow
Numerical simulation of the reacting flow field in a rotary kiln
Large-eddy simulation of a pulverized coal combustion in a multi-burner system
Large Eddy Simulation of flow inside the low pressure vessel of an Advanced Gas-cooled reactor
|
|
|
21/7/2014
16:30 - 18:30 Innovative Methods for Fluid-Structure Interaction III Minisymposium organized by Harald van Brummelen, Trond Kvamsdal and Roger Ohayon |
MS077C Room: Mare Nostrum C Chair: Trond Kvamsdal CoChair: Harald van Brummelen |
|
Estimation of element-based zero-stress state for arterial FSI computations (Keynote Lecture)
Multiscale tecniques for the coupling of 3D-1D FSI equations system in compliant vessels
Unified Lagrangian formulation for fluid-structure interaction problems with thermal coupling using PFEM
Robin-Robin partitioned procedures for fluid-structure interaction problems in haemodynamics
Second-order time-accurate explicit schemes for the interaction of a thin-walled structure with an incompressible fluid
On the modelling of turbulent fluid-structure interaction. Application to a channel flow around a cantilever plate attached behind a circular cylinder
A Hybrid Mesh Linear Harmonic Solver for the Aeroelastic Analysis of Turbomachinery
|
|
|
21/7/2014
16:30 - 18:30 Computational Damage and Fracture Mechanics III Minisymposium organized by Michael Brünig and Larissa Driemeier |
MS008C Room: Mare Nostrum D Chair: Michael Brünig |
|
Effects of defects distribution on fragment size of dynamic fragmentation
On the application of the method of difference potentials to linear elastic fracture mechanics
Simulation of wave propagation and impact damage in brittle materials using the peridynamics technique
Thermoelastodynamic crack analysis in functionally graded materials under impact loading
Multisurface damage-plasticity constitutive model for concrete
Numerical study on fracture patterns and crack growth on concrete under impact loading
Numerical modelling of reinforced concrete structures under impact with a mixed discrete element / finite element approach
|
|
|
21/7/2014
16:30 - 18:30 Applications of Error Estimation and Model Adaptation in Computational Mechanics III Minisymposium organized by Ludovic Chamoin, Pedro Díez, Fredrik Larsson and Kris Van der Zee |
MS010C Room: Mare Nostrum E Chair: Ludovic Chamoin |
|
On adaptive control of fine-scale errors in two-scale finite element analysis (Keynote Lecture)
A discontinuous Galerkin local orthogonal decomposition method for elliptic multiscale problems
Adaptive discretization, regularization, linearization, and algebraic solution in unsteady nonlinear problems
An adaptive multiscale method for the Stokes problem in porous media
Efficient modeling of random heterogeneous materials with an uniform probability density function
Modal-based goal-oriented error assessment and adaptivity for structural dynamics
Phase-field driven goal-oriented model adaptivity for blending schemes toward optimized multiscale modeling
|
|
|
21/7/2014
16:30 - 18:30 Advances in Computational Methods for Inverse Problems III Minisymposium organized by Paul E. Barbone, Dan Givoli and Assad Oberai |
MS075C Room: Mare Nostrum F Chair: Paul Barbone CoChair: Dan Givoli |
|
Why the obstacle reconstruction by topological sensitivity may work (Keynote Lecture)
Goal-oriented strategy for the updating of mechanical models
A regularized Newton method for the solution of an inverse obstacle scattering problem in a fluid-solid interaction
An adjoint approach for inverse analysis in photoacoustic imaging using the hybridizable Discontinuous Galerkin method
Curvature rate approach to the estimation of the stiffness distribution in structures
Imaging extended reflectors in two-dimensional waveguides
|
|
|
21/7/2014
16:30 - 18:30 New Trends in Numerical Methods for Multi-material Compressible Fluid Flows I Minisymposium organized by Raphael Loubère, Pierre-Henri Maire and Andrew Barlow |
MS179A Room: Llevant Chair: Raphael Loubere CoChair: Andrew Barlow |
|
A cell centered finite volume scheme for solving a vectorial diffusion equation on unstructured grids. Application to the compressible Navier-Stokes equations
Positivity preservation property of cell-centered Lagrangian schemes and extension to high-orders of accuracy
A 3D Symmetric cell-centered Lagrangian scheme based on a multi-dimensional Minmod limiter
A high-order finite element approach for treating multi-material zones in ALE hydrodynamics
Further exploration of the Lagrangian CSTS (Conservative Space- and Time-Staggered) hydrodynamic scheme
Combination of intersection- and swept-based methods for single-material remap
|
|
|
21/7/2014
16:30 - 18:30 Advances in Finite Element Methods for Tetrahedral Mesh Computations I Minisymposium organized by Guglielmo Scovazzi, Micheal Gee and Elie Hachem |
MS209A Room: Mestral Chair: Michael Gee CoChair: Guglielmo Scovazzi |
|
Transient fluid and solid dynamics on linear tetrahedral finite elements: An accurate and stable variational multi-scale approach
Advances in the use of simplicial finite elements for flow problems
A stabilised Petrov-Galerkin formulation for linear tetrahedral elements in compressible, nearly incompressible and truly incompressible fast dynamics
An edge based vertex centred upwind finite volume method for Lagrangian solid dynamics
A corotational tetrahedral element for large-displacement analysis of SMA structures
A Locking-free smoothed finite element formulation (modified selective FS/NS-FEM-T4) with tetrahedral mesh rezoning for large deformation problems
|
|
|
21/7/2014
16:30 - 18:30 Industrial Applications of Computational Fluid Dynamics and Related Techniques III |
CS658C Room: Ponent 1 Chair: Fermin Navarrina |
|
Direct numerical simulation of flows over a cavity with flow control using a moving bottom wall
CFD studies for prediction of flow separation from aircraft tail surfaces
3D CFD analysis of a twin screw expander for small scale ORC systems
Aerodynamic Effect of a Seam of Baseball
The study of flow regimes around an oscillating circular cylinder
A CFD based investigation of the influence of medium parameters on the transcritical R774 ejector
A numerical investigation to suppress distortions of large deployable reflector in space during earth eclipse
|
|
|
21/7/2014
16:30 - 18:30 Advanced Methods in Computational Fluid Dynamics III |
CS655C Room: Ponent 2 Chair: José París CoChair: Ramon Codina |
|
Limiting strategies based on time evolution
Time-dependent instabilities in flows of viscous and viscoelastic fluids in curved ducts of square cross-section
Dynamic fluid-structure interaction analysis of water-pipe systems
Using of the entropy index in the inlet boundary condition
Numerical investigation on unsteady aerodynamics of 2d airfoil under unsteady condition
Finite element method for a slit model with damping of air viscosity
|
|
|
21/7/2014
16:30 - 18:30 Multiscale Methods and Applications in Computational Mechanics III Minisymposium organized by Weiqing Ren and Yang Xiang |
MS116C Room: Terral Chair: Yang Xiang |
|
Quantized vortex stability and dynamics in superfluidity and superconductivity
Computation of saddle point and its application on nucleation
The string method for the study of complex energy landscapes and rare events
Weakly nonlinear analysis of shallow mixing layers with variable friction
Capturing aerosol droplet nucleation and condensation bursts using PISO and TVD schemes
Bridging multi-scale method to consider the effects of local deformations in the analysis of composite thin-walled members
Full C1 continuity multiscale second-order computational homogenization approach
|
|
|
21/7/2014
16:30 - 18:30 Modelling of Medium to Dense Fluid-particle Flows I Minisymposium organized by Christoph Kloss, Stefan Pirker, Christoph Goniva, Stefan Radl and Simon Schneiderbauer |
MS072A Room: Tramuntana 1 Chair: Christoph Kloss |
|
Analysis of drag models for Euler-Lagrange simulations of bi-disperse suspension flow
Finite element model of grains/fluid flows
Unified approach of hydrodynamic modeling and numerical simulation of dilute and dense granular flows for industrial applications
Modelling hotmix asphalt pollutant formation and collection using coupled CFD and DEM methods
3D CFD simulation of circulating fluidized bed boiler
|
|
|
21/7/2014
16:30 - 18:30 Higher Order (Generalized) Finite Element Methods for Problems with Singularities I Minisymposium organized by Christopher B. Davis, Hengguang Li and Victor Nistor |
MS038A Room: Tramuntana 2 Chair: Christopher Davis |
|
Convergence analysis of configurational forces for brittle cracks modeled through Ck-generalized FEM
On Global-Local Enrichments for Evolution Equations
Finite element error estimates on the boundary for elliptic boundary value problems with Neumann boundary data
A nonconforming Finite Element Method for an acoustic fluid-structure interaction problem
Collocated Enrichment for Isogeometric Analysis of Elliptic Boundary Value Problems with Singularities
Bridging singularities across scales
|
|
|
21/7/2014
16:30 - 18:30 Supercomputing in Biological and Medical Physics I Minisymposium organized by Shigeho Noda, Ryutaro Himeno, Shu Takagi, Hideo Yokota and Kazuyasu Sugiyama |
MS174A Room: Xaloc Chair: Kazuyasu Sugiyama |
|
Biochemical simulations connecting the tissue from the cell
Development and applications of the parallel computing middleware for the life science simulations
Development of integrated analysis of spinal cord and skeletal muscles for joint movement
Numerical analysis of pressure drop in steady stenotic flows by using Lorentz’s reciprocal theorem
Numerical simulation of high-intensity focused ultrasound treatment for breast cancer
Numerical simulation of the interaction between blood flow and arterial wall with the peripheral network
Multiscale simulations of the primary stage of thrombus formation
|
|
|
21/7/2014
16:30 - 18:30 Frontiers of Verification, Validation (V&V) and Uncertainty Quantification III Minisymposium organized by Luís Eça, François Hemez, James Kamm, Marisol Koslowski and William J. Rider |
MS210C Room: Salon Club Chair: Scott Doebling CoChair: Luís Eça |
|
Numerical uncertainty estimation in maritime CFD applications (Keynote Lecture)
Quantifying the effect of deformation mechanisms in nanocrystalline metals
Evaluation of the effect on solution of using modularized constitutive models in computational frameworks
A descriptor-based design methodology and materials informatics for developing heterogeneous microstructural materials system
On the influence of near-wall grid line spacing on the prediction of the friction resistance coefficient
Code verification of a partitioned FSI environment for wind engineering applications using the Method of Manufactured Solutions
|
|
|
21/7/2014
16:30 - 18:30 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon III Minisymposium organized by Christian Soize |
MS009C Room: Yasmin A Chair: Alvaro Coutinho CoChair: Christian Soize |
|
Space-time Computational FSI techniques (Keynote Lecture)
Wind-Turbine FSI 2.0: simulation of rotor yawing, turbine start-up, and stability in rough seas
Added mass and partitioned iterative solution methods for fluid-structure interaction
Isogeometric FSI simulations
Space–Time interface-tracking with topology change (ST-TC)
Assessment of complex wave-structure interaction using a stabilized edge-based finite element approach
Elasto-dynamic behavior of a 2D square lattice with entrained fluid
|
|
|
21/7/2014
16:30 - 18:30 Advanced Beam Models III Minisymposium organized by Dinar Camotim, Zuzana Dimitrovova and Rodrigo Gonçalves |
MS047C Room: Yasmin B Chair: Rodrigo Gonçalves CoChair: Zuzana Dimitrovová |
|
A rod model with flexible cross-sections for the folding and dynamic deployment of tape-springs
A critical review of the beam models used in the analysis of the wind turbine blades
Enhanced formula for a critical velocity of a uniformly moving load including shear contribution
Nonlinear bending of piezoelectric fiber-reinforced laminated composite beams
Spectral element method modeling of beams subjected to dynamic loads
Uncomplicated torsion and bending theories for micropolar elastic beams
|
|
|
21/7/2014
16:30 - 18:30 Structural and Multidisciplinary Optimization III Minisymposium organized by Jose Madeira and Helder Rodrigues |
MS026C Room: Yasmin C Chair: François-Xavier Irisarri CoChair: Jose Madeira |
|
Ramified optimal transportation and its multidisciplinary applications
Optimization and analysis for compression shape of waveriders with sharp/blunt leading edges
Surrogate based hybrid optimization applied to reservoir management
Mixed structural optimization of latticed steel transmission towers in a user-friendly interface
Estimation of the global optimality for multiple tuned mass damper systems using order statistics
Numerical modelling of geometrical effects in the performance of a cycloidal rotor
|
|
|
21/7/2014
16:30 - 18:30 STS 08: Higher-Order Methods for Aerospace Applications III |
STS08C Room: Auditorium Chair: Thomas Toulorge CoChair: Joaquim Peiro |
|
High-order mesh generation for CFD with aeronautical applications
Hybrid high order grid generation applied for 3D geometries
A chimera method with a Discontinuous Galerkin discretisation for the Navier-Stokes equations
A high-order unstructured mixed mesh method for rotor aerodynamic prediction
Applications of efficient parallel k-exact finite volume reconstruction on unstructured grids
Challenges for time and frequency domain aeroacoustic solvers
|
|
|
21/7/2014
16:30 - 18:30 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics III Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051C Room: Sala A Chair: Feng Xiao CoChair: Evgeny Timofeev |
|
Numerical perturbation schemes for convective-diffusion equation and their applications in NS equations
Implementation and validation of high-accuracy aeroacoustic schemes for the description of viscous gasflows
Analysis of the accuracy and stability of a higher-order cell-centered Finite Volume method for RANS on hybrid grids
Implicit LES of turbulent flows using a Discontinuous Galerkin method
Performance of projection methods for low-Reynolds-number flows
Improvements on the numerical analysis of viscoplastic-type non-Newtonian fluid flows
Spontaneous thermoacoustic oscillation in a closed cylindrical tube with various temperature gradient positions
|
|
|
21/7/2014
16:30 - 18:30 Multiscale Computational Mechanics of Materials III Minisymposium organized by Wing Kam Liu, Shaofan Li and Franck Vernerey |
MS260C Room: Sala B1 Chair: Shaofan Li |
|
A numerical investigation on the heterogeneous and anisotropic mechanical behaviour of AISI H11 steel using various stress-strain formulations: A multi-scale approach
Boundary effect on the elastic field and effective elasticity of a semi-infinite solid containing particles
Prediction of Material Behavior for LENS Manufactured Products
Phase transformation and fracture during lithiation in LiFePO4 electrodes
A comparison of approaches to model anisotropy evolution in pearlitic steel
Finite Element Analysis on hot deformation behavior of TiC-Particle-Reinforced Titanium Matrix Composite
Active soft matter model for simulations of cellular mechanotransduction and cell motility
|
|
|
21/7/2014
16:30 - 18:30 Particle Methods for Micro- and Nano-flows III Minisymposium organized by Marco Ellero and Dmitry A. Fedosov |
MS045C Room: Sala B2 Chair: Dmitry Fedosov |
|
Particle dynamics and structure of simple complex matter (Keynote Lecture)
Adaptive resolution simulation of atomistic protein in multiscale water
Brownian Dynamics without Green‘s Functions
Molecular dynamics pre-simulation methodology for nano-scale computational fluid dynamics
Simulation of conformational and hydrodynamic properties of dendrimer-like polymers under flow
Numerical model of droplet dynamics on the GDL surface of a PEM fuel cell cathode
|
|
|
21/7/2014
16:30 - 18:30 Modeling of Plasticity and Damage under Cyclic Loading I Minisymposium organized by Renato Natal, Abílio Jesus and Francisco Pires |
MS039A Room: Sala B3 Chair: Renato Natal CoChair: Abilio de Jesus |
|
Coupled plastic damage model for low and ultra-low cycle seismic fatigue
ULCF and cyclic elastoplastic behaviour of linepipe steel grades
Numerical modelling of steel pipelines subjected to severe monotonic and cyclic straining
Monotonic and ULCF behaviour of pipeline steels and components. models identification and applications
Characterisation and simulation of X60 elbow pipes in case of ULCF loading
Analysis of buried steel pipeline material damage under seismic loading conditions
|
|
|
21/7/2014
16:30 - 18:30 Methods for Cut and Composite Meshes: Theory, Algorithms and Applications I Minisymposium organized by Erik Burman, Mats G. Larson, Anders Logg, André Massing and Wolfgang Wall |
MS192A Room: Sala C1 Chair: Andre Massing |
|
Fracture growth in a poroelastic medium
A space-time cut finite element method for convection-diffusion problems on time dependent surfaces
Robust NXFEM method for a nonconforming approximation of an elliptic problem
A Nitsche-XFEM fictitious domain method for an immersed thin-walled structure in an incompressible fluid
Approximation of flows in fractured porous media by enriched mixed finite elements
A face-oriented stabilized XFEM approach for convection dominated flow problems using cut elements
|
|
|
21/7/2014
16:30 - 18:30 Growth and Remodeling of Living Tissues I Minisymposium organized by Rafael Grytz, Seungik Baek and Ellen Kuhl |
MS097A Room: Sala C2 Chair: Rafael Grytz CoChair: Seungik Baek |
|
Mechanobiological wrinkling instabilities in skin. An isogeometric analysis approach.
Elasticity and the shape of growing prevascular tumors
Growth and development of the human brain
Insights into regional adaptations in the growing pulmonary artery using a meso-scale structural model: Effects of ascending aorta impingement
Tomography-based in vivo quantification of bone turnover
|
|
|
21/7/2014
16:30 - 18:30 Modeling and Analysis of FGM Structures I Minisymposium organized by Justin Murin, Stephan Kugler and Mehdi Aminbaghai |
MS088A Room: Sala C3 Chair: Justin Murin CoChair: Stephan Kugler |
|
A new 3D FGM Beam finite element for modal analysis (Keynote Lecture)
Thermal conduction in FGM and MLC shell structures
Homogenization of material properties of the FGM beam and shell finite elements
Finite beam element with piezoelectric layers and functionally graded material of core
Creep buckling of viscoelastic functionally graded members under eccentric axial compression
|
|
|
21/7/2014
16:30 - 18:30 Mechanics of Nanostructured Materials III Minisymposium organized by I-Ling Chang, Takayuki Kitamura, Takahiro Shimada and Chuin-Shan D. Chen |
MS223C Room: Sala D1 Chair: JUNG-SAN CHEN |
|
Nanomechanical properties of polymorphic amyloid nanowire using molecular dynamics simulation
Shape design sensitivity analysis of nanoscale lattice structures
Reducing resonances of beams using antiresonance technique
Buckling behavior of single-walled carbon nanotubes subjected to combined loading in nanotube-polymer composites
Singular stress analysis near edge of a bump on substrate using molecular dynamics
|
|
|
21/7/2014
16:30 - 18:30 Advances in Computational Cardiovascular Modeling and Simulation III Minisymposium organized by Daniel E. Hurtado, Ellen Kuhl and Michael Ortiz |
MS160C Room: Sala D2 Chair: Daniel Hurtado |
|
Impact of robust image processing to reduce error in computational hemodynamics
Modeling of plaque progression in the coronary arteries
An automated left ventrical computational flow model: towards patient-specific analysis and diagnosis
Variational principles for cardiac electrophysiology
Simulation of short-term adaptation processes in the infarcted heart
|
|
|
21/7/2014
16:30 - 18:30 Advanced Numerical Methods for Cavitating Flows III Minisymposium organized by Nikolaus Adams, Steffen Schmidt and Eric Johnsen |
MS095C Room: Sala D3 Chair: Steffen J. Schmidt |
|
Eddy vorticity in cavitating tip vortices modelled by different turbulence models using the RANS approach
Numerical investigations of flows around turbopump inducer in cryogenic cavitating conditions
Numerical issues in higher-order accurate simulations of flows with vortex cavitation
Cavitation and evaporation in metals under the action of ultra-short intensive irradiation
An investigation of the performance of a positive displacement reciprocating pump at low pressure NPSH incorporating a three phase cavitation model
|
|
|
21/7/2014
16:30 - 18:30 Advanced Gridding and Discretization Techniques for Petroleum Reservoir Simulation III Minisymposium organized by Paulo R.M. Lyra, Darlan K.E. Carvalho, Michael G. Edwards, Clovis R. Maliska and Régis K. Romeu |
MS035C Room: Sala D4 Chair: Paulo Lyra CoChair: Michael Edwards |
|
Interface control volume finite element method.
Therm-mechanical coupling for salt domes formation
Simulation of the two phase flow in a wellbore using two-fluid model
Modeling of multiphase flows in finite-deformed porous media
|
|
|
21/7/2014
16:30 - 18:30 Computational Bone Biomechanics III Minisymposium organized by Zohar Yosibash and Ernst Rank |
MS028C Room: Sala D5 Chair: Taiji Adachi CoChair: Nir Trabelsi |
|
Bone remodeling based on cell culture
Homogenization of trabecular bone microstructure based on Finite Element Method and Micro Computed Tomography
Digital image correlation, nanoindentation and numerical simulations in the evaluation of bone tissues mechanical properties
Study on pathogenic mechanism of idiopathic scoliosis
A detailed infant finite element model for measureable cranial deformation
|
|
|
21/7/2014
16:30 - 18:30 Multiscale Computational Approaches for Geomechanics I Minisymposium organized by Thierry Massart, Bertrand François and Patrick Selvadurai |
MS180A Room: Sala D6 Chair: Thierry Massart |
|
A XFEM/Level set-based poroelastic framework for heterogeneous geomaterials
Dynamic damage law for rock blasting
Multiscale modeling of hydromechanical behavior and fracturing of shale gas
Discrete modeling of strain accumulation in granular soils under cyclic loading
A two-scale computational framework for hydro-mechanical couplings in quasi-brittle heterogeneous porous media including transient and damaging effects
A discrete-continuum multiscale method for geomechanics
|
|
|
21/7/2014
16:30 - 18:30 Model-Based Simulation of Structural Responses to Extreme Loading Conditions I Minisymposium organized by Xiong Zhang, Zhen Chen and Cheng Wang |
MS070A Room: Sala E1 Chair: Arunachalam Rajendran CoChair: Yufeng Xing |
|
A representative volume element based modeling of cementitious materials with various additives (Keynote Lecture)
An improved differential quadrature time element method
Thickness-shear vibration analysis of rectangular quartz plates by an improved numerical extended Kantorovich method
Analysis of high-velocity impact of honeycomb sandwich structure with material point method
Numerical simulation on impact response of plain-woven C/SiC composite
The simulation of the damage of concrete road caused by the buried pipe explosion
|
|
|
21/7/2014
16:30 - 18:30 Numerical Methods in Safety of Structures I Minisymposium organized by Jerzy Malachowski, Jose A. Rodriguez Martinez and Tomasz Lodygowski |
MS091A Room: Sala E2 Chair: Wojciech Sumelka CoChair: Jerzy Malachowski |
|
On the application of SPH in the numerical analyses of short-duration dynamic phenomena
Robustness of structures in natural fire
A rapid prediction of blast wave properties: Empirical vs. numerical approach
Foam/composite panels for protective aims – crashworthiness studies
Fire performance of a reinforced concrete column partially embedded in firewall.
