Sunday, June 11
|
|
17:00 - 19:00
Registration
|
|
|
19:00 - 20:30
Welcome Reception
|
|
Monday, June 12
|
|
08:30 - 11:15
Registration
|
|
11:15 - 11:30
Opening
|
MoMP
Room: Delphi
Chair: to be confirmed
|
|
11:30 - 13:00
Plenary Lectures I
|
MoMP
Room: Delphi
Chair: Eugenio Oñate
|
Numerical solution algorithms for cardiac modeling
A. Quarteroni
High fidelity parameterized approximations
A. Huerta
|
|
13:00 - 14:00
Lunch Break
|
|
14:00 - 16:00
TECHNICAL SESSIONS
|
IS - Particle-Based Methods in Coupled Problems I
Invited Session organized by Sergio Idelsohn and Eugenio Oñate
|
MoA01
Room: Delphi
Chair: Sergio Idelsohn
|
Massively parallel Lattice Boltzmann simulations of fully resolved particulate flows
C. Rettinger, C. Godenschwager, S. Eibl, T. Preclik, T. Schruff and U. Ruede
A large-scale LBM-DEM simulation based on direct calculation of fluid-solid interactions using multiple GPUs
S. Watanabe, T. Aoki and Y. Hasegawa
Modeling of granular flow in silos as a strongly-coupled system
J. Dhabalia, F. Ockelmann, S. Reinstädler and D. Dinkler
Investigating the fragility of packed structures with a combined finite-discrete element method
A. Farsi, J. Xiang, J.P. Latham, M. Carlsson, E.H. Stitt and M. Marigo
|
IS - Computational Models and Methods for Multiphysics Processes in Multiphase Porous Media I
Invited Session organized by Claudio Tamagnini and Lorenzo Sanavia
|
MoA02
Room: Salon Des Roses A
Chair: Claudio Tamagnini
|
Keynote Lecture: On fracking processes in saturated porous media
W. Ehlers and C. Luo
Variational interface zone model for modeling of fluid induced fracture
I. Khisamitov and G. Meschke
A discrete numerical model of the front region of piping erosion
F. Froiio, C. Callari, A.F. Rotunno, A. Guidobaldi and D.K. Tran
A computational method for piping erosion with hydro-mechanical coupling
A.F. Rotunno, C. Callari and F. Froiio
SUPG stabilized free surface flow at composites processing
R. Larsson and D. Wu
Influence of mechanical yielding on predictions of saturation: the saturation line
M. Lloret-Cabot and S.J. Wheeler
|
IS - Advances in Heterogeneous Numerical Methods I
Invited Session organized by Pavel B. Bochev, John N. Shadid and Kara Peterson
|
MoA03
Room: Salon Des Roses B
Chair: Marta D‘Elia
|
Coupling methods in climate models
R.L. Jacob
A theoretical study of a simplified air-sea coupling problem including turbulent parameterizations
C. Pelletier, F. Lemarié and E. Blayo
An added mass partitioned algorithm for rigid bodies and incompressible flows
J.W. Banks
Explicit partitioned methods for coupled problems based on Lagrange multipliers
K. Peterson, P. Kuberry and P. Bochev
|
IS - Model Order Reduction for Coupled Problems I
Invited Session organized by Francisco Chinesta and Elías Cueto
|
MoA04
Room: Athena
Chair: Elías Cueto
|
Keynote Lecture: Certified model order reduction for coupled mechanical systems
J. Fehr, D. Grunert and B. Haasdonk
A manifold learning approach for integrated computational materials engineering
E. Lopez, D. Gonzalez, J.V. Aguado, E. Abisset-Chavanne, E. Cueto, C. Binetruy and F. Chinesta
Manifold learning for reduced order modelling with latent parameters
D. González, E. López, J.V. Aguado, E. Cueto and F. Chinesta
Data assimilation with reduced-order physical priors
D. Gonzalez, F. Chinesta and E. Cueto
Reduced-order hygrothermal modeling based on proper generalized decomposition for building simulation
D. Borzacchiello, J. Berger, J.V. Aguado and F. Chinesta
|
IS - Computational Nanomedicine I (15:20 - 16:00)
Invited Session organized by Paolo Decuzzi
|
MoA05
Room: Nafsika A
Chair: Paolo Decuzzi
|
Computational Nanomedicine: challenges and opportunities in the rational design of polymeric nanoconstructs
P. Decuzzi
Organization and plasticity of the nanoparticle-coating monolayer control its conformation, solubility and molecular recognition ability
L. Riccardi, L. Gabrielli, X. Sun, F. De Biasi, F. Rastrelli, F. Mancin and M. De Vivo
Numerical assessment of blood damage through prosthetic heart valves
M.D. de Tullio
|
IS - Advanced Arbitrary Langrangian-Eulerian Methods for Multiphysics Systems (14:00 - 15:20)
Invited Session organized by Michael Gee, Guglielmo Scovazzi, John N. Shadid and Matthias Mayr
|
MoA05
Room: Nafsika A
Chair: Michael Gee
|
Coupling schemes for the FSI forward prediction challenge: comparative study and validation
M. Landajuela, M. Vidrascu, D. Chapelle and M.A. Fernández
Reduced order methods for fluid-structure interaction problems
G. Rozza and F. Ballarin
Implicit-explicit (IMEX) time integration for multi-physics: application to ALE-based CFD simulations
M. Mayr, E.C. Cyr, J.N. Shadid, R.P. Pawlowski, T.M. Wildey, G. Scovazzi, X. Zeng, E.G. Phillips and S. Conde
A multiphysics approach to modeling early atherosclerosis progression
M.W. Gee, M. Thon, A. Hemmler and M. Mayr
|
IS - Multi-phase Flows and Droplet Dynamics: Models and Industrial Applications
Invited Session organized by Pavel Ryzhakov
|
MoA06
Room: Nafsika B
Chair: Pavel Ryzhakov
|
Keynote Lecture: Multiphase water transport in polymer electrolyte fuel cells: From phase change induced flow to droplet dynamics
M. Secanell, M. Sabharwal, J. Zhou, A. Jarauta, A. Putz, P. Ryzhakov and J. Pons-Prats
Embedded Eulerian-Lagrangian two-phase modelling of inkjet printing
A. Jarauta, P. Ryzhakov, J. Pons-Prats and M. Secanell
Liquid tightrope walkers
P.-B. Bintein, H. Bense, C. Clanet and D. Quéré
Keynote Lecture: Dynamic wetting: models, experiments, and simulations
D. Seveno, T.D. Blake and J. De Coninck
Multiphysics, multiphase and multiscale modeling of polymer electrolyte fuel cells: with a focus on the gas diffusion layer
P.A. García-Salaberri, J.T. Gostick, G. Hwang, M. Vera, I. Zenyuk and A.Z. Weber
|
IS - Coupling of Different Numerical Methods and to CAD
Invited Session organized by Gernot Beer
|
MoA07
Room: Nefeli A
Chair: Gernot Beer
|
State of development of coupling simulation with CAD
G. Beer
Coupling micro- and macroscopic levels in a sintering model
J. Rojek, S. Nosewicz and M. Chmielewski
Boundary element analysis of steady incompressible viscous flow with isogeometric and isoparametric discretisation
C. Duenser and G. Beer
A coupled Lagrangian-Eulerian approach for the moving boundary method and its application to applied aerodynamics problems on massively parallel environment
M. Tsubokura, R. Bale and K. Onishi
Large-scale debris-blastwave interaction simulation using GPU supercomputer
U.-H. Wong, T. Aoki and T. Sugiyama
Lattice Boltzmann simulations coupled with octree-based locally-refined mesh using space-filling curves
Y. Hasegawa and T. Aoki
|
IS - Multi-physics Modeling and Multi-Scale Simulation of Aging and Deteriorating Materials I
Invited Session organized by Manfred Krafczyk, Laura De Lorenzis, Dieter Dinkler and Peter Wriggers
|
MoA08
Room: Nefeli B
Chair: Manfred Krafczyk
|
The effective diffusivity of microcracked porous materials: micromechanics models and mesoscale simulations
J.J. Timothy, T. Iskhakov and G. Meschke
Advanced Lattice Boltzmann advection-diffusion-reaction simulations of chloride transport inside hardened cement paste micro-pores
H. Alihussein, M. Krafczyk, K. Kutscher and M. Geier
Phase-field modeling of fracture in partially saturated porous media
T. Cajuhi, L. De Lorenzis and L. Sanavia
A new material description for plant tissues under frost exposure
L. Eurich, A. Wagner and W. Ehlers
A fully parallel coupled approach with a discontinuous galerkin solver
O. Labbé
|
Numerical Methods in Coupled Problems: Finite Difference, Particle Methods, Meshless Methods, etc. I
|
MoA09
Room: Alpha
Chair: to be confirmed
|
Numerical simulation of a thermo-electromagneto-fluid dynamic problem arising from the metallurgical refining of molten metals
A. Bermúdez, D. Gómez and D. González-Peñas
Acceleration methods for fixed point coupled problems iterations
I. Ramière and T. Helfer
Mixed variational formulations for multi-field problems
M. Dittmann and C. Hesch
Hybrid flow simulations in confined geometries using MD-data
N. Emamy, L. Yelash, M. Lukácová, S. Stalter and P. Virnau
Phase-field simulation of flexoelectricity in ferroelectrics by mixed finite element method
S. Wang and B.-X. Xu
Numerical simulations of gas-focused micro jets
Grega Belšak, Bozidar Šarler, Kenneth R. Beyerlein, Juraj Knoška, Luigi Adriano, Henry N. Chapman and S. Bajt
|
Coupled Problems in Fluid Structure Interaction I
|
MoA10
Room: Gamma
Chair: to be confirmed
|
Application of the modified finite particle method to the simulation of the corneal air puff test
A. Montanino, M. Angelillo and A. Pandolfi
Comparison of fixed and deforming fluid grid approaches for simulation of fluid-structure interaction between yarn and supersonic flow
J. Degroote, A. Osman, B. Malengier, S. De Meulemeester, J. Peeters and J. Vierendeels
Fluid-structure interaction modeling of artery aneurysms with steady-state configurations
E. Aulisa, G. Bornia and S. Calandrini
Analysis of flapping motion considering three kinematic mechanisms by partitioned iterative FSI analysis system
G. Hong, T. Yamada, N. Mitsume and S. Yoshimura
Development of parallel fluid-structure coupled analysis method using enriched free mesh method and its effectiveness
S. Nagaoka, Y. Nakabayashi, Y. Tamura and G. Yagawa
Transmission and reflection of long waves over steep bathymetry variations using large floating strips of shallow draft
T.K. Papathanasiou and A. Karperaki
|
Multiphysics Problems I
|
MoA11
Room: Epsilon
Chair: to be confirmed
|
On the simulation of dropletization
R. Löhner, J.D. Baum, F. Togashi, M.E. Giltrud and O.A. Soto
A coupled multiphase-field and carbon diffusion model for lower bainitic transformation
M. Düsing and R. Mahnken
Investigation of advanced turbulence modeling approaches for aeroacoustic problems
X. Huang and M. Schäfer
Asymptotic limits of the lattice Boltzmann phase field model based on the conservative Allen-Cahn equation
M. Geier
High-order multi-material ALE hydrodynamics
R.W. Anderson, V.A. Dobrev, T.V. Kolev, R.N. Rieben and V.Z. Tomov
Modeling of an electrically driven droplet generator
Y. Ouédraogo, E. Gjonaj, T. Weiland, H. De Gersem, C. Steinhausen, G. Lamanna, B. Weigand, A. Preusche and A. Dreizler
|
|
|
16:00 - 16:30
Coffee Break
|
|
16:30 - 18:30
TECHNICAL SESSIONS
|
IS - Particle-Based Methods in Coupled Problems II
Invited Session organized by Sergio Idelsohn and Eugenio Oñate
|
MoE01
Room: Delphi
Chair: Eugenio Oñate
|
Keynote Lecture: A fully explicit fluid-structure interaction approach based on PFEM
S. Meduri, M. Cremonesi and U. Perego
An approach for simulation of polymers in fire situations.
