Full Technical ProgrammeSubject to changes. This version will be updated according to last-minute information. |
| Tuesday, September 3 |
|
|
14:00 - 15:00 Special Lectures Honoring Prof. Erwin Stein:
Ekkehard Ramm
Peter Wriggers
Herbert Mang
Tom Hughes | Tu03P Room: Verdi Chair: |
15:00 - 16:30 Plenary Session I | Tu04P Room: Verdi Chair: Antonio Huerta |
The Isogeometric Approach to Phase Field Modeling of Fracture T. Hughes |
Computational Nonlinear Solid Mechanics for complex loading histories P. Ladevèze |
|
|
| IS-New Approaches for Localization Problems Invited Session organized by Daniel Juhre and Konstantin Naumenko | TuE01 Room: Verdi Chair: Daniel Juhre |
Strain Gradient Theory and Fracture Mechanics R. Makvandi and D. Juhre Abstract |
Identifying the Non-local Interactions of Self-adhesive Polymeric Films with Digital Images of T-peeling B. Bagheri, K. Naumenko and H. Altenbach Abstract |
Fully Coupled Thermomechanical Analysis of Ni/PU Hybrid Foams Using Synchronised Digital Image Correlation and Infrared Thermography S. Diebels and A. Jung Abstract |
A Gradient-Extended Damage-Plasticity Model for Large Deformations: Theory and Numerical Aspects T. Brepols, S. Wulfinghoff and S. Reese Abstract |
Dynamic Necking Instabilities in Tension-Compression Asymmetric Materials Subjected to Plane Strain Extension: Theoretical Modelling and Finite Element Simulations K. E. N’souglo, J. A. Rodríguez-Martínez and O. Cazacu Abstract |
| IS-Theory of Fracture, Crack Propagation Criteria, and Crack Tracking Algorithms Invited Session organized by Anna Pandolfi and Michael Ortiz | TuE02 Room: Vivaldi 1 Chair: Anna Pandolfi |
A Multiscale Microstructure-informed Model of Distributed Fractures to Simulate Laboratory Tests on Rocks F. Calidonna, M. L. De Bellis, G. Della Vecchia, M. Ortiz and A. Pandolfi Abstract |
A Damage to Crack Transition Framework for Ductile Failure J. Leclerc, V. D. Nguyen and L. Noels Abstract |
An Explicit in Time Crack Tracking Algorithm based on a Viscous Regularization of the Quasi-static 3D Fracture Propagation Problem F. Fantoni, A. Salvadori and P. Wawrzynek Abstract |
Extensions of the Phase-field Fracture Modeling for Different Materials C. Bilgen and K. Weinberg Abstract |
On the Applicability of Linear Elastic Fracture Mechanics Scaling Relations in the Analysis of Intergranular Fracture of Brittle Polycrystals Z. Shabir, E. Van der Giessen, C. A. Duarte and A. Simone Abstract |
Minimisation and Ambrosio-Tortorelli approximation of the Griffith energy with Dirichlet boundary condition A. Chambolle and V. Crismale Abstract |
A Simplified Model for Intergranular Fracture Prediction S. Osovski, A. Needleman and A. Srivastava Abstract |
| IS-Virtual Element and Related Polygonal Methods for Inelastic Structural Applications Invited Session organized by Edoardo Artioli, Lourenco Beirao da Veiga, Robert Taylor and Peter Wriggers | TuE03 Room: Vivaldi 2 Chair: Edoardo Artioli |
Virtual Element Method Approach for 2D Fracture Mechanics Problems
Keynote Lecture E. Artioli, S. Marfia and E. Sacco Abstract |
Efficient 3D Virtual Elements for Finite Strain Thermo-plasticity B. Hudobivnik, F. Aldakheel and P. Wriggers Abstract |
A Virtual Element Approach for Micropolar Continua M. Pingaro, M. L. De Bellis and P. Trovalusci Abstract |
A Meshfree Nodal Integration Method for Elastic and Elastoplastic Applications using the Virtual Element Decomposition A. Ortiz-Bernardin, E. Artioli and R. Silva-Valenzuela Abstract |
A Unified Framework for Conforming and Nonconforming Virtual Element Methods for Elliptic and Parabolic Problems G. Manzini Abstract |
| IS-Applications of Computational Methods to Product and Process Design for Industry Invited Session organized by Shohei Kajikawa and Takashi Kuboki | TuE04 Room: Rossini 1 Chair: Takashi Kuboki Co-Chair: Takashi IIZUKA |