From tests to real scale simulation: A systematic approach for impact limiter materials
A 16-node Hybrid-Trefftz perforated element featuring 8 nodes on the hole boundary
|
|
|
21/7/2014
16:30 - 18:30 Computational Mechanics of Wood Materials and Timber Structures I Minisymposium organized by Josef Eberhardsteiner, Michael Kaliske, Erik Serrano and Josef Füssl |
MS081A Room: Sala E3 Chair: Josef Eberhardsteiner CoChair: Jouni Freund |
|
Structural analysis of timber by means of FEM
Proposal for a failure surface for orthotropic composite materials
Numerical simulation tool for wooden boards with knots
Effective constitutive equation of plywood beam model
Analysis of wooden framed structures with semi-rigid connections
|
|
|
21/7/2014
16:30 - 18:30 CFD Methods in Combustion and Exhaust Aftertreatment of Internal Combustion Engines I Minisymposium organized by Thomas Lauer and Jose Garcia-Oliver |
MS063A Room: Sala E4 Chair: Thomas Lauer |
|
Application of a novel approach for calculating the premixed combustion in engines
Comparative study of subfilter scalar dissipation rate and mixture fraction variance models
Analysis of particle separation with respect to pre-ignitons in an SI-Engine
Implementation and validation of the mathematical model of surface tension into CFD wall film module
Transonic combustion: steady and unsteady potential models
Numerical investigation of a lean premixed burner fired with pure H2 and CH4
Simulation of an oxyfuel pilot-scale pulverized coal flame to quantify the effect of boudouard-reaction
|
|
|
21/7/2014
16:30 - 18:30 Practical Aspects of Advanced CFD Simulations on Emerging Multi- and Manycore Systems I Minisymposium organized by Dominik Göddeke and Matthias Möller |
MS119A Room: Sala E5 Chair: Matthias Möller |
|
Load balancing for multiphysics
Next-generation Trilinos for very large scale low Mach CFD simulations: A case study
Parallelizing the Fast Multipole Method using a task-based runtime for heterogeneous architectures
Optimizing the memory access performance of Fastest‘s Sipsol routine
On time stepping for meterological applications using the Discontinuous Galerkin method
Explicit method solver based on alternating direction isogeometric L2 projection
|
|
|
21/7/2014
16:30 - 18:30 Scale-dependent plasticity: Experiments, Theory and Numerical Modeling II Minisymposium organized by Thomas Böhlke, Stefan Sandfeld and Stephan Wulfinghoff |
MS201B Room: Sala E6 Chair: Thomas Böhlke |
|
Numerical implementation of continuum dislocation dynamics and comparison with discrete dislocation simulations
Using continuum dislocation dynamics in a continuous field description to modell dislocation based plasticity
The higher-dimensional Continuum Dislocation Dynamics based plasticity approach with application to a thin film tension test
Surface layer effect in polycrystalline aggregates
Analysis of the stochastics of interacting dislocation densities by discrete dislocation dynamics
|
|
|
21/7/2014
16:30 - 18:30 Computational Contact Mechanics III Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044C Room: Sala F Chair: Karl Schweizerhof |
|
A dual Lagrange Method with regularized frictional contact conditions: Modelling micro slip
Use of Uzawa algorithm for simulating frictional contact between crack faces in a body containing randomly oriented cracks
Model and mesh adaptivity for frictional contact problems
Smoothed nonlinear complementarity functions for elasto-plastic frictional contact at finite strains
An unbiased computational contact formulation for 3D friction
Friction contact of a smooth slider and viscoelastic half-space
On the nitsche and the shifted penalty method
|
|
|
21/7/2014
16:30 - 18:30 Computational Modeling of Fracture and Failure of Materials and Structures III Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226C Room: Sala H 1 Chair: Nicolas Moës |
|
Application of Thick Level-Set Method to study of dynamic fragmentation
Modeling fatigue failure using a variational multiscale method
Effect of viscosity on the robustness of the element deletion method for crack propagation modelling
Crack growth in incompressible, viscoelastic materials at large deformations
Simulation of edge-on impact experiments in SiC and B4C with “initially rigid” cohesive elements
Failure of RC slabs modelled using an embedded discontinuity approach
A constrained Large Time Increment method for a gradient-enhanced damage model
|
|
|
21/7/2014
16:30 - 18:30 Isogeometric Methods III Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049C Room: Sala H 2 Chair: Rene de Borst |
|
Recent developments of isogeometric collocation: Neumann boundary conditions, contact and plasticity formulations (Keynote Lecture)
Isogeometric collocation: incompressible elasticity, locking and possible solutions
A NURBS Based Collocation Approach for SB-FEM
Adaptive local refinement in isogeometric contact analyses using hierarchical B-splines
Three-dimensional isogeometric surface element enrichment
Matrix assembly procedures for isogeometric analysis with tensor product structure
Implementation of an isogeometric finite element toolbox in Diffpack
|
|
|
21/7/2014
16:30 - 18:30 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials III Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012C Room: Sala H 3 Chair: Caglar Oskay CoChair: Karam Sab |
|
Macroscopically consistent filtered elasticity tensor fields of heterogeneous media
Two-scale plate model with in-plane periodic microstructures
Multiscale modeling of periodic chiral cellular materials
On the Cosserat-Cauchy homogenization procedure for heterogeneous periodic media adopting micromechanical approaches
Characterization of RVE kinematics using digital image correlation at micro-scale
Comparative study for the efficient construction of statistically similar RVES: Lineal-path and minkowski functionals
Dislocation-based analysis of the plastic material behavior of heterogeneous structures
|
|
|
21/7/2014
16:30 - 18:30 Computational Biomechanics III Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007C Room: Sala J Chair: Michael Gee CoChair: T.Christian Gasser |
|
Modeling of large deformation of incompressible solids and implementation to transport of cells and particles in small blood vessels (Keynote Lecture)
Lateral migration of a spherical particle in channel flow
Aspects of arterial wall simulations: Nonlinear anisotropic material models and fluid structure interaction
End effect on fluid permeability of particulate layers
The numerical analyses of the food bolus velocity and pressure during swallowing using 3D swallowing simulator “Swallow Vision○R”
Post breast conserving surgery finite element simulations of wound healing: A preliminary study towards cosmesis
|
|
|
21/7/2014
16:30 - 18:30 Numerical Methods for Ocean Coastal and Internal Waves Modeling I Minisymposium organized by Fraunie Philippe, Bodnar Tomas and Espino Manuel |
MS244A Room: Business Centre I Chair: Philippe Fraunié |
|
A coupled finite element-boundary element (FEM-BEM) formulation for the Mild Slope Equation: An improvement for open and partial reflecting boundaries
Numerical modeling of stratified wake flows
On the modeling of an atmospheric free convection in an idealized v-shaped valley
Generation and propagation of solitary waves over varying topography
Fractal methods in coastal diffusion models
LES of wind and wave forced oceanic turbulent boundary layers using the residual-based variational multiscale method and near-wall modeling
Numerical simulation of stably stratified flow around an obstacle
|
|
|
21/7/2014
16:30 - 18:30 Aerodynamical Global Optimized Shapes of Flying Configurations, Compared and Inspired from Gliding Birds I Minisymposium organized by Adriana Nastase |
MS230A Room: Business Centre II Chair: Catalin Nae CoChair: Adriana Nastase |
|
Aerodynamic analysis and optimization of 2D airfoil shapes represented by NURBS formulation
Evaluation of Dynamic Characteristics of an Optimized Conceptual Active Smart Wing
Multi-point aerodynamic optimization of a flexible transport aircraft wing using an aeroelastic adjoint method
Winglets – Multiobjective optimization of aerodynamic shapes
Design and aerodynamic characteristics of solar UAV
Comparison of Global Optimized Shapes of Flying Configurations with those of Gliding Birds
|
|
|
21/7/2014
16:30 - 18:30 Multibody System Dynamics and Modal Reduction III Minisymposium organized by Pascal Ziegler and Johannes Gerstmayr |
MS239C Room: Sala de prensa I Chair: Ulrike Zwiers CoChair: Pascal Bestle |
|
Reduced order modelling of vibrations in wooden multi-storey buildings
Efficient modeling of continuum blades using ANCF curved shell element
Efficient fluid-structure interaction based on modally reduced multibody systems and smoothed particle hydrodynamics
Variational integrators for dynamical systems with rotational degrees of freedom
Solutions to the muscle redundancy problem: From an undeterminate to a deterministic problem
|
|
|
21/7/2014
16:30 - 18:30 Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others III Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia |
MS027C Room: Sala de prensa II Chair: Lorenzo Sanavia |
|
Constitutive model for expansive clays under chemical changes (Keynote Lecture)
Advances in modelling mechanics of flow and stress in unsaturated soil
On modeling three-component porous media incorporating hysteresis
Recent progress on a suction dependent cap model for soils
Mechanized tunneling operations: Modeling infiltration processes with consideration of an inverse damage formulation
|
|
|
21/7/2014
16:30 - 18:30 Thermomechanical Coupling in Fluids, Structures and Fluid-Structure-Interaction I Minisymposium organized by Philipp Birken, Wagner C. Fleming Petri, Detlef Kuhl and Andreas Meister |
MS156A Room: Sala de Reservas Chair: Philipp Birken CoChair: Detlef Kuhl |
|
Fast solvers for time dependent thermal fluid-structure interaction
A parametric-CFD study for heat transfer and fluid flow in a rotor-stator system
Thermal-Mechanical Coupled FSI-Analysis of Rocket Thrust Chambers with Multiple Load Cycles
Acceleration of strongly coupled fluid-structure interaction with manifold mapping
A monolithic approach applied to thermo-mechanically and electro-thermo-mechanically coupled problems
Higher order accurate discontinuous p-Galerkin methods for linear electro-thermal analysis
Thermodynamically consistent time integrators for thermo-elastic systems with heat conduction
|
|
|
19:00 - 20:00 Welcome Cocktail |
|
| POSTER SESSIONS | |
|
21/7/2014
16:00 - 18:30 Poster Session ECCM |
PSECCM Room: Hall Chair: to be confirmed |
|
Life prediction of large bearings using accelerated life test coupled with analysis
A couple stress theory for the analysis of plates with a RBF-FD meshless method
A FEM-DEM coupled and evolved formulation for analysis of multifracture in solids
B-Spline and reproducing polynomial particle shape functions for linear and nonlinear elasticity problems
A motion planning scheme for robotic in-hand object manipulation
A model of the tongue movement during swallowing
A new fem homogenization of periodic material based on an extended Rosette gage theory
A Numerical Approach to Evaluate the Seismic Performance of Water Supply Systems Based on Demand and Capacity in the Damaged Network
A numerical framework to model the mechanical behavior of bioresorbable polymeric braided wire stents
A relation between calculation error and modelling resolution of DEM
A water state study in the wood structure of four hardwoods below fiber saturation point by NMR technique
Adaptive surrogate-based multi-criteria optimization
An explicit algorithm for the nonlinear dynamics of spatial beam
Analysis of offshore structures for wind turbines and oil&gas using xsea software
Analysis of thick-walled pipeline elements operating in creep conditions
Analysis on a 2T2R type asymmetric parallel mechanism
Anisotropic growth of thin shells with subdivision elements
Application of fracture mechanics to assess the concrete damage due to cyclic freezing and thawing
Comparison of muscular movement following blood alcohol concentrations using low speed rear impact tests and dynamic simulation
Computational and experimental investigation of the all fracture mode specimens on mixed mode I/III and II/III fracture
Computational design of a pressure container manufactured by fiberglass sheets to industrial applications
Computational study of the effect of hydrostatic pressure on plastic deformation of metallic glass
Continuum-discontinuum particle method
CUFESAP: A CUDA based finite element code for elastic structural analysis on GPUs
Description model of cross-section of fibre bundle shape in prepreg composite
Design of smart structures with shape-reserved actuators
Determination of forming limit diagram using finite element method
Development of an automated framework for high intensity focused ultrasound simulations
Development of cosmetic orthodontic bracket and bracket cover
Effective thermal conductivity in anisotropic materials using boundary element methods
Emulating drilling degrees of freedom in the rotation-free Bézier-Enhanced Shell Triangle (BEST) finite element
Fatigue life analysis of an upgraded diesel engine crankshaft
FE modelling of frictional heating in a disc brake at temperature-dependent coefficient of friction
Finite element analysis of AZ31B magnesium alloy double butted tube forming process
Finite element analysis of the quasi-static thermal stresses in a pad-disc brake system
Finite element study of healthy, pathological and surgical lumbar spine biomechanics.
Finite element supporting thermoelectric effects in FGM materials
Formability of ZK60A magnesium alloy
GPU high performance explicit solution for kinematics and dynamics simulation of crank-connecting rod-piston mechanism
High order finite element method on the IBM power systems high performance computing applied on structural mechanics
Influece of material atomistic model on MD simulation
Influence of shape of particle size distribution on mechanics of uniaxially compressed granular packings
Mainshock – aftershock interaction diagram for a 3D plan-asymmetric structure
Mechanical behavior of carbon nanotubes encapsulating copper atoms
Mechanical properties of realistic materials: From quantum calculations to plastic flow
Micromechanism-based elasto-viscoplasticity constitutive modeling for engineering intermetallics
Modelling dynamic behaviour of orthotropic metals
Natural frequencies of a simply supported horizontal rectangular tank partially filled with a liquid
Nonlinear isogeometrical approach to stress recovery
Numerical and experimental study by BEM and thermal Images for predicting the effective thermal conductivity
Numerical simulation for temperature and stress distribution in laser forming process of AHSS
Numerical simulation of rock fragmentation process induced by indenter
Numerical simulation of the energy storage rate in metals under quasistatic loading
Numerical study of a thermo-acoustically encapsulation
Numerical study of actuatot performance of piezoelectric ink-jet print head
Quantitative estimation of exercise effect using numerical simulation and multi-sensory system on human leg
Reducing the number of runs in experimental research using smart designs of experiment
Scattering of semi-cylindrical gap and multiple shallow-buried cavities and inclusions by SH-wave
Seismic performance analysis of the hall-column system of a temple structure
Simulating soil-building interaction with a FEM/BEM approach
Simulation of implanted aortic stents
Soil-foundation-structure interaction by an explicit time integration method
Stiffener Layout Optimization of Thin-Walled Stiffened Plates
Stress concentration near sharp and rounded V-shaped notches in two-dimensional bodies
Application of the strong discontinuity method to ductile failure with damage
Structural design of metallic waveguide device in the microwave range using topological design process
Structural health monitoring of stay cables by the Scruton number
Studies of bimaterial interface fracture with peridynamics
Surgical treatment of shoulder injuries by the Weaver Dunn technique
The correlation between complicated lateral resisting system of the Shanghai tower
The effect of damage on the biomechanical behavior of the pelvic floor
The Poynting type effect and non-homogeneous radial deformation in the problem of torsion of hyperelastic circular cylinder
The relationship between the fast wave and the fabric tensor
Thermomechanical modelling of PCM in heat storage applications
Toward a polycrystal modeling of martensitic phase transformation based on the mechanism of Magee
Two level FETI method for transient problems
|
|
|
21/7/2014
16:00 - 18:30 Poster Session ECFD |
PSECFD Room: Hall Chair: to be confirmed |
|
A CFD solver on graphical processing unites for turbulence simulations
A comparison between Monte Carlo and polynomial chaos expansion techniques in reservoirs simulations
A high order compact scheme for hypersonic internal flow with turbulence models
A multi-level computational model to characterize the hepatic circulation in human cirrhosis
A Numerical investigation of scramjet engine air intakes for the 14-X hypersonic vehicle
A Shape Analysis of Ultrasonically Levitated Droplet with Moving Particle Semi-implicit and Distributed Point Source Method
Adaptive Galerkin Method with relevant basis functions for PDES with boundary conditions
Advances of continuous-discontinuous numerical method based on Lagrange equation
An Immersed Smoothed Finite Element Method for analyzing fluid-structure interaction systems consisting of dielectric elastomers
Application of EARSM turbulence model to simulation of reacting flow field in jets engines combustion chamber
Comparison of implicit LU-SGS schemes for hypersonic flows
Development of explicit unstructured mesh-based CFD solver for low-mach number flows using graphics processor units
Effect of Reynolds number on pressure losses in axisymmetric sudden expansions with chamfer
Evaluation of an immersed boundary method for solving the fluid structure interaction problem in refrigeration compressor valves
Flow recirculation in VHC designs
Investigation of Hydrodynamic Processes in Geothermal Plant
Mechanism of modulation of the chemical activity of metal nanoparticles through organic charge-transfer molecules
Mixing of two-phase flow in rotating microchannels with a circular chamber
Modelling of interaction between suspension and structure in a tumbling mill
Modified dynamic observers based on green functions method to solve a 3D transient IHCP
Multiphase flow modelling of explosive volcanic eruptions using an adaptive unstructured mesh-based approach
Multiscale modeling of solid-liquid interface ordering and its effect on the growth kinetics of metallic alloys
Non-conforming mimetic and virtual element discretization for polyhedral meshes
Numerical predictions of viscoelastic flows with an algebraic extra-stress model
Numerical Simulation of Incompressible Flow around Aerofoil Vibrating with Two Degrees of Freedom
Numerical study of the cooling air flow in a hydro generator with various ventilation schemes
Porous medium modeling for air flow through forest-comparison with wind tunnel data
Simulation of separation processes incorporating magnetic nanoparticle recovery in continuous microfluidic systems
Simulations of a single turbulent vortex ring using a regularized particle-mesh based vortex method
Sphere in Poiseuille: Static, free rotation and free fall
Submesoescale processes in upper ocean fronts: a numerical study using a Reynolds Stress Turbulence Model
The free-stream turbulence effect on the laminar-turbulent transition in the swept wing boundary layer
The initial-boundary Riemann problem for the solution of the compressible gas flow
System for reconsting images of internal defects by inverse problem solving
Prediction of pulsatile 3D flow in elastic tubes using star CCM+ Code
Ultrasonic image reconstruction of internal defects derived by EMAT using truncated singular value decomposition
Wake equilibrium parameters on a symmetric airfoil simulations
An XFEM based sharp interface approach for two-phase and free-surface flows
|
|
Tuesday, July 22nd |
|
|
22/7/2014
09:00 - 10:30 Plenary Lectures I |
PL1 Room: Auditorium Chair: Xavier Oliver CoChair: Anthony Jefferson |
|
Modelling and simulation of fracture and fragmentation
A review of residual distribution schemes for steady and unsteady compressible fluid dynamics
|
|
|
10:30 - 11:00 Coffee Break & Poster Sessions |
|
|
11:00 - 13:00 TECHNICAL SESSIONS |
|
|
22/7/2014
11:00 - 13:00 Meshless and Related Methods, a Minisymposium Dedicated to Celebrate the 80th Birthday of Professor Janusz Orkisz IV Minisymposium organized by Sergio Idelsohn, Pierre Villon, G.R. Liu, Paulo M. Pimenta and Suvranu De |
MS114D Room: Mare Nostrum A Chair: Paulo Pimenta CoChair: Sergio R. Idelsohn |
|
A new version of the PFEM for the free surface and multi-fluid problems
Numerical simulation of unsteady wind-induced conductor oscillations
Solving interface problems by the regularized method of fundamental solutions
Laminate element method for elastic guided wave diffraction simulation
Numerical simulation of a droplet impact onto a thin liquid film using SPH method
Numerical investigation on particle resuspension in turbulent duct flow via DNS-DEM: Effect of collisions
|
|
|
22/7/2014
11:00 - 13:00 HPC-Based CFD Simulations for Industrial Applications IV Minisymposium organized by Mariano Vázquez, Makoto Tsubokura , Takayuki Aoki and Mike Nicolai |
MS208D Room: Mare Nostrum B Chair: Makoto Tsubokura |
|
Challenges in efficient parallel simulations of spatially resolved packed-bed chromatography
Validation of local SGS models for high Reynolds number flow
Testing Eddy viscosity based and numerically based Les Turbulence Models in the HPC code alya
Adressing top supercomputers with anisotropic mesh adaptation and multigrid solvers
Multi-GPU uncertainty quantification for large-scale flow problems
Detail-preserving mesh simplification for scientific visualization
|
|
|
22/7/2014
11:00 - 13:00 Innovative Methods for Fluid-Structure Interaction IV Minisymposium organized by Harald van Brummelen, Trond Kvamsdal and Roger Ohayon |
MS077D Room: Mare Nostrum C Chair: Harald van Brummelen CoChair: Trond Kvamsdal |
|
FSI modeling and isogeometric techniques for ocean and marine engineering and science applications (Keynote Lecture)
An isogeometric fluid-structure interaction model for implosion
Immersed Isogeometric Analysis of Fluid-Structure Interation Problems
Incompressible Fluid Flow Computations based on NURBS-Enriched Finite Elements
Space-time finite element analysis of free-surface flows with regard to water wheels
Numerical modeling of piezoelectric energy harvesting devices driven by flow induced vibrations
|
|
|
22/7/2014
11:00 - 13:00 Computational Damage and Fracture Mechanics IV Minisymposium organized by Michael Brünig and Larissa Driemeier |
MS008D Room: Mare Nostrum D Chair: Michael Brünig |
|
3d numerical model of hydraulic fracture propagation
Polycrystal Viscoelastic Finite Element Analysis of Creep Defromation Behavior of a Welded Joint in Modified 9Cr-1Mo Steel
Damage detection in truss structures using wavelet transformation
Modeling of refractory brick furniture in ROTARY-KILN using finite element approach
A multiscale continuum modeling of cavitation damage and strain induced crystallization in rubber materials
Strong discontinuity method applied to soil/structure interaction in earthquake engineering
|
|
|
22/7/2014
11:00 - 13:00 Applications of Error Estimation and Model Adaptation in Computational Mechanics IV Minisymposium organized by Ludovic Chamoin, Pedro Díez, Fredrik Larsson and Kris Van der Zee |
MS010D Room: Mare Nostrum E Chair: Ludovic Chamoin |
|
Hierarchical model (HiMod) reduction for incompressible fluid dynamics in rigid and deformable pipes (Keynote Lecture)
Adaptive surrogate modelling in unsteady transport systems
On the verification of PGD reduced-order models
Effective uncertainty quantification using adjoint-based error estimates and surrogate models
Blockwise adaptivity for diffuse-interface tumor-growth model
Convergence properties of the hierarchical models in coupled electro-mechanical problems
|
|
|
22/7/2014
11:00 - 13:00 Advances in Computational Methods for Inverse Problems IV Minisymposium organized by Paul E. Barbone, Dan Givoli and Assad Oberai |
MS075D Room: Mare Nostrum F Chair: Dan Givoli |
|
Big data meets big models: Large-scale Bayesian inference, with application to inverse modeling of Antarctic ice sheet dynamics (Keynote Lecture)
On the parameter identification of visco-hyperelastic material models for adhesive tapes
Estimation of temperature distribution on inner surface from outer surface temperature using mathematical analysis-based inverse analysis
An error in constitutive equation approach for frequency-domain viscoelasticity imaging using interior data
Rational selection of experimental data for inverse structural problems
Nonlinear feedback control of tethered satellite systems by symplectic conservative approach
|
|
|
22/7/2014
11:00 - 13:00 New Trends in Numerical Methods for Multi-material Compressible Fluid Flows II Minisymposium organized by Raphael Loubère, Pierre-Henri Maire and Andrew Barlow |
MS179B Room: Llevant Chair: Pierre-Henri Maire CoChair: Tzanio Kolev |
|
Further developments of an interface-aware subscale dynamics closure model for multimaterial cells
Triangular metric-based mesh adaptation for compressible multi-material flows in semi-Lagrangian coordinates
Symmetry preservation and volume consistency in an R-Z staggered scheme
Modeling non-equilibrium two-phase flow in elastic-plastic porous solids
Isotropic properties of Lax-Wendroff methods, with application to Lagrangian hydrocodes
2D high-order remapping using mood paradigms
|
|
|
22/7/2014
11:00 - 13:00 Advances in Finite Element Methods for Tetrahedral Mesh Computations II Minisymposium organized by Guglielmo Scovazzi, Micheal Gee and Elie Hachem |
MS209B Room: Mestral Chair: Guglielmo Scovazzi |
|
Monotonic stabilized FE approximations of transport problems
Enhancements of numerical schemes for and with tetrahedral-based mesh adaptation
Residual-based variational multiscale turbulence models for unstructured tetrahedral meshes
Immersed volume method with anisotropic mesh adaptation and time-stepping control for fluid structure interaction and heat transfer applications
Main issues in anisotropic mesh adaptive FMG
|
|
|
22/7/2014
11:00 - 13:00 Industrial Applications of Computational Fluid Dynamics and Related Techniques IV |
CS658D Room: Ponent 1 Chair: Raquel Taboada-Vázquez |
|
An investigation of the performance of adaptive IIR filters for active noise control in one-dimensional systems
Rapidity and maneuverability optimization analysis of submersible vehicle based on particle swarm optimization
Directional fluid-structure interactions and automated database-assisted design for wind
The investigation of the rotationally oscillating plate’s flow field and its three-dimensional numerical simulation
An investigation of cooling characteristics in air-mist cooling by Eulerian-Lagrangian Method with V2F model
CFD study of a CO2 ejector performance installed in large cooling systems working at different ambient conditions
|
|
|
22/7/2014
11:00 - 13:00 Advanced Methods in Computational Fluid Dynamics IV |
CS655D Room: Ponent 2 Chair: Goran Stipcich CoChair: Jesús María Blanco |
|
A Vertex-Based High-Order Finite-Volume scheme for three-dimensional compressible flows on tetrahedral mesh
Flow decomposition analysis of the aeroacoustic wall pressure generated by automobile side mirror
Effect of upstream flow conditions on acoustic feedback-loop interactions in transitional airfoils
An always accurate and sometimes exact discretization of the convection-diffusion equation in 1D and 2D
Numerical simulation of one-dimensional flow in elastic and viscoelastic branching tube
Investigation of heat and mass transfer processes and phase transformation in motion of water droplets through high-temperature gas area
|
|
|
22/7/2014
11:00 - 13:00 Multiscale Methods and Applications in Computational Mechanics IV Minisymposium organized by Weiqing Ren and Yang Xiang |
MS116D Room: Terral Chair: Yang Xiang |
|
Extending the multiscale arlequin framework to coupling of models in dynamic regime
Multiscale method using static and transient subscales to solve transport flow problems
A multi-scale approach for estimation of real contact area and frictional behaviour of rubber sliding on rough surfaces
Local stress calculations: Importance of force decomposition
Lattice Boltzmann method as a fine scale solver in multiscale method modeling surface texture
Macro and micro residual stresses in Zirconium oxide layers
|
|
|
22/7/2014
11:00 - 13:00 Domain Decomposition Methods, High-Performance Technologies and Applications to Petroleum and Water Resources I Minisymposium organized by Ismael Herrera, Zhangxin (John) Chen , Graciela Herrera-Z and Martin Díaz |
MS085A Room: Tramuntana 1 Chair: Ismael Herrera |
|
Non-overlapping discretization methods
Algorithms that achieve the DDM-paradigm for symmetric systems of equations
Block strategies to speed up convergence in non-overlapping domain decomposition methods
DDM applied to subsurface flow and transport
A balancing preconditioner of iterative domain decomposition methods for magnetostatic problems
|
|
|
22/7/2014
11:00 - 13:00 Mechanobiology of Cellular Systems I Minisymposium organized by Marino Arroyo, Antonio DeSimone and Jose J. Muñoz |
MS255A Room: Tramuntana 2 Chair: Marino Arroyo |
|
Numerical and analytic computation of elastic interactions between membrane proteins
Insights into cytoplasmic rheology gained from modeling cellular blebbing
Towards patient-specific simulations and validation of a tumor angiogenesis model using isogeometric analysis
Electromechanical response of neuronal cells
Biological and artificial motility at microscopic scales
|
|
|
22/7/2014
11:00 - 13:00 Differential Reynolds Stress Modeling for Separating Flows in Industrial Aerodynamics I Minisymposium organized by Bernhard Eisfeld and Rolf Radespiel |
MS105A Room: Xaloc Chair: Bernhard Eisfeld |
|
Evaluation of a differential Reynolds stress model incorporating near-wall effects in a compressor cascade tip-leakage flow
Application of Reynolds stress models to separated aerodynamic flows
Separated flow predicition around a 6:1 prolate spheroid using Reynolds stress models
Influence of pressure-strain closure on the prediction of separated flows
Modeling of Reynolds-stress augmentation in shear layers with strongly curved velocity profiles
Dynamic wall modelling for large-eddy simulations. Application to high Reynolds number aerodynamics of complex geometries
|
|
|
22/7/2014
11:00 - 13:00 Advanced Reduced-order Modeling Strategies for Parametrized PDEs and Applications I Minisymposium organized by Gianluigi Rozza and Andrea Manzoni |
MS069A Room: Salon Club Chair: Gianluigi Rozza CoChair: Benjamin Stamm |
|
Reduced basis approaches for the big data framework
ECSW: An energy-conserving sampling and weighting method for the hyper reduction of discrete nonlinear finite element models
Closure modeling for the proper orthogonal decomposition of turbulent flows: Models and analysis
Energy-stable Galerkin reduced order models for nonlinear compressible flow
Data-driven reduced-order modeling to support online decision-making for a self-aware aircraft
Data-driven model order reduction for state and model-bias estimation
|
|
|
22/7/2014
11:00 - 13:00 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon IV Minisymposium organized by Christian Soize |
MS009D Room: Yasmin A Chair: Roger Ghanem CoChair: Christian Soize |
|
An adaptive interpolatory model reduction method for vibroacoustic problems (Keynote Lecture)
Simulation of vibro-acoustic response by fast BEM and FEM coupling
Vibroacoustic modeling of structures with attached noise control materials using wave-based methods
Computational strategies for acoustic transmission studies
Structural acoustics with interface damping: Various considerations about static terms for efficient dynamic behavior description
|
|
|
22/7/2014
11:00 - 13:00 Multiscale and Multiphysics Modelling for Complex Materials (MMCM5) I Minisymposium organized by Patrizia Trovalusci, Tomasz Sadowski, René de Borst and Bernhard Schrefler |
MS120A Room: Yasmin B Chair: Bernhard Schrefler CoChair: Patrizia Trovalusci |
|
Influence of stiffness variation in timber boards on effective behavior of GLT beams
A biphase model for concrete subject to sulfate attack
A computational study of flexoelectricity in nanostructures
Temperature influence on smart structures: A first approach
|
|
|
22/7/2014
11:00 - 13:00 Phase-field Modeling and Simulation in Fluid Mechanics, Solid Mechanics and Life-sciences I Minisymposium organized by Hector Gomez, Kris van der Zee, Marino Arroyo, Irene Arias, Baskar Ganapathysubramanian, Thomas J.R. Hughes and John T. Oden |
MS143A Room: Yasmin C Chair: Irene Arias CoChair: Marino Arroyo |