J. Marti, S. Idelsohn and E. Oñate
Large-scale simulations of viscoelastic deformable multi-body systems using Quadruple Discrete Element Method on Supercomputers
S. Tsuzuki, D. Nishiura and H. Sakaguchi
A meshfree collocation method for implicit-explicit switching in coupled thermo-mechanics problems
K.A. Fraser, L.I. Kiss and L. St-Georges
|
IS - Computational Models and Methods for Multiphysics Processes in Multiphase Porous Media II
Invited Session organized by Claudio Tamagnini and Lorenzo Sanavia
|
MoE02
Room: Salon Des Roses A
Chair: Claudio Tamagnini
|
Coupled THM modeling of energy micro–pile behavior
D. Salciarini, F. Ronchi and C. Tamagnini
Isogeometric FE implementation of a second-gradient plasticity model for coupled hydro-mechanical problems
C. Plua, C. Tamagnini and P. Besuelle
A coupled elasto-plastic damage model for concrete in a mesoscale approach
G. Mazzucco, C.E. Majorana and V.A. Salomoni
A linearized microstructural model for hydraulic conductivity evolution due to brittle damage
G. Caramiello, A. Montanino, G. Della Vecchia and A. Pandolfi
Modelling radiation-induced volumetric expansion in concrete
B. Pomaro, G. Xotta, V.A. Salomoni and C.E. Majorana
Numerical modelling of the behaviour of concrete at high temperature: from continuum towards a mesoscopic approach
D. Dauti, S. Dal Pont, M. Briffaut, G. Sciumé and B. Weber
Assessment of a multi-phase formulation for the simulation of creep of young shotcrete
P. Gamnitzer, M. Neuner and G. Hofstetter
|
IS - Advances in Heterogeneous Numerical Methods II
Invited Session organized by Pavel B. Bochev, John N. Shadid and Kara Peterson
|
MoE03
Room: Salon Des Roses B
Chair: Kara Peterson
|
An optimization-based coupling strategy for local and nonlocal models with applications to static peridynamics
M. D´Elia, P. Bochev, D. Littlewood and M. Perego
Reduced-order hybrid multiscale method combining the Molecular Dynamics and the Discontinuous-Galerkin method
N. Emamy, M. Lukácová-Medvid’ová, S. Stalter, P. Virnau and L. Yelash
Simulating the interaction of electrostatically charged particles in the inflow area of cabin air filters using a fully coupled system
C. Schober, D. Keerl, M. Lehmann and M. Mehl
Coupling Navier-Stokes and Darcy equations: an overlapping approach
P. Gervasio, M. Discacciati and A. Quarteroni
Radial basis function interpolation for black-box multi-physics simulations
F. Lindner, M. Mehl and B. Uekermann
|
IS - Model Order Reduction for Coupled Problems II
Invited Session organized by Francisco Chinesta and Elías Cueto
|
MoE04
Room: Athena
Chair: Francisco Chinesta
|
Keynote Lecture: Himod and hipod in haemodynamic modeling
S. Perotto and A. Veneziani
A simulation App based on reduced order modeling for manufacturing optimization of composite outlet guide vanes
J.V. Aguado, D. Borzacchiello, C. Ghnatios, F. Lebel, R. Upadhyay, C. Binetruy and F. Chinesta
Computational vamadecum of the coupled mechanical/thermal behavior of composite materials during ultrasound curing
C. Ghnatios, A. Barasinski, I. Fernandez Villegas, G. Palardy and F. Chinesta
Microwaves heating in composites laminates processing: advanced simulation based on the PGD in-plane-out-of-plane-decomposition
H. Tertrais, C. Ghnatios, A. Barasinski and F. Chinesta
|
IS - Computational Nanomedicine II
Invited Session organized by Paolo Decuzzi
|
MoE05
Room: Nafsika A
Chair: Paolo Decuzzi
|
Coupled discrete and continuum methods for modelling of atherosclerotic disease in the coronary arteries
N. Filipovic, Z. Milosevic, I. Saveljic, T. Exarchos and O. Parodi
A combined in silico/in vitro approach for designing shear-responsive nano-medicines
M. Epshtein and N. Korin
Exploiting electrostatic models in biomolecular and hybrid system simulation
I. Vyalov, S. Corni, A. Spitaleri, S. Decherchi and W. Rocchia
Margination dynamics of arbitrarily shaped particles in shear flows
G. Pascazio, S. Ranaldo, A. Coclite and M.D. de Tullio
Modeling the vascular transport and adhesion mechanics of deformable nanoconstructs
A. Coclite, M.D. de Tullio, G. Pascazio and P. Decuzzi
Intricate journey of micro- and nano-carriers for drug delivery in the blood stream
K. Rack, M. Hoore, G. Gompper and D.A. Fedosov
|
IS - Coupled Problems in Liquid-Solid Systems
Invited Session organized by Bozidar Šarler
|
MoE06
Room: Nafsika B
Chair: Bozidar Šarler
Co-Chair: Dominique Gobin
|
Keynote Lecture: On the modeling impacts of the energy equation in the simulation of melting
E. Franquet, A. König-Haagen and D. Brüggemann
Keynote Lecture: Simulation of liquid film migration
M. Rettenmayr, O. Kashin and S. Lippmann
Influence of current and frequency on electromagnetic stirring in continuous casting of steel
M. Maček, R. Vertnik and B. Šarler
Application of local RBF collocation method to prediction of mechanics-related casting defects during DC casting of aluminium alloys
B. Mavrič and B. Šarler
Simulation of a macrosegregation benchmark on a non-uniform computational node arrangement with a meshless method
V. Hatić and B. Šarler
Coupling between submerged object and viscoplastic formulations to model macroscopic transport and grain growth of equiaxed crystals
C.M.G. Rodrigues, A. Ludwig, A. Vakhrushev, T. Holzmann, A. Kharicha and M. Wu
Meshless modelling of microstructure evolution in the continuous casting of steel
T. Dobravec, B. Mavrič, R. Vertnik and B. Šarler
|
High Performance Computing
|
MoE07
Room: Nefeli A
Chair: to be confirmed
|
Coupling fluid-solid-porous mechanics in transient regimes
R. Mezher, S. Breumier, N. Moulin, J. Bruchon and S. Drapier
Novel kinetic consistent MHD algorithm for high performance computing
B. Chetverushkin, N. D‘Ascenzo, A. Saveliev and V. Saveliev
An efficient dynamic load balancing scheme for anisotropic adaptive finite element solvers
Y. Mesri and E. Hachem
Statistical distribution function of charged particles in magnetic field
B. Chetverushkin, N. D‘Ascenzo, A. Saveliev and V. Saveliev
Implementation of mapping strategies in a distributed memory environment
J. Cotela-Dalmau, P. Bucher, A. Ghantasala, M. Andre, A. Winterstein, R. Rossi and R. Wüchner
Migrating software to mobile technology: a model-driven engineering approach
L. Favre and F. Bricker
|
IS - Multi-physics Modeling and Multi-Scale Simulation of Aging and Deteriorating Materials II (16:30 - 17:30)
Invited Session organized by Manfred Krafczyk, Laura De Lorenzis, Dieter Dinkler and Peter Wriggers
|
MoE08
Room: Nefeli B
Chair: Laura De Lorenzis
|
Mesoscale cracking behavior of a concrete with artificial aggregates and comparison with experimental results
P. Carrara, T. Wu and L. De Lorenzis
A multifield discrete model for concrete
C. Flack, F. Ockelmann and D. Dinkler
|
Multiscale Problems I (17:30 - 18:30)
|
MoE08
Room: Nefeli B
Chair: to be confirmed
|
Computation of effective nonlinear coupled electro-mechanical properties of graphene-reinforced nanocomposites
X. Lu, J. Yvonnet, F. Detrez and J. Bai
A direct solution approach for multi timescale optimal control problems
M. Bittner, B. Grüter, J. Diepolder and F. Holzapfel
Spectral methods for multi-scale plasma physics simulations
G.L. Delzanno, G. Manzini, J. Vencels, S. Markidis and V. Roytershteyn
|
Numerical Methods in Coupled Problems: Finite Difference, Particle Methods, Meshless Methods, etc. II
|
MoE09
Room: Alpha
Chair: to be confirmed
|
A two-phase flow simulation based on weakly compressible flow scheme coupled with conservative phase-field method
S. Matsushita and T. Aoki
Numerical implementation of a coupled diffusion-deformation theory for polymeric structures
A. Binti Shamjuddin and C. Sinka
The shifted boundary method: a new approach to embedded domain computations
G. Scovazzi, A. Main, T. Song and N. Atallah