FE analysis on the Influence of Width Direction Deformation on Springback control in V-bending by Sheet Forging J. Zhu, W. Liu and T. Iizuka Abstract |
New Ductile Fracture Criterion for Prediction of Internal Fracture in Skew Rolling K. Yamane, K. Shimoda and K. Kuroda Abstract |
FE Analysis on Tube Hydroforming of Small Diameter ZM21 Magnesium Alloy Tube H. Yasui, T. Miyagawa, S. Yoshihara, T. Furushima, R. Yamada and Y. Itoh Abstract |
Analysis of Spinner Straightening utilizing the Finite Element Method T. Kuboki, K. Kawasaki, S. Kajikawa, H. Matsumura, T. Ono and H. Seimiya Abstract |
Modelling of Width Control for Hot Strip Mill with FEM Analysis M. Sekimoto, M. Sano and K. Ohara Abstract |
Finite Element Analysis of Tube Drawing Process with Diameter Expansion S. Kajikawa, H. Kawaguchi, T. Kuboki, I. Akasaka, Y. Terashita and M. Akiyama Abstract |
| IS-Computational Strategies for Metal Cutting & Forming Operations Invited Session organized by Miguel Vaz Jr. | TuE05 Room: Coral Chair: Miguel Vaz Jr. |
Computational Strategy for Machining Simulation of Large Aeronautical Aluminum Parts K. Mocellin and P. Rambaud Abstract |
Further Studies on Identification of Inelastic Parameters for Damaged Materials M. Vaz jr. and M. Tomiyama Abstract |
Plastic Instability Mechanisms due to Surface Imperfections in Largely Strained Metallic Materials B. Erice, M. J. Perez-Martin, D. Morin, T. Børvik and O. S. Hopperstad Abstract |
| IS-Multiscale Modeling of Concrete and Concrete Structures Invited Session organized by Herbert Mang and Bernhard Pichler | TuE06 Room: Diamant Chair: Herbert Mang |
Simulation-based Robust Design of Steel Fiber Reinforced Concrete Structures – Application to Segmented Tunnel Linings G. Meschke, G. E. Neu and V. Gall Abstract |
Advanced Geometric and Numerical Modelling of the Mechanical Behaviour of Concrete in Compression G. Mazzucco, B. Pomaro, G. Xotta, V. A. Salomoni and C. E. Majorana Abstract |
Verification of Serviceability Limit States of Reinforced Concrete Hinges T. Schlappal, J. Kalliauer, M. Vill, S. Gmainer, H. A. Mang, J. Eberhardsteiner and B. Pichler Abstract |
Computational Modeling of Damage Evolution in Short Fibre-reinforced Concrete due to Cyclic Loading V. Gudzulic, J. Timothy and G. Meschke Abstract |
Mesoscale FE Simulation of Concrete Submitted to Fatigue: Use of Strong Discontinuities Y. Sun, E. Roubin and J. B. Colliat Abstract |
Meso-scale Mechanical Tests and FE Modelling of Micro-Concrete O. Stamati, E. Roubin, E. Andò and M. Yann Abstract |
| IS-Length Scales in Plasticity and Fracture I Invited Session organized by Emilio Martínez-Pañeda, Benjamin Klusemann and Christian F. Niordson | TuE07 Room: Rossini 2 Chair: Emilio Martínez-Pañeda |
Keynote Lecture: Localization of Plastic Deformation and Size Effects A. Needleman Abstract |
Fractional Strain-Gradient Plasticity C. F. O. Dahlberg and M. Ortiz Abstract |
Apparent Anisotropy of Cubic Materials as a Function of Material and Boundary Value Problem Length-Scales C. Alleman Abstract |
A mixed Energetic/dissipative Higher-order Potential for Strain-gradient Plasticity under Non-proportional Loading A. Panteghini, L. Bardella and C. Niordson Abstract |
Influence of Portevin – Le Chatelier effect on ductile tearing: Experiments and simulations T. Morgeneyer, S. Ren, S. Forest, M. Maziere and G. Rousselier Abstract |
A Numerical Study of Sample Size Effects in Polycrystalline Metals S. Lucarini and J. Segurado Abstract |
| IS-Data-Driven Mechanics Invited Session organized by Elías Cueto , Francisco Chinesta and Pierre Ladeveze | TuE08 Room: Cristal Chair: Pierre Ladeveze |
Data-driven Modeling and Simulation of Biphasic Soft Material‘s Indentation C. Ghnatios, E. Cueto and F. Chinesta Abstract |