|
Phase field modeling of brittle and ductile fracture in multi-physics environments (Keynote Lecture)
Three-dimensional phase-field simulation of crack propagation in ferroelectric polycrystals
A massively parallel program to solve the phase field formulation for crack propagation
Fracture based arc-length control for phase field modeling of the hydraulic fracturing
Phase-field modelling of stress evolution in heterogen structures
A Self-consistent atomistic-phase field model for the study of ge nanocrystallization
|
|
|
22/7/2014
11:00 - 13:00 STS 01: Multi-Physics Green Challenges in Aeronautics: The EC Grain2 EU-China Networking Project |
STS01A Room: Auditorium Chair: Jacques Periaux |
|
High-performance issues for aeronautics design
Airframe flight physics key green technologies (KGT2) synthesis and proposal for future work
Modelling and simulation of airframe flow and noise genration
Combustion Simulation with Particular Reference to Green Aviation
Experimental modeling of low pressure turbine blades at low Reynolds and high mach numbers
|
|
|
22/7/2014
11:00 - 13:00 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics IV Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051D Room: Sala A Chair: Ioannis Nikolos CoChair: Yiqing Shen |
|
Natural convection and low mach number flows simulation using a compressible high-order finite volume scheme
A higher-order finite volume method based on Moving Least Squares for the resolution of the incompressible Navier Stokes on unstructured grids
Accurate and robust multi-moment finite volume solver on unstructured grids for incompressible flows
Highly accurate dispersion relation preserving schemes for incompressible flows
|
|
|
22/7/2014
11:00 - 13:00 Computational Models for Soft Tissues I Minisymposium organized by Estefania Peña, Renato N. Jorge, Miguel A Martinez and Pedro S. Martins |
MS067A Room: Sala B1 Chair: Renato Natal |
|
Identification of anisotropic directions in soft tissue and their simulation with p-version finite elements
A rate dependent microstructural constitutive model of inelastic effects in soft fibred tissues
On simulating skeletal muscle fatigue. A 3D electro-mechanical continuum model
Annulus fibrosus model identification enriched by transverse strain measurements
Biomechanical simulation of ligament damage: Its clinical relevance
Disjoint domains interactions framework for hyperelastic simulations
|
|
|
22/7/2014
11:00 - 13:00 Fluid-Structure Interaction Algorithms and Applications I Minisymposium organized by Jonathan Pitt and Scott Miller |
MS062A Room: Sala B2 Chair: Cooper Elsworth |
|
Electro-hydrodynamic effect on DNA dynamics during DNA transport
A simulation tool for parachute/payload systems
Fluid structure interaction with inconsistent software platforms
Fluid-structure interaction analysis of wind turbine blade profiles
Modelling of waves and wave-structure interactions using non-linear numerical models
Numerical investigation of freely falling objects using direct-forcing immersed boundary method
|
|
|
22/7/2014
11:00 - 13:00 Modeling of Plasticity and Damage under Cyclic Loading II Minisymposium organized by Renato Natal, Abílio Jesus and Francisco Pires |
MS039B Room: Sala B3 Chair: Abilio de Jesus CoChair: Jorge Belinha |
|
Numerical implementation of a simple model for directional distortional hardening in metal plasticity
Cyclic material behaviour of welded ultra high-strength steels
Harmonic model for nonlinear thermo-mechanical analysis of hot mill rolls
Inelastic Analysis of Modified 9Cr-1Mo Steel in High Temperature
The influence of direction-modulated loading conditions on the lifetime of filled elastomers
Material modelling for metals considering dynamic plasticity
|
|
|
22/7/2014
11:00 - 13:00 Methods for Cut and Composite Meshes: Theory, Algorithms and Applications II Minisymposium organized by Erik Burman, Mats G. Larson, Anders Logg, André Massing and Wolfgang Wall |
MS192B Room: Sala C1 Chair: Andre Massing |
|
Image-based simulations using the unfitted DG method
XFEM and stabilization for 3D incompressible two-phase flows
Unfitted Nitsche Finite Element Methods for multi-physics problems
Higher degree Immersed Finite Element methods for interface problems
Nearly body-fitted meshes for transient flows with embedded geometries
|
|
|
22/7/2014
11:00 - 13:00 Growth and Remodeling of Living Tissues II Minisymposium organized by Rafael Grytz, Seungik Baek and Ellen Kuhl |
MS097B Room: Sala C2 Chair: Rafael Grytz |
|
Effect of scleral anchorage on the perfusion of the lamina cribrosa
A Tissue Engineering Strategy for Soft Tissue Growth
Changing hyperelastic properties of the tree shrew sclera during visually-guided remodeling
Growth prediction of abdominal aortic aneurysms and its association of intraluminal thrombus
An integrated remodeling to fracture model of bone
|
|
|
22/7/2014
11:00 - 13:00 Modeling and Analysis of FGM Structures II Minisymposium organized by Justin Murin, Stephan Kugler and Mehdi Aminbaghai |
MS088B Room: Sala C3 Chair: Stephan Kugler CoChair: Justin Murin |
|
Thermoelasticity in FGM shell structures (Keynote Lecture)
Thermal post-buckling response of sandwich functionally graded materials (FGM) plates resting on the Pasternak foundation
Transient thermoelastic analysis of a functionally graded hollow sphere with piecewise power law
Residual stress in RF magnetron sputtered ZnO thin films on GaP substrates and nanowires
On the finite element implementation of the elastic gradient inherent to FGMs
|
|
|
22/7/2014
11:00 - 13:00 Fast Direct Solvers: Applications to Boundary Element Methods and Other Linear Systems I Minisymposium organized by Stéphanie Chaillat-loseille, Eric Darve and Martin Schanz |
MS200A Room: Sala D1 Chair: Eric Darve |
|
A new analytic preconditioner for the iterative solution of Dirichlet exterior scattering problems in 3D elasticity
Fast multipole preconditioners for sparse linear solvers
Fast multipole boundary element method for multizone problems
A simple multi-domain BEM with the fast multipole method
A data efficient, CQM-based BEM approach for elastodynamics
|
|
|
22/7/2014
11:00 - 13:00 Advances in Computational Structural Dynamics I Minisymposium organized by Evangelos J. Sapountzakis and Andreas E. Kampitsis |
MS018A Room: Sala D2 Chair: Roman Lewandowski |
|
Determination of dynamic characteristics and their design sensitivities for structures with viscoelastic dampers (Keynote Lecture)
Development of efficient models for the study of complex rotating machines and of the rotors-foundations interaction
Simulation of the dynamic interaction between pantograph and overhead line using a coupled FEM - Multibody procedure
Development of a transient structural analysis algorithm by using FETI-local method
Seismic Evaluation of Braced Steel Structures with and without Viscous Dampers for near Fault Ground motions
Non-linear dynamic soil structure interaction using Bouc - Wen type hysteretic models
|
|
|
22/7/2014
11:00 - 13:00 Advances in Computational Models for Vertebrate Structures in Biology and Palaeontology I Minisymposium organized by Jordi Marcé-Nogué, Josep Fortuny and LLuís Gil |
MS078A Room: Sala D3 Chair: Jordi Marcé-Nogué CoChair: Josep Fortuny |
|
Computational mechanics sheds new light on the paleobiology of early tetrapods
The seahorse tail as inspiration for serially articulated systems
New method to validate FEA on palaeobiological modeling
Quantitative interpretation of tracks for determination of body mass using finite element analysis
Advances in methodologies and metrics for comparison of biological computational models
Flexible multibody approach in application to the feeding mechanism in vertebrate structures
|
|
|
22/7/2014
11:00 - 13:00 Advances with Adjoint CFD Solvers for Unsteady Flow I Minisymposium organized by Jens-Dominik Mueller, Carsten Othmer, Jacek Rokicki, Kyriakos Giannakoglou, Uwe Naumann, Marcus Meyer, Eugene de Villiers, Mustafa Megahed and Laurent Hascoet |
MS214A Room: Sala D4 Chair: Marcus Meyer |
|
Stabilisation of discrete adjoint solvers through improved primal timestepping (Keynote Lecture)
A Discrete Adjoint version of an Unsteady Incompressible solver for OpenFOAM using Algorithmic Differentiation
Toward a discrete adjoint model of ACE+
Adjoints of fixed-point iterations
Towards unsteady adjoint analysis for turbomachinery applications
|
|
|
22/7/2014
11:00 - 13:00 Numerical Predictions of Detached Flows I Minisymposium organized by Esteban Ferrer, Eusebio Valero and Vincent Couaillier |
MS126A Room: Sala D5 Chair: Esteban Ferrer |
|
Assessment of turbulence closures for detached flows control
Vortex shedding and its suppression for a shear flow past a circular cylinder
A residual-based variational multiscale Discontinuous Galerkin method for turbulent flows
Numerical simulation of high-speed impulsive noise of the PZL W-3A “Sokol” (Falcon) helicopter main rotor in forward flight
Implicit Large Eddy Simulation of high-speed impinging jets
3D p-adaption for compressible flow
|
|
|
22/7/2014
11:00 - 13:00 Innovative Fictitious Domain Approaches for High-order Methods and IGA I Minisymposium organized by Alexander Düster, Ernst Rank and Dominik Schillinger |
MS117A Room: Sala D6 Chair: Ernst Rank |
|
The spectral cell method for wave propagation analysis of heterogeneous materials (Keynote Lecture)
Dynamic analysis of high loaded components, discretized by fictitious domain methods
The spectral cell method for smart structure applications
The finite cell method applied to nonlocal damage mechanics
A contact formulation based on high order fictitious domain methods
Efficient exact integration of NURBS and T-splines within a 3D-Cartesian grid framework
|
|
|
22/7/2014
11:00 - 13:00 Model-Based Simulation of Structural Responses to Extreme Loading Conditions II Minisymposium organized by Xiong Zhang, Zhen Chen and Cheng Wang |
MS070B Room: Sala E1 Chair: Xiong Zhang CoChair: Shaker Meguid |
|
Energy absorption in axial crushing of foam filled thin walled conical frusta (Keynote Lecture)
A coupled finite difference material point method for high explosive explosion problems
High order discontinuous Galerkin positivity-preserving numerical simulation of condensed explosives detonation
Numerical modeling and analysis of STF-based liquid armor materials under ballistic impact
Pseudo arc-Length method with moving mesh for shock wave propagation
|
|
|
22/7/2014
11:00 - 13:00 Recent Developments in Fluid–structure Interactions of Physiological Systems I Minisymposium organized by Jeff D. Eldredge and Rajat Mittal |
MS229A Room: Sala E2 Chair: Jeff Eldredge |
|
Fluid dynamics and blood damage in artificial heart valves: Biological vs. mechanical aortic prostheses
Image-guided fluid-structure interaction simulations of heart valve prosthesis
Multiscale modeling and optimal treatment planning in pediatric cardiology
Computational modeling of the effect of mitral-valve leaflet dynamics on intraventricular flow
Mitral valve modelling for left ventricle flow
|
|
|
22/7/2014
11:00 - 13:00 Computational Mechanics of Wood Materials and Timber Structures II Minisymposium organized by Josef Eberhardsteiner, Michael Kaliske, Erik Serrano and Josef Füssl |
MS081B Room: Sala E3 Chair: Michael Kaliske CoChair: Sigurdur Ormarsson |
|
A probabilistic model to account for stiffness variation in glued laminated timber
Continuum modelling and simulations of pressboard with temperature/moisture effects
Implementation of fully coupled heat and mass transport model to determine temperature and moisture state at elevated temperatures
Extended beam model for simulation of hygro-mechanical and visco-elastic deformations in inhomogeneous timber structures
|
|
|
22/7/2014
11:00 - 13:00 Advances in Numerical Methods for Flexible Multibody Mechanics I Minisymposium organized by Olivier Bauchau, Olivier Bruls and Alberto Cardona |
MS235A Room: Sala E4 Chair: Olivier Bruls CoChair: Juan Carlos García Orden |
|
A simple torsion-free nonlinear beam element for multibody dynamics (Keynote Lecture)
Formulation of a non-linear shell finite element on the lie group SE (3)
Nonlinear analysis of tape springs: Comparison of two geometrically exact finite element formulations
On a consistent application of Newton‘s law to mechanical systems with motion constraints
|
|
|
22/7/2014
11:00 - 13:00 Practical Aspects of Advanced CFD Simulations on Emerging Multi- and Manycore Systems II Minisymposium organized by Dominik Göddeke and Matthias Möller |
MS119B Room: Sala E5 Chair: Matthias Möller |
|
Flux vector splitting methods for the Euler equations on 3D unstructured meshes for CPU/GPU clusters
Edge-based solvers for the compressible Euler equations on multicores and GPUs
Direct numerical simulation of turbulent flows with parallel algorithms for various computing architectures
Direct numerical simulation of the turbulent mixing in Richtmyer Meshkov instability
Cut-cell method: Application to water waves generated by a submerged obstacle
A parallel second-order cut-cell method: Validation and simulation at moderate Reynolds numbers
|
|
|
22/7/2014
11:00 - 13:00 Biomechanics and Applied Dynamics I Minisymposium organized by Josep M. Font-Llagunes and József Kövecses |
MS134A Room: Sala E6 Chair: Josep M. Font-Llagunes CoChair: Daniel Garcia Vallejo |
|
Optimization of the flight style in ski jumping
A multi-scale study of the hip joint mechanics using rigid-body inverse dynamics and finite element analysis
A spatial dynamic model to investigate hip squeaking and contact point path in hip implants
Designing optimal controls by parameter optimization for a stance-control knee-ankle-foot orthosis
The influence of muscle modeling methods and paths on head and neck response
Modelling of car occupant muscle responses in a finite element human body model
|
|
|
22/7/2014
11:00 - 13:00 Computational Contact Mechanics IV Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044D Room: Sala F Chair: Peter Wriggers |
|
A conjugate gradient based method for frictional contact problems
A modified perturbed Lagrangian formulation for contact problems
An accurate and robust contact resolution algorithm for finite-discrete element modelling
A new direct elimination algorithm for quasi-static and dynamic contact problems
Interior point method based contact algorithm for structural analysis of electronic device models
Surface-to-surface penalty contact for quadratic elements
|
|
|
22/7/2014
11:00 - 13:00 Computational Modeling of Fracture and Failure of Materials and Structures IV Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226D Room: Sala H 1 Chair: Olivier Allix |
|
Modelling of ductile fracture initiation in sheet metal structures with spatially varying microstructure and properties
On the subscale enrichment of crack tip element in XFEM and the phantom node method
Tikhonov regularization for the modified mapping-collocation method applied to circumferential crack in a curved beam
Crack propagation in a Gurson ductile material using X-FEM
Numerical assessment of thick level set models for quasi-brittle materials
A smoothed damage-contact formulation with improved convergence characteristics and numerical robustness
|
|
|
22/7/2014
11:00 - 13:00 Isogeometric Methods IV Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049D Room: Sala H 2 Chair: Trond Kvamsdal |
|
Adaptive isogeometric failure analysis of trabecular bone structures (Keynote Lecture)
Isogeometric Analysis for the evaluation of Carotid Artery Stent performance
An isogeometric model for rupture dynamics
Cohesive zone modelling using T-splines
Isogeometric Design Sensitivity Analysis of Curved Crack Problems
Isogeometric finite element analysis of single-phase Darcy flow in porous media
|
|
|
22/7/2014
11:00 - 13:00 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials IV Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012D Room: Sala H 3 Chair: Gottfried Laschet CoChair: Luigi Gambarotta |
|
Potential based model order reduction: Theory and GPU implementation
Wang cubes in numerical homogenization methods
A dispersive computational homogenization scheme for modeling quasi-brittle materials under impact loading
A multi-level approach for micro-cracked viscoelastic masonry
Numerical multiscale solution strategy for fracturing heterogeneous materials
On the representative volume element size for quasi-isotropic macroscopic behaviour of a Fe-Mn-C steel microstructure simulated by the phase-filed method
|
|
|
22/7/2014
11:00 - 13:00 Computational Biomechanics IV Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007D Room: Sala J Chair: Ellen Kuhl CoChair: Alexander Zoellner |
|
Modelling strong fibre alignment in the collagen network of biomembranes
A physically motivated constitutive model for cell-mediated compaction and collagen remodeling in engineered tissues
Isogeometric Kirchhoff-Love shell formulation for biological membranes
A novel fluid-solid-growth framework of abdominal aortic aneurysm evolution
Evaluation of aortic residual stresses: Experimental evidence and constitutive modeling
A 3D histomechanical growth and remodeling framework for arteries with application to Abdominal Aortic Aneurysms
|
|
|
22/7/2014
11:00 - 13:00 Damage and Fracture in Thin Structures I Minisymposium organized by Timon Rabczuk and Pedro Areias |
MS076A Room: Business Centre I Chair: Timon Rabczuk |
|
Development and validation of dye-sensitized solar cell finite element model for sealing failure investigation
Finite strain fracture with injected anisotropic softening elements
Phase-field modeling of fracture in thin shells with maximum entropy approximants
Analysis on the plastic dynamic response on the reinforced concrete rectangular plate under explosive loading
|
|
|
22/7/2014
11:00 - 13:00 Computational Techniques and Simulation of Damage/Failure in Composite Materials I Minisymposium organized by Jose L. Curiel Sosa, Pedro M. Baiz and Ettore Baribieri |
MS061A Room: Business Centre II Chair: Jose Luis Curiel Sosa |
|
Damage and failure in composites
Quasi brittle matrix composite materials: A computational approach based on discontinuous-like FE and fracture mechanics debonding simulation
Experimental validation for a numerical model of transverse damage in composite materials
Design and Analysis of 3D Woven Composites at Failure
Computational modeling of microscopic fracture process in compressive failure of quasi-isotropic laminate of composite materials
Fatigue delamination monitoring in composite structures by guided wave method
|
|
|
22/7/2014
11:00 - 13:00 Multibody System Dynamics and Modal Reduction IV Minisymposium organized by Pascal Ziegler and Johannes Gerstmayr |
MS239D Room: Sala de prensa I Chair: Ulrike Zwiers CoChair: Pascal Bestle |
|
An enhanced inverse kinematic and dynamic model of a 6-SBU Stewart Platform
Dynamics of an elastic web in roll-to-roll systems using Finite Element Method
Modeling and validation of an elastoplastic terrain model for simulation of forestry machines
Experimental and numerical analysis of the musical behavior of triangle instruments
Dynamics aspect of chatter suppression in milling
|
|
|
22/7/2014
11:00 - 13:00 Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others IV Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia |
MS027D Room: Sala de prensa II Chair: Antonio Gens |
|
A micromechanical model for cement paste with effects of carbonation
A multilevel model for ion and moisture transport in intact, micro-cracked and fracturing porous materials: Application to ASR in concrete
Material viscoelasticity as result of microscale interactions between liquid crystalline interfaces and solid elastic matrix
Particle-based modelling and computational homogenisation of granular media
Numerical multiscale modelling of hydrophobized sand using minimal kinematic boundary conditions procedure of homogenisation
|
|
|
22/7/2014
11:00 - 13:00 Domain Coupling and Domain Boundary Constraints I Minisymposium organized by Martin Ruess, Stefan Kollmannsberger and Alessandro Reali |
MS185A Room: Sala de Reservas Chair: Stefan Kollmannsberger |
|
Enforcing domain coupling & boundary constraints in isogeometric methods
Coupling of laminated composite structures in the framework of isogeometric analysis
The weak substitution method - a new approach for the connection of NURBS surface patches in isogeometric analysis
Weak coupling of trimmed patches in isogeometric analysis and the Finite Cell Method
Task-based decomposition of a higher-order method on complex geometries
Local/global non-intrusive parallel coupling for large scale mechanical analysis
|
|
|
13:00 - 14:00 Lunch Time |
|
|
22/7/2014
14:00 - 14:45 Industrial Lecture |
IL Room: Auditorium Chair: Jacques Periaux |
|
Numerical Simulation on Aircraft – Design and Understand Aircraft Aerodynamics and Flight Physics
|
|
|
22/7/2014
14:00 - 16:00 Semi-Plenary Lectures I |
SPL1 Room: Mare Nostrum A+B+C Chair: Carlos Felippa |
|
Variational methods for consistent singular and scaled mass matrices
Selective mass scaling for solid-shell elements in explicit dynamics analyses
Mechanics of confined solid and fluid thin films: Graphene and lipid bilayers
|
|
|
22/7/2014
14:00 - 16:00 Semi-Plenary Lectures II |
SPL2 Room: Mare Nostrum D+E+F Chair: Herbert Mang CoChair: Manolis Papadrakakis |
|
Towards adaptive multiscale techniques for kinetic theories
Multiscale analysis applied to material modeling
Practical multiscaling
|
|
|
22/7/2014
14:00 - 16:00 Semi-Plenary Lectures III |
SPL3 Room: Sala H 1 + H 2 Chair: Robert Taylor CoChair: Manuel Casteleiro |
|
Particle Methods: The most efficient way to solve fluid mechanics problems
Multi-disciplinary robust optimization of sports dynamics system
Intelligent computing in multiscale materials design
|
|
|
22/7/2014
14:00 - 16:00 Semi-Plenary Lectures IV |
SPL4 Room: Sala H 3 + J Chair: Tod Laursen CoChair: Jacques Periaux |
|
Reduced Order Models with (and for) goal-oriented error assessment
The hybridizable Discontinuous Galerkin Methods
Discontinuous Petrov-Galerkin method with optimal test functions. Progress report
|
|
|
16:00 - 16:30 Coffee Break & Poster Sessions |
|
|
16:30 - 18:30 TECHNICAL SESSIONS |
|
|
22/7/2014
16:30 - 18:30 Advances in Numerical Methods for Linear and Non-linear Dynamics I Minisymposium organized by Alexander Idesman and Gregory Hulbert |
MS087A Room: Mare Nostrum A Chair: Gregory Hulbert CoChair: Alexander Idesman |
|
Accurate modelling of wave propagation problems in homogeneous, composite and functionally graded materials (Keynote Lecture)
A weakly-intrusive coupling scheme in space and time for localized effects in explicit dynamics
A new high-order spatial Galerkin discretization based on Fourier Continuation methods
High-order hybrid methods for elastic waves
Applications of smoothness-increasing accuracy-conserving (SIAC) filtering for the Discontinuous Galerkin approximation to nonlinear hyperbolic equations
|
|
|
22/7/2014
16:30 - 18:30 Advances in Shape and Topology Optimization of Structures and Materials I Minisymposium organized by Michael Wang, Zhen Luo and Takayuki Yamada |
MS494A Room: Mare Nostrum B Chair: Zhen Luo |
|
Designing materials for negative or zero compressibility through topology optimization (Keynote Lecture)
Design of mechanical metamaterials using a level-set based topology optimization method
Computational optimisation by local tailoring of continuous fibre reinforced thermoplastic composite sheets
Generation of polycrystalline microstructures using 3D-Voronoi tessellation and genetic algorithms
Shape optimization of nanoparticles for optical metamaterials
The topological design of thermoelastic material using a level set method
|
|
|
22/7/2014
16:30 - 18:30 Innovative Methods for Fluid-Structure Interaction V Minisymposium organized by Harald van Brummelen, Trond Kvamsdal and Roger Ohayon |
MS077E Room: Mare Nostrum C Chair: Trond Kvamsdal CoChair: Harald van Brummelen |
|
Numerical analysis of gas transport in micro-porous material by DSMC method (Keynote Lecture)
2D and 3D thermal dendritic solidification modeling using the phase-field method and automatic adaptive meshing
Advanced finite element method for free surface flow with application to self-induced silo discharge
Numerical simulation on multiphase microstructures obtained from 3D imaging
On the development of a harmonic balance method for aeroelastic analysis
Vortex element method scheme for numerical simulation in FSI-problem for clamped-clamped cylindrical shell
|
|
|
22/7/2014
16:30 - 18:30 Computational Fluid Dynamics for Free and Moving Boundaries I Minisymposium organized by Rekha R. Rao, David R. Noble, Scott A. Roberts and Elie Hachem |
MS256A Room: Mare Nostrum D Chair: Rekha Rao CoChair: David Noble |
|
On the application of enriched two-fluid flow solver for the simulation of casting problems (Keynote Lecture)
The NURBS-Enhanced finite element method (NEFEM) for free-surface flow simulations
Time integration methods for the enriched conformal decomposition Finite Element Method
Extended Velocity-Pressure enrichments for solving moving interface two-phase flows
3D incompressible two-phase flow benchmark computations for rising droplets
A surface tension method for VOF using a marching-cube isosurface construction algorithm
Some modifications of MPS method for incompressible free surface flows
|
|
|
22/7/2014
16:30 - 18:30 Uncertainty Modeling and High Performance Stochastic Methods for Computationally Intensive Calibrations, Predictions and Optimizations I Minisymposium organized by Tan Bui-Thanh, Thomas Carraro, Marko Laine and Ernesto E. Prudencio |
MS184A Room: Mare Nostrum E Chair: Ernesto Prudencio |
|
Assessing the numerical efficiency of Monte Carlo and Spectral Stochastic FEM in structural problems
Uncertainty quantification and predictive science for high-energy density radiative transfer using neutron experiments
An Adaptive Sampling Scheme for Radiation Shielding Calculation
An optimization of turbulent flows by using data assimilation
An adaptive polynomial chaos expansion for accelerating the solution of Spectral Stochastic FEM problems
Optimal experimental design for uncertainty reduction
Statistical reconstruction of multiphase random media
|
|
|
22/7/2014
16:30 - 18:30 Current Challenges in Cohesive-zone Models I Minisymposium organized by Albert Turon, Giulio Alfano and Bent F. Sørensen |
MS196A Room: Mare Nostrum F Chair: Bent F. Sørensen |
|
A rate-dependent cohesive-zone model simulating stick-slip crack propagation
An efficient approach to study multi-layered structures with cohesive interfaces
Derivation of cohesive-zone models accounting for friction and dilatancy
Cohesive Zone Models for Mixed Mode Fracture
Analytical development and numerical simulation of cohesive crack initiation and propagation coupled with plasticity
Mixed implicit and explict formulation and domain decomposition method of contact dynamics
|
|
|
22/7/2014
16:30 - 18:30 Recent Developments in Optimal Design of Composite Materials and Structures I Minisymposium organized by Erik Lund, José Pedro Blasques and Mathias Stolpe |
MS157A Room: Llevant Chair: Erik Lund CoChair: Mathias Stolpe |
|
Postbuckling optimisation of variable angle tow, variable thickness, composite plates using lamination parameters (Keynote Lecture)
Optimal design of composite structures and materials for phononic applications
Comparison of discrete material optimization approaches for optimization of laminated composites
Buckling optimization of composite structures using a discrete material parametrization considering worst shape imperfections
Optimal design of laminated composite structures including local failure criteria and manufacturing constraints by advanced mixed integer nonlinear optimization techniques
Large-scale free material optimization on 3D design domains by an interior point method
Multidisciplinary free material optimization for plate and shell structures
|
|
|
22/7/2014
16:30 - 18:30 Current Trends in Modelling and Simulation of Turbulent Flows I Minisymposium organized by Suad Jakirlic |
MS082A Room: Mestral Chair: Suad Jakirlic CoChair: Stavros Kassinos |
|
Variable resolution modeling of turbulence: Paradigms of closure
An extension and further validation of the pans method in industrially relevant flows
Vehicle aerodynamic effects of realistic transient wind conditions
Application of elliptic blending EVM & RSM RANS models to automotive relevant test cases
Wake simulation of a marine propeller
Modelling turbulent flow within nuclear heat exchangers
|
|
|
22/7/2014
16:30 - 18:30 Industrial Applications of Computational Fluid Dynamics and Related Techniques V |
CS658E Room: Ponent 1 Chair: Riccardo Rossi |
|
On convective structures in vertical cylinder under radiative heating
Investigation of liquefied natural gas (LNG) dispersion using computational fluid dynamics
Coupled multi-physics simulation in electrodialysis for sea water desalination
Chang-Hsieh-Chen Low-Reynolds k-ε turbulence model– Adaptation to study the flow of concentrated pulp suspensions in pipe
The Influence of modified Thom Rotors to the Boundary Layer
Reliability analysis of rocket motor case based on response surface method and importance sampling
|
|
|
22/7/2014
16:30 - 18:30 Advanced Methods in Computational Fluid Dynamics V |
CS655E Room: Ponent 2 Chair: Jesús María Blanco CoChair: Xesús Nogueira |
|
Numerical modelling of laminar flow control on a swept wing by means of plasma actuators
Extremely high- order multioperators-based schemes for smooth and discontinues fluid dynamics solutions
Modelling surface tension dominated multiphase flows using the VOF approach
Direct numerical simulation of oceanic flows around blunt bodies
Investigation of a bubble attached and sliding on a cylinder
Specific aspects of numerical simulation of civil engineering structures with cross section shape close to rectangular
|
|
|
22/7/2014
16:30 - 18:30 Mesh Generation and Adaption I Minisymposium organized by Josep Sarrate, Franck Ledoux and Rafael Montenegro |
MS198A Room: Terral Chair: Josep Sarrate |
|
Parallel time-accurate anisotropic mesh adaptation for time-dependent problems
Parallel mesh generation with a global change in the marching cubes algorithm
Parallel Unstructured Grid Generation Method Based on the Block-Structured Cartesian Grid Approach Aimed for Large-Scale Computations
Parallel mesh adaptation using parallel graph partitionning
Parallel Chimera Method
Thread-parallel mesh improvement using face and edge swapping
Parallel adaptive mesh refinement of turbulent flow around simplified car model using an immerse boundary method
|
|
|
22/7/2014
16:30 - 18:30 Surrogate-based Global Optimization Methods in Preliminary Aerodynamic Design I Minisymposium organized by Esther Andrés and Emiliano Iuliano |
MS102A Room: Tramuntana 1 Chair: Esther Andrés CoChair: Emiliano Iuliano |
|
Adaptive sampling strategies for surrogate-based aerodynamic optimization
PCA-enhanced metamodel-assisted evolutionary algorithms for aerodynamic optimization
Surrogate-based Optimization of the Nose Shape of a Train subjected to Cross-wind
Fast aerodynamic coefficients prediction using SVMS for global shape optimization
Multi-objective surrogate based optimization of gas cyclones using support vector machines and CFD simulations
An automatic aerodynamic design process in a multi-disciplinary context
|
|
|
22/7/2014
16:30 - 18:30 Mechanobiology of Cellular Systems II Minisymposium organized by Marino Arroyo, Antonio DeSimone and Jose J. Muñoz |
MS255B Room: Tramuntana 2 Chair: Antonio DeSimone |
|
An approach for the micro-mechanical simulation of biopolymer networks based on geomerically exact beam elements
In silico exploration of early stage atherosclerosis through stochastic modelling
Computer-based simulation of multicolour bioprinting
Cell-centred model for non-linear tissue rheology and active remodelling
Red blood cell mechanics and membrane fluctuations: Passive versus active
|
|
|
22/7/2014
16:30 - 18:30 Computer Aided Steering in Engineering I Minisymposium organized by Guenther Meschke, Janosch Stascheit, Steffen Freitag and Dietrich Hartmann |
MS144A Room: Xaloc Chair: Janosch Stascheit |
|
Interactive CFD simulation of an operating theatre
Cloud-based computational process controlling in mechanised tunnelling
Automatic feature recognition for rotational parts
Simulation and Monitoring-based Steering for Mechanized Tunneling using Project Data of Wehrhahn-Linie
Steering of mechanized tunneling processes with hybrid surrogate models based on numerical and monitoring data
Recent development in closed-loop visual simulations
Optimized-automated choice of cutting tool machining manufacturing features in milling process
|
|
|
22/7/2014
16:30 - 18:30 Advanced Reduced-order Modeling Strategies for Parametrized PDEs and Applications II Minisymposium organized by Gianluigi Rozza and Andrea Manzoni |
MS069B Room: Salon Club Chair: Andrea Manzoni CoChair: TRAIAN ILIESCU |
|
Kernel-based surrogate modelling for multiscale problems
Reduced collocation methods with parametric preconditioning
Improvement of cheap approximations by a post-processing/reduced basis rectification method.