An asymptotic preserving multidimensional ALE method for a system of two compressible flows coupled with friction
S. Del Pino, E. Labourasse and G. Morel
Multi-query powers of parametrized matrices and application to nonintrusive model order reduction
F. Casenave
Genetic algorithm and neural network methods for inverse problems of coupled models using topological derivative
M. Lipnicka, K. Szulc and A. Zochowski
|
Coupled Problems in Fluid Structure Interaction II
|
MoE10
Room: Gamma
Chair: to be confirmed
|
A fluid-structure solver for confined microcapsule flows
B. Sarkis, A.-V. Salsac and J.-M. Fullana
Continuum-based modeling and simulations of biological cells embedded in blood plasma
H. Casquero, C. Bona-Casas, Y. Zhang and H. Gómez
Acceleration of fluid-structure interaction procedures by anticipatory coupling
J.H. Seubers and A.E.P. Veldman
Transient modelling of the rotor-tower interaction of wind turbines using fluid-structure interaction simulations
G. Santo, M. Peeters, W. Van Paepegem and J. Degroote
Evaluation of linear and quadratic modal analysis for a partitioned FSI solver
A.E.J. Bogaers, O.F. Oxtoby, J.A. Heyns, R. Suliman and L.H. van Zyl
The Dirichlet-Neumann iteration for unsteady thermal fluid structure interaction
Azahar Monge and Philipp Birken
|
Multiphysics Problems II
|
MoE11
Room: Epsilon
Chair: to be confirmed
|
Effect of flushing on debris and heat transport in electrical-discharge machining using hierarchical Cartesian grids
G. Brito Gadeschi, L. Schneiders, M. Meinke and W. Schröder
Multiphysics modeling of solid polymer electrolytes: A finite element method investigation
D. Grazioli and A. Simone
An assessment of a coupled method between continuous and discontinuous Galerkin methods
M. Paipuri, C. Tiago and S. Fernández Méndez
Coupled numerical simulation of electro-thermal anti-icing problems
E. Iuliano and M. Ferraiuolo
A thermo-hydro-mechanical finite element model of freezing in porous media — thermo-mechanically consistent formulation and application
T. Zheng, H. Shao, X.-Y. Miao, D. Naumov, O. Kolditz and T. Nagel
Electro-chemo-mechanical behavior of lithium-ion battery electrodes
Y. Zhao, B.-X. Xu and P. Stein
|
|
Tuesday, June 13
|
08:30 - 10:30
TECHNICAL SESSIONS
|
IS - Particle-Based Methods in Coupled Problems III
Invited Session organized by Sergio Idelsohn and Eugenio Oñate
|
TuM01
Room: Delphi
Chair: Massimiliano Cremonesi
|
Modelling the fracture process of fiber reinforced ultra high performance concrete using a three-dimensional discrete element model
F. Ockelmann and D. Dinkler
Covering shock waves on Mars induced by insight‘s hp³ -Mole
R. Lichtenheldt
Front formation in bidispersed shallow chute flows.
I.F.C. Denissen, T. Weinhart, S. Luding and A.R. Thornton
Long term coating predictions in a large scale Wurster coater based on CFD DEM simulations
P. Böhling, D. Jacevic, C. Davies, A. Carmody, P. Doshi, M.T. am Ende, A. Sarkar and J.G. Khinast
Prediction of wood pellets combustion by the extended discrete element method (XDEM)
B. Peters and M. Mohseni
|
IS - Iterative Methods for Coupled Field Problems I
Invited Session organized by Haim Waisman, Suvranu De and John N. Shadid
|
TuM03
Room: Salon Des Roses B
Chair: Haim Waisman
|
An overlapping domain decomposition preconditioning method for monolithic solution of shear bands
L. Berger-Vergiat and H. Waisman
A fully coupled method for massively parallel simulation of hydraulically driven fractures in 3-dimensions
R.R. Settgast, J.A. White, C. Annavarapu, P. Fu, J.P. Morris and F.J. Ryerson
The Schwarz alternating method for concurrent multiscale coupling in solid mechanics
I. Tezaur, A. Mota and C. Alleman
A fast krylov subspace-based method for multi-physics modeling of electrosurgical cutting of soft tissue
Z. Han, C.A. López and S. De
Mixed-dimensional problems in elastic media using an iterative DtN coupling technique
Y. Ofir and D. Givoli
|
IS - Coupled Phase-Field Approaches I
Invited Session organized by Bernd Markert
|
TuM04
Room: Athena
Chair: Bernd Markert
|
Modeling of fluid-driven fracturing in multiphase porous materials
Y. Heider and B. Markert
Finite element phase field simulation of dynamic surface wetting with droplets
F. Diewald, C. Kuhn, M. Heier, M. Horsch, K. Langenbach, H. Hasse and Ralf Müller
A nemato-elastic phase-field model for liquid crystal elastomers
O. Nadgir and M.-A. Keip
Coupling of phase field models for ferroelectric and ferromagnetic layers in multiferroic heterostructures
W. Dornisch, D. Schrade, B.-X. Xu and Ralf Müller
Small strain elasto-plastic phase-field model based on the mechanical jump conditions
C. Herrmann, D. Schneider, E. Schoof, F. Schwab and B. Nestler
On stress and driving force calculation within phase-field models: Applications to martensitic phase transformation and crack propagation in multiphase systems
D. Schneider, E. Schoof, F. Schwab, C. Herrmann, M. Selzer and B. Nestler
|
IS - Coupled Problems in the Biomechanics of Bones and Arteries I
Invited Session organized by Zohar Yosibash
|
TuM05
Room: Nafsika A
Chair: Ernst Rank
Co-Chair: Aleš Kurfürst
|
Keynote Lecture: Failure in the proximal femur in simulated sideways fall impact
H. Bahaloo, W. S. Enns-Bray, I. Fleps, O. Ariza, S. Gilchrist, R. Widmer Soyka, P. Guy, H. Palsson, S. J. Ferguson, P. A. Cripton and B. Helgason
Modeling mechano-biochemical couplings in trabecular and osteonal bone remodeling
T. Adachi and Y. Kameo
CT-based finite element analysis for predicting contralateral hip fractures
N. Trabelsi, Z. Yosibash, N. Marom, Y. Brin and M. Nyska
FEA applications in clinical orthopaedic oncology - Patient-specific quantitative fracture risk assessment in patients with metastatic tumors in their femur
Z. Yosibash, N. Trabelsi and A. Sternheim
|
IS - Model Reduction for Coupled Problems in Material Science
Invited Session organized by David Ryckelynck and Felix Fritzen
|
TuM07
Room: Nefeli A
Chair: to be confirmed
|
Reduced order modelling for Lorentz detuning of superconducting accelerator cavities
J. Corno, C. de Falco and S. Schöps
Enhancement of pod-galerkin reduced order models (rom) for the 3d-unsteady and turbulent incompressible navier-stokes equations
N. Akkari
Reduced order modeling of multiscale materials with coupled dissipative bulk and interface effects
M. Leuschner and F. Fritzen
Hyper-reduction method for mechanical contact problems
J. Fauque, I. Ramière and D. Ryckelynck
Hyper-reduction framework for model calibration in plasticity-induced fatigue of AM1 superalloy
D. Ryckelynck
|
IS - Direct and Inverse Methods for Cardiovascular and Pulmonary Biomechanics I
Invited Session organized by Marek Behr, Wolfgang Wall and C. Alberto Figueroa
|
TuM08
Room: Nefeli B
Chair: Marek Behr
|
Keynote Lecture: A partitioned and a monolithic approach to fluid-composite structure interaction
D. Forti, M. Bukac, A. Quaini, S. Canic and S. Deparis
Methodology, experience and recommendations for determining parameters in closed loop cardiovascular simulations
C.J. Arthurs and C.A. Figueroa
A Statistical Method for the Evaluation of Rupture Risk in Abdominal Aortic Aneurysms based on Medical Images
M. Bassilious, S. Kehl and M.W. Gee
Estimation of left ventricular elastance from aortic flow and brachial pressure
S.Z. Pagoulatou and N. Stergiopulos
Microbubble transport in gas embolotherapy
J.L. Bull, A. Qamar, D.S. Li, S. Stephenson, J. Pitre and J.B. Fowlkes
|
Numerical Methods in Coupled Problems: Finite Difference, Particle Methods, Meshless Methods, etc. III
|
TuM09
Room: Alpha
Chair: to be confirmed
|
Coupling boundary element and finite element analysis for the efficient simulation of thermomechanical interactions between fluids and solids and its application to shaping processes.