Thermodynamic Consistency of Data-driven Computational Mechanics D. Gonzalez, F. Chinesta and E. Cueto Abstract |
Data-Driven Structural Dynamics G. Quaranta, J. L. Duval, E. Cueto and F. Chinesta Abstract |
A Structure-based Data-driven Nonlinear Elastic Model based on WYPiWYG Hyperelasticity V. J. Amores Medianero, J. M. Benitez Baena and F. J. Montáns Leal Abstract |
Data-based Component Assessment and Identification of Constitutive Behavior K. Schulz, S. Kreis and H. Trittenbach Abstract |
| IS-Modeling of Plasticity and Damage Under Cyclic Loading Invited Session organized by Renato Natal Jorge | TuE09 Room: Tenerife Chair: |
Coupled Numerical Simulation of Low-Cycle Fatigue under Plane Stress Conditions K. Chatziioannou, Y. Huang and S. Karamanos Abstract |
Numerical Implementation of Bounding-Surface Model for Simulating Cyclic Inelastic Response of Metal Components G. Chatzopoulou and S. Karamanos Abstract |
Non-Linear Kinematic Hardening for Direct Cyclic Analyses with the STPZ B. Vollrath, H. Hübel and G. Stephan Abstract |
Experimental and Numerical study of 316H Stainless Steel under Thermo-mechanical Cyclic Loading Conditions T. Shimada, K. Tokuda and K. Yoshida Abstract |
Experimentation, modeling, and simulation of the deformation behavior of glassy polymers T. Barriere, S. Holopainen and X. Gabrion Abstract |
| Forming Processes I | TuE10 Room: Lanzarote Chair: Fernando Rastellini |
Thermo-Mechanical Analysis of Additively Manufactured Hybrid Extrusion Dies with Conformal Cooling Channels C. Bertoli, P. Stoll and P. Hora Abstract |
Experimental and Numerical Analysis of Bonding Criteria for Seam Welds During Aluminium Extrusion Processes of Hollow Profiles M. Crosio, D. Hora and P. Hora Abstract |
Finite Element Analysis of Residual Stresses in Large Cold-Rolled Threads J. Unglaub, H. Jahns and K. Thiele Abstract |
Numerical and Experimental Study on Mechanical Joining by a Hybrid Rolling Process C. Guilleaume and A. Brosius Abstract |
Comparison between phenomenological and entropy-based damage models in large strain machining J. Osorio-Pinzon, J. Casas-Rodriguez, S. Abolghasem and A. Marañon Abstract |
Non-linear model-predictive-control for thermomechanical ring rolling A. Brosius, M. Tulke and C. Guilleaume Abstract |
A Homogenization-Based Phase Field Approach to Fracture with Explicit Dependence on Local Crack Orientation Y. Shen, C. Cheng and Y. Liu Abstract |
| Damage, Fracture and Fatigue I | TuE11 Room: Orotava Chair: Miguel Angel Celigueta |
A Comparative Study of the Dynamic Fragmentation of Non-Linear Elastic and Elasto-Plastic Rings: the Roles of Stored Elastic Energy and Plastic Dissipation A. Vaz-Romero, S. Mercier, J. A. Rodríguez-Martínez and A. Molinari Abstract |
A Finite Strain Non-Isothermal Phase Field Model for Damage, Fracture and Fatigue in Elasto-Plastic Materials G. A. Haveroth, M. L. Bittencourt and J. L. Boldrini Abstract |
On the Use of Strain Localization Theory in Calibration of Fracture Models: an Application to High Strength Steels S. Bergo, D. Morin, T. Børvik and O. S. Hopperstad Abstract |
Analysis of the Impact of Plasticity on the Effective Toughness in Dynamic Fracture using the Phase Field Method G. Molnar, J. Réthoré, R. Seghir and A. Gravouil Abstract |
An Adaptive Global-Local Approach for Phase-Field Ductile Fracture F. Aldakheel, N. Noii, T. Wick and P. Wriggers Abstract |
Ductile Fracture Modeling with Bimodal Void Distribution and Transgranular Fracture in the Framework of Physically Based Polycrystalline Plasticity G. Rousselier Abstract |
Geometrically-Compatible Dislocation Patterns and Multiscale Crystal Plasticity S. Li Abstract |
| High Velocity Impact | TuE12 Room: Arona Chair: Francisco Zarate |