PDE-constrained optimization using progressively-constructed reduced-order models
2D and 3D global stability analysis based on the modal decomposition of marginally stable flows
A multilevel Monte Carlo reduced basis method for the HDG approximation of stochastic elliptic partial differential equations
Modal response of incompressible flow to external actuation
|
|
|
22/7/2014
16:30 - 18:30 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon V Minisymposium organized by Christian Soize |
MS009E Room: Yasmin A Chair: Hermann G. Matthies CoChair: Christian Soize |
|
Cell and nanoparticle transport in tumor microvasculature and its uncertainty quantification (Keynote Lecture)
Homogenization of a fluid structure model for the propagation of sound in the lungs
Partitioned fluid-structure interaction algorithms in haemodynamics
Fluid–structure interaction analysis of bioprosthetic heart valves
A stabilized Arbitrary Lagrangian Eulerian finite element method for the mixed wave equation with application to diphthong production
Influence of bending resistance on the dynamics of a capsule in shear flow
A three-dimensional semi-analytical model for predicting offshore pile driving noise
|
|
|
22/7/2014
16:30 - 18:30 Multiscale and Multiphysics Modelling for Complex Materials (MMCM5) II Minisymposium organized by Patrizia Trovalusci, Tomasz Sadowski, René de Borst and Bernhard Schrefler |
MS120B Room: Yasmin B Chair: Catalin Picu CoChair: Patrizia Trovalusci |
|
Anisotropic multiscale models applied to oligogranular components (Keynote Lecture)
Computational homogenization of incompressible microstructures
Coarse–graining approaches for particulate composites as micropolar continua
Numerical multiscale modelling of superconducting strand using minimal kinematic boundary conditions (MKBC) procedure of homogenisation.
BEM-Based determination of local and global dynamic properties of 3D elastic composites with disc-shaped inclusions
Micromechanical analysis of porous shape memory alloys
Multi-scale modeling of shockwave interaction with thin layers of strain rate sensitive polymers
|
|
|
22/7/2014
16:30 - 18:30 Phase-field Modeling and Simulation in Fluid Mechanics, Solid Mechanics and Life-sciences II Minisymposium organized by Hector Gomez, Kris van der Zee, Marino Arroyo, Irene Arias, Baskar Ganapathysubramanian, Thomas J.R. Hughes and John T. Oden |
MS143B Room: Yasmin C Chair: Hector Gomez CoChair: Kris Van Der Zee |
|
Phase-field modeling of multiphase flow through rough fractures (Keynote Lecture)
Phase-field modeling of thin-film flows with partial wetting
Diffuse-interface models for wetting and moving contact-line problems
Numerical simulation of two-phase fluid motion in microchannel based on phase-field model
Towards a mutli-scale approach for multi-phase channel flows: Special boundary conditions for the diffuse interface model
|
|
|
22/7/2014
16:30 - 18:30 STS 02: Turbomachinery Challenge |
STS02A Room: Auditorium Chair: to be confirmed |
|
Research frontiers for compressors in aero-engines
Experimental modelling of unstable operation of a centrifugal compressor on a small jet engine in the laboratory
Aerothermal investigation of gas turbine components
Powering tomorrow engines
|
|
|
22/7/2014
16:30 - 18:30 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics V Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051E Room: Sala A Chair: Chieh-Sen Huang CoChair: Aldo Bonfiglioli |
|
Towards rubust, high order and entropy stable algorithms for the solution of the compressible Navier-Stokes equations on unstructured grids
Entropy conservative and entropy stable finite volume/finite element schemes for the Navier-Stokes equations on unstructured meshes
Optimized finite compact schemes applied to aeroacoustic problems
A high-order scheme by multi-moment constrained flux reconstruction and its application on global modelling
High order discontinuous finite-volume/finite-element method for CFD applications
Numerical optimization of enhanced hypervelocity launcher
|
|
|
22/7/2014
16:30 - 18:30 Computational Models for Soft Tissues II Minisymposium organized by Estefania Peña, Renato N. Jorge, Miguel A Martinez and Pedro S. Martins |
MS067B Room: Sala B1 Chair: Estefania Peña |
|
Biaxial mechanical properties of utero-sacral and cardinal ligaments
Simulation of proceed® surgical mesh applied to ventral hernia repair
Orientation of surgical meshes in context of variability of human abdominal wall properties
Mechanical behaviour of soft biological tissues after death
Analysis of urethral pressure during increased intra-abdominal pressure: Biomechanical study using a numerical model
Optimization of Hyperelastic Constitutive Parameters using an Inverse Method
|
|
|
22/7/2014
16:30 - 18:30 Fluid-Structure Interaction Algorithms and Applications II Minisymposium organized by Jonathan Pitt and Scott Miller |
MS062B Room: Sala B2 Chair: to be confirmed |
|
Verification of an overset fluid-structure interaction solver
Over-coming the fluid-structure added-mass instability for incompressible flows
Simulation of a proposed fluid-structure interaction validation case
The Impact of Emerging Supercomputer Architecture on FSI Algorithms
Large-eddy simulations of turbulence-induced vibration in annular flow
Parallel FSI analysis using monolithic coupling method based on level sets
|
|
|
22/7/2014
16:30 - 18:30 Modeling of Plasticity and Damage under Cyclic Loading III Minisymposium organized by Renato Natal, Abílio Jesus and Francisco Pires |
MS039C Room: Sala B3 Chair: Renato Natal CoChair: Abilio de Jesus |
|
A Hysteretic MITC9 Shell Finite Element
The nonlinear numerical analysis of solid mechanics problems using meshless methods
A new methodological approach for elastoplastic calculations
Numerical simulation of the dissipated and stored energies in metals under cyclic loading
Simulation of biaxial fatigue crack growth in various microstructures modelled by using Varonoi-polygons
|
|
|
22/7/2014
16:30 - 18:30 Advanced Models for Large-Eddy Simulation and Regularization of turbulent flows I Minisymposium organized by Roel Verstappen and Francesc Xavier Trias |
MS151A Room: Sala C1 Chair: Francesc Xavier Trias |
|
A mixed multiscale model accounting for the cross term of the sub-grid scale stress
Discretizations and regularization models for compressible flow that preserve the skew-symmetry of convective transport
On the blending of regularization and Large-eddy simulation models
Scale-truncation models for large-eddy simulation
|
|
|
22/7/2014
16:30 - 18:30 Frontier in Multi-physics CFD Simulation I Minisymposium organized by Nobuyuki Oshima, Makoto Yamamoto and Mamoru Tanahashi |
MS033A Room: Sala C2 Chair: Nobuyuki Oshima |
|
SLD Icing Simulation on NACA Airfoil using MPS Method
Drag-reduction effect of sinusoidal riblets in turbulent channel flow by direct numerical simulation
Kinetic models with rotational degrees of freedom for hybrid methods
Icing simulation on jet engine with temperature change of super-cooled droplet
Large-eddy simulation of transient behavior in a combustion field for gus-turbine engine
A hierarchical Cartesian immersed boundary method for conjugate heat-transfer involving moving solid bodies
|
|
|
22/7/2014
16:30 - 18:30 Multidisciplinary Design Optimization In Computational Mechanics I Minisymposium organized by Piotr Breitkopf, Weihong Zhang and Rajan Filomeno Coelho |
MS031A Room: Sala C3 Chair: Piotr Breitkopf CoChair: Pierre Villon |
|
On-line surrogate-based optimization with multiple kernel regression for continuous and categorical variables (Keynote Lecture)
Conceptual design of tires using multi-objective design exploration
Multi-Objective Shape Optimization of a car inner hood panel using premeshed parameterized forms
The Optimization Analysis Method of the best performance of hydrodynamic and structure features for ship in inland river
Surrogate model-based reliability analysis of high performance engine gaskets
Variable speed power turbine preliminary design optimization for rotorcraft applications
|
|
|
22/7/2014
16:30 - 18:30 Fast Direct Solvers: Applications to Boundary Element Methods and Other Linear Systems II Minisymposium organized by Stéphanie Chaillat-loseille, Eric Darve and Martin Schanz |
MS200B Room: Sala D1 Chair: Stéphanie Chaillat |
|
A fast direct solver for one periodic boundary value problems for Helmholtz‘ equation in 2D
Linear computational cost galois based Graph grammar direct solver for H adaptive grids
A dynamic programing algorithm for construction of a class of optimal elimination trees for multi-frontal solver algorithm executed over h refined grids
A fast direct solver for the boundary element method with PMCHWT formlation
Fast direct linear solvers for the boundary element method
|
|
|
22/7/2014
16:30 - 18:30 Advances in Computational Structural Dynamics II Minisymposium organized by Evangelos J. Sapountzakis and Andreas E. Kampitsis |
MS018B Room: Sala D2 Chair: Cristina Medina |
|
Boundary Element Formulation for the Inelastic Dynamic Analysis of Beams (Keynote Lecture)
A BEM-FEM model for dynamic soil–structure and structure–soil–structure problems in elastic or poroelasctic soils
On the effect of geometric nonlinearity on resonance in a machine foundation
Parallel solution of elastoplastic problems with numerical experiments
Seismic response of deep foundations and piled structures considering inclined piles
|
|
|
22/7/2014
16:30 - 18:30 Shape and Topology Optimization in Fluids and Structures I Minisymposium organized by Toshiro Matsumoto, Masato Yoshino and Takayuki Yamada |
MS176A Room: Sala D3 Chair: Toshiro Matsumoto CoChair: Hannes Lück |
|
Level set-based topology optimization for a coupled thermal-fluid problem using the Lattice Boltzmann Method
Thermal fluid-structure interaction based optimization of secondary air flows in rotor stator cavities of aircraft turbines
Design optimization for isothermal microreactors
Adaptive CFD-enhanced windage modelling for aero engine turbine rotor-stator cavities
Adjoint optimization of 2D-Airfoils in incompressible flows
Analysis and optimization of a liquid Pb-Bi target for ISOL facilities
Topology optimization method for three-dimensional flow field using transient information of Lattice Boltzmann method
|
|
|
22/7/2014
16:30 - 18:30 Advances with Adjoint CFD Solvers for Unsteady Flow II Minisymposium organized by Jens-Dominik Mueller, Carsten Othmer, Jacek Rokicki, Kyriakos Giannakoglou, Uwe Naumann, Marcus Meyer, Eugene de Villiers, Mustafa Megahed and Laurent Hascoet |
MS214B Room: Sala D4 Chair: Jens-Dominik Mueller |
|
On the forward in time solution of the unsteady adjoint equations (Keynote Lecture)
Towards converged adjoint state for large industrial cases by improving the discretization schemes
Adjoint-based shape optimization at isoconnectivity through robust mesh deformation
Flow control sensitivities for unsteady vehicle aerodynamics
Efficient optimization algorithms for optimal control of turbulent flows
|
|
|
22/7/2014
16:30 - 18:30 Numerical Predictions of Detached Flows II Minisymposium organized by Esteban Ferrer, Eusebio Valero and Vincent Couaillier |
MS126B Room: Sala D5 Chair: Vincent Couaillier |
|
Discrete sensitivity analysis of a NACA0015 aerofoil
Automatic HP adaptation for discontinous Galerkin by means of Ƭ-estimation
Goal-oriented mesh adaptation with applications to RANS flows
Compressibility effects on combined gap/step geometries at rarefied hypersonic flow
Numerical Investigation of Rod Vortex Generators on Hovering Helicopter Rotor Blades
Dynamic decomposition and analysis of a supersonic impinging jet flow
Encapsulated formulation of the selective frequency damping method
|
|
|
22/7/2014
16:30 - 18:30 Innovative Fictitious Domain Approaches for High-order Methods and IGA II Minisymposium organized by Alexander Düster, Ernst Rank and Dominik Schillinger |
MS117B Room: Sala D6 Chair: Jamshid Parvizian |
|
High-Order X-FEM to handle geometrical details : Improved convergence for quasi-singular solutions (Keynote Lecture)
Multi-level hp-FEM: High-order mesh adaptivity without the difficulties of hanging nodes
Additive production processes modelled with high-order embedded domain methods
A higher-order fictitious domain method for the modeling of thermoelastic deformations in NC milling
The finite cell method for fluid and fluid-structure interaction problems
On the control of spurious force oscillations for moving body problems using an immersed boundary method
A non-intrusive global-local approach for the coupling of laminated plates and 3D models.
|
|
|
22/7/2014
16:30 - 18:30 Embedded Interface Methods I Minisymposium organized by John Dolbow, Isaac Harari and Adrian J. Lew |
MS066A Room: Sala E1 Chair: John Dolbow |
|
Implicit representation of boundaries using level-sets for transient machining application
Residual schemes for penalized Navier-Stokes equations on adapted grids
Universal meshes for problems with moving boundaries
Universal Meshes: High-order simulation of problems with evolving geometries
A Nitsche stabilized finite element approach for modeling frictional contact constraints
Application of the LS-STAG immersed boundary method for numerical simulation in coupled aeroelastic problems
|
|
|
22/7/2014
16:30 - 18:30 Recent Developments in Fluid–structure Interactions of Physiological Systems II Minisymposium organized by Jeff D. Eldredge and Rajat Mittal |
MS229B Room: Sala E2 Chair: Jeff Eldredge |
|
Cardiac electro-fluid-mechanics in health and disease
Predilections of cardioaortic embolic transport
Toward patient-specific simulations of airway collapse in obstructive sleep apnea
From image/video to computations of cardio-vascular flows
Numerical simulation of the blood flow in the aortic root with a non-Newtonian fluid model
|
|
|
22/7/2014
16:30 - 18:30 Advances in Constitutive Modelling of Metal Forming Processes across Different Lengthscales I Minisymposium organized by Ivaylo N. Vladimirov, Robertt A. F. Valente, Ricardo Alves de Sousa and Myoung-Gyu Lee |
MS065A Room: Sala E3 Chair: Ivaylo Vladimirov |
|
Material characterization of a ferritic stainless steel sheet with different yield criteria at elevated temperature
A reduced-order model of Titanium alloy for the control of microstructure-sensitive material properties
Effective utilization of experimental data to improve the prediction accuracy of yield coefficients
Simulation of large inelastic deformations including damage-induced porosity within anisotropic viscoplasticity
Modelling of biaxial deformation behavior in an aluminium alloy sheet using homogenized crystal plasticity finite element method
|
|
|
22/7/2014
16:30 - 18:30 Advances in Numerical Methods for Flexible Multibody Mechanics II Minisymposium organized by Olivier Bauchau, Olivier Bruls and Alberto Cardona |
MS235B Room: Sala E4 Chair: to be confirmed CoChair: Olivier Bruls |
|
Input-Output based model order reduction for interconnected systems
Method of model reduction for elastic multibody systems
Efficient computational methods for flexible multibody dynamic systems with aerodynamic interactions
Simulating the remote handling of the blanket segments in demo fusion reactor with thermo-mechanical meshfree multibody dynamics
|
|
|
22/7/2014
16:30 - 18:30 New Trends in Zigzag Theories for Multi-layered and Sandwich beams, Plates, and Shells I Minisymposium organized by Marco Di Sciuva, Alexander Tessler and Marco Gherlone |
MS224A Room: Sala E5 Chair: Marco Di Sciuva |
|
Recent advances and applications of the Refined Zigzag Theory (Keynote Lecture)
A comparison of Zigzag functions for the bending, vibration and buckling analysis of multilayered composite and sandwich plates
A mixed cubic zigzag model for multilayered composite and sandwich plates including transverse normal deformability
On explicit analytic solutions for the accurate evaluation of the shear stress in sandwich beams with a clamped end
Exact formulas for bending of sandwich beams using the Refined Zigzag Theory
Enhanced visco-elastic FEM analysis of laminated composite plates using a first-order shear deformation theory
|
|
|
22/7/2014
16:30 - 18:30 Biomechanics and Applied Dynamics II Minisymposium organized by Josep M. Font-Llagunes and József Kövecses |
MS134B Room: Sala E6 Chair: Josep M. Font-Llagunes CoChair: Daniel Garcia Vallejo |
|
2D ICP-based robust 2D-3D registration for bi-plane fluoroscopic analysis of skeletal kinematics
Experimental identification of inertial parameters of human body segments. Application to the head
Virtual thermal manikin – mathematical modelling of human thermoregulation
An efficient algorithm for simulation of forced deformable bodies interacting with incompressible flows: Application to fish swimming
Numerical investigation of fatigue behavior of dental implant applications
|
|
|
22/7/2014
16:30 - 18:30 Computational Contact Mechanics V Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044E Room: Sala F Chair: Przemyslaw Litewka |
|
An energy consistent approach for elastodynamic frictional contact problems
A penetration-free nonsmooth dynamics method for frictionless contact/impact problems
Numerical study of convergence of the mass redistribution method for elastodynamic contact problems
Analysis of a dynamic contact problem involving a nonlinear thermoviscoelastic beam with second sound
Contact-impact treatment based on the bipenalty technique in explicit transient dynamics
A reaction force computation scheme for contact analysis with quadratic tetrahedral elements
Isogeometric contact analysis using a third medium
|
|
|
22/7/2014
16:30 - 18:30 Computational Modeling of Fracture and Failure of Materials and Structures V Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226E Room: Sala H 1 Chair: Gilles Pijaudier-Cabot |
|
Crack propagation modelling using the scaled boundary finite element method: A finite fracture mechanics approach
Coupling local and non-local damage evolutions with the Thick Level Set Model
Joint computational and analytical approach to characterize auto-similar crack propagation with the Thick Level Set damage model
Fracture process zone evolution in the course of failure in quasi-brittle materials: Numerical investigations and experimental validations at the mesoscale
CrachFEM – A comprehensive approach for the prediction of failure in metallic materials
Three dimensional fracture growth as a standard dissipative system: some general theorems and numerical simulations
On strain localization under bending
|
|
|
22/7/2014
16:30 - 18:30 Isogeometric Methods V Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049E Room: Sala H 2 Chair: Michael Scott |
|
Volumetric T-spline construction for complex geometry (Keynote Lecture)
Advances on T-spline parameterization based on the meccano method
Semi-structured T-splines
Geometry-independent field approximation for spline-based Finite Element Methods
Local hierarchical p-, hp-, and k-refinement in isogeometric analysis
Localised multigrid isogeometric analysis with controlled accuracy
Injecting the isogeometric paradigm into industrial applications: the terrific project
|
|
|
22/7/2014
16:30 - 18:30 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials V Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012E Room: Sala H 3 Chair: Régis Cottereau CoChair: Felix Fritzen |
|
Modeling and designing doubly porous materials: An approach by homogenization
Energy Bounds for Homogenization of Stokes‘ Equations Using Periodic Boundary Conditions
Stochastic modeling of interphase effects for nanoreinforced heterogeneous materials
A study on the hierarchical multiscale modeling on polymer nanocomposites with elastoplastic behavior
Multiscale modeling and molecular dynamics characterization of surface effects in polymer thin films
A decoupled approach for computing the response of structures made of heterogeneous, random elastoplastic composites with hardening
Multi-physics modeling and simulations of thermally-assisted compaction of granular materials
|
|
|
22/7/2014
16:30 - 18:30 Computational Biomechanics V Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007E Room: Sala J Chair: Alexander Rachev CoChair: Maria Holland |
|
Identification of material parameters of soft tissue: Towards integrative inverse analysis based on image similarity (Keynote Lecture)
Simulation of arterial walls under consideration of residual stresses - A numerical approach
Applicability of simplified models of abdominal aortic aneurysms
A high-order viscoelastic fractional element applied to modeling ovine arterial wall behavior
A viscoplastic theory of saccular aneurysm enlargement and growth
Static and dynamic bending of rectangular sheet of biomaterial
|
|
|
22/7/2014
16:30 - 18:30 Coupling Full-Field Measurements and Computations: Material Characterisation and Model Identification I Minisymposium organized by Roberto Fedele, François Hild and Julien Réthoré |
MS056A Room: Business Centre I Chair: Roberto Fedele CoChair: Jean-Charles Passieux |
|
A domain decomposition approach for digital image correlation based identification of local elastic parameters
Multiscale FE digital image correlation and material parameter identification
3D elliptical crack depth estimation from 2D surface displacement observation
Characterization of CFC/Cu joints by full-field measurements and finite elements
Identification of crystal plasticity law parameters using kinematic measurements in polycrystals
Elasto-plastic parameter identification through finite element model updating
Strain reconstruction from stereo DIC measurements based on space-time diffuse approximation
|
|
|
22/7/2014
16:30 - 18:30 Computational Modelling of Native and Engineered Cardiovascular Tissue I Minisymposium organized by Ilinca Stanciulescu and Ellen Huhl |
MS090A Room: Business Centre II Chair: Ilinca Stanciulescu |
|
A continuum model for active cardiac muscle
Modeling the role of oscillatory flow and dynamic mechanical conditioning on dense connective tissue formation in mesenchymal stem cell derived heart valve tissue engineering
Understanding the relationships between heart valve scaffold geometric structure and mechanical behavior using computational modeling
Numerical modeling of the mechanical behavior of anisotropic patterned hydrogel
Fluid-structure interaction analysis utilising a comprehensive mitral valve model
Material boundary modeling of soft tissue compositions for simulation of transcatheter aortic valve implantation
|
|
|
22/7/2014
16:30 - 18:30 Innovative Numerical Approaches for Multi-physics Problems I Minisymposium organized by Anna Pandolfi, Laurent Stainier and Kerstin Weinberg |
MS129A Room: Sala de prensa I Chair: Laurent Stainier |
|
A computational framework for polyconvex large strain electromechanics (Keynote Lecture)
A computational framework for polyconvex large strain electromechanics. Applications
On constitutive relationships and design optimization of electroactive polymers
Modelling of ball bearing loading by DEM for electromechanical coupling
MEMS energy harvesters based on aeroelastic phenomena
Numerical Simulation of Electromagnetic Coupling in the Lithosphere-Atmosphere-Ionosphere (LAI) System Associated with the Seismogenic Process
|
|
|
22/7/2014
16:30 - 18:30 Microstructural Based Constitutive Models in Hard and Soft Matter Materials I Minisymposium organized by Christian Miehe, Samuel Forest and Christian Linder |
MS140A Room: Sala de prensa II Chair: Christian Miehe CoChair: Samuel Forest |
|
A computational investigation of hardening relations for gradient single-crystal plasticity (Keynote Lecture)
Direct coupling between molecular dynamics and continua: A thermo-mechanical approach
Modeling of grain boundary resistance in a strain gradient crystal plasticity model
Modeling of single crystal magnetostriction based on numerical energy relaxation techniques
Structural defects and dynamic properties of metals
Local Eshelby matrix enhanced eigenstrain BIE for 3-D analysis of particles in full space
|
|
|
22/7/2014
16:30 - 18:30 Multiscale Computational Formulation of Concrete and Other Quasi-Brittle Materials I Minisymposium organized by Erez Gal and Gianluca Cusatis |
MS175A Room: Sala de Reservas Chair: Erez Gal |
|
Modelling nanoscale deformations in cement pastes: Implications for strength and durability
Concrete mesostructure geometry modelling with growing and colliding hard spheres
The local response in structures using the embedded unit cell approach
Multi-axial validation of a simple lattice discrete elements model for heterogeneous quasi-brittle material
FE studies on a coupled energetic-statistical size effect in concrete
Meso-scale FE and morphological modeling of cementitious material
|
|
| POSTER SESSIONS | |
|
21/7/2014
16:00 - 18:30 Poster Session ECCM |
PSECCM Room: Hall Chair: to be confirmed |
|
Life prediction of large bearings using accelerated life test coupled with analysis
A couple stress theory for the analysis of plates with a RBF-FD meshless method
A FEM-DEM coupled and evolved formulation for analysis of multifracture in solids
B-Spline and reproducing polynomial particle shape functions for linear and nonlinear elasticity problems
A motion planning scheme for robotic in-hand object manipulation
A model of the tongue movement during swallowing
A new fem homogenization of periodic material based on an extended Rosette gage theory
A Numerical Approach to Evaluate the Seismic Performance of Water Supply Systems Based on Demand and Capacity in the Damaged Network
A numerical framework to model the mechanical behavior of bioresorbable polymeric braided wire stents
A relation between calculation error and modelling resolution of DEM
A water state study in the wood structure of four hardwoods below fiber saturation point by NMR technique
Adaptive surrogate-based multi-criteria optimization
An explicit algorithm for the nonlinear dynamics of spatial beam
Analysis of offshore structures for wind turbines and oil&gas using xsea software
Analysis of thick-walled pipeline elements operating in creep conditions
Analysis on a 2T2R type asymmetric parallel mechanism
Anisotropic growth of thin shells with subdivision elements
Application of fracture mechanics to assess the concrete damage due to cyclic freezing and thawing
Comparison of muscular movement following blood alcohol concentrations using low speed rear impact tests and dynamic simulation
Computational and experimental investigation of the all fracture mode specimens on mixed mode I/III and II/III fracture
Computational design of a pressure container manufactured by fiberglass sheets to industrial applications
Computational study of the effect of hydrostatic pressure on plastic deformation of metallic glass
Continuum-discontinuum particle method
CUFESAP: A CUDA based finite element code for elastic structural analysis on GPUs
Description model of cross-section of fibre bundle shape in prepreg composite
Design of smart structures with shape-reserved actuators
Determination of forming limit diagram using finite element method
Development of an automated framework for high intensity focused ultrasound simulations
Development of cosmetic orthodontic bracket and bracket cover
Effective thermal conductivity in anisotropic materials using boundary element methods
Emulating drilling degrees of freedom in the rotation-free Bézier-Enhanced Shell Triangle (BEST) finite element
Fatigue life analysis of an upgraded diesel engine crankshaft
FE modelling of frictional heating in a disc brake at temperature-dependent coefficient of friction
Finite element analysis of AZ31B magnesium alloy double butted tube forming process
Finite element analysis of the quasi-static thermal stresses in a pad-disc brake system
Finite element study of healthy, pathological and surgical lumbar spine biomechanics.