M. Harmel and R.A. Sauer
Thermoelastic Boundary Element Modeling of heat affected zone of a low carbon steel in laser welding
D.C. Furtado, C.T.M. Anflor and B. Baranoğlu
Comparative analysis of a transient heat flow and thermal stresses by analytical and numerical methods
G. Almeida, N. Coelho and N. Alkmim
Numerical simulation of shock-tube piston problems with adaptive, anisotropic meshes
B. Re, C. Dobrzynski and A. Guardone
On conservation in compressible flow simulations using sliding mesh coupling
G. Gori, E. van der Weide and A. Guardone
High-order chimera method based on moving least squares for fluid-structure interaction
L. Ramírez, X. Nogueira, P. Ouro, F. Navarrina and M. Casteleiro
2D Simulation of dielectrophoretic multi-particle motion using Boundary Element Method
S.D. Oner, B. Cetin and B. Baranoğlu
|
Coupled Problems in Fluid Structure Interaction III
|
TuM10
Room: Gamma
Chair: to be confirmed
|
Parametric study of the vertical launcher by coupled CFD/CSD with hybrid particle level-set method
H-S. Joo, H. Cho, Y-H. Lee, J.J. Yoh and S-J. Shin
Staggered strong coupling between existing fluid and solid solvers through a Python interface for fluid-structure interaction problems
D. Thomas, A. Variyar, R. Boman, T.D. Economon, J.J. Alonso, G. Dimitriadis and V.E. Terrapon
The comparison of different acoustic approaches in the simulation of human phonation
J. Valášek, M. Kaltenbacher and P. Sváček
Numerical and experimental investigations of the oscillatory motion of thin plates in a still viscous fluid
A. Nuriev and O. Zaitseva
Implicit fluid-structure interaction analysis using realistic structural modeling for insect-like flapping wing
H. Cho, N. Lee, S-J. Shin and S. Lee
Numerical Interface Treatments for Weak and Strong Interaction in Conjugate Heat Transfer Problems
M.-P. Errera and R. Moretti
|
Design Topology, Optimization and Control I
|
TuM11
Room: Epsilon
Chair: to be confirmed
|
High fidelity aero-structural optimization of a wing using a step-range approach
P.F. Scaramuzzino, A. Siciliani and G. Quaranta
Addressing the non-linearity and singularity phenomena of stress-based optimal design of material microstructures
P.G. Coelho, G.M. Gonçalves, J.M. Guedes and J.B. Cardoso
Adjoint-based optimization of time-dependent fluid-structure systems using a high-order discontinuous Galerkin discretization
M.J. Zahr and P.-O. Persson
Sensitivity-enhanced NURBS-based optimisation of the TU Berlin Stator with geometric constraints
O. Mykhaskiv, R. Jesudasan and J.-D. Mueller
Development of an automated process for turbine blade optimisation
T. Uroic, B. Sojat and H. Jasak
Adaptative reduced order model to control non linear partial differential equations
M. Oulghelou and C. Allery
|
Coupled Problems in Thermo-Mechanics I
|
TuM12
Room: Suite 211
Chair: to be confirmed
|
Free-surface computation of steady-state flows constrained by unilateral contact using a fixed-point coupling approach
L. Fourment, S. Arora and U. Ripert
Modeling thermomechanical damage mechanisms of concrete
C. Pohl and J.F. Unger
Thermomechanically coupled crystal plasticity modeling of plastic deformation evolution in fully lamellar TiAl microstructures
J.E. Schnabel and S. Bargmann
An accurate solution of a singular thermoplastic problem of pressure-dependent plasticity
S. Alexandrov and W. Miszuris
Development of a time basis from Fast Fourier Transform and PGD modes to predict the behavior of polymer under cyclic loading
A. Takash, M. Beringhier, M. Hammoud and J.-C. Grandidier
|
Multiscale Problems II
|
TuM13
Room: Suite 213
Chair: to be confirmed
|
Incremental numerical homogenization of aging viscoelasticity in unsaturated porous microstructures
J.-L.D. Adia, J. Yvonnet, Q.-C. He, N.-C. Tran and J. Sanahuja
Accurate and efficient, multiscale simulations of Newtonian and non-Newtonian free-surface flows
J.L. Prieto and J. Carpio
Microscale electrical contact resistance analysis for resistance spot welding
T. Niho, K. Kubota, H. Aramaki, H. Kuramae, D. Ishihara and T. Horie
Phase-field modelling of ternary eutetic solidification in hot dip galvanization
J.P. Mogeritsch, A. Ludwig, B. Böttger, G. Angeli, C. Riener and R. Ebner
Two-scale hydro-thermo-mechanical analysis of heterogeneous materials and structures performed on clusters of pc
T. Krejčí, J. Kruis and T. Koudelka
Towards a better prediction of fruit dehydration: a multiscale hygro-mechanical model
K. Prawiranto, T. Defraeye, D. Derome and J. Carmeliet
|
|
|
10:30 - 11:00
Coffee Break
|
|
11:00 - 12:30
Plenary Lectures II
|
TuMP
Room: Delphi
Chair: Antonio Huerta
|
Advanced Coupled Models and Methods for Computational Respiratory Biomechanics
W. Wall, C.J. Roth, A. Birzle and L. Yoshihara
Macro- and microscopic simulation of additive manufacturing processes
F. Auricchio
|
|
12:30 - 13:30
Lunch Break
|
|
13:30 - 14:45
Plenary Lectures III
|
TuAP
Room: Delphi
Chair: Alfio Quarteroni
|
Embedded techniques for FSI problems
A. Larese, R. Rossi, R. Zorrilla, R. Wüchner and E. Oñate
A bottom-up phase-field approach for fracture based on all-atom simulations
B. Markert and S.P. Patil
Adaptive method for multiphase flow simulation with applications
T. Coupez
|
|
14:45 - 15:15
Coffee Break
|
|
15:15 - 17:15
TECHNICAL SESSIONS
|
IS - Advanced Models and Methods in CFD I
Invited Session organized by Simona Perotto, Annalisa Quaini and Gianluigi Rozza
|
TuE01
Room: Delphi
Chair: Annalisa Quaini
|
An immersed boundary lattice green‘s function method for external flows
G. Mengaldo, S. Liska and T. Colonius
Simulation of parachute inflation dynamics using an Eulerian computational framework for evolving fluid-structure interfaces in high speed turbulent flows
Z. Huang, C. Farhat and P. Avery
A higher-order position- and orientation-independent embedded boundary method for high Reynolds number turbulent flows
D. De Santis, C. Farhat and P. Avery
A numerical framework for enforcing a class of internal or boundary conditions in CFD and FSI computations
A. Morlot, Z. Huang and C. Farhat
Simulation of multiphase turbulent fluid and fluid structure interacion with adaptivity using FEniCS-HPC
T. Bakhos, D. Castanon Quiroz, J. Hoffman, J. Jansson, E. Krishnasamy, M. Moragues Ginard and L. Saavedra Lago
Massively parallel direct numerical simulations of bubbly flows
L. Silva, Z. Hassani, T. Coupez and H. Digonnet
Adaptive FEM for multiphase flows: towards physical couplings occurring in turbulent boiling
E. Hachem, M. Khalloufi, T. Toulorge, Y. Mesri and R. Valette
|
IS - Optimization in Coupled Problems I
Invited Session organized by Ole Sigmund and Kurt Maute
|
TuE02
Room: Salon Des Roses A
Chair: to be confirmed
|
High fidelity aeroelastic shape optimization of wind turbine blades using Vertex morphing method
Sh. Shayegan, R. Najian Asl, A. Ghantasala, R. Wüchner and K.-U. Bletzinger
Topology optimization of coupled thermo-mechanical problems with contact
K. Maute and J.L. Barrera Cruz
Density and gradient based topology optimization of acoustic-mechanical interaction using equivalent structural loads and acoustic sources from interpolated coupling matrices
J.S. Jensen
Methods for topological design of conducting networks
E.C. Cyr, G. von Winckel, D.P. Kouri, T.A. Gardiner and J.N. Shadid
Optimization of a structure under intense thermal radiation and its self-weight