Smoothed Particle Hydrodynamics Modeling of High Velocity Impact on Thin Plates H. Frissane, L. Taddei, S. Meng, N. Lebaal and S. Roth Abstract |
Micro-mechanical Modelling of UHMW-PE Composites using Crystal Plasticity for Ballistic Performance Evaluation R. Varun Raj, R. H. J. Peerlings and V. S. Deshpande Abstract |
Numerical Modeling of Fragment and Blast Loaded Concrete Structures Using Massively-Parallel Coupled CFD-CSD Techniques O. Soto, M. Giltrud, J. Baum, R. Lohner and F. Togashi Abstract |
Eigenerosion for Reinforced Concrete under High Dynamic Loads Considering Viscoplasticity A. Qinami and M. Kaliske Abstract |
Numerical Simulation of Deformation and Failure Processes of a Complex Technical Object under Impact Loading E. Kraus and I. Shabalin Abstract |
A Comparative Analysis of Several Material Models in LS-DYNA at High Velocity Impact A. Bakulina and A. Buzyurkin Abstract |
|
| Wednesday, September 4 |
|
09:00 - 11:00 Plenary Session II | We02P Room: Verdi Chair: |
Semi-Lagrangian and Eulerian RKPM Shock Algorithms with Application to Explosive Welding Simulation J. S. Chen |
Numerical simulation of additive manufacturing processes: thermomechanical aspects M. Bellet |
Variational approach to topological optimization problems: closed-form solutions in a pseudo-time framework X. Oliver |
|
|
| IS-Model Order Reduction with Emphasis on Non-linear and Multi-scale Problems I Invited Session organized by Stefanie Reese and Marc Geers | WeM01 Room: Verdi Chair: Stefanie Reese Co-Chair: Marc Geers |
Construction of General Multiscale Methods Using Dimensionality Reduction and Domain Decomposition J. A. Hernández Abstract |
Model Order Reduction in Computational Mechanics Using Gaussian Process Regression M. Guo, Z. Zhang and J. S. Hesthaven Abstract |
An Adaptive Strategy for Model Order Reduction in Small Strain Elasto-Plasticity. Y. Özmen, P. Nigro, L. Scheunemann and J. Schröder Abstract |
Hybrid Hyper Reduction vs Hyper Reduction for Ratcheting Simulations Using Crystal Plasticity H. Farooq, D. Ryckelynck, S. Forest and G. Cailletaud Abstract |
Reduced-Order Modelling and Homogenisation in Magneto-Mechanics B. Brands, D. Davydov, J. P. Pelteret, J. Mergheim and P. Steinmann Abstract |
Identification and Model Reduction of Nonlinear Systems from Measured and Computed Data I. V. Gosea and A. C. Antoulas Abstract |
| IS-Computational Strategies for Modelling Material Failure: Enrichment, Regularization, Adaptivity Invited Session organized by Jose Cesar de Sa | WeM02 Room: Vivaldi 1 Chair: |
Simulations of Fracture at the Atomistic and Nano-Scales. D. Farkas Abstract |
Prediction of Cleavage Fracture in Fracture Mechanical Tests (SENB) Using an Modified Version of the Gurson-Tvergaard-Needleman Model (GTN) J. Langenberg, M. Könemann and S. Münstermann Abstract |
Gradient-Extended Damage Modeling with Reduced Integration-Based Continuum Elements O. Barfusz, T. Brepols and S. Reese Abstract |
A Numerical Study on Phase Field Diffusive Fracture Approach in Ductile Failure Analysis E. Azinpour, J. Cesar de sa and A. Santos Abstract |
Modelling interfaces with elastoplastic damage behavior using a dissipation controlled path-following constraint J. Wambacq, G. Lombaert and S. François Abstract |
| IS-Advanced Computational Modelling of Wood, Wood-based Products, and Timber Structures I Invited Session organized by Josef Füssl and Markus Lukacevic | WeM03 Room: Vivaldi 2 Chair: Markus Lukacevic |
Simulating fracture of real wood microstructures J. Carlsson and P. Isaksson Abstract |
High Strain Rate Out-of-Plane Compression of Birch Plywood, Effect of Humidity Content from Ambient to Cryogenic Temperatures V. Grolleau, B. Galpin, A. Penin and J. D. Capdeville Abstract |
Phase Field Method-Based Modeling of Fracture in Wood S. Pech, M. Lukacevic and J. Füssl Abstract |