Finite element supporting thermoelectric effects in FGM materials
Formability of ZK60A magnesium alloy
GPU high performance explicit solution for kinematics and dynamics simulation of crank-connecting rod-piston mechanism
High order finite element method on the IBM power systems high performance computing applied on structural mechanics
Influece of material atomistic model on MD simulation
Influence of shape of particle size distribution on mechanics of uniaxially compressed granular packings
Mainshock – aftershock interaction diagram for a 3D plan-asymmetric structure
Mechanical behavior of carbon nanotubes encapsulating copper atoms
Mechanical properties of realistic materials: From quantum calculations to plastic flow
Micromechanism-based elasto-viscoplasticity constitutive modeling for engineering intermetallics
Modelling dynamic behaviour of orthotropic metals
Natural frequencies of a simply supported horizontal rectangular tank partially filled with a liquid
Nonlinear isogeometrical approach to stress recovery
Numerical and experimental study by BEM and thermal Images for predicting the effective thermal conductivity
Numerical simulation for temperature and stress distribution in laser forming process of AHSS
Numerical simulation of rock fragmentation process induced by indenter
Numerical simulation of the energy storage rate in metals under quasistatic loading
Numerical study of a thermo-acoustically encapsulation
Numerical study of actuatot performance of piezoelectric ink-jet print head
Quantitative estimation of exercise effect using numerical simulation and multi-sensory system on human leg
Reducing the number of runs in experimental research using smart designs of experiment
Scattering of semi-cylindrical gap and multiple shallow-buried cavities and inclusions by SH-wave
Seismic performance analysis of the hall-column system of a temple structure
Simulating soil-building interaction with a FEM/BEM approach
Simulation of implanted aortic stents
Soil-foundation-structure interaction by an explicit time integration method
Stiffener Layout Optimization of Thin-Walled Stiffened Plates
Stress concentration near sharp and rounded V-shaped notches in two-dimensional bodies
Application of the strong discontinuity method to ductile failure with damage
Structural design of metallic waveguide device in the microwave range using topological design process
Structural health monitoring of stay cables by the Scruton number
Studies of bimaterial interface fracture with peridynamics
Surgical treatment of shoulder injuries by the Weaver Dunn technique
The correlation between complicated lateral resisting system of the Shanghai tower
The effect of damage on the biomechanical behavior of the pelvic floor
The Poynting type effect and non-homogeneous radial deformation in the problem of torsion of hyperelastic circular cylinder
The relationship between the fast wave and the fabric tensor
Thermomechanical modelling of PCM in heat storage applications
Toward a polycrystal modeling of martensitic phase transformation based on the mechanism of Magee
Two level FETI method for transient problems
|
|
|
21/7/2014
16:00 - 18:30 Poster Session ECFD |
PSECFD Room: Hall Chair: to be confirmed |
|
A CFD solver on graphical processing unites for turbulence simulations
A comparison between Monte Carlo and polynomial chaos expansion techniques in reservoirs simulations
A high order compact scheme for hypersonic internal flow with turbulence models
A multi-level computational model to characterize the hepatic circulation in human cirrhosis
A Numerical investigation of scramjet engine air intakes for the 14-X hypersonic vehicle
A Shape Analysis of Ultrasonically Levitated Droplet with Moving Particle Semi-implicit and Distributed Point Source Method
Adaptive Galerkin Method with relevant basis functions for PDES with boundary conditions
Advances of continuous-discontinuous numerical method based on Lagrange equation
An Immersed Smoothed Finite Element Method for analyzing fluid-structure interaction systems consisting of dielectric elastomers
Application of EARSM turbulence model to simulation of reacting flow field in jets engines combustion chamber
Comparison of implicit LU-SGS schemes for hypersonic flows
Development of explicit unstructured mesh-based CFD solver for low-mach number flows using graphics processor units
Effect of Reynolds number on pressure losses in axisymmetric sudden expansions with chamfer
Evaluation of an immersed boundary method for solving the fluid structure interaction problem in refrigeration compressor valves
Flow recirculation in VHC designs
Investigation of Hydrodynamic Processes in Geothermal Plant
Mechanism of modulation of the chemical activity of metal nanoparticles through organic charge-transfer molecules
Mixing of two-phase flow in rotating microchannels with a circular chamber
Modelling of interaction between suspension and structure in a tumbling mill
Modified dynamic observers based on green functions method to solve a 3D transient IHCP
Multiphase flow modelling of explosive volcanic eruptions using an adaptive unstructured mesh-based approach
Multiscale modeling of solid-liquid interface ordering and its effect on the growth kinetics of metallic alloys
Non-conforming mimetic and virtual element discretization for polyhedral meshes
Numerical predictions of viscoelastic flows with an algebraic extra-stress model
Numerical Simulation of Incompressible Flow around Aerofoil Vibrating with Two Degrees of Freedom
Numerical study of the cooling air flow in a hydro generator with various ventilation schemes
Porous medium modeling for air flow through forest-comparison with wind tunnel data
Simulation of separation processes incorporating magnetic nanoparticle recovery in continuous microfluidic systems
Simulations of a single turbulent vortex ring using a regularized particle-mesh based vortex method
Sphere in Poiseuille: Static, free rotation and free fall
Submesoescale processes in upper ocean fronts: a numerical study using a Reynolds Stress Turbulence Model
The free-stream turbulence effect on the laminar-turbulent transition in the swept wing boundary layer
The initial-boundary Riemann problem for the solution of the compressible gas flow
System for reconsting images of internal defects by inverse problem solving
Prediction of pulsatile 3D flow in elastic tubes using star CCM+ Code
Ultrasonic image reconstruction of internal defects derived by EMAT using truncated singular value decomposition
Wake equilibrium parameters on a symmetric airfoil simulations
An XFEM based sharp interface approach for two-phase and free-surface flows
|
|
Wednesday, July 23rd |
|
|
23/7/2014
09:00 - 10:30 Plenary Lectures II |
PL2 Room: Auditorium Chair: Genki Yagawa CoChair: Charbel Farhat |
|
Multi-scale computations diversified: From material to disaster sciences
Simulation and design in nanophotonics
|
|
|
10:30 - 11:00 Coffee Break & Poster Sessions |
|
|
11:00 - 13:00 TECHNICAL SESSIONS |
|
|
23/7/2014
11:00 - 13:00 Advances in Numerical Methods for Linear and Non-linear Dynamics II Minisymposium organized by Alexander Idesman and Gregory Hulbert |
MS087B Room: Mare Nostrum A Chair: Alexander Idesman CoChair: Gregory Hulbert |
|
A family of discontinuous-Galerkin-based variational time integrators
Stability analysis of high order phase fitted variational integrators
High-order integration for flexural wave equation and dispersion
Evaluation of time integration schemes in elastodynamics using numerical amplification matrices
Accurate explicit finite element method for wave propagation and dynamic contact problems
High order theta-schemes for linear wave equations
|
|
|
23/7/2014
11:00 - 13:00 Advances in Shape and Topology Optimization of Structures and Materials II Minisymposium organized by Michael Wang, Zhen Luo and Takayuki Yamada |
MS494B Room: Mare Nostrum B Chair: Zhen Luo CoChair: Gil Ho Yoon |
|
H-DGTP—a heaviside-function based directional growth topology parameterization for design optimization of stiffener’s layout and heights of thin-walled structures (Keynote Lecture)
Stress based topology optimization for FSI structure
Finite strain phase-field based topology optimization
Stress-related topology optimization of continuum structures involving multi-phase materials
Isogeometric Configuration Design sensitivity analysis using boundary integral method
Optimization of structures with hybrid uncertainties
|
|
|
23/7/2014
11:00 - 13:00 Discontinuous Galerkin Methods: New Trends and Applications I Minisymposium organized by Bernardo Cockburn, Sonia Fernandez-Mendez, Nicoletta Franchina, Ngoc-Cuong Nguyen, Jaime Peraire and Per-Olof Persson |
MS139A Room: Mare Nostrum C Chair: Bernardo Cockburn |
|
Hybridizable Discontinuous Galerkin Methods for Continuum Mechanics
On the robustness of a HDG method for elliptic problems in general domains
Extended hybridizable Discontinuous Galerkin (X-HDG) for bimaterial problems
Implicit Large Eddy Simulation of turbulent flows with the Hybridized Discontinuous Galerkin Method
Adjoint-based anisotropic hp-adaptive hybridized discontinuous Galerkin methods for turbulent flow
A unified hybridized discontinuous Galerkin framework and its application to PDEs
|
|
|
23/7/2014
11:00 - 13:00 Computational Fluid Dynamics for Free and Moving Boundaries II Minisymposium organized by Rekha R. Rao, David R. Noble, Scott A. Roberts and Elie Hachem |
MS256B Room: Mare Nostrum D Chair: Scott Roberts CoChair: Rekha Rao |
|
Numerical investigation of three dimensional viscoelastic free surface flows: impacting drop problem
A new approach for solving the Oldroyd-B model for 3D free surface flows
Stress-gradient induced migration in thin film flow over topography
Foam property prediction from process modeling
Towards a refined model for liquid bridge filling between wet particles
Spectral Boundary Element Algorithms for Multi-Length Interfacial Dynamics in Porous Media and Microfluidic Channels
|
|
|
23/7/2014
11:00 - 13:00 Uncertainty Modeling and High Performance Stochastic Methods for Computationally Intensive Calibrations, Predictions and Optimizations II Minisymposium organized by Tan Bui-Thanh, Thomas Carraro, Marko Laine and Ernesto E. Prudencio |
MS184B Room: Mare Nostrum E Chair: Ernesto Prudencio |
|
Validation and Uncertainty Quantification in CASL Nuclear Reactor Modelling
Solving stochastic FEM problems with high performance domain decomposition in GPUs
Stochastic reduced order models for inverse problems in the presence of uncertainty
Dimension-independent, likelihood informed MCMC samplers for bayesian inverse problems
Multi model mixture density estimators & information theory for stochastic filtering and prediction
Integration of surface uplift and injection data for estimation of geomechanical properties and reservoir parameters of a CO2 sequestration field using ensemble-based algorithms
|
|
|
23/7/2014
11:00 - 13:00 Current Challenges in Cohesive-zone Models II Minisymposium organized by Albert Turon, Giulio Alfano and Bent F. Sørensen |
MS196B Room: Mare Nostrum F Chair: Giulio Alfano |
|
On the path dependence of cohesive zone elements under mixed-mode fracture
A critical review of traction-separation relationships across fracture surfaces for cohesive zone models of fracture
Investigating path dependency in mixed-mode fracture by using cohesive zone models
Delamination under fatigue loads in composite laminates: A review on the computational methods based on the cohesive zone model approach
Performance of cohesive zone models for fatigue driven delaminations
A cyclic cohesive zone model for transient thermomechanical loading
|
|
|
23/7/2014
11:00 - 13:00 Multiscale Analysis and Design Under Uncertainty I Minisymposium organized by George Stefanou, Vissarion Papadopoulos, X. Frank Xu and Manolis Papadrakakis |
MS269A Room: Llevant Chair: Vissarion Papadopoulos CoChair: George Stefanou |
|
Multiscale stochastic stress analysis for randomness of fiber arrangement in fiber reinforced composite material (Keynote Lecture)
Effective properties of two-phase random media modeled by XFEM
Random tessellation modeling for granular microstructure morphologies
Scale-space based multiscale random field modelling with local pattern matching
FE2 multiscale approach of geometrically nonlinear carbon nanotube reinforced composites
Multiscale modelling of carbon nanotube reinforced composites in the framework of a nested solution scheme
|
|
|
23/7/2014
11:00 - 13:00 Current Trends in Modelling and Simulation of Turbulent Flows II Minisymposium organized by Suad Jakirlic |
MS082B Room: Mestral Chair: Suad Jakirlic CoChair: Branislav Basara |
|
On the wake transition in the flow past a circular cylinder at critical Reynolds numbers
Computation of the one-point turbulence structure tensors in fully-developed turbulent pipe flow
A differential structured-based model based on stochastic evolution equations for the scalar turbulence parameters
Generalized Navier-Stokes model with viscous strength
Computations of laminar and turbulent water hammer flows
Turbulent thermal mixing in a T-junction, advanced RANS versus scale resolving simulation
|
|
|
23/7/2014
11:00 - 13:00 Industrial Applications of Computational Fluid Dynamics and Related Techniques VI |
CS658F Room: Ponent 1 Chair: Luis Ramirez |
|
Enhanced growth of single- and multi-crystalline semiconductors using pulsed travelling magnetic fields
Effect of rotor-rotor interactions in aerodynamic performance of multi-rotor air vehicle
Influence of closure system and volume on auditorium thermal and acoustic performance
Modeling the polymer conversion dependent viscosity change in the production of themoplastic materials
Shaping of aircraft and helicopter configurations with CAD
Numerical study of the influence of the oil mist particle sizes used in MQL by internal canalizations on a surfacing operation
|
|
|
23/7/2014
11:00 - 13:00 Industrial Applications of Computational Solid Mechanics and Related Techniques I |
CS659A Room: Ponent 2 Chair: Antonio Rodriguez-Ferran |
|
Study on Improvement of Passive Cooling in Distribution Transformers
Controlling eutrophication in a moving domain
The prediction of plastic damage degree of stiffened cylindrical shell considering of hydrostatic pressure
Analysis of local property within masonry panels using cellular automata
Coupled thermomechanical computation method for virtual design processes of brake discs
SAPNOLM – A software package for landslide analysis
|
|
|
23/7/2014
11:00 - 13:00 Mesh Generation and Adaption II Minisymposium organized by Josep Sarrate, Franck Ledoux and Rafael Montenegro |
MS198B Room: Terral Chair: Josep Sarrate |
|
Generation of hex dominant meshes based on frame fields skeletons
Hierarchical mesh smoothing and untangling for two and three dimensional meshes
Universal Meshes: Computing tetrahedralization conforming to curved surfaces as boundaries and interfaces from background meshes
Aligned Metric-Based Anisotropic Solution Adaptive Mesh Generation
Anisotropic mesh adaptation for the crack path detection in quasi static brittle materials
Tetrahedral mesh optimization combining boundary and inner node relocation and adaptive local refinement
|
|
|
23/7/2014
11:00 - 13:00 Smart Structures - Modelling and Simulation I Minisymposium organized by Ruediger Schmidt |
MS086A Room: Tramuntana 1 Chair: Shunqi Zhang |
|
Geometrically nonlinear FE modeling for piezoelectric integrated plates and shells (Keynote Lecture)
Computational modeling of a multi-layered piezo-composite beam made up of MFC
Nonlinear dynamic deformation of a piezoelastic laminated beam with feedback damping mechanism.