N.J. Moreno Velez , M.A. Lopes de Matos Neves and H.F. Diniz Policarpo
Simplified flow models for topology optimization of thermofluidic devices
C. S. Andreasen, J. Alexandersen, J.J. Asmussen, X. Zhao, M. Zhou and O. Sigmund
|
IS - Iterative Methods for Coupled Field Problems II
Invited Session organized by Haim Waisman, Suvranu De and John N. Shadid
|
TuE03
Room: Salon Des Roses B
Chair: John N. Shadid
|
Robust and scalable multiphysics solvers for unfitted finite element methods
S. Badia and F. Verdugo
Preconditioning of a high-order, fully-implicit compressible flow solver for large- scale simulations of multi-physics processes in additive manufacturing
B. Weston, R. Nourgaliev, J.-P. Delplanque and A. Anderson
Algorithmic aspects and performance of AMG-based preconditioning for an implicit FE VMS resistive MHD model
P. Lin, J.N. Shadid, E.G. Phillips, J.J. Hu, P. Tsuji, E.C. Cyr, R.P. Pawlowski and D. Sondak
Multigrid for multiphysics using the MueLu framework
T.A. Wiesner, J.J. Hu and J.N. Shadid
Preconditioners for a full space model of coupled magma/mantle dynamics
S. Rhebergen and D. May
|
IS - Coupled Phase-Field Approaches II (15:15 - 15:55)
Invited Session organized by Bernd Markert
|
TuE04
Room: Athena
Chair: Yousef Heider
|
Multiphase-field modeling of martensitic phase transformation in an EBSD-based dual-phase microstructure
E. Schoof, D. Schneider, M. Selzer and B. Nestler
Introducing temperature into a phase field model for martensitic transformation - a coupled approach
S. Schmidt, C. Kuhn, Ralf Müller, Regina Müller, J. Meiser and H.M. Urbassek
|
IS - Coupled Problems in Advanced Energy Research (15:55 - 17:15)
Invited Session organized by Massimo Guarnieri and Federico Moro
|
TuE04
Room: Athena
Chair: Federico Moro
|
On forward and reverse coupling of vibrating piezoelectric energy harvesters
E. Bonisoli, N. Manca and M. Repetto
Modelling piezo-electric energy harvesters by a finite integration technique formulation for electro-mechanical coupled problems
F. Moro, D. Desideri, A. Doria, A. Maschio, C. Medé and L. Codecasa
3D Modelling of thermoelectric effect during solidification under magnetic field of Al-Cu alloys
Y. Du Terrail Couvat, O. Budenkova, R. Tarpagko, A. Gagnoud, L. Salvo and P. Lhuillier
Lattice-Boltzmann and Lagrange Particle Tracking methods based on porous medium X-ray Computed Tomography for analysing fluid dispersion in Flow Battery electrodes
D. Maggiolo, A. Trovò, F. Picano, F. Zanini, S. Carmignato and M. Guarnieri
|
IS - Coupled Problems of the Dynamics of the Solid Systems with Friction
Invited Session organized by A.V. Karapetyan and Alexey Kireenkov
|
TuE05
Room: Nafsika A
Chair: Alexey Kireenkov
|
How one can introduce compliance into computer models of the multibody dynamics using features of object-oriented modeling
I.I. Kosenko and M.E. Stavrovskiy
Coupled dynamics of solid system with slider-crank mechanisms as internal movers on rough surface with friction
S.V. Semendyaev
Improved theory of the combined dry friction in problems of aviation pneumatics’ dynamics
A.A. Kireenkov
On the effect of the anisotropic dry friction and the deformed state of tires on the shimmy initiation
S.I. Zhavoronok and A.A. Kireenkov
Motion of a cylinder rigid body interacting with point vortices
S.V. Sokolov
|
IS - Coupled Problems with Numerical and Physical Subdomain Interactions
Invited Session organized by Oreste Bursi and Nicola Tondini
|
TuE06
Room: Nafsika B
Chair: Giuseppe Abbiati
Co-Chair: Oreste Bursi
|
Self-tuning robust control system for real-time hybrid simulation with highly uncertain nonlinear physical substructure
A. Maghareh, S.J. Dyke and C.E. Silva
Coupling implicit multi-time step perfectly matched layers with FE explicit codes for seismic wave propagation in 2D unbounded domains
M. Brun, E. Zafati, S. Li and I. Djeran-Maigre
Numerical modelling of coupled thermo-hydraulic problems for long-term geothermal reservoir productivity
H.-P. Chen and M.D. Aliyu
Damped free motion of rocking specimens in non-linear time history response analysis
M. Inukai and T. Azuhata
Online/offline dynamic substructuring methods for the seismic characterization of coupled tank-piping system response
O.S. Bursi, G. Abbiati, R. Di Filippo and V. La Salandra
Hierarchical kriging for combining multi-fidelity hybrid and computational simulators
G. Abbiati, I. Abdallah, S. Marelli, B. Sudret and B. Stojadinovic
Partitioned algorithm for hybrid fire testing up to structural collapse
N. Tondini, G. Abbiati, O.S. Bursi and B. Stojadinovic
|
IS - Innovative Mathematical Modelers and Optimizers for Solving Single /Multi Disciplinary Problems in Applied Sciences
Invited Session organized by Jacques Periaux
|
TuE07
Room: Nefeli A
Chair: Jacques Periaux
|
Green Coupling of the Evolutionary Shape Optimization of a Natural Laminar Airfoil and a Shock Control Bump with Game Strategies
Y. Chen, Z. Tang, L. Zhang and J. Periaux
Mathematical models describing the interspecies transmission of disease
W. Fitzgibbon, J. Morgan and G. Webb
Minimising the constrained weight of frames coupling genetic algorithms with Nash strategies
D. Greiner, J. Periaux, J.M. Emperador, B. Galvan and G. Winter
|
IS - Direct and Inverse Methods for Cardiovascular and Pulmonary Biomechanics II (15:15 - 16:15)
Invited Session organized by Marek Behr, Wolfgang Wall and C. Alberto Figueroa
|
TuE08
Room: Nefeli B
Chair: C. Alberto Figueroa
|
Keynote Lecture: On a multiscale and multiphase model of function, perfusion and growth in human liver
T. Ricken, D. Werner and N. Waschinsky
Towards predictive simulation of artificial blood pumps
M. Behr, S. Hassler and L. Pauli
Coupling a cell calcium network with an arterial solid model
A. Coccarelli, D.H. Edwards, D. Parthimos and P. Nithiarasu
|
Coupled Problems in Bio-Medicine I (16:15 - 17:15)
|
TuE08
Room: Nefeli B
Chair: to be confirmed
|
Compact quasi newton coupling algorithm for high performance biomechanical applications
A. Santiago and M. Vázquez
A mechanobiological modeling of the endochondral ossification process: an experimental and computational analysis
J.J. Vaca-González, M. Moncayo-Donoso, J.M. Guevara, Y. Hata, S.J. Shefelbine and D.A. Garzón-Alvarado
A computational simulation of approach on patella development
K.M. Márquez-Flórez , S.J. Shefelbine and D.A. Garzón-Alvarado
|
Numerical Methods in Coupled Problems: Finite Difference, Particle Methods, Meshless Methods, etc. IV
|
TuE09
Room: Alpha
Chair: to be confirmed
|
HPC simulations of large flooding events: coupled 2D shallow water and 3D free surface navier-stokes models
N. Perovic, B.M. Ginting, R.-P. Mundani and E. Rank
Numerical stabilitiy of explicit and implicit co-simulation methods
P. Li, T. Meyer, D. Lu and B. Schweizer
A multirate decoupling scheme for transient coupled surface-subsurface flows
P. Chidyagwai
The influence of thermal barriers in anisotropic media applied to PCB using MEC
N.C. Anunciação Jr, T.S.L. Oliveira and C.T.M. Anflor
A robust deformation method for unstructured meshes subject to large boundary movements
T. Toulorge, M. Shakoor, M. Bernacki, P.-O. Bouchard, Y. Mesri and E. Hachem
Numerical stability of the fixed point iterative method to determine patterns of turbulent flow in a rectangular cavity with different aspect ratios