Heat and Mass Transfer Model for Wood Under Real Climate Conditions M. Autengruber, M. Lukacevic and J. Füssl Abstract |
| IS-Multi-scale and Computational Scale Bridging I Invited Session organized by Varvara Kouznetsova, Kenjiro Terada and Jorg Schröder | WeM04 Room: Rossini 1 Chair: Varvara Kouznetsova |
Multi-scale Homogenization of Patterning Mechanical Metamaterials
KEYNOTE M. Geers, M. Ameen, O. Rokos and R. Peerlings Abstract |
Computational homogenization of polycrystalline materials with the Virtual Element Method M. Marino, B. Hudobivnik and P. Wriggers Abstract |
FE2 Evaluation of Stress Triaxiality / Lode Angle Dependencies of Void Growing Processes S. Nakamura, S. Suzuki, K. Matsui and T. Yamada Abstract |
Two-scale homogenization of nonlinear solids undergoing large deformations. O. Kunc and F. Fritzen Abstract |
Double-scale FEM modelling applied to clay rocks V. Dansereau, B. Pardoen, P. Bésuelle, S. Dal Pont and J. Desrues Abstract |
| IS-Computational Mechanics in the Presence of Uncertainties I Invited Session organized by Hermann Matthies and Bojana Rosic | WeM05 Room: Coral Chair: Jaroslav Vondrejc |
Computational Aspects of Upscaling of Material Models H. Matthies and A. Ibrahimbegovic Abstract |
A generalised framework for aleatory and epistemic uncertainties propagation using random set theory T. V. Hoang, B. Rosic and H. G. Matthies Abstract |
On Probabilistic Entropy Computatios in Selected Plasticity Problems M. Kamiński Abstract |
| IS-Multi-physics Simulation of Biomechanical Systems I Invited Session organized by Gerhard A. Holzapfel and Shawn C. Shadden | WeM06 Room: Diamant Chair: Gerhard A. Holzapfel Co-Chair: Jonas Stalhand |
Modeling Strain-Rate Dependency of Soft Fibrous Tissues with a Discrete Fiber Dispersion Method K. Li and G. A. Holzapfel Abstract |
Smooth Muscle Contraction: An Electro-Chemo-Mechanical Process J. Stalhand and B. Sharifimajd Abstract |
A Computational Study on the Scale-Dependence of Chemomechanical Signals in Soft Collagenous Tissues A. Stracuzzi, A. Wahlsten, E. Mazza and A. E. Ehret Abstract |
Three-dimensional Strain and Stress Distributions in Passive and Active States Accounting for Axial Residual Strain of Artery K. Takamizawa Abstract |
Computational Modeling of Molecular Interactions Between Slender Fibers for Challenging Problems in Biophysics M. J. Grill, C. Meier and W. A. Wall Abstract |
The Influence of the Cytoskeleton on the Vesicle-Mediated Cell Transport D. C. Haspinger, S. Klinge and G. A. Holzapfel Abstract |
| IS-Length Scales in Plasticity and Fracture II Invited Session organized by Emilio Martínez-Pañeda, Benjamin Klusemann and Christian F. Niordson | WeM07 Room: Rossini 2 Chair: Benjamin Klusemann |
Keynote Lecture: Efficient Numerical Implementation of Length-Scale Dependent Polycrystal Plasticity Theories P. Christodoulou, R. Lebensohn, I. Beyerlein and A. Needleman Abstract |
Hydrogen Embrittlement in Ni and fcc High Entropy Alloys W. Curtin, A. Tehranchi and X. Zhou Abstract |
From experiment to simulation and back – data science approaches for understanding plasticity and fracture S. Sandfeld Abstract |
A Phase Field Gradient Plasticity Model for Hydrogen Assisted Cracking E. Martínez-Pañeda, P. Kristensen and C. Niordson Abstract |
Size Effect in Advanced Materials for Aero Engines A. Raina Abstract |
| IS-Dislocation Mechanism Based Crystal Plasticity Theory, Computation and Experiment at Multi Scales Invited Session organized by Yinan Cui, Zhanli Liu and Zhuo Zhuang | WeM08 Room: Cristal Chair: Yinan Cui Co-Chair: fengxian Liu |
Computational 3-dimensional dislocation elastodynamics at shock loading Y. N. Cui, G. Po, Y. P. Pellegrini, M. Lazar and N. Ghoniem Abstract |