Analytical model for sampling-based reliability analysis of output electric power generated by piezoelectric energy harvesting skin under uncertainty
XFEM modeling of magnetoactive materials
|
|
|
23/7/2014
11:00 - 13:00 Qualitative and Quantitative Comparison of Numerical Methods for Solving Partial Differential Equations I Minisymposium organized by Scott T. Miller, Reza Abedi and Jonathan Pitt |
MS251A Room: Tramuntana 2 Chair: Reza Abedi |
|
Inductive verification of numerical methods for well-posed problems
Comparison of various approaches for modelling interaction of dispersive media and electromagnetic waves
Using high-performance computing for accelerating linear dynamic and nonlinear implicit commercial FEA software
Construction of preconditioners by using high-order minimum energy basis
Hybridized discontinuous Galerkin Methods for Large Eddy Simulation of turbulent flow
|
|
|
23/7/2014
11:00 - 13:00 Sheet Metal Forming and Mechanical Characterization I Minisymposium organized by Abel Santos, Marian Gutierrez and Luis Menezes |
MS234A Room: Xaloc Chair: Abel D. Santos |
|
Modelling non-quadratic anisotropic yield criteria at finite strains with mixed isotropic-nonlinear kinematic hardening: Application to sheet metal forming
Finite element analysis of wrinkling during cup drawing
Hydraulic bulge test for stress-strain curve determination and damage calibration for Ito-Goya model
The use of finite element analysis on bending radius and springback prediction with practical application on CNC press brakes programming
Modelling of air bending using neural networks
|
|
|
23/7/2014
11:00 - 13:00 Advanced Reduced-order Modeling Strategies for Parametrized PDEs and Applications III Minisymposium organized by Gianluigi Rozza and Andrea Manzoni |
MS069C Room: Salon Club Chair: Irina Kalashnikova CoChair: Yanlai Chen |
|
Projection-based ROMs for parametrized optimization problems constrained by PDEs: Results and applications
Progressive construction of reduced tensor spaces for high-dimensional approximation
Long term forecasting of building systems: CFD, stochastic collocation and Perron Frobenius based model reduction
Parallelized multi-level reduction method for large-scale dynamic analysis and design optimization
Sequential dynamic mode decomposition for a flow past a sphere
|
|
|
23/7/2014
11:00 - 13:00 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon VI Minisymposium organized by Christian Soize |
MS009F Room: Yasmin A Chair: Lothar Gaul CoChair: Christian Soize |
|
Stochastic model reduction and multiscale modeling with uncertainty (Keynote Lecture)
Coupled stochastic problems
Linear/nonlinear geometric thermoelastic response of structures with uncertain thermal properties
Nonparametric modelling of multi-stage assemblies of mistuned bladed disks
Adaptive ISDE-based algorithm for the generation of non-Gaussian vector-valued random fields
Computational dynamics in low- and medium-frequency ranges, reduced-order model and uncertainty quantification
|
|
|
23/7/2014
11:00 - 13:00 Multiscale and Multiphysics Modelling for Complex Materials (MMCM5) III Minisymposium organized by Patrizia Trovalusci, Tomasz Sadowski, René de Borst and Bernhard Schrefler |
MS120C Room: Yasmin B Chair: Rene de Borst CoChair: Patrizia Trovalusci |
|
Coupled glide-climb diffusion-enhanced crystal plasticity (Keynote Lecture)
Computational methods and enhanced properties of composites with fractal multiscale microstructure
The use of statistical mechanics to explore the structure of the fully-coupled thermo-mechanical free-energy function
Ferroelectric thin film nano-generators
Application of Kubelka-Munk-Theory for modelling the thermal wave generation in infrared irradiated thermoplastic polymer matrix composites
A complete model for the analysis of thermoelastic behaviour in microbeams
|
|
|
23/7/2014
11:00 - 13:00 Phase-field Modeling and Simulation in Fluid Mechanics, Solid Mechanics and Life-sciences III Minisymposium organized by Hector Gomez, Kris van der Zee, Marino Arroyo, Irene Arias, Baskar Ganapathysubramanian, Thomas J.R. Hughes and John T. Oden |
MS143C Room: Yasmin C Chair: Kris Van Der Zee CoChair: Hector Gomez |
|
Diffuse interface models on graphs for classification of high dimensional data (Keynote Lecture)
Nonlocal diffuse interface models for two-phase fluids
A continuum framework for the treatment of mechano-chemically driven phase transformations with a group/subgroup character
Phase-field modeling of vesicle dynamics: adhesion and confinement effects
Stable time-scheme for quasi-incompressible two-phase diffuse-interface flows
|
|
|
23/7/2014
11:00 - 13:00 STS 03: Aero-acoustics in Aeronautics: Advanced Methods and Industrial Challenges |
STS03A Room: Auditorium Chair: Herman Deconinck |
|
Improvements in airframe noise prediction methods
Aerodynamic and aeroacoustic installation effects in environmental control systems
Lessons learnt from gap-turbulence case in FP7 Valiant project
Aeroacoustic modelling in support of low noise design – A manufacturer’s view
Efficient prediction of broadband airframe noise with stochastic sound sources: results of the Valiant airfoil test cases
|
|
|
23/7/2014
11:00 - 13:00 Advances in Accurate and Robust Numerical Methods for Computational Fluid Dynamics VI Minisymposium organized by Remi Abgrall, Feng Xiao and Koen Hillewaert |
MS051F Room: Sala A Chair: Koen Hillewaert CoChair: Goran Stipcich |
|
An Eulerian-Lagrangian WENO scheme for nonlinear conservation laws
A hybrid, explicit-implicit, second order in space and time TVD scheme for two-dimensional compressible flows
Accuracy improvement of compact type shock capture scheme with multi-step strategy for supersonic turbulent flow
A parallel agglomeration multigrid method for the acceleration of compressible flow computations on 3D hybrid unstructured grids
Adaptative Time Stepping and Schwarz Waveform Relaxation Method for Compressible Navier-Stokes Equations
A novel solver acceleration technique based on dynamic mode decomposition
|
|
|
23/7/2014
11:00 - 13:00 Computational Models for Soft Tissues III Minisymposium organized by Estefania Peña, Renato N. Jorge, Miguel A Martinez and Pedro S. Martins |
MS067C Room: Sala B1 Chair: Jorge Grasa |
|
Unstructured grid for soft tissues and bioimpedance models
Prediction of prostate motion and deformation using FE modeling for better biopsy accuracy
On the impact of geometry on global mechanical response of an isotropic hyperelastic fingertip model
Vestibular rehabilitation in vertiginous syndrome using smoothed-particle hydrodynamics method for fluid simulation
Soft tissue modelling for analysis of errors in breast reduction surgery
|
|
|
23/7/2014
11:00 - 13:00 Fluid-Structure Interaction Algorithms and Applications III Minisymposium organized by Jonathan Pitt and Scott Miller |
MS062C Room: Sala B2 Chair: Jonathan Pitt |
|
Fluid-structure interaction analysis of vibration phenomena and verification of its classification and prediction accuracy using modular network self-organizing map
Multi-Physics Coupling Method and Applications of Fluid-Structure Interaction on LNG Storage Tanks
Numerical analysis of flow-induced vibration of two circular cylinders in tandem at low Reynolds numbers
Resonance-like phenomena in submerged cylindrical shell systems subjected to multiple shock loads
The Comparison of the Experimental Result with the Numerical Analysis using the New Coupled Analysis Method based on the Enriched Free Mesh Method and the SUPG/PSPG Stabilized Finite Element Method
|
|
|
23/7/2014
11:00 - 13:00 Advanced Computational Techniques in Geophysical Sciences I Minisymposium organized by Hélène Barucq, Rabia Djellouli and Kersten Schmidt |
MS170A Room: Sala B3 Chair: Helene Barucq |
|
Numerically robust parallel sweeping preconditioners
Simulation of seismic waves in anisotropic media
Wave propagation in fractured poroelastic media
Cavity identification with piezoelectric sensors using iterated excitations and a topological sensitivity approach
Simulations of acoustic wave propagation with generalized multiscale Finite Element Methods
Large SVD computations for analysis of inverse problems in geophysics
|
|
|
23/7/2014
11:00 - 13:00 Advanced Models for Large-Eddy Simulation and Regularization of turbulent flows II Minisymposium organized by Roel Verstappen and Francesc Xavier Trias |
MS151B Room: Sala C1 Chair: Francesc Xavier Trias |
|
Constrained subgrid-scale modeling for large-eddy simulation of wall-bounded flows
On the eddy-diffusivity closure for turbulent natural convection
Towards Large-Eddy Simulation of complex flows in maritime applications
Numerical methods for the optimization of nonlinear residual-based subgrid-scale models using the Variational Germano Identity
New differential operators and discretization methods for large-eddy simulation and regularization modeling
|
|
|
23/7/2014
11:00 - 13:00 Frontier in Multi-physics CFD Simulation II Minisymposium organized by Nobuyuki Oshima, Makoto Yamamoto and Mamoru Tanahashi |
MS033B Room: Sala C2 Chair: Nobuyuki Oshima |
|
Numerical investigation on freezing process of super-cooled droplet
Numerical modeling of ceramics sintering and melting by microwave heating
Numerical investigation on droplet temperature of ice crystal accretion
Direct numerical simulation of premixed flame in a circular micro channel with detailed kinetic mechanism
Free surface flow past a circular cylinder under forced rotary oscillations
|
|
|
23/7/2014
11:00 - 13:00 Multidisciplinary Design Optimization In Computational Mechanics II Minisymposium organized by Piotr Breitkopf, Weihong Zhang and Rajan Filomeno Coelho |
MS031B Room: Sala C3 Chair: Piotr Breitkopf |
|
Biomimetic structural optimalization – Towards multiple load problems
Bird‘s-eye visualization of design-knowledge diversity for launch vehicle in view of fuels on hybrid rocket engine
Buckling behaviour of compressive plate with negative poisson´s ratio materials
High order orthogonal designs of experiments for metamodeling, identification and optimization of mechanical systems
Optimization design process for smart glove electronic product
Optimal tracking control of rotating multi-tethered formations in halo orbits
|
|
|
23/7/2014
11:00 - 13:00 Fast Direct Solvers: Applications to Boundary Element Methods and Other Linear Systems III Minisymposium organized by Stéphanie Chaillat-loseille, Eric Darve and Martin Schanz |
MS200C Room: Sala D1 Chair: Martin Schanz |
|
Boundary element methods with a HDIV scalar product for electromagnetic wave scattering problems
A Posteriori Error Control for BEM in 2D-Acoustics
Optimal preconditioning for the coupling of adaptive finite and boundary elements
A study on time domain BIEM with H-matrix
A directional fast multipole method for the Boundary Element Method and its application to elastodynamics
|
|
|
23/7/2014
11:00 - 13:00 Advances in Computational Structural Dynamics III Minisymposium organized by Evangelos J. Sapountzakis and Andreas E. Kampitsis |
MS018C Room: Sala D2 Chair: Alessandro Cattabiani |
|
Calculations of free vibration frequencies for thin microstructured plate bands by asymptotic-tolerance and tolerance models
A medium-frequency wide band analysis for shallow shell structures
The numerical algorithm and Ill-posedness research of a load identification method in time domain
Study on cushioning characteristics of hybrid airbag system
Dynamic analysis of moderately thick doubly curved shells via efficient 3D elements
Numerical study and design of extruded integrally stiffened panels (ISP) for aeronautic applications subjected to blast loading
|
|
|
23/7/2014
11:00 - 13:00 Biomechanics and Mechanobiology I Minisymposium organized by Guillermo Rus, Quentin Grimal and Elisa Budyn |
MS013A Room: Sala D3 Chair: Elisa Budyn CoChair: Juan Melchor |
|
In vivo stiffness evaluation of carotid artery by pulse wave analysis (Keynote Lecture)
Ultrasound-based multi-scale characterization of the elastic properties of ovine femoral cortical bone
Microscopic observations of human vetebral endplate
Automated assessment of anisotropic elasticity of hard tissue samples using resonant ultrasound spectroscopy with Bayesian analysis and Monte Carlo methods
Finite growth on biological tissues
Numerical modeling of hip implant vibrational behavior for the analysis of stability
|
|
|
23/7/2014
11:00 - 13:00 Advances with Adjoint CFD Solvers for Unsteady Flow III Minisymposium organized by Jens-Dominik Mueller, Carsten Othmer, Jacek Rokicki, Kyriakos Giannakoglou, Uwe Naumann, Marcus Meyer, Eugene de Villiers, Mustafa Megahed and Laurent Hascoet |
MS214C Room: Sala D4 Chair: to be confirmed |
|
Unsteady continuous adjoint method using POD for jet-based flow control
Performance considerations when using INTEL®XEON PHII™coprocessors for unsteady discrete adjoint calculations
On the usage of finite differences for the development of discrete linearised and adjoint CFD solvers
Node-based and CAD-based parametrisations for shape optimisation
Optimal control of turbulent jets using an unsteady adjoint solver
Equational differentiation of incompressible flow solvers
|
|
|
23/7/2014
11:00 - 13:00 Computational Damage Mechanics of Composite Materials I Minisymposium organized by Marco Alfano, Gilles Lubineau and Glaucio Paulino |
MS030A Room: Sala D5 Chair: Marco Alfano |
|
Nanoscale Modeling Of Composites Interface Using Computational Techniques
Time discretisation method involving fractional operators for hysteretic shear behaviour of fibre-reinforced composites modelling
Low intrusive coupling of implicit and explicit time integration schemes for structural dynamics: Application to low energy impacts on composite structures.
Thermo-electric simulation of ligthning strike on composite laminates
Objective simulation of failure by a synergetic usage of hybrid local/non-local continuum model
Identification of cohesive models using full field kinematic data: A variance based global sensitivity analysis
|
|
|
23/7/2014
11:00 - 13:00 Mechanics of Cellular Solids and Sandwich Structures I Minisymposium organized by Ashkan Vaziri, Dirk Mohr and Alireza Amirkhizi |
MS029A Room: Sala D6 Chair: Ashkan Vaziri |
|
Mechanical response of elastic open-cell foams under punching. Insights from experiments and simulations
Effect of interfacial strength on the response of sandwich plates with elastomeric cores
Modelling of closed-cell foams incorporating cell size and cell wall thickness variations
Numerical modelling of Nomex honeycomb cores for local analyses of sandwich panel joints
|
|
|
23/7/2014
11:00 - 13:00 Embedded Interface Methods II Minisymposium organized by John Dolbow, Isaac Harari and Adrian J. Lew |
MS066B Room: Sala E1 Chair: John Dolbow |
|
A fixed-grid Finite Element Method for moving interfaces applied to the development of biological tissues
A robust Nitsche’s formulation for interface problems with spline-based finite elements
Immersed Discontinuous Galerkin Methods for Interface Problems
Unfitted MHDG method for elliptic interface problems
Embedded solids of any dimensions in the extended finite element method
|
|
|
23/7/2014
11:00 - 13:00 Coarse grained simulations and turbulent mixing I Minisymposium organized by Fernando Grinstein |
MS248A Room: Sala E2 Chair: Fernando Grinstein |
|
On implicit Large Eddy Simulations of turbulent mixing
Combustion in afterburning behind explosive blasts
Hybrid Two-Level and Large-Eddy Simulations of High Reynolds Number Turbulent Wall-Bounded and Free Shear Flows
Improved 2D tO 3D simulation strategy for inertial confinement fusion capsules
|
|
|
23/7/2014
11:00 - 13:00 Advances in Constitutive Modelling of Metal Forming Processes across Different Lengthscales II Minisymposium organized by Ivaylo N. Vladimirov, Robertt A. F. Valente, Ricardo Alves de Sousa and Myoung-Gyu Lee |
MS065B Room: Sala E3 Chair: Ivaylo Vladimirov |
|
Dislocation density based plasticity model applied to metal forming
Evaluation of bake hardening behaviour of new CaO-added Al-Mg-Si alloys
Analytical and numerical prediction on flow stress of fibre metal laminate based on aluminium alloy and self-reinforced polypropylene
Numerical and experimental study on cold forging with cyclic symmetrical cross ball grooves using hardness control of high speed tool material
Prediction of hole-expansion formability of multi-phase steels using 3d microstructure-based modeling
|
|
|
23/7/2014
11:00 - 13:00 Recent Advances in Computational Fracture Mechanics I Minisymposium organized by Hiroshi Okada, Toru Ikeda, Chyanbin Hwu, Xiaosheng Gao and Toshio Nagashima |
MS225A Room: Sala E4 Chair: Toru Ikeda CoChair: Hiroshi Okada |
|
Crack propagation analysis using elastic-plastic FEM in torsional loading
Implementation and experimental validation of the Sendova-Walton theory for Mode-I Fracture
Simulation of 3D internal cracks formed in concrete around deformed tension bars using isotropic damage model
Prediction of fatigue crack growth of the contact wire in the railway catenary using XFEM simulation
Damage propagation analyses by XFEM using the Cohesive Zone Model
Singular stress analysis of sharp three-dimensional interfacial corner of jointed dissimilar materials using H-integral
|
|
|
23/7/2014
11:00 - 13:00 New Trends in Zigzag Theories for Multi-layered and Sandwich beams, Plates, and Shells II Minisymposium organized by Marco Di Sciuva, Alexander Tessler and Marco Gherlone |
MS224B Room: Sala E5 Chair: Marco Gherlone |
|
Viscoelastic response of higher laminate composite and sandwich plates (Keynote Lecture)
Coupled high-order layerwise laminate theory for cylindrical sandwich composite shells with piezoelectric actuators and sensors
An accurate quadrilateral laminated plate element accounting for the continuity conditions of interfacial transverse shear stresses
A four node doubly-curved shell element based on the Refined Zigzag Theory
A solid shell element with rotational degrees of freedom for sandwich analysis
Vibration modeling of viscoelastic sandwich structures using solid-shell finite elements.
|
|
|
23/7/2014
11:00 - 13:00 Reduced Order Models in Vibroacoustics I Minisymposium organized by Gerhard Müller, Jean-Francois Deü, Martin Buchschmid and Antoine Legay |
MS141A Room: Sala E6 Chair: Gerhard Müller CoChair: Jean-François Deü |
|
Model reduction method for the computation of a low frequency random vibro-acoustic response (Keynote Lecture)
Application of the PEDEM to the evaluation of radiated acoustic power
Sound radiation of light-weight slabs and modeling aspects for suspended ceilings
Review of reduction methods based on modal projection for highly damped structures
Discontinuous Galerkin Methods with plane waves for the Biot theory
Modal based reduction of structural-acoustic problems using XFEM
|
|
|
23/7/2014
11:00 - 13:00 Computational Contact Mechanics VI Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044F Room: Sala F Chair: Tod Laursen |
|
Contact enrichment technique for simulation of wear and complex interfaces
Modeling of abrasive wear as multiscale cohesive fracture
Mortar-based contact formulation with alternative cell partition for numerical integration
Efficient parallel solution methods for mortar finite element discretizations in computational contact mechanics
A localized version of mortar method for treatment of nonmatching interfaces: Algorithm description
A localized version of mortar method for treatment of nonmatching interfaces: Performance evaluation
|
|
|
23/7/2014
11:00 - 13:00 Computational Modeling of Fracture and Failure of Materials and Structures VI Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226F Room: Sala H 1 Chair: Ragnar Larsson |
|
Multi-scale crack propagation analysis for strengh assessment of polycrstaline materials
Stress- strain relationship for the confined concrete
Gradient Damage Models and Brittle Fracture
Micromechanical modeling of delamination with the thick level set model
A numerical approach to simulate ductile failure with mesh adaptivity within the finite strain framework
|
|
|
23/7/2014
11:00 - 13:00 Isogeometric Methods VI Minisymposium organized by Yuri Bazilevs, David J. Benson, Rene De Borst, Thomas J.R. Hughes, Trond Kvamsdal, Alessandro Reali, Michael A. Scott and Clemens V. Verhoosel |
MS049F Room: Sala H 2 Chair: Clemens Verhoosel |
|
Isogeometric spline forests (Keynote Lecture)
Edge graph based volume segmentation for isogeometric analysis
Volumetric NURBS Parameterization from CAD Boundary Representations for Isogeometric Analysis
Isogeometric analysis and subdivision surfaces
Isogeometric analysis for domains with corners
B++ splines and isogeometric analysis
|
|
|
23/7/2014
11:00 - 13:00 Multiscale Computational Homogenization for Bridging Scales in the Mechanics and Physics of Complex Materials VI Minisymposium organized by Julien Yvonnet, Kenjiro Terada, Peter Wriggers and Marc Geers |
MS012F Room: Sala H 3 Chair: Maenghyo Cho CoChair: Fabrice Detrez |
|
A study on lattice rotation of polycrystalline FCC metals using homogenization-based approach
Influence of Inclusion Morphology on Effective Behaviour of Elastoplastic Matrix-Inclusion Materials
Some numerical aspects of finite element models for polycrystalline homogenization
An electroneutral computational homogenization formulation for Li-ion battery cells
Grain cluster method for multiscale simulations of multiphase steels
Preliminary numerical analysis relevant to an electroneutral computational homogenization formulation for Li-ion battery cells
|
|
|
23/7/2014
11:00 - 13:00 Computational Biomechanics VI Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007F Room: Sala J Chair: Jose F Rodriguez CoChair: Sebastian Skatulla |
|
Finite element modelling of biaxial tension tests of soft tissues with clamps and hooks (Keynote Lecture)
Computational modeling of muscle contracture
The role of water in tendon biomechanics.
Ogden parameter optimization for finite element modelling of cervical ligaments using hybrid formulation
Experimental and numerical study on the elastic-viscoplastic behavior of facial soft tissues
|
|
|
23/7/2014
11:00 - 13:00 Railway and Road Noise and Vibrations - Modeling of Propagation and Mitigation I Minisymposium organized by Paulo Amado-Mendes, Luís Godinho, Salvador Ivorra and Jaime Ramis |
MS258A Room: Business Centre I Chair: Paulo Amado-Mendes CoChair: Luis Godinho |
|
A procedure for the top geometry optimization of thin acoustic barriers
An explicit integration finite element method for impact noise generation due to wheel flat
3D FE Modelling of Wheel-Rail Frictional Rolling Contact in ElastoPlasticity for Investigation on Short Pitch Corrugation
2.5d modeling of soil-structure interaction using a coupled MFS-FEM formulation
Prediction of railway induced vibrations in an urban environment
Simplified model for structural vibration of a viaduct due to railway traffic
|
|
|
23/7/2014
11:00 - 13:00 Automation of Computational Modeling by Advanced Software Tools and Techniques I Minisymposium organized by Joze Korelc, Garth Nathan Wells, Dominique Eyheramendy , Anders Logg and Hugo Leclerc |
MS107A Room: Business Centre II Chair: Joze Korelc |
|
A dynamic approach for automating finite element code development
Interactive debugging of automatically generated numerical codes
Freedyn – A Multibody simulation research code
Firedrake, a toolchain for performance-portable automated finite element simulation
Stela: How a performance dedicated language can help to automate the development of solvers and field manipulators
|
|
|
23/7/2014
11:00 - 13:00 Innovative Numerical Approaches for Multi-physics Problems II Minisymposium organized by Anna Pandolfi, Laurent Stainier and Kerstin Weinberg |
MS129B Room: Sala de prensa I Chair: Kerstin Weinberg |
|
Multi-physics multi-scale models for retinal blood flow and its relation to glaucoma
Mathematical modeling of retinal circulation: Fundamental mechanisms and impact on retinal diseases
On the thermo-visco-hyperelasticity of electro-active biological tissues
A two-fluid computational model to study magnetic reconnection in reactive plasmas under chromospheric conditions
Phase-field modeling of hydraulic fracture in poro-elastic solids at large strains
A coupled fluid/solid approach for the numerical simulation of welding
|
|
|
23/7/2014
11:00 - 13:00 Microstructural Based Constitutive Models in Hard and Soft Matter Materials II Minisymposium organized by Christian Miehe, Samuel Forest and Christian Linder |
MS140B Room: Sala de prensa II Chair: Christian Miehe CoChair: Christian Linder |
|
The macroscopic response, microstructure evolution and macroscopic stability of short fiber-reinforced elastomers at finite strains (Keynote Lecture)
Magnetorheological elastomers: Experiments and modeling
Two-scale computational homogenization of electroactive polymer composites at finite strains
Variational-based computational homogenization of electro-magneto-active polymer composites at large strains
|
|
|
23/7/2014
11:00 - 13:00 Chemical Degradation Processes in Concrete Materials Minisymposium organized by Carmelo E. Majorana and Kaspar J. Willam |
MS453A Room: Sala de Reservas Chair: Carmelo Majorana |
|
Structural analysis of frost damaged constructions by means of a coupled environmental-mechanical damage model
Mesoscale modelling of concrete material with polypropylene fibres inclusion under high temperature
Numerical modeling of the corrosion effects on reinforced concrete beams
Multiscale Evaluation of Concrete Degradation due to Alkali Silica Reaction
Numerical Simulation of Non-Uniform Corrosion States in Rebars under Natural Chloride Environment
|
|
|
13:00 - 14:00 Lunch Time |
|
|
14:00 - 16:00 TECHNICAL SESSIONS |
|
|
23/7/2014
14:00 - 16:00 Advances in Numerical Methods for Linear and Non-linear Dynamics III Minisymposium organized by Alexander Idesman and Gregory Hulbert |
MS087C Room: Mare Nostrum A Chair: Gregory Hulbert CoChair: Alexander Idesman |
|
A new class of exact analytical solutions for elastodynamic impact
BEM approach of time-harmonic problem for porouse soil-structure interaction with intermediate layer
Modifying resonance modes of dissipative structures using magnitude and phase information
High performance algorithms for the modal linear dynamic analysis in the frequency domain
The Caughley Absorbing Layer Method – Implementation and validation in Ansys software
|
|
|
23/7/2014
14:00 - 16:00 Advances in Shape and Topology Optimization of Structures and Materials III Minisymposium organized by Michael Wang, Zhen Luo and Takayuki Yamada |
MS494C Room: Mare Nostrum B Chair: Takayuki Yamada CoChair: James Guest |
|
New manufacturing constraint capabilities in projection-based topology optimization (Keynote Lecture)
A manufacturability-based method of topological shape optimization for structures under multiple loading cases
A new level set based method for topology optimization
Shape optimization of shear panel damper under cyclic elasto-plastic behavior
Isogeometric shape optimization of trimmed shell structures
A non-parametric free-form optimization of shell structures for reducing radiated noise
|
|
|
23/7/2014
14:00 - 16:00 Discontinuous Galerkin Methods: New Trends and Applications II Minisymposium organized by Bernardo Cockburn, Sonia Fernandez-Mendez, Nicoletta Franchina, Ngoc-Cuong Nguyen, Jaime Peraire and Per-Olof Persson |
MS139B Room: Mare Nostrum C Chair: Jaume Peraire |
|
A high-order implicit-explicit Discontinuous Galerkin scheme for fluid-structure interaction
Relaxing the CFL number of the discontinuous Galerkin method
Investigation of high-order temporal schemes for the Discontinuous Galerkin solution of the Navier-Stokes equations
Multigrid algorithms for hp-Discontinuous Galerkin discretizations of elliptic problems
Staggered Discontinuous Galerkin method and FETI-DP preconditioners for the Stokes system
Spectral and high order DGFEM for time-domain electrodynamics in inhomogeneous material
|
|
|
23/7/2014
14:00 - 16:00 Computational Fluid Dynamics for Free and Moving Boundaries III Minisymposium organized by Rekha R. Rao, David R. Noble, Scott A. Roberts and Elie Hachem |
MS256C Room: Mare Nostrum D Chair: Jonathan Clausen CoChair: ELIE HACHEM |
|
Unstructured 3D numerical modeling of the melting of a PCM contained in a spherical capsule (Keynote Lecture)
Phase field-lattice Boltzmann simulations of liquid-solid two-phase flows
Numerical analysis of liquid film evaporation in micro cavities
Computational and analytical solution of non-Local Stefan melting problems
Improving mass conservation in a stabilized level-set approach for high-density-ratio flows
A multiple marker level-set method for simulation of bubbly flows
|
|
|
23/7/2014
14:00 - 16:00 Uncertainty Modeling and High Performance Stochastic Methods for Computationally Intensive Calibrations, Predictions and Optimizations III Minisymposium organized by Tan Bui-Thanh, Thomas Carraro, Marko Laine and Ernesto E. Prudencio |
MS184C Room: Mare Nostrum E Chair: Ernesto Prudencio |
|
Bayesian uncertainty quantification and propagation using adjoint techniques
Optimal control of two age structured malaria model with model parameter uncertainty
Concurrent tolerance allocation in mechanical assemblies by desing under uncertainty methods
Uncertainty quantification and calibration of physical models
Multilevel estimation of rare events
Nested sampling for calibration and prior model selection of subsurface flow models
|
|
|
23/7/2014
14:00 - 16:00 Current Challenges in Cohesive-zone Models III Minisymposium organized by Albert Turon, Giulio Alfano and Bent F. Sørensen |
MS196C Room: Mare Nostrum F Chair: Albert Turon |
|
Cohesive zone modelling of wrinkle defects in glass-epoxy laminates using user finite element feature
Extracting rate dependent traction separation relations for cracks/interfaces in viscoelastic media
Continuum cohesive failure/interface failure interaction in adhesively bonded double-lap joint specimens
Virtual determination of cohesive zone parameters for adhesive joints using a homogenization approach
Gradient of damage enhancement for a cohesive model
Crack formation and development in reinforced-concrete embedded-discontinuity beam finite elements
|
|
|
23/7/2014
14:00 - 16:00 Multiscale Analysis and Design Under Uncertainty II Minisymposium organized by George Stefanou, Vissarion Papadopoulos, X. Frank Xu and Manolis Papadrakakis |
MS269B Room: Llevant Chair: George Stefanou CoChair: Vissarion Papadopoulos |
|
The effect of random material properties on the probabilistic behavior of functionally graded plates (Keynote Lecture)
Influence of the spatial correlation structure of an elastic random medium on its scattering properties
Multi-scale elasticity identification using modified constitutive relation error
A VRF-based sparse SSFEM of non-Gaussian stochastic fields
Robust design with variability response functions
Effect of uncertainty on prediction of tool life for milling ultrahigh strength steel
|
|
|
23/7/2014
14:00 - 16:00 Advanced Discretization and Solution Methods for Coupled Multiphysics Transport Phenomena I Minisymposium organized by John Shadid and Dmitri Kuzmin |
MS115A Room: Mestral Chair: John Shadid CoChair: Dmitri Kuzmin |
|
Asymptotic-preserving semi-Lagrangian Discontinuous Galerkin schemes for a class of relaxation systems (Keynote Lecture)
Fast hierarchical solvers for Discontinuous Galerkin methods
Improved accuracy of high-order WENO finite volume methods on Cartesian grids
Monotonicity in high-order curvilinear finite element field remap
Regularizing nonlinear systems with discontinuous solutions in higher order methods
Algebraic linearity preserving limiters for compressible flow problems
|
|
|
23/7/2014
14:00 - 16:00 Industrial Applications of Computational Fluid Dynamics and Related Techniques VII |
CS658G Room: Ponent 1 Chair: Ignasi Colominas |
|
Numerical Investigation of Electrically Excited RTI Using ISPH Method
Steady rise of a deformable bubble in an elasto-viscoplastic fluid
Parallel computing of icing on three-dimensional airfoils
Direct Monte Carlo simulation of a rarefied ionized flow about a reentry vehicle
Modelling squeeze flow of viscous polymer melts
Computer modelling of operation of the conductive MHD centrifugal pump
|
|
|
23/7/2014
14:00 - 16:00 Industrial Applications of Computational Solid Mechanics and Related Techniques II |
CS659B Room: Ponent 2 Chair: Antonio Rodriguez-Ferran |
|
BLC derivation of a stuffed whipple shield based on numerical simulations
Computational modelling of thin film Runoff and evaporation on surfaces
Friction model in equal channel angular extrusion subjected to back pressure
Shape optimization with Gene algorithm in the design of stretchable electronics
A novel Rotary Magnetorheological Fluid Damper for wearable rehabilitation robot
Identification of low-contrast inclusions in poroelastic materials
|
|
|
23/7/2014
14:00 - 16:00 Mesh Generation and Adaption III Minisymposium organized by Josep Sarrate, Franck Ledoux and Rafael Montenegro |
MS198C Room: Terral Chair: Rafael Montenegro Armas |
|
A 2D topology-adaptive mesh deformation framework for extremely large boundary deformations
Improved Poisson-disk sampling for meshing applications
Surface mesh smoothing and improvement strategies for free-form shapes in industrial and academic applications
Volume conservation of 3D surface triangular mesh smoothing
Graph grammar for construction of elimination trees for fast solution of H adapted meshes
The analysis of the efficiency of an adaptation method based on the grid generator
|
|
|
23/7/2014
14:00 - 16:00 Smart Structures - Modelling and Simulation II Minisymposium organized by Ruediger Schmidt |
MS086B Room: Tramuntana 1 Chair: ZHIGANG LIU |
|
Numerical simulation of large deformation kinetics for polymeric (Keynote Lecture)
The investigation of non-contact active control using photostrictive actuators
Development of a cohesive model for damage simulation in ferroelectric materials subjected to electromechanical loading
Investigation of the poling process in multiferroic composites via FEM simulation
A nonlinear viscoelastic model for electroactive inflated membranes
|
|
|
23/7/2014
14:00 - 16:00 Advanced Numerical Methods I |
CS656A Room: Tramuntana 2 Chair: Manuel Casteleiro |
|
A dissipation-based state update algorithm for isotropic elasto-plastic hardening materials
Computational assessment of reduction methods IN FE-based frequency-response analysis
Aeroelastic analysis of spherical shells
Numerical algorithms for plasticity models with nonlinear kinematic hardening
Stress formulation of complex variable boundary integral equation for solving torsion problems
Nonlinear Kirchhoff-love shells: Theory and numerical assessment using tuba finite elements
|
|
|
23/7/2014
14:00 - 16:00 Methods of Approximate Static Analyses of Complex Structural Systems I Minisymposium organized by Janusz Rębielak |
MS252A Room: Xaloc Chair: Janusz Rębielak |
|
Reinforced concrete shear wall: structural element - finite element
The numerical collapse analysis of tensegrity structures
Practical static calculation method for estimating elasto-plastic dynamic responses of space frames
Hybrid design methods for complex systems in architecture & structural engineering
New method of approximate calculations of statically indeterminate trusses
Aspects of the boundary element formulation of isotropic shallow shells using radial integration method
|
|
|
23/7/2014
14:00 - 16:00 Finite Element Methods and High-Performance Computing for Environmental Fluid Mechanics I Minisymposium organized by Ethan Kubatko and Kazuo Kashiyama |
MS152A Room: Salon Club Chair: Ethan Kubatko |
|
Efficient spatial and time discretizations for environmental fluid mechanics (Keynote Lecture)
A coupling method of free surface flow using FEM for Boussinesq equations and Navier-Stokes equations
Advances in discontinuous-Galerkin based spectral wave modeling
Automated solution of partial differential equations on prism cells, within firedrake
A high-order, three-dimensional, Discontinuous Galerkin (DG) coastal ocean circulation and transport model
Modeling and Simulation of Tsunami Waves Using Virtual Reality
|
|
|
23/7/2014
14:00 - 16:00 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon VII Minisymposium organized by Christian Soize |
MS009G Room: Yasmin A Chair: Marc Mignolet CoChair: Christian Soize |
|
Recent advances in mass matrix templates for structural dynamics (Keynote Lecture)
A scalable parallel symmetric eigenvalue problem solver: TraceMIN
Impulse based substructuring as paradigm for coupled analysis of dynamic components
Finite deformation beams for problems of interaction
Assessment of boundary conditions for dynamic analysis
Selection algorithm for bilinear modes
|
|
|
23/7/2014
14:00 - 16:00 Multiscale and Multiphysics Modelling for Complex Materials (MMCM5) IV Minisymposium organized by Patrizia Trovalusci, Tomasz Sadowski, René de Borst and Bernhard Schrefler |
MS120D Room: Yasmin B Chair: Patrizia Trovalusci CoChair: Bernhard Schrefler |
|
Multiscale modelling of fatigue crack initiation and propagation in metal single and polycrystals (Keynote Lecture)
A multifield continuum model for microporous ceramic matrix composites
Discrete and continuous models for the in plane modal analysis of masonry structures
Phase-Field Approach for Description of the Packaging Behavior in Metallic Closed-Cell Foams
Constitutive framework for modeling incipient spall damage in FCC metals using microstructurally explicit 3D finite elements
Fractional hereditariness of Lipid Membranes
|
|
|
23/7/2014
14:00 - 16:00 Phase-field Modeling and Simulation in Fluid Mechanics, Solid Mechanics and Life-sciences IV Minisymposium organized by Hector Gomez, Kris van der Zee, Marino Arroyo, Irene Arias, Baskar Ganapathysubramanian, Thomas J.R. Hughes and John T. Oden |
MS143D Room: Yasmin C Chair: Marino Arroyo CoChair: Hector Gomez |
|
Extreme large-scale multi-phase-field simulation of polycrystalline grain growth using TSUBAME2.5 GPU-supercomputer
A quantitative free energy functional for phase field modeling
2D and 3D Phase-Field Simulations of Competitive Dendrite Growth During Directional solidification of Binary Alloy
Energy-stable time discretizations for the phase-field crystal equation
|
|
|
23/7/2014
14:00 - 16:00 STS 04: Optimization |
STS04A Room: Auditorium Chair: Jacques Periaux |
|
Adaptive surrogate modelling for global optimization
Multidisciplinary optimization of turbomachinery components using differential evolution
Hybridized evolutionary optimization with game strategies for multidisciplinary design applied to aeronautics
Adjoint wall functions - Validation and application to vehicle aerodynamics
|
|
|
23/7/2014
14:00 - 16:00 Advanced Materials: Computational Analysis of Properties and Performance I Minisymposium organized by Vadim Silberschmidt and Valery Matveenko |
MS006A Room: Sala A Chair: Valery P. Matveenko CoChair: Vadim V. Silberschmidt |
|
Stochastic virtual tests for fiber composites (Keynote Lecture)
A novell approach for modelling composites with a variable-axial fibre design
Probabilistic description of stochastic processes of structural failure in advanced polydisperse composites
Numerical modelling of plate heat exchanger gasket
Optimization of geometry of adhesive joints
Integrating Modeling and Silk-Like Protein Design to Mimic Biological Fiber Spinning
|
|
|
23/7/2014
14:00 - 16:00 Transition Modeling and Prediction in CFD Solvers with Focus on Practical Applications I Minisymposium organized by Andreas Krumbein, Cornelia Grabe, Jean Perraud and Hugues Deniau |
MS147A Room: Sala B1 Chair: Andreas Krumbein CoChair: Jean Perraud |
|
Overview of transition prediction tools in elsA software
Automatic prediction of laminar/turbulent transition in an unstructured finite element Navier-Stokes solver.