B. Bermúdez, A. Rangel-Huerta, D. Alanís and W.F. Guerrero S.
A new discret immersed boundary method for the simulation of fluid-structure interactions in openfoam
E. Constant, J. Favier, P. Meliga, E. Serre and M. Meldi
|
Coupled Problems in Fluid Structure Interaction IV
|
TuE10
Room: Gamma
Chair: to be confirmed
|
A multi-scale fracture framework for fluid structure interaction problems
S. Hewitt, L. Margetts, A. Shterenlikht and A. Revell
Drag coefficient of spherical particles in turbulent channel flow
Z. Chara, J. Dolansky and B. Kysela
Computational study of flow--induced oscillation of a simplified soft palate
M.E. Khalili, M. Larsson and B. Müller
Fluid-structure interaction of a rotor blade with friction contacts using a one-way coupled method
M. Lassalle and C.M. Firrone
|
Multiphysics Problems III
|
TuE11
Room: Epsilon
Chair: to be confirmed
|
How to drive a square flow in a liquid: acoustic stirring
V. Botton, T. Cambonie, B. Moudjed, S. Miralles, D. Henry and H. Ben Hadid
Elucidating multiscale, multiphysics coupled transport phenomena in polymer-electrolyte membranes
A. Crothers, C. Radke and A.Z. Weber
Dynamic recrystallization of Ti-based materials at crack surfaces at elevated temperatures - Hybrid cellular automata simulation
D.D. Moiseenko, P.V. Maksimov, S.V. Panin, V.E. Panin, D.S. Babich and S. Schmauder
Conjugate heat transfer calculations in a transformer
A. Skillen, R. Sawko, M. Zimon, S. Longshaw, C. Moulinec and D. Emerson
A finite element approach for a coupled numerical simulation of fluid-structure-electric interaction in MEMS
P. Chigahalli Ramegowda, D. Ishihara, T. Niho and T. Horie
Complex modeling of VVER-1000 using MCU-Athlet-FlowVision
R.B. Bahdanovich, E.V. Bogdanova, I.D. Gamtsemlidze, S.P. Nikonov and G. Tikhomirov
|
Coupled Problems in Thermo-Mechanics II
|
TuE12
Room: Suite 211
Chair: to be confirmed
|
Influence of welding parameters on the welding residual stresses
S. Gkatzogiannis, P. Knoedel and T. Ummenhofer
Thermodynamically consistent integration of thermoelastic solids using a temperature-based GENERIC framework
M. Schiebl, P. Betsch and C. Hesch
Coupled THM modelling of engineered barriers for the final disposal of spent nuclear fuel isolation
E. Toprak, S. Olivella and X. Pintado
Speed-up strategy for the analysis of FSW pin profile effect on torque and forces
N. Dialami, M. Cervera, M. Chiumenti and C. Agelet de Saracibar
Three-dimensional mesoscopic numerical study of effective thermal conductivity of cracked concrete
Q. Ren and L. Shen
Convective stability of a chemically reacting fluid in an annulus
I. Iltins, M. Iltina and A. Kolyshkin
|
Multiscale Problems III
|
TuE13
Room: Suite 213
Chair: to be confirmed
|
Fatigue crack growth in a compact tension specimen with heterogeneous medium using dual boundary elements method
M.H. Lisboa, A.A. Betancur and C.T.M. Anflor
Computational multiphysics 3D homogenization framework for the design of fast-curing dental composites
G. Agbobada, P.-O. Bouchard and Y. Tillier
Stress concentration in ultra-thin film coating with undulated surface profile
S.A. Kostyrko, H. Altenbach and M.A. Grekov
Ecient mesh generation of real concrete mesostructures from CT scan images using contrast enhancers
P. Carrara, R. Kruse, T. Leusmann, H. Budelmann and L. De Lorenzis
Adaptive fup finite volume method for groundwater flow modeling in highly heterogeneous porous media
H. Gotovac, L. Malenica, G. Kamber, B. Gotovac and V. Kozulic
|
|
|
20:30 - 23:30
Conference Banquet
|
|
Wednesday, June 14
|
09:00 - 11:00
TECHNICAL SESSIONS
|
IS - Advanced Models and Methods in CFD II
Invited Session organized by Simona Perotto, Annalisa Quaini and Gianluigi Rozza
|
WeM01
Room: Delphi
Chair: Gianluigi Rozza
|
An adaptive mesh refinement concept for viscous fluid-structure computations using Eulerian Vertex-based finite volume methods
R. Borker and C. Farhat
Coupled image processing and computational hemodynamics in a patient-specific Type B Aortic Dissection: a longitudinal study
H. Xu, M. Piccinelli, B. Leshnower, R. Nerem, W.R. Taylor and A. Veneziani
Novel Kinetic Consistent Algorithm for the modelling of incompressible conducting flows
B. Chetverushkin, N. D‘Ascenzo, A. Saveliev and V. Saveliev
Hierarchical isogeometric model reduction applied to data assimilation
Y.A. Brandes C. Barbosa, S. Perotto and A. Veneziani
Modeling under uncertainty of fluid flow and compaction processes at sedimentary basin scale
G. Porta, L. Tamellini and I. Colombo
Including topographic effects in shallow water modeling
E. Bachini, I. Fent and M. Putti
|
IS - Optimization in Coupled Problems II
Invited Session organized by Ole Sigmund and Kurt Maute
|
WeM02
Room: Salon Des Roses A
Chair: to be confirmed
|
Fluid-structure interaction design of insect-like micro flapping wing
D. Ishihara, N. Ohira, M. Takagi, S. Murakami and T. Horie
Adapting optimization procedures for the solution of coupled problems
A. Ghantasala, R. Najian Asl and K.-U. Bletzinger
Recent advances in the control of stresses by smart materials
J. Schoeftner, A. Brandl and H. Irschik
|
IS - Isogeometric Methods for Coupled Problems on Complex Geometries I
Invited Session organized by John A. Evans, Hector Gomez, Jessica Zhang and Hugo Casquero
|
WeM03
Room: Salon Des Roses B
Chair: to be confirmed
|
Keynote Lecture: Adaptive refinements in isogeometric simulations of thermo-mechanical problems using hierarchical splines
C. Anitescu, Y. Jia and T. Rabczuk
Coupling free-surface flow and mesh deformation in an isogeometric setting
S. Elgeti, F. Zwicke and S. Eusterholz
Isogeometric analysis and hierarchical Box Splines
F. Pelosi
Integrating CAD with Abaqus: A Practical Isogeometric Analysis Software Platform for Industrial Applications
J. Zhang
High-order tetrahedral mesh generation for cardiac simulations
S.M. Shontz, M. Stees, S. Dangi, D. Dang, C.A. Linte and N. Otani
Isogeometric methods for acoustic-structure interactions (ASI)
T. Kvamsdal, J.V. Venås and T. Jenserud
|
IS - High Performance Computing Software for Coupled Problems
Invited Session organized by Eric C. Cyr and Roger Pawlowski
|
WeM04
Room: Athena
Chair: Eric C. Cyr
|
Performance portable finite element discretization tools applied to plasma applications.
R.P. Pawlowski, E.C. Cyr, M. Bettencourt, E.T. Phipps, C.R. Trott, H.C. Edwards, J.N. Shadid, R. Kramer and A. Robinson
Optimizing the computational Rubik‘s cube: balancing numerics, performance, and abstractions in multimodel solvers
V. Mahadevan and L. Curfman McInnes
Coupling of Bio-Physical Brain Tumor Models With Medical Image Registration
K. Scheufele, M. Mehl, A. Gholami, A. Mang and G. Biros
High performance computing strategy for coupled multi-physics li-ion battery pack simulations
S. Allu, B.R. Trucksin, D.T. Lebrun-Grandie, M.A. Berrill, S.R. Slattery and J.A. Turner
Sharp treatment of multi-material interfaces in fluid dynamics
R. Nourgaliev, P. Greene and S. Schofield
Scalable high-order finite element discretization and solvers
J. Cerveny, V.A. Dobrev, T.V. Kolev and R.N. Rieben
|
IS - Coupled Problems in the Biomechanics of Bones and Arteries II
Invited Session organized by Zohar Yosibash
|
WeM05
Room: Nafsika A
Chair: Nir Trabelsi
Co-Chair: Zohar Yosibash
|
Keynote Lecture: Residual stresses resulting from growth and remodeling in arterial walls
D. Balzani and A. Zahn
Coupling 3D-imaging and high order numerical simulation of arteries
L. Kudela, S. Kollmannsberger, O. Yoseph, Z. Yosibash and E. Rank
Coupling CT images to non-homogeneous Timoshenko beams representing lumbar vertebrae
A. Kurfürst and C. Hellmich
|
IS - Advanced Modelling of Multi-physics Problems Involving Electric and Magnetic Effects
Invited Session organized by Antonio J. Gil
|
WeM06
Room: Nafsika B
Chair: Antonio J. Gil
|
A new framework for large strain electro-magneto-mechanics based on convex multi-variable strain energies: Conservation laws and hyperbolicity
A.J. Gil and R. Ortigosa
A computational framework for incompressible electro-mechanics based on convex multi-variable strain energies for geometrically exact shell theory
R. Ortigosa and A.J. Gil
Towards the computational design of soft magneto-electric composites
M. Rambausek and M.-A. Keip
A polyconvex computational formulation for electro-activation in cardiac mechanics
E. García-Blanco, A.J. Gil, R. Ortigosa and C.H. Lee
Non-linear transient simulation of coupled acousto-magneto-mechanical systems in MRI scanners.