An FFT Based Strain Gradient Crystal Plasticity Study of Grain Boundaries S. C. Yamujala and A. K. Kanjarla Abstract |
A New method to investigate dislocation self-climb dominated by core diffusion F. Liu, E. Tarleton and A. C. F. Cocks Abstract |
A Discrete-to-Continuum Transition Strategy Towards Modelling Dislocation Pattern Formation Y. Zhu Abstract |
| IS-Limit Analysis and Plastic Collapse I Invited Session organized by Stanislav Sysala and Eva Hrubesova | WeM09 Room: Tenerife Chair: Stanislav Sysala Co-Chair: Eva Hrubesova |
Load Capacity Ratios of Perfectly Plastic Bodies and Structures R. Segev and L. Falach Abstract |
Limit Analysis and Inf-Sup Conditions on Convex Cones S. Sysala, J. Haslinger and S. Repin Abstract |
An algorithm for adaptive introduction and arrangement of velocity discontinuities within 3D finite-element-based upper bound limit analysis approaches and its application to cross laminated timber plates J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner and C. M. Martin Abstract |
A Procedure to Solve Friction Contact Problems in Limit Analysis F. C. Figueiredo, L. A. Borges, J. Silveira and N. A. Dimas Abstract |
High-Performance Interior Point Methods for Three-Dimensional Finite Element Limit Analysis N. Podlich, A. Lyamin and S. Sloan Abstract |
| Forming Processes II | WeM10 Room: Lanzarote Chair: Miguel Cervera |
The breakage prediction for hydro-mechanical deep drawing based on local bifurcation theory H. Lu, W. Huang, H. B. Yu and S. J. Qin Abstract |
Effects of Element Formulation on Pipe Bending Simulation S. Ishikawa and Y. Morita Abstract |
New approach for determination of strain rate sensitivity of mild steel DC01 under stack compression and uniaxial tensile tests P. Farahnak, M. Urbanek, M. Rund, J. DŽugan, S. Gerke and M. Brunig Abstract |
Correction of Residual Stresses from Measured Displacements in Springback Simulations V. Cabral and J. Muñoz Abstract |
Microstructure evolution in the severe plastic deformation processes: simulations using CPFEM K. Kowalczyk-Gajewska and K. Frydrych Abstract |
A Novel indicator for kinematic hardening effect quantification in deep drawing simulation R. Lafarge, N. Küsters and A. Brosius Abstract |
| Damage, Fracture and Fatigue II | WeM11 Room: Orotava Chair: Lucia Barbu |
A Computational Technique for Efficient Simulation of Structural Fatigue V. M. Kindrachuk and J. F. Unger Abstract |
Advances in the Simulation of High Cycle Fatigue using a Load-advance Strategy S. Jiménez, L. G. Barbu, S. Oller and E. Oñate Abstract |
Multi-temporal Space-time Integration for Dissipative Solids under Cyclic Failure Conditions J. Ulloa, G. Degrande and S. François Abstract |
Rolling Contact Fatigue Assessment Based on Cyclic Plastic Strain at the Microscale H. Mahdavi, K. Poulios, C. Niordson and Y. Kadin Abstract |
Study of the cyclic variability of the Taylor-Quinney coefficient using a thermo-viscoelastic-viscoplastic-damage model for thermoplastics A. Benaarbia, G. Chatzigeorgiou and F. Meraghni Abstract |
| Advanced Numerical Methods I | WeM12 Room: Arona Chair: Jiun-Shyan Chen |
Decomposition Method for Computational Limit Analysis N. Rabiei and J. Munoz Abstract |
A Hybrid High-Order Method for Finite Elastoplastic Deformations within a Logarithmic Strain Framework M. Abbas, A. Ern and N. Pignet Abstract |
The Brezis-Ekeland-Nayroles Minimization Principle with Mixed Finite Element Method for Elastoplastic Dynamic Problems X. Cao, A. Oueslati, A. D. Nguyen, M. Stoffel, B. Market and G. de Saxcé Abstract |
Mixed FE Formulation for Modelling Incompressible Damage with Thermo-Mechanical Coupling C. A. Moreira, G. B. Barbat, M. Chiumenti and M. Cervera Abstract |
Development of New Implicit Discrete Element Analysis Method Based on Finite Deformation Theory S. Suzuki, K. Terada, S. Moriguchi and N. Takeuchi Abstract |