Transition prediction and implementation in RANS solvers
Assessment of laminar-turbulent transition modelling for rotating wing applications
Flutter prediction in the transonic flight regime with the γ-REθ transition model
Plate cooling design by means of CFD analysis
|
|
|
23/7/2014
14:00 - 16:00 Modeling of Fiber-based Structures - Textiles and Textile Reinforced Composites I Minisymposium organized by Yordan Kyosev, Philippe Boisse and Damien Durville |
MS014A Room: Sala B2 Chair: Yordan Kyosev |
|
Mechanical model and discretization of thermoplastic composite materials at forming temperatures
Woven polymer matrix composites: characterization and modelling of damage at the mesoscale
Finite element simulation of the mechanical behaviour of wire ropes, comparison with analytical models and experimental tests
Quasi-static micro-mechanical representative volume element modeling of dry fiber bundles
A new RVE generation procedure for Extended Finite Element simulations of textile-reinforced composites
A meshing technique dedicated to complex woven composite structures
|
|
|
23/7/2014
14:00 - 16:00 Advanced Computational Techniques in Geophysical Sciences II Minisymposium organized by Hélène Barucq, Rabia Djellouli and Kersten Schmidt |
MS170B Room: Sala B3 Chair: Helene Barucq |
|
Full Waveform Inversion in Migration Based Travel Time formulation
Absorbing boundary conditions for tilted transverse isotropic elastic media
Helmholtz equation in highly heterogeneous media
Full waveform inversion in time-domain for geophysical applications
Imaging of complex media with elastic wave equations
Coupling of Discontinuous Galerkin and Finite Differences methods for simulation seismic waves
|
|
|
23/7/2014
14:00 - 16:00 Numerical Analysis and Design for Advanced Engineering Solutions I Minisymposium organized by Wolfgang Graf, Edoardo Patelli, André T. Beck, Michael Beer and Héctor A. Jensen |
MS055A Room: Sala C1 Chair: Wolfgang Graf CoChair: Takashi Hara |
|
Analysis of the geometrical parameters of thermal components in a Stirling engine
An integrated analysis of EV electric motor system: Electromagnetic, vibration and thermal analysis
Fatigue analysis of structure of gondola car body based on rigid-flexible coupling multi-body systems
Jacket substructure fatigue mitigation through active control
Reliability-based design with using numerical analysis
Intelligent engineering with uncertain data.
|
|
|
23/7/2014
14:00 - 16:00 Inverse Problems, Design and Optimization I Minisymposium organized by Marcelo Colaço, Helcio Orlande, George Dulikravich and Ireneusz Szczygiel |
MS024A Room: Sala C2 Chair: Marcelo Colaço |
|
State estimation problem for the detection of a shutdown valve closure in gas pipelines with multiple valves
A comparison of particle filters applied to the heat transfer coefficient estimation in internal combustion engines
Determining of the neonatal thermal model parameters using inverse thermal analysis
DNS-Based optimal control of separated flow over a half circular cylinder
A two step process for shape optimization in computational fluid dynamics
Variational Bayesian formulations with sparsity-enforcing priors for model calibration
|
|
|
23/7/2014
14:00 - 16:00 Nonlinear Computational Stability Analysis I Minisymposium organized by Herbert Mang and Yeong-Bin Yang |
MS236A Room: Sala C3 Chair: Herbert Mang |
|
Numerical solution of linear eigenproblems containing derivatives of the tangent stiffness matrix with respect to the load parameter (Keynote Lecture)
Koiter asymptotic analysis in technical applications
Numerical approach for visualization of the buckling sphere by means of resolving the consistently linearized eigenproblem
Buckling behaviour of friction stir welded stiffened aluminium panels
The buckling sphere - A symbiosis of mechanics of solids and spherical geometry
Nonlinear analysis of hybrid steel-concrete beam with interlayer slips
|
|
|
23/7/2014
14:00 - 16:00 Computational Geomechanics I Minisymposium organized by Kristian Krabbenhoft, Scott Sloan, Dorival Pedroso and Jose Andrade |
MS019A Room: Sala D1 Chair: Jose Andrade |
|
Application of adaptive dynamic relaxation to highly nonlinear geotechnical problems
A hierarchical mutlscale approach for granular media
Coupled u-w models implemented in meshfree numerical schemes: Application to seepage problems through earth dams
Model test and seepage analysis on clayey ground confining sand layers
Development of THM coupled numerical simulator for methane hydrate bearing sediment
Numerical modelling on vibroflotation soil improvement techniques, using several constitutive laws
|
|
|
23/7/2014
14:00 - 16:00 Computational Modelling of Material Forming Processes I Minisymposium organized by Carlos Agelet de Saracibar and Robertt Valente |
MS023A Room: Sala D2 Chair: Carlos Agelet de Saracibar CoChair: Robertt Valente |
|
Coupled thermo-mechanical finite element technology for stress accurate analysis (Keynote Lecture)
3D Numerical simulation of Friction Stir Welding processes with non-cylindrical pin: comparison of a fluid and a solid approach
Prediction of residual stresses in FSW process
A meshing and remeshing framework using implicit geometries for the simulation of rotary friction welding
Finite element simulation of the hot forging operation in manufacturing of bearing rings with special emphasis on manufacturing speed
An enthalpy based heat equation to solve the phase change
|
|
|
23/7/2014
14:00 - 16:00 Biomechanics and Mechanobiology II Minisymposium organized by Guillermo Rus, Quentin Grimal and Elisa Budyn |
MS013B Room: Sala D3 Chair: Quentin Grimal CoChair: Juan Melchor |
|
A composition-based intervertebral disc model to study the effects of extracellular matrix degenerative changes on nutrition (Keynote Lecture)
Cartesian grid FEM for direct creation of patient specific models and implant simulation
Characterization and Computational Modeling of Anterior Cruciate Ligament Biomechanics
Failure of silicone gel breast implants – Mechanical tests on a mammary implant in its implantable state to determine the shell integrity
Numerical simulation of the influence on interstitial fluid flow and ion transport of the viscous mechanical behaviour of human skin in vivo
Scaffold geometry influences the mechanical properties of tissue engineered cartilage
|
|
|
23/7/2014
14:00 - 16:00 Explicit and Implicit Large Eddy Simulation of Turbulent Flows I Minisymposium organized by Joanna Szmelter and Piotr K Smolarkiewicz |
MS084A Room: Sala D4 Chair: Joanna Szmelter |
|
A consistent ILES framework for all-scale atmospheric dynamics (Keynote Lecture)
Increasing horizontal resolution in global NWP and climate simulations - Illusion or panacea?
A stochastic closure approach for Large Eddy Simulation
Implicit Large Eddy Simulation using Second and Higher-Order Methods on Unstructured Meshes
Large-Eddy simulation of a turbine stage with rim cavity
|
|
|
23/7/2014
14:00 - 16:00 Advances in the Modelling and Simulation of Oil Drilling Operations I Minisymposium organized by Pere-Andreu Ubach and Raju Gandikota |
MS272A Room: Sala D5 Chair: Pere-Andreu Ubach de Fuentes CoChair: Raju Gandikota |
|
A parallel FEM-DEM approach for analysis of cuttings transport in wellbores
FEA as a prediction tool for bottomhole assembly design: Mitigating dangerous vibrations
A parallelized discrete element method for analysis of drill-bit mechanics problems in hard and soft soils
About influence of environment on strains of boring columns
A nonlinear finite element for simulation of dynamics of beam structures using multibody system approach
Use of multibody system approach for torque and drag analysis of long drill strings
|
|
|
23/7/2014
14:00 - 16:00 Mechanics of Cellular Solids and Sandwich Structures II Minisymposium organized by Ashkan Vaziri, Dirk Mohr and Alireza Amirkhizi |
MS029B Room: Sala D6 Chair: Ashkan Vaziri |
|
Nonlinear elastic and plastic response of chiral, anti-chiral and hierarchical periodic structures
Local stress distribution in honeycomb sandwich structure finite element models
Modeling high velocity fractures in cellular materials
Finite element technology for steel-elastomer-sandwiches
|
|
|
23/7/2014
14:00 - 16:00 Modelling of Damage in Heterogeneous Microstructures I Minisymposium organized by Ingo Scheider and Siegfried Schmauder |
MS168A Room: Sala E1 Chair: Ingo Scheider |
|
Characterisation of cohesive zone models by micromechanical experiments
The role of the microstructural morphology of a multi-phase material on the onset of (ductile) failure identified
Multiscale modelling of damage and failure in a biological hierarchical material.
Hierarchical composites with secondary nanoplatelet reinforcement: 3D computational fatigue studies
Evaluation of ductile fracture in ferrite-pearlite steels by the ellipsoidal void model
Creep deformation and damage in a polycrystalline Copper-Antimony-Alloy
|
|
|
23/7/2014
14:00 - 16:00 Second Generation of Theory of Structures by Unified Formulation I Minisymposium organized by Erasmo Carrera, Antonio J.M. Ferreira, Maria Cinefra, Marco Petrolo, Alfonso Pagani and Enrico Zappino |
MS263A Room: Sala E2 Chair: Marco Petrolo CoChair: Alfonso Pagani |
|
Delamination modeling in shells by means CUF finite elements (Keynote Lecture)
Structural analysis of launcher structures by means of Refined Beam Models
Free vibration analysis of rotating structures by Carrera Unified Formulation
Axiomatic/asymptotic analysis of refined models for thermal stress analysis of plates
Analysis of laminated box beams using 1D Carrera Unified Formulation
|
|
|
23/7/2014
14:00 - 16:00 Advances in Multiscale Flow Modelling: Methods and Applications I Minisymposium organized by Vasily Goloviznin, Sergey Karabasov, Victor Kopiev, Tatiana Kozubskaya, Maria Lukacova, Jens-Dominik Mueller, Dmitry Nerukh and Yuri Vassilevski |
MS207A Room: Sala E3 Chair: Sergey Karabasov |
|
Mathematical modeling of Newtonian and viscoplastic free surface flows using dynamic octree meshes (Keynote Lecture)
Multiresolution analysis of incompressible flows interaction with forced deformable bodies
Effective boundary conditions for compressible flows over a rough surface
CABARET method coupled with acoustic modelling for jet-wing-flap interaction problem
A hybrid continuum-particle solver for unsteady locally rarefied gas flows implemented in OpenFOAM
Further insights into VMS a posteriori error estimation and error pollution
|
|
|
23/7/2014
14:00 - 16:00 Recent Advances in Computational Fracture Mechanics II Minisymposium organized by Hiroshi Okada, Toru Ikeda, Chyanbin Hwu, Xiaosheng Gao and Toshio Nagashima |
MS225B Room: Sala E4 Chair: Toru Ikeda CoChair: Hiroshi Okada |
|
Fatigue crack propagation and their interaction modelling with a peridynamics approach
Peridynamics with adaptive grid refinement
Analysis of cracked model under finite-strain elastoplasticity using partitioned coupling method
Stress intensity factor evaluation for three-dimensional crack with minimal meshing effort
Vibro-acoustic wave interaction in cracked plate modeled with peridynamics
|
|
|
23/7/2014
14:00 - 16:00 Uncertainty Quantification Techniques for Fluid-flow Problems I Minisymposium organized by Remi Abgrall, Pietro Marco Congedo and Gianluca Iaccarino |
MS203A Room: Sala E5 Chair: Pietro Marco Congedo |
|
A new framework for stochastic analysis in large scale simulations based on goal-oriented probability density function methods (Keynote Lecture)
Goal-based adaptive coupling stochastic and deterministic errors in compressible CFD
On the use of high-order statistics in robust design optimization
A hybrid uncertainty quantification method for robust optimization
Modeling with Fuzzy Logic the dynamic of people flow during the evacuation of constructed environments dimensioned according to the brazilian legislation
|
|
|
23/7/2014
14:00 - 16:00 Reduced Order Models in Vibroacoustics II Minisymposium organized by Gerhard Müller, Jean-Francois Deü, Martin Buchschmid and Antoine Legay |
MS141B Room: Sala E6 Chair: Martin Buchschmid CoChair: Antoine Legay |
|
Numerical and experimental evaluation of mechanical mobility in multi-point-connected structures for power transmission prediction
A new approach for modal synthesis of a vibroacoustic problem
Usage of reduced numerical models in the design process of a shunted piezoelectric isolator
ROM for elastodynamics including viscoelastic behaviors. From material Identification to part design
Energy flow and hybrid methods applied to double walls
|
|
|
23/7/2014
14:00 - 16:00 Computational Contact Mechanics VII Minisymposium organized by Tod Laursen, Peter Wriggers and Giorgio Zavarise |
MS044G Room: Sala F Chair: Yves Renard |
|
A solid beam element for wire rope simulation with a special contact algorithm
Contact formulations considering rotational degrees of freedom of structural elements
Contact with friction between 3-D beams with deformable circular cross section
Frictional multiple-point beam-to-beam contact finite element
Beam-to-beam contact with rotational friction/adhesion
Various variational formulations for curve and surface interactions
|
|
|
23/7/2014
14:00 - 16:00 Computational Modeling of Fracture and Failure of Materials and Structures VII Minisymposium organized by Olivier Allix, Milan Jirásek, Nicolas Moës and Xavier Oliver |
MS226G Room: Sala H 1 Chair: Bert Sluys |
|
Fracture modeling of composite laminates based on phase field damage evolution in shell kinematics
Meshing strategies for the alleviation of mesh-induced effects in cohesive element models
A discontinuity tracking algorithm based on assumed enhanced modes
Three-dimensional fracture analysis with the scaled boundary finite element method using octree mesh
Nonlinear analysis of R/C shear walls subjected to cyclic loadings
Encompassing incompressibility and strain localization in plasticity with mixed FE
|
|
|
23/7/2014
14:00 - 16:00 Reduced Basis, POD and PGD Model Reduction Techniques I Minisymposium organized by Francisco Chinesta, Elias Cueto, Pierre Ladevèze and Hermann Matthies |
MS015A Room: Sala H 2 Chair: Pierre Ladevèze CoChair: Francisco Chinesta |
|
A space-time PGD approach for 3D nonlinear parametrized problems (Keynote Lecture)
A fully-separated PGD algorithm for nonlinear problems
PGD-Virtual Charts for structural design
A simple adaptive procedure for separated representations in engineering applications
An approximation framework dedicated to PGD-based nonlinear solver
Goal-oriented low-rank tensor approximation for high dimensional stochastic problems
|
|
|
23/7/2014
14:00 - 16:00 Meshless Methods and Particle Methods Advances in Biomechanics I Minisymposium organized by Jorge Belinha, Renato M. Natal Jorge and Ken-ichi Tsubota |
MS025A Room: Sala H 3 Chair: Jorge Belinha |
|
Open boundary conditions without buffer zone for incompressible Smoothed Particle Hydrodynamics
Computer simulation of thrombus formation in single ventricle using particle method
Elasto-plastic analysis of the bone tissue using a meshless method
The bone tissue remodelling analysis due to the insertion of a femoral stem using a meshless method
Human swallowing simulation by the Hamiltonian MPS method
A meshless approach based on the cell method for bone biomechanics
|
|
|
23/7/2014
14:00 - 16:00 Computational Biomechanics VII Minisymposium organized by T.Christian Gasser, Miguel Cerrolaza, Ellen Kuhl, Michael Gee, Yomar Gonzalez, Simone Deparis and Thomas Franz |
MS007G Room: Sala J Chair: Jiri Bursa CoChair: Mikael Mortensen |
|
Myocardial tissue mechanics with fibres modelled as one-dimensional Cosserat continua (Keynote Lecture)
The effect of white matter anisotropy on cortical folding during development
Quantitative diagnostics of prostate cancer using dynamic palpation
A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
Biomechanics of Gastroparesis
|
|
|
23/7/2014
14:00 - 16:00 Micromechanics of Defects in Solids Minisymposium organized by Pilar Ariza and Michael Ortiz |
MS221A Room: Business Centre I Chair: Pilar Ariza CoChair: Michael Ortiz |
|
Study of structured grain boundaries in graphene using a tight binding based model
Effects of carbon interstitials on the Peierls stress in Fe using atomistic-continuum coupling
Assessment of phase field crystal concepts using long-time molecular dynamics
Atomistic modeling and simulation of long-term transport phenomena in nanomaterials
|
|
|
23/7/2014
14:00 - 16:00 Methods and Models for FSI in Engineering Problems I Minisymposium organized by Joris Degroote, Riccardo Rossi and Roland Wüchner |
MS042A Room: Business Centre II Chair: Roland Wüchner |
|
Immersed fluid-structure interaction for isogeometric shell structures, with application to bioprosthetic heart valves
An embedded approach for the fluid-structure interaction problems involving light-weight structures
FSI analysis of lightweight structures. Towards a virtual wind tunnel
Co-simulation of wind-structure interactions
Analysis of wind-induced vibrations in silo groups
Fluid-structure interaction analysis with slippery mucus skin
|
|
|
23/7/2014
14:00 - 16:00 Innovative Numerical Approaches for Multi-physics Problems III Minisymposium organized by Anna Pandolfi, Laurent Stainier and Kerstin Weinberg |
MS129C Room: Sala de prensa I Chair: Anna Pandolfi |
|
Stable mesh transfer for parallel multi-physics simulations
Fundamental investigation on thermoacoustic phenomena inside narrow tube by CFD
Numerical multiphysics simulation for localized galvanic corrosion problems
Optimisation of the position of the material points in the maximum entropy interpolation
Nonlocal regularization for loss of ellipticity in inelastic problems
Experimental study for verification computational modeling of operation of the conductive MHD centrifugal pump
|
|
|
23/7/2014
14:00 - 16:00 Microstructural Based Constitutive Models in Hard and Soft Matter Materials III Minisymposium organized by Christian Miehe, Samuel Forest and Christian Linder |
MS140C Room: Sala de prensa II Chair: Samuel Forest CoChair: Christian Miehe |
|
A thermodynamically consistent model for the description of polymeric gels at large deformations (Keynote Lecture)
Mixed variational potentials for Cahn-Hilliard-type diffusive phase separation in solids undergoing finite strains
The nonlinear elastic response of suspensions of rigid inclusions in rubber
A microstructurally based constitutive model for shape-memory polymers formulated in the logarithmic strain space
Constitutive modelling and parameter identification of Highly Extensible Polyurea
|
|
|
23/7/2014
14:00 - 16:00 Advances in Surgical Simulation I Minisymposium organized by Stéphane Bordas, Pierre Kerfriden, Elías Cueto, Francisco Chinesta and Stefanie Reese |
MS222A Room: Sala de Reservas Chair: Stéphane Bordas |
|
Gradient smoothing for nearly incompressible hyperelasticity
Fracture simulation for visual effects with peridynamics and MPM
Real-time simulation of surgical cutting using PGD
A modified Hager-Zhang nonlinear conjugate gradient algorithm for efficient solution of finite element models
Parallel simulations of soft-tissue using an adaptive quadtree/octree implicit boundary finite element method
Efficient planning of liver tumour surgical intervention
|
|
|
16:00 - 16:30 Coffee Break & Poster Sessions |
|
|
16:30 - 18:30 TECHNICAL SESSIONS |
|
|
23/7/2014
16:30 - 18:30 Advances in Numerical Methods for Linear and Non-linear Dynamics IV Minisymposium organized by Alexander Idesman and Gregory Hulbert |
MS087D Room: Mare Nostrum A Chair: Alexander Idesman CoChair: Gregory Hulbert |
|
A new particular solution strategy for hyperbolic problems using hybrid-Trefftz finite elements
Limitations of an equivalent linearized method on vibration analysis of a flexible cantilever beam
Dynamic chain drive simulation in an elastic environment – Influence of friction on the dynamics
Group theory based method for the dynamic analysis of periodic structures
Mathematical simulation of transient cable line for the loss in the screen
On linearization of nonlinear dynamic systems described by state-dependent-parameter (SDP) discrete-time model
|
|
|
23/7/2014
16:30 - 18:30 Advances in Shape and Topology Optimization of Structures and Materials IV Minisymposium organized by Michael Wang, Zhen Luo and Takayuki Yamada |
MS494D Room: Mare Nostrum B Chair: Takayuki Yamada CoChair: Seungjae Min |
|
Level set-based topology optimization method for mechanical structures considering structural flexibility (Keynote Lecture)
Vibration reduction design of permanent magnet motor using multi phase level set model
Modeling and FEM analysis of dynamic properties of thermally optimal composite materials
Optimization of the shape of pendulum vibration absorbers and curved track patterns to minimize vibration
Shape optimization of rubber bushing
|
|
|
23/7/2014
16:30 - 18:30 Discontinuous Galerkin Methods: New Trends and Applications III Minisymposium organized by Bernardo Cockburn, Sonia Fernandez-Mendez, Nicoletta Franchina, Ngoc-Cuong Nguyen, Jaime Peraire and Per-Olof Persson |
MS139C Room: Mare Nostrum C Chair: Per-Olof Persson |
|
High Order Discontinuous Galerkin Methods for Large Eddy Simulations
Assessing numerical viscosity for Implicit LES using linear instability analysis: examples for a high order incompressible Discontinuous Galerkin – Fourier solver
The recovery-based Discontinuous Galerkin method for the Navier-Stokes equations
A Reynolds-Averaged Navier-Stokes solver with transition prediction capability
Numerical investigation of turbulence drag reduction with streamwise riblets in high-speed channel flow
Efficient and accurate multi-dimensional limiting strategy for higher-order DG and CPR methods
A Discontinuous Galerkin method for non-Newtonian implicit constitutive models of nonequilibrium gases
|
|
|
23/7/2014
16:30 - 18:30 Computational Fluid Dynamics for Free and Moving Boundaries IV Minisymposium organized by Rekha R. Rao, David R. Noble, Scott A. Roberts and Elie Hachem |
MS256D Room: Mare Nostrum D Chair: ELIE HACHEM CoChair: Scott Roberts |
|
Descent of a solid disk in quiescent fluid simulated using incompressible smoothed particle hydrodynamics
CFD analysis of flow around fish swimming near or through water surface
Comparison of the Vortex Method and the Immersed Boundary Method for 2D Simulations of Insect Flight
Application of the meshless boundary method to the thermal/flow problems with moving structures
Further validations of penalization and VIC based methods for aeronautic applications
|
|
|
23/7/2014
16:30 - 18:30 Uncertainty Modeling and High Performance Stochastic Methods for Computationally Intensive Calibrations, Predictions and Optimizations IV Minisymposium organized by Tan Bui-Thanh, Thomas Carraro, Marko Laine and Ernesto E. Prudencio |
MS184D Room: Mare Nostrum E Chair: Ernesto Prudencio |
|
Selection, Calibration, and Validation of Coarse-Grained Models of Atomistic Systems in the Presence of Uncertainties.