S. Bagwell, P.D. Ledger and A.J. Gil
Complex plasticity model coupled with double damage curve in prediction of ductile fracture
F. Sebek, P. Kubík and J. Petruska
|
Coupled Problems in Bio-Medicine II
|
WeM07
Room: Nefeli A
Chair: to be confirmed
|
Influence of mechanical stimuli in growth plate morphological evolution during long bone development
H. Castro-Abril, J.M. Guevara, S.J. Shefelbine and D.A. Garzón-Alvarado
Predicting age-dependent changes in human native heart valves due to growth and remodeling
P.J.A. Oomen, C.C.V.C. Bouten, E. Kuhl and S. Loerakker
Coupled nanostructures of ribonucleic acids: developing discrete-continuum models for large time-scale simulations
S. Badu and R. Melnik
Simulations of fluid and rigid bodies interaction for biomechanics problems
C. Samaniego, G. Houzeaux and M. Vázquez
A phase-field method in full Eulerian framework for fluid-structure interaction in biological systems
X. Zheng and G. Karniadakis
Flow-structure interaction simulations of the aortic heart valve at physiologic conditions: the role of tissue constitutive model
A. Gilmanov, H. Stolarski and F. Sotiropoulos
|
IS - Control, Uncertainty Quantification, and ROMs in Coupled Problems
Invited Session organized by Hermann G. Matthies, Carlos Felippa, K. C. Park and Roger Ohayon
|
WeM08
Room: Nefeli B
Chair: Hermann G. Matthies
|
Reduced order model for fluid flow and transport of passive scalars in fluidized beds
S.R. Reddy, J. Chitale, P.G.A. Cizmas, G.S. Dulikravich, S. Gokaltun and D. McDaniel
Uncertainty quantification of coupled ODEs with stochastic Galerkin methods using adaptive higher order Runge-Kutta methods
J. Rang
Structure preserving Bayesian identification of a reduced order model for the control of the circular cylinder wake
N. Friedman, J. Vondrejc, R. Semaan and H.G. Matthies
Uncertainty analysis of the material properties of rock in hydrualic fracturing process
H. Garikapati, C.V. Verhoosel, E.H. van Brummelen and P. Dı́ez
|
Numerical Methods in Coupled Problems: Finite Difference, Particle Methods, Meshless Methods, etc. V
|
WeM09
Room: Alpha
Chair: to be confirmed
|
PFEM-FEM coupling for fluid-structure interaction problems involving free surfaces and large solid deformations
M.L. Cerquaglia, R. Boman, G. Deliége, L. Papeleux and J.-P. Ponthot
Modelling of flow of powders into closed cavities with consideration of air pressure conditions
H.S. Elmsahli, R. Baserinia and C. Sinka
State-constrained optimal control problems with bilinear state equation
M. Lass and A.C.T. Velasco
A coupled discrete-element model of fluid-saturated rock and the results of studying of the impact of a fluid on the shear strength of a rock under combined compression and shear
A.V. Dimaki, E.V. Shilko and S.G. Psakhie
Groundwater flow model in the karst aquifers using the fup finite volume approach
L. Malenica, H. Gotovac, G. Kamber, B. Gotovac and V. Kozulic
On couplings of the compressible and incompressible navier-stokes equations
F. Ghasemi and J. Nordstrom
|
Applications of Coupled Problems I
|
WeM10
Room: Gamma
Chair: to be confirmed
|
Tightly coupled computational fluid and crowd dynamics
R. Löhner, F. Camelli and E. Oñate
Modelling of industrial hybrid bonding processes considering fluid-structure-interaction
H. Fricke, T. Vallée and B. Mayer
Design and optimization of a multiphase microfluidic device for magnetic bead separation from biofluids
J. Gómez-Pastora, C. González-Fernandez, A. Basauri, M. Fallanza, E. Bringas and I. Ortiz
Computational analysis of a micro-solvent extraction process
A. Basauri, J. Gómez-Pastora, M. Fallanza, E. Bringas and I. Ortiz
Multiphysics analyses of the effect of package on the performances of PMUT transducers
R. Ardito, L. D‘Alessandro, G. Massimino, F. Procopio and A. Corigliano
|
Multiphysics Problems IV
|
WeM11
Room: Epsilon
Chair: to be confirmed
|
Coupling crystal plasticity and mass diffusion to study whisker formation in polycrystalline tin coatings
A. Chakraborty, P. Eisenlohr and P. Shanthraj
A comparative study of interface capturing methods with AMR for incompressible two-phase flows
O. Antepara, N. Balcázar and A. Oliva
Homogenization of the fluid-saturated piezoelectric porous metamaterials
E. Rohan, V. Lukeš and R. Cimrman
Using MD simulations for the poromechanical formulation of a hygromechanical behavior of a nanoporous biological cellular composite
D. Derome and J. Carmeliet
Computer modeling of coupled electromagnetic, temperature and magnetohydrodynamic fields in the induction heating and melting devices
V.B. Demidovich, I.I. Rastvorova, V.N. Timofeev, M.Y. Khatsayuk and A.A Maksimov
Computation methods and techniques for solution of coupled multiphysics problems in precision calculations of VVER type reactors
I. Saldikov, G. Tikhomirov, M. Ternovykh and A. Gerasimov
|
Coupled Problems in Thermo-Mechanics III
|
WeM12
Room: Suite 211
Chair: to be confirmed
|
Thermo-mechanical evolution of the consolidation of a prepreg tape: application to automated tape placement process
A. Barasinski, A. Leon and F. Chinesta
Two-scale finite element thermomechanical assessment of solid media thermal energy storage systems under operating conditions
F. Montero-Chacón
Aero-thermo-mechanical simulation of a labyrinth seal
J.-D. Garaud, G. Chaineray, T. Chantrait and C. Douta
Coupling thermal, electrical and metallurgical problems in modelling of induction surface hardening of steels
K. Bzowski, T. Wieczorek, J. Barglik, L. Rauch and M. Pietrzyk
Coupling thermal and metallurgical phenomena in description of mechanisms occurring during bainitic transformation in steels
L. Rauch, K. Bzowski and M. Pietrzyk
A one way coupled thermo-mechanical model to determine residual stresses and deformations in butt welding of two ASTM A36 steel plates
R. Franco, W.G. Loaiza, P.P. Lean and H. Yépez
|
Multiscale Problems IV
|
WeM13
Room: Suite 213
Chair: to be confirmed
|
Monitoring and lifetime prediction of PVC cables: methodology by multiscale and multidisciplinary approach
J. Tireau, R. Maurin, L. Yue, G. Marque, M. Ben Hassine, I. Mkacher, F. Djouani and X. Colin
Finite element modeling of effective properties of nanoporous thermoelastic composites with surface effects
A.V. Nasedkin, A.A. Nasedkina and A.S. Kornievsky
Estimation of micromechanical NiAl sintering model parameters from the atomistic simulations
M. Maździarz, J. Rojek and S. Nosewicz
|
|
|
11:00 - 11:30
Coffee Break
|
|
11:30 - 13:00
Plenary Lectures IV
|
WeMP
Room: Delphi
Chair: Bernhard Schrefler
|
Simulation of elasto-capillary interactions
E.H. van Brummelen, M. Shokrpour-Roudbari, K.G. van der Zee and G. Simsek
QN and RBF - Two universal coupling components and their efficient implementation
M. Mehl, F. Lindner, K. Scheufele and B. Uekermann
|
|
13:00 - 14:00
Lunch Break
|
|
14:00 - 16:00
TECHNICAL SESSIONS
|
IS - Advances in Computational Formulations and Solution Methods for Fluid and Kinetic Simulations of Plasma
Invited Session organized by John N. Shadid, Luis Chacon and Eric C. Cyr
|
WeA01
Room: Delphi
Chair: John N. Shadid
|
Advances in Eulerian Gyrokinetic Modeling of Tokamak edge plasmas
J. Hittinger, M. Dorr, P. Colella, D. Ghosh and M. Dorf
An optimal, fully implicit algorithm for the low-β two-fluid extended MHD model
L. Chacón and A. Stanier
A mixed-method b-field finite-element formulation for incompressible, resistive magnetohydrodynamics
J.H. Adler, T.R. Benson, E.C. Cyr, S.P. MacLachlan and R.S. Tuminaro
Implicit-explicit time integration of the Multi-Fluid Plasma Model using a continuous Galerkin spatial discretization
S. Miller, E.C. Cyr, J.N. Shadid, S. Conde and E.G. Phillips
Scalable and efficient solution of full maxwell electromagnetics - multifluid plasma systems by amg-based approximate block factorization preconditioners
J.N. Shadid, E.G. Phillips, E.C. Cyr, R.P. Pawlowski and S.A. Miller
iFP: An optimal, fully implicit, adaptive, equilibrium preserving and fully conservative Vlasov-Fokker-Planck code for spherical ICF simulations
W.T. Taitano, L. Chacón, A.N. Simakov and B. Keenan
Spectral methods for multi-scale plasma physics simulations (16:00 - 16:20)
G.L. Delzanno, G. Manzini, J. Vencels, S. Markidis and V. Roytershteyn
|
Design Topology, Optimization and Control II
|
WeA02
Room: Salon Des Roses A
Chair: to be confirmed
|
Crashworthiness optimization of an automotive front bumper
S. Boria
Topology optimization for engineering multifunctional cellular composites with elastic metamaterials
Z. Luo and J. Zheng
Global optimal design of two aerospace vehicles
A. Nastase
Design of controlled piezoelectric actuators by using topology optimization
M. Moretti and E.C.N. Silva
Prediction and optimization of the total yield strength in Al-alloys for non-uniform (local) heat treatments by coupling different software packages
T. Holzmann, A. Ludwig, A. Vakhrushev, E. Kozeschnik and R. Ebner
Conjugate heat transfer shape optimization based on the continuous adjoint method
K.T. Gkaragounis, E.M. Papoutsis-Kiachagias and K.C. Giannakoglou
|