Enhanced Embedded Strong Discontinuity Quadrilateral for Dynamic Crack Propagation A. Stanić, B. Brank, A. Ibrahimbegovic and H. G. Matthies Abstract |
|
14:30 - 16:30 Plenary Session III | We06P Room: Verdi Chair: |
Model-Free Data-Driven Computational Mechanics (and III): Analysis, Solvers, Data Identification and Data Management M. Ortiz |
Single Arm Dislocation Source Mechanism-based Flow Stress and Computation of Crystal plasticity at Submicron Scale Z. Zhuang |
The Finite Cell Method: A High order immersed boundary method for large scale nonlinear problems E. Rank |
|
|
| IS-Model Order Reduction with Emphasis on Non-linear and Multi-scale Problems II Invited Session organized by Stefanie Reese and Marc Geers | WeE01 Room: Verdi Chair: Stefanie Reese Co-Chair: Marc Geers |
Computational Homogenization with Numerical Model Reduction of a Poro-viscoplastic Medium R. Jänicke, F. Larsson and K. Runesson Abstract |
Reduced Finite Element square techniques (RFE2 ): towards industrial multiscale FE software O. Lloberas-Valls, M. Raschi and J. Oliver Abstract |
An adaptive approach of proper orthogonal decomposition to capture non-linearities with a small number of modes S. Kastian and S. Reese Abstract |
A New non-intrusive data-driven computational homogenization for multi-parametric studies N. Blal and A. Gravouil Abstract |
Optimization clustering technique for PWUTFA homogenization of viscoplastic composites G. Alaimo, F. Auricchio, S. Marfia and E. Sacco Abstract |
| IS-Modeling of Structural Impact and Crashworthiness Invited Session organized by Hakim Naceur | WeE02 Room: Vivaldi 1 Chair: |
Multiscale modeling of the mechanical behavior of the human humerus under low velocity impact J. Rahmoun, P. Drazetic and C. Fontaine Abstract |
Deformable Discrete Element Method in Application to Dynamic Behavior and Fracture of Brittle and Ductile Materials A. Zubelewicz Abstract |
Numerical modeling of the low-velocity impact of composite structures using the peridynamics R. Bai, H. Naceur, D. Coutellier and A. Laksimi Abstract |
SPH modeling of high velocity impact on thin plates H. Frissane, L. Taddei, S. Meng, N. Lebaal and S. Roth Abstract |
Numerical modeling of the dynamic response of high voltage components in electric cars S. Ridene, S. Hampel, D. Coutellier and H. Naceur Abstract |
| IS-Advanced Computational Modelling of Wood, Wood-based Products, and Timber Structure II Invited Session organized by Josef Füssl | WeE03 Room: Vivaldi 2 Chair: Josef Füssl |
Modelling of wood under compression perpendicular to the grain with rolling shear in cross-laminated timber S. T. Akter, T. K. Bader and E. Serrano Abstract |
Fracture simulations of wooden boards with knots as a basis for timber engineering design concepts M. Lukacevic, J. Füssl and J. Eberhardsteiner Abstract |
A Numerical approach towards the understanding of climate-induced fracture in oak wood R. A. Luimes and A. S. J. Suiker Abstract |
Nonlocal Three-Dimensional Continuum Damage Model for Failure Analysis of Timbers A. Karimi-Nobandegani and H. Valipour Abstract |
| IS-Multi-scale and Computational Scale Bridging II Invited Session organized by Varvara Kouznetsova, Kenjiro Terada and Jorg Schröder | WeE04 Room: Rossini 1 Chair: Kenjiro Terada |
Preconditioning and error estimation for spectral homogenization solvers
KEYNOTE J. Zeman, M. Ladecký, I. Pultarová and J. Vondřejc Abstract |
Efficient spectral solver for crystal plasticity simulation T. Junge and F. Maresca Abstract |
A Variational Framework for Thermo-Mechanical Coupled Two-Scale Boundary Value Problems S. Matsubara and K. Terada Abstract |