Comparision of alternative approaches for the stochastic finite element analysis of structures with elasto-plastic damage behavior
Accounting for aeroelasticity model-form uncertainty in a Bayesian framework
Reliability analysis of structural dynamic characteristics based on a reduced physical model
Bayesian updating of numerical models with subset simulation
Identification of elastoplastic material properties in a Bayesian setting
Accounting for uncertainties on the modeling of an RCC DAM construction
|
|
|
23/7/2014
16:30 - 18:30 Innovative Integration Schemes in Solid, Fluid, and Multibody Mechanics I Minisymposium organized by Ignacio Romero and Peter Betsch |
MS124A Room: Mare Nostrum F Chair: Ignacio Romero |
|
Energy-consistent time integration for nonlinear viscoelasticity
Structure-preserving integration with mixed finite elements
Galerkin variational integrators for solid and fluids mechanics
Time integration in systems with instabilities
Variational space-time integration methods for the elastic wave equation
|
|
|
23/7/2014
16:30 - 18:30 Dynamics of Nonlinear Structures with Contact Interfaces I Minisymposium organized by Bogdan Epureanu, Evgeny Petrov, Kai Willner and Stefano Zucca |
MS228A Room: Llevant Chair: Evgeny Petrov CoChair: Kai Willner |
|
An adaptive contact area approximation for bi-linear modal reduction of structures with intermittent contacts
Non-homogenous localized Kelvin-Voigt model for estimation of dynamical behaviour of structures with bolted joints
Multiple solutions in the forced response of turbine blades with wedge friction dampers
Jiont stiffness identification of a pin with variable fastening forces
Prediction of rattle occurrence using probabilistic approach
Solvability for dynamic thermo-elasto-plastic contact problems
Numerical simulation of 3D impact problem
|
|
|
23/7/2014
16:30 - 18:30 Advanced Discretization and Solution Methods for Coupled Multiphysics Transport Phenomena II Minisymposium organized by John Shadid and Dmitri Kuzmin |
MS115B Room: Mestral Chair: John Shadid |
|
A space-time FEM for PDES on evolving surfaces
A finite element method for fluid-structure interaction problems with large deformations
A highly parallel code for strongly coupled fluid-transport equations
Monotone finite volume scheme for multiphase flows
A new kind of hyperbolic advection-diffusion models
Acceleration by RK/Implicit smoother for coupled Navier-Stokes and heat transfer
|
|
|
23/7/2014
16:30 - 18:30 Modeling and Experimental Characterization of Microstructures and Material Instabilities I Minisymposium organized by Benjamin Klusemann, Tuncay Yalcinkaya, Swantje Bargmann and Dierk Raabe |
MS111A Room: Ponent 1 Chair: Benjamin Klusemann |
|
Atomistic Ssmulations of dislocation-grain boundary interactions and nanocrystal plasticity (Keynote Lecture)
Modelling of grain boundries in a strain gradient crystal plasticity framework
Deformation banding in metal crystals as a material instability: theory, algorithm and modeling
An experimental combination of loading path and strain rate change – Microstructure evolution and flow behavior for a BCC and FCC material
An extended continuum crystal plasticity theory with geometrically necessary dislocation densities
|
|
|
23/7/2014
16:30 - 18:30 Industrial Applications of Computational Solid Mechanics and Related Techniques III |
CS659C Room: Ponent 2 Chair: Miguel Cervera |
|
Simulation of Failure in Single-Lap-Joints Assemblies of Carbon Fibre Tapes
Study on sensitivity of enhanced FWD testing data to pavement model parameters
Development of a Fatigue Life Assesment System Based on the Virtual Working Simulation for Wheel Loader
Accuracy assessment of gas damping ratio prediction models in microcantilevers
Experimental and numerical studies of large steel plates for power transformer tank subjected to high pressure loading
Plasticity in silicon anodes towards the design of lithium ion batteries
|
|
|
23/7/2014
16:30 - 18:30 Mesh Generation and Adaption IV Minisymposium organized by Josep Sarrate, Franck Ledoux and Rafael Montenegro |
MS198D Room: Terral Chair: Rafael Montenegro Armas |
|
Robust octree based tetrahedra mesher for non-watertight geometries
A Truss Networked Approach to r-Refinement for Computational Fluid Dynamics
Wind ensemble forecasting using an adaptive mass-consistent model
Adaptive grid refinement for free-surface hydrodynamic flows
Adaptive finite element method with a local element parametrization of nested meshes
Mesh adaptation for viscous simulations
Geometric adaptive functionals for structured grid generation
|
|
|
23/7/2014
16:30 - 18:30 Optimization in Computational Mechanics I Minisymposium organized by Gebrail Bekdas and Sinan Melih Nigdeli |
MS048A Room: Tramuntana 1 Chair: Gebrail Bekdas CoChair: Sinan Melih Nigdeli |
|
Bionic optimisation considering scattering of fixed and free parameters
Development of efficient optimization and application to pressure vessel of fuel-cell vehicles
Optimization of RC frame structures subjected to static loading
Genetic algorithm integrated sliding mode control of a vehicle
Preventing the displacement of base isolated structures with optimum tuned mass dampers
Optimization of pulsed thermomelectric through non-linear finite element analysis
Operational risk assessment of failure to obtain the properties of thermal treatment of air aluminum alloys
|
|
|
23/7/2014
16:30 - 18:30 Advanced Numerical Methods II |
CS656B Room: Tramuntana 2 Chair: Pilar Ariza |
|
Approximating coupler curves using strip trees
An efficient technique based on numerical mode matching for the acoustic characterization of dissipative silencers with thermal gradients
Quadrilateral axisymmetric 4-node hybrid-stress elements using the Quadrilateral Area Coordinate Method (QACM)
Configuration-dependent interpolation in higher order 2D beam finite elements
Modeling of DNA damage in G2/M regulatory network with robustness study
An SGBEM formulation for cohesive delamination model with coulomb friction
Deviational methods for multiscale kinetic simulation
|
|
|
23/7/2014
16:30 - 18:30 Reinforced Fiber Composites: Analysis and Design I Minisymposium organized by Pedro V. Marcal, Jeffrey T. Fong and Nobuki Yamagata |
MS186A Room: Xaloc Chair: Pedro Marcal CoChair: Nobuki Yamagata |
|
Modeling and SPH analysis of composite materials
Buckling analysis of grid-stiffened composite shells
Constitutive and computational modelling of the effect of fibre bending resistance in reinforced elastomers
Macro model for 3D fiber reinforced polymer composites
Three-dimensional image processing applied to the characterization of lightweight mortar reinforced with piassaba fibers
Towards fiber bundle models for composite pressure vessels
Two step homogenization approach for modeling the macroscopic material behavior of textile reinforced composites
|
|
|
23/7/2014
16:30 - 18:30 Finite Element Methods and High-Performance Computing for Environmental Fluid Mechanics II Minisymposium organized by Ethan Kubatko and Kazuo Kashiyama |
MS152B Room: Salon Club Chair: Kazuo Kashiyama |
|
Pressure forcing and time splitting for Discontinuous Galerkin approximations to layered ocean models (Keynote Lecture)
Mesh generation techniques for representing complex coastal watersheds and floodplains
Large scale tsunami simulation by a particle method and its 3D visualization
Achieving efficient solutions to the shallow water equations with high-order Discontinuous Galerkin methods
2D salinity calculations for lower St. Johns River using Discontinuous Galerkin methods
An LES-like stabilization of the spectral element solution of the Euler equations for atmospheric flows
|
|
|
23/7/2014
16:30 - 18:30 Computational Methods in Fluid-structure Interactions, Dynamics and Vibration, Vibroacoustics - A Minisymposium in Honor of Prof. Roger Ohayon VIII Minisymposium organized by Christian Soize |
MS009H Room: Yasmin A Chair: Isaac Harari CoChair: Christian Soize |
|
Principles of least action and of least constraint - An excursion into the history of mechanics (Keynote Lecture)
Efficient numerical method for fluid interacting with a poroelastic structure
Scaling and similitudes for vibroacoustic applications
Approximated Lax Pairs for a one-dimensional fluid-structure model
Passive, active and active-passive vibration control of plate structures using distributed piezoelectric patches
Numerical computation of noise radiation from breaking systems for squeal noise prediction
Computation and optimization of fully coupled 2D vibroacoustic wave‘s dispersion: Application to noise control
|
|
|
23/7/2014
16:30 - 18:30 Multiscale and Multiphysics Modelling for Complex Materials (MMCM5) V Minisymposium organized by Patrizia Trovalusci, Tomasz Sadowski, René de Borst and Bernhard Schrefler |
MS120E Room: Yasmin B Chair: Josef Eberhardsteiner CoChair: Patrizia Trovalusci |
|
Enhanced poromechanics for the modeling of swelling in microporous materials: Coupled effects, size effects and upscaling issues (Keynote Lecture)
Nonlinear computational homogenization of perfused porous media using the sensitivity analysis
Size effect in crack pattern of natural and man-made materials
Two-phase material point model in analysis of erosion problems
Coupled THM modelling of freezing soil based upon strength upscaling
Characterization of interphase for cross-linked epoxy nanocomposites with a multiscale approach
Hydrogen Embrittlement of Iron Bi-Crystals
|
|
|
23/7/2014
16:30 - 18:30 Algorithmic Aspects of High-performance Computing for Mechanics and Physics I Minisymposium organized by Santiago Badia, Victor Calo and Javier Principe |
MS172A Room: Yasmin C Chair: Javier Principe |
|
Balancing Neumann-Neumann preconditioner for a diagonal-scaled schur complement equation
Scaling seismic imaging algorithms to petascale computing and beyond
Generalized multiscale finite element method for the wave equation
Large scale dislocation dynamics simulations
Emerging challenges for EdgeCFD simulations in massively multicore architectures
Large-scale Full-wave Simulation using Numerical Human Models in HPCI
A rapidly convergent algorithm for the solution of Navier-Stokes equations
|
|
|
23/7/2014
16:30 - 18:30 STS 05: Transition Location Effect on Shock Wave Boundary Layer Interaction |
STS05A Room: Auditorium Chair: to be confirmed |
|
Computational investigations on correlation between laminar-turbulent-transition location and buffet onset
Effect of the transition location on a shock-boundary layer interaction
DNS and stability analysis of a transitional shock-wave/boundary-layer interaction at M = 1.5
Transition location effects on a supercritical airfoil
Application of EARSM turbulence model to shock boundary layer interaction with laminar to turbulent transition
Implicit CFD method for transitional shock wave – Boundary layer interaction
|
|
|
23/7/2014
16:30 - 18:30 Advanced Materials: Computational Analysis of Properties and Performance II Minisymposium organized by Vadim Silberschmidt and Valery Matveenko |
MS006B Room: Sala A Chair: Anil Virkar CoChair: Kenneth Reifsnider |
|
Validated predictive computational methods for surface charge in heterogeneous functional materials: HeteroFoaM (Keynote Lecture)
Failure of cation and anion-conducting materials in electrochemical devices under internally generated pressure
An analytical performance assessment tool for complex reticulated 3-D electrochemical electrode microstructures
Conformal computation of oxygen flux in heterogeneous mixed-conductor materials
Multiscale analysis of residual stresses during processing of nano-based interconnect materials
Finite element phase-field modelling of brittle fracture
Multilevel modeling of polycrystalline metals mechanical processing
|
|
|
23/7/2014
16:30 - 18:30 Transition Modeling and Prediction in CFD Solvers with Focus on Practical Applications II Minisymposium organized by Andreas Krumbein, Cornelia Grabe, Jean Perraud and Hugues Deniau |
MS147B Room: Sala B1 Chair: Jean Perraud CoChair: Andreas Krumbein |
|
Laminar-turbulent transition modelling based on a new intermittency model formulation
Transition prediction on fixed wings, rotating blades, and airframes using a correlation-based model
Modelling of crossflow-induced transition based on local variables
Correlation-based transition modeling for three-dimensional aerodynamic configurations
Numerical analysis of turbulent flow around energy saving pre-swirl stator for full and model scale ships
Wake-integral method for drag prediction
|
|
|
23/7/2014
16:30 - 18:30 Modeling of Fiber-based Structures - Textiles and Textile Reinforced Composites II Minisymposium organized by Yordan Kyosev, Philippe Boisse and Damien Durville |
MS014B Room: Sala B2 Chair: Nahiene Hamila |
|
Bend-over-sheave of synthetic braided ropes: Approach to internal mechanisms through finite element simulation
Modeling and design optimization of textiles via homogenization
Computational aspects about the multiscale modelling of textile wound structures
Modeling of multiaxial non-crimp fabrics
Multiscale quasicontinuum approaches for discrete models of fibrous materials such as electronic textile and paper materials
Multi-scale modelling of the mechanical behavior of textile reinforcements
|
|
|
23/7/2014
16:30 - 18:30 Advanced Computational Techniques in Geophysical Sciences III Minisymposium organized by Hélène Barucq, Rabia Djellouli and Kersten Schmidt |
MS170C Room: Sala B3 Chair: Helene Barucq |
|
Discontinuous Galerkin methods for solving Helmoltz elastic wave equations for seismic imaging
hp-FEM and hp-DGFEM for the Helmholtz equation
Computational model of seismic wave propagation in prestressed formation
Multidimensional algorithm for the inversion of magnetotelluric measurements
A 2-D numerical model to analyze stress distribution in a soil mass due to applied loads
Numerical simulation of grounding systems for compact underground electrical substations by means of a BEM formulation
|
|
|
23/7/2014
16:30 - 18:30 Numerical Analysis and Design for Advanced Engineering Solutions II Minisymposium organized by Wolfgang Graf, Edoardo Patelli, André T. Beck, Michael Beer and Héctor A. Jensen |
MS055B Room: Sala C1 Chair: Takashi Hara CoChair: Wolfgang Graf |
|
A single-synchronized linear solver for the solution of problems of computational mechanics on parallel computers
Flight characteristics analysis of Solar UAV by MATLAB/SIMULINK
HDMR based response surfaces for probabilistic bridge vehicle interaction studies
Another way of solving the Taylor Vortex and the driven Cavity problem in the stream function-vorticity formulation
|
|
|
23/7/2014
16:30 - 18:30 Inverse Problems, Design and Optimization II Minisymposium organized by Marcelo Colaço, Helcio Orlande, George Dulikravich and Ireneusz Szczygiel |
MS024B Room: Sala C2 Chair: Helcio Orlande CoChair: Marcelo Colaço |
|
Conceptual design of three stage hybrid rocket using genetic algorithm
Wall-based feedback control of an incompressible laminar boundary layer subjected to free-stream vortical disturbances
High temperatures measurement and reconstruction in high-speed flow
Simulation/optimization in reactive in-mold coating
Further improvements in the convergence of TOUGH2 simulations
Genetic algorithms operators for improving the optimization performance
|
|
|
23/7/2014
16:30 - 18:30 Nonlinear Computational Stability Analysis II Minisymposium organized by Herbert Mang and Yeong-Bin Yang |
MS236B Room: Sala C3 Chair: Franz G. Rammerstorfer |
|
Loss of stability of structures under global tension – Modeling and simulation of some typical examples (Keynote Lecture)
On stability bahaviour of thin-walled columns accounting for initial geometrical imperfections
post-buckling analysis of large structures: primal and mixed non linear domain decomposition methods
Shear deformable hybrid finite-element formulation for buckling analysis of thin-walled members
|
|
|
23/7/2014
16:30 - 18:30 Computational Geomechanics II Minisymposium organized by Kristian Krabbenhoft, Scott Sloan, Dorival Pedroso and Jose Andrade |
MS019B Room: Sala D1 Chair: Jose Andrade |
|
Incipient motion for non--cohesive sediment ellipsoidal particles by the Discrete Element Method (DEM)
A level set-based granular element method
FE-analysis of granular materials based on X-ray CT data
Sensitivity analysis of stress states induced by salt structure
Modelling of fluid flow in hydrocarbon reservoirs crossed by sealing faults using finite elements with embedded discontinuities in pressure field
A new strategy to simulate particle crushing in DEM analysis
Investigation of critical factors for Hardin’s relative breakage by discrete element method
|
|
|
23/7/2014
16:30 - 18:30 Computational Modelling of Material Forming Processes II Minisymposium organized by Carlos Agelet de Saracibar and Robertt Valente |
MS023B Room: Sala D2 Chair: Robertt Valente CoChair: Carlos Agelet de Saracibar |
|
Numerical simulation of the forming limit curves of a heat treated AA110-H14 aluminium alloy sheet using an efficient implementation of a VPSC based MK model (Keynote Lecture)
Finite element analysis of incremental sheet metal forming with successive tool paths for use in prototype manufacturing of car body components
Typology analysis for the optimisation of a stamping process
Modelling of Thermoplastic PolyOlefin (TPO) sheets for thermoforming applications
A fully implicit Log-Conformation formulation
Simulation of forming, welding and heat treatment of an alloy 718 component
|
|
|
23/7/2014
16:30 - 18:30 Biomechanics and Mechanobiology III Minisymposium organized by Guillermo Rus, Quentin Grimal and Elisa Budyn |
MS013C Room: Sala D3 Chair: Guillermo Rus |
|
Parameter Relevance in a Three Dimensional Colonic Crypt Model
Numerical modelling of the dynamics of isolated red blood cells flowing in a cytometer
Real-time Inverse-dynamic FE Modelling of Shoulder Articular Cartilage
Systems biology approach in computational biomechanics
Computational modeling of an MRI guided drug delivery system based on magnetic nanoparticle aggregations for the navigation of paramagnetic nanocapsules in the cardiovascular system
|
|
|
23/7/2014
16:30 - 18:30 Explicit and Implicit Large Eddy Simulation of Turbulent Flows II Minisymposium organized by Joanna Szmelter and Piotr K Smolarkiewicz |
MS084B Room: Sala D4 Chair: Piotr Smolarkiewicz |
|
Implicit Large Eddy Simulation on unstructured meshes (Keynote Lecture)
An unstructured mesh nonhydrostatic model for orographic flows
Modelling over-expanded jet screech by iles
Large-eddy simulation of turbulent flow over a wall undergoing streamwise traveling-wave motion
Aerodynamics and aeroacoustics study of the flow around an automotive fan airfoil
A LES study of turbulent flow around twisted and tapered cantilever
Mathematical modelling of wind action on civil structures using ANSYS Fluent
|
|
|
23/7/2014
16:30 - 18:30 Advances in the Modelling and Simulation of Oil Drilling Operations II Minisymposium organized by Pere-Andreu Ubach and Raju Gandikota |
MS272B Room: Sala D5 Chair: Raju Gandikota CoChair: Pere-Andreu Ubach de Fuentes |
|
An extended finite element method for hydraulic fracturing of fully saturated porous media
Challenges in the simulation of hydraulic fracture networks in three dimensions using massively parallel computing platforms
Simulation of shaped-charge jet penetration into drained and undrained sandstone using the material point method with new approaches for constitutive modelling
A FEM-DEM formulation for pulsed fracturing in shale reservoirs
Hydraulic fracturing approximation using finite elements and elastoplasticity
Numerical simulation of casing centralization
Finite element well integrity analysis for open-hole and standard completion systems in a producing reservoir
|
|
|
23/7/2014
16:30 - 18:30 Computational Mechanics of Dislocations I Minisymposium organized by Steve Fitzgerald, Edmund Tarleton and Daniel Balint |
MS182A Room: Sala D6 Chair: Daniel Balint |
|
A mesoscale crystal plasticity framework based on the simplified Continuum Dislocation Dynamics (sCDD) theory
Continuum dislocation dynamics modeling in two dimensions
A comparative study of the numerical treatment of dislocation transport equations in crystal plasticity
Analysis of kink deformation using disclination model
Three-dimensional phase field modeling of dislocation dissociation, glide and twinning in fcc materials
Dislocation Mobilities in wurtzite GaN by Molecular Dynamics
A simplified 2.5D discrete dislocation dynamics framework for simulating the deformation of single crystal nickel base superalloys
|
|
|
23/7/2014
16:30 - 18:30 Modelling of Damage in Heterogeneous Microstructures II Minisymposium organized by Ingo Scheider and Siegfried Schmauder |
MS168B Room: Sala E1 Chair: Ingo Scheider |
|
Application of analysis on graphs to site-bond models for damage evolution in heterogeneous materials
A model to represent ductile fracture at low stress triaxiality
Crack-particle interactions in heterogeneous materials
Meso-mechanically informed damage-healing and plasticity of cosserat continuum for granular materials
Mechanical response of aluminum/polyimide stretchable units: A cohesive zone model approach
A Micromechanics-Based Damage Diagnostic Model for Composite Materials
|
|
|
23/7/2014
16:30 - 18:30 Second Generation of Theory of Structures by Unified Formulation II Minisymposium organized by Erasmo Carrera, Antonio J.M. Ferreira, Maria Cinefra, Marco Petrolo, Alfonso Pagani and Enrico Zappino |
MS263B Room: Sala E2 Chair: Maria Cinefra |
|
On the use of a component-wise approach for the analysis of damaged structures (Keynote Lecture)
Refined shell elements for the analysis of multifield problems in multilayered structures
On the effectiveness of component-wise models in analyzing civil engineering framed structures
Refined 1D models for the analysis of reinforced-shell aeronautical structures including load factors effect
|
|
|
23/7/2014
16:30 - 18:30 Enabling Technologies and their Application for Advancing Computational Mechanics I Minisymposium organized by Guillaume Houzeaux, Alvaro Coutinho and William Barth |
MS074A Room: Sala E3 Chair: Guillaume Houzeaux CoChair: Beatriz Eguzkitza |
|
User interaction in uncertainty quantification analysis workflows (Keynote Lecture)
Matching communication pattern with underlying hardware architecture
MPI/OmpSs programming model and its application in simulation code
Transparent performance monitoring of production computational mechanics jobs
Using HPC software frameworks for developing BSIT: A geophysical imaging tool
Toward parallel scalable linear solvers suited for large scale hierarchical parallel platforms
Performance impact of tetrahedralization on parallel conforming octree mesh generation
|
|
|
23/7/2014
16:30 - 18:30 Dynamical Systems Approaches in Fluid Mechanics I Minisymposium organized by Juan Sánchez Umbría, Marta Net and Dolors Puigjaner |
MS103A Room: Sala E4 Chair: Dolors Puigjaner CoChair: Juan Sanchez Umbria |
|
A highly parallel bifurcation analysis tool for fluid flow problems
A parallel algorithm for pseudo-arclength continuation
Homoclinic orbits and their relevance to the onset of transient turbulence in wall flow
Nonlinear dynamics and bifurcations in equilibrium state of a spheroidal particle suspended in shear flow
Multiple modes of bubble propagation in partially occluded tubes
Stabilization of convection-diffusion problems by Shishkin mesh simulation. Latest developments
A parallel algorithm for the computation of invariant tori in large-scale dissipative systems
|
|
|
23/7/2014
16:30 - 18:30 Uncertainty Quantification Techniques for Fluid-flow Problems II Minisymposium organized by Remi Abgrall, Pietro Marco Congedo and Gianluca Iaccarino |
MS203B Room: Sala E5 Chair: Pietro Marco Congedo |
|
Uncertainty quantification in fluid dynamics: Kriging model based approach
Some advances on anchored ANOVA expansion for high order moments computation
| |