IS - Isogeometric Methods for Coupled Problems on Complex Geometries II
Invited Session organized by John A. Evans, Hector Gomez, Jessica Zhang and Hugo Casquero
|
WeA03
Room: Salon Des Roses B
Chair: to be confirmed
|
Keynote Lecture: Shape optimization using CutFEM and CutIGA
E. Burman, D. Elfverson, P. Hansbo, M.G. Larson and K. Larsson
Shape-optimization of 2D hydrofoils using one-way coupling of an Isogeometric BEM solver with a boundary-layer model
K.V. Kostas, A.-A.I Ginnis, C.G. Politis and P.D. Kaklis
Non-matching interface treatment for isogeometric B-Rep analysis of light-weight, thin-walled structures coupled to LES
R. Wüchner, A. Apostolatos, G. De Nayer, M. Breuer and K.-U. Bletzinger
Isogeometric analysis for the thermo-mechanical coupling of twin screw expanders
A. Shamanskiy and B. Simeon
Isogeometric analysis two-fluid flow: towards correct energy evolution
I. Akkerman and M.F.P. ten Eikelder
Efficient preconditioning of hp-FEM matrices by hierarchical low-rank approximations
P. Gatto and J.S. Hesthaven
|
Mathematical Formulation of Coupled Problems
|
WeA04
Room: Athena
Chair: to be confirmed
|
Formal verification of coupling properties for an automotive software integration across XiL
N. Nagarajan, E. Ermis, A. Thuy and B. Holger Schlingloff
Variational methods for coupling nonlinear beams and continua
I. Romero
Thermomigration in SnPb solders
S. Schuß, C. Hesch and K. Weinberg
Coupling schemes for conjugate heat transfer for transient flight cycles
M. Lazareff and M.-P. Errera
The perturbation method in the problem on a nearly circular inclusion in an elastic body
M.A. Grekov and A.B. Vakaeva
Time-reversal methods for acousto-elastic equations and applications
F. Assous and M. Lin
|
Coupled Problems in Geomechanics I
|
WeA05
Room: Nafsika A
Chair: to be confirmed
|
Coupling of computational solid and fluid dynamics for the simulation of blasting operations in tunnels
F. Zarate, R. Löhner, J.M. Gonzalez, J. Miquel and E. Oñate
Multi-physics numerical model for the analysis of CO2 injection in carbonate rocks and its influence on hydraulic conductivity properties of porous media
V. Monteiro and D. Roehl
Simulation of stochastic soil consolidation using Dynamic Variability Response Functions
T. Manitaras and M. Papadrakakis
FE simulation of fluid-solid interaction in hydraulic fracturing
B. Chen, C.F. Li and D.R.J. Owen
Probabilistic analysis of a gas storage cavity mined in a spatially random rock salt medium
E. Mahmoudi, M. König and T. Schanz
|
Coupled Solution Strategies I
|
WeA06
Room: Nafsika B
Chair: to be confirmed
|
A generic framework for the partitioned solution of strongly coupled multifield problems
A. Düster, M. König and L. Radtke
Operator splitting approach for coupling stokes flow and nonlinear systems of ODEs
L. Carichino, G. Guidoboni and M. Szopos
Coupling flow and acoustic solvers with two different coupling approaches
N. Ebrahimi Pour, H. Klimach, V. Krupp, K. Masilamani and S. Roller
A coupled fem-sbfem approach for soil-structure-interaction analysis using non matching meshes at the nearfield farfield interface
M. Schauer and G.A. Ríos Rodríguez
Development of algorithmic strategies for numerical simulation of coupled mechanical-diffusion problems based on variational formulations
J. De Anda Salazar, T. Heuzé and L. Stainier
|
Coupled Problems in Bio-Medicine III
|
WeA07
Room: Nefeli A
Chair: to be confirmed
|
Patient-specific ventricular remodeling: a multiphase approach
G. Hopkins, S. Skatulla, L. Moj, T. Ricken, D. Werner and N. Ntusi
Modeling cell mechanics in flows using coarse-grained approach
K. Lykov and I.V. Pivkin
Coupled modeling for investigation of blast induced traumatic brain injury
X.G. Tan, R.N. Saunders and A. Bagchi
Design and Development of a Magnetically-driven Ventricular Assist Device (MVAD): in vitro implementation in the Fontan circulation
A. Das, A. Khoury, J. Johnston, C. Adams, K. Sverrisdottir, F. Madiyar, E. Divo, A. Nunez and A. Kassab
|
Coupled Problems in Electro-Magnetics I
|
WeA08
Room: Nefeli B
Chair: to be confirmed
|
Unsteady interfacial coupling of plasma and weldpool models
X. Yau, K. Dorogan and M. Médale
Hierarchical co-simulation interface for the simulation of transient effects in superconducting accelerator circuits
M. Maciejewski, B. Auchmann, L. Bortot, M. Prioli, A. Verweij, S. Schöps and I. Cortés Garcia
Fast iterative solution of Eddy current problems by a 3-D hybrid approach coupling the cell and the boundary element methods
F. Moro and L. Codecasa
Coupling Grad-Shafranov equilibrium solvers and grid generation to study plasma confinement properties in nuclear fusion devices
H. Guillard, A. Loseille and A. Loyer
A stable and efficient domain decomposition method for Maxwell’s equations with uncertainty.
A. Nissen, P. Pettersson and S. Tveit
A monolithic approach for the incompressible magnetohydrodynamic equations
K. Ata and M. Sahin
Heterogeneous deformation during electromagnetic ring expansion test
K. Yang, D. Chernikov, T. Sapanathan, R.N. Raoelison, V. Glushchenkov, N. Buiron and M. Rachik
|
Applications of Coupled Problems II
|
WeA10
Room: Gamma
Chair: to be confirmed
|
Coupled mechanical and electromagnetic modeling of Eddy current sensors
N. Jamia, M. Friswell, S. El-Borgi and P. Rajendran
Transient seepage into low-permeability highly deformable orthotropic media for infusion-based composites processing
J. Bruchon, N. Moulin and S. Drapier
Implementation of piezoelectric coupled electro-mechanical behavior for damage detection in engineering structures
T. Nestorović and N. Marković
A finite element analysis of the influences of ultrasonic welding parameters on temperature rise at interfaces of aluminum strands in wire bonding process
S. Mostafavi and B. Markert
Numerical simulation of droplet impact erosion : Dang Van fatigue approach
G. Coudouel, A. Combescure and J.-C. Marongiu
The method of long-life calculation for a friction couple “rotor – hybrid bearing”
R.N. Polyakov and L.A. Savin
|
|
|
16:00 - 16:30
Coffee Break
|
|
16:30 - 18:30
TECHNICAL SESSIONS
|
Coupled Problems in Geomechanics II
|
WeE05
Room: Nafsika A
Chair: to be confirmed
|
Hydromechanical analysis of a hydraulic fracturing problem
L.P. Morais, J.G.S. Saba and M.P. Cordão-Neto
Modelling of pressurised gas migration in HPHT fields adopting fully coupled flow and geomechanics
R. Quevedo and D. Roehl
Coupled geomechanical modeling using adaptive time stepping for implicit solution
S. Olivella
On the characteristics of slip instabilities in sheared granular layer
J. Carmeliet, O. Dorostkar, R. Guyer, C. Marone and P. Johnson
Computational method for fluid flow process in porous media with heterogeneity of permeability
E. Andriyanova and V. Astafev
Study on factors influencing safety of the cross section of viaduct and seawall on soft foundation
Yin Zhao and Xuan Wu
|
Coupled Solution Strategies II
|
WeE06
Room: Nafsika B
Chair: to be confirmed
|
On the coupled simulation of “Mud Motors”
R. Rossi, R. Zorrilla, V. Mataix, M.A. Celigueta, A. Larese, R. Gandikota and E. Oñate
A computationally efficient algorithm for strongly coupled multi-physics problems using a partitioned two-scale approach
A. Ghasemi, C. Waluga and B. Wohlmuth
Reduction of computation time by parallelization incorporating co-simulation techniques
J. Kraft and B. Schweizer
Solving an inverse coupled conjugate heat transfer problem by an adjoint approach
O.R. Imam-Lawal, T. Verstraete and J.-D. Mueller
|
Coupled Problems in Electro-Magnetics II
|
WeE08
Room: Nefeli B
Chair: to be confirmed
|
Mathematical modeling of magnetoelastic coupling
M. Harutyunyan and B. Simeon
Numerical investigation of flexible beams for electromagnetic energy harvesting under the wakes from upstream cylinder
S. Chawdhury and G. Morgenthal
Strong coupling in magnetorheological elastomers – analysis of microstructural and remnant magnetisation effects
K.A. Kalina, P. Metsch and M. Kästner
Optimal coupling of active interface for magneto-inductive harvester for shoes
E. Bonisoli, N. Manca and M. Repetto
On wave propagation in linear piezoelectricity with full electromagnetic coupling
A, Montanaro
Numerical studies on Electro Impulse De-Icing based on cohesive crack growth and adhesive debonding
H. Sommerwerk and P. Horst
|
Applications of Coupled Problems III
|
WeE10
Room: Gamma
Chair: to be confirmed
|
Transposition of a weighted AH-THROUGHPUT model to another LI-ION technology: is the model still valid? New insights on the mechanisms
N. Barnel, T. Delétang, S. Franger and L. Assaud
Coupled hygrothermal, electrochemical, and mechanical modelling for deterioration prediction in reinforced cementitious materials
A. Michel, M.R. Geiker, M. Lepech and H. Stang
Two-way coupling between a Finite-Volume solver with pressure-dependent rheology and a Lagrangian Particle Simulation for debris flow modelling
A. von Boetticher
Numerical simulation of tube-bundle flow-induced vibrations by using the LS-STAG immersed boundary method
V.V. Puzikova and I.K. Marchevsky
|
|