Enriched Continuum Formulation based on Computational Homogenization for Transient Diffusion Problems. A. Waseem, T. Heuzé, L. Stainier, M. G. D. Geers and V. G. Kouznetsova Abstract |
Nonperiodic multiscale problems: Some recent numerical advances F. Legoll Abstract |
| IS-Computational Mechanics in the Presence of Uncertainties II Invited Session organized by Hermann Matthies and Bojana Rosic | WeE05 Room: Coral Chair: Hermann Matthies |
Bayesian parameter estimation for highly nonlinear problems in solid mechanics J. Vondřejc and H. G. Matthies Abstract |
Influence of the autocorrelation structure on stochastic results A. Fau, M. M. Dannert, R. M. N. Fleury and U. Nackenhorst Abstract |
Stochastic damage process for fatigue analysis W. Zhang, A. Fau, U. Nackenhorst and R. Desmorat Abstract |
Parameter Identification for a Viscoplastic Model with Damage using Bayesian Approaches E. Adeli, B. Rosic and H. Matthies Abstract |
| IS-Multi-physics Simulation of Biomechanical Systems II Invited Session organized by Gerhard A. Holzapfel and Shawn C. Shadden | WeE06 Room: Diamant Chair: Daniel Christopher Haspinger Co-Chair: Gerhard A. Holzapfel |
A Crack Phase-field Model to Analyze Aortic Dissections G. A. Holzapfel, O. Gültekin, S. Priska Hager and H. Dal Abstract |
Biomechanical Model of the Lower Urinary Tract as Ancillary Tests to Urodynamic Studies D. Oliveira, M. Parente and R. Natal Abstract |
Multi-physics Simulation of Human Intervertebral Disc Degeneration and Repair W. Gu, Q. Zhu and X. Gao Abstract |
Optimization-based Comparison of Different Approaches for the Automatized Calculation of Residual Stresses and Fiber Orientations in Arteries A. Zahn and D. Balzani Abstract |
Modeling disease-dependent degradation of elastin during aortic dissection. M. Rolf-Pissarczyk, K. Li and G. A. Holzapfel Abstract |
Development of a Personalized Computational Model to Simulate Pelvic Organ Prolapse E. Silva, M. Parente, T. Mascarenhas, R. Natal Jorge and A. Augusto Fernandes Abstract |
| IS-Length Scales in Plasticity and Fracture III Invited Session organized by Emilio Martínez-Pañeda, Benjamin Klusemann and Christian F. Niordson | WeE07 Room: Rossini 2 Chair: Emilio Martínez-Pañeda |
Keynote Lecture: Finite deformation Mesoscale Field Dislocation Mechanics R. Arora, X. Zhang and A. Acharya Abstract |
General Theory of the Kanzaki Force Field B. Gurrutxaga-Lerma Abstract |
Striking Simplicity of Dislocation Dynamics. Implications to Thermodynamics of Plasticity V. Berdichevsky Abstract |
Analysis of Strain Localization Near a Blunting Crack Tip Using a Higher-Order Gradient Crystal Plasticity Theory M. Kuroda Abstract |
Structural Evolution of Metals during Adiabatic Shear Banding C. Bronkhorst, C. Lieou, T. Jin and H. M. Mourad Abstract |
A Continuum Model for the Prediction of Diffusional Creep in Metallic Polycrystalline Aggregates at high Temperatures M. Magri, G. Lemoine, L. Adam and J. Segurado Abstract |
| Additive Manufactured Materials | WeE08 Room: Cristal Chair: Michele Chiumenti |
Modelling Additively Manufactured Columnar IN 718 on the Meso- and Macroscale A. Kergassner, J. Mergheim and P. Steinmann Abstract |
Coupled Phase Field – Crystal Plasticity Model for Microstructure Evolution and Deformation in Additively Manufactured Metallic Alloys K. Joshi, S. S. Quek and D. Wu Abstract |
Anisotropic Polycrystal Plasticity due to Microstructural Heterogeneity in Additively Manufactured Metallic Parts: Experimental Investigation and Crystal Plasticity Simulation S. A. H. Motaman, P. Köhnen and C. Haase Abstract |
Anisotropic mechanical behaviour of SLM manufactured Ti-6Al-4V simulated with crystal plasticity K. Somlo, K. Poulios and C. Niordson Abstract |
Virtual 3D-Printing of Soft Polymers for Neural Implants C. Weißenfels and P. Hartmann Abstract |
Towards mechanically realistic 3D printed arterial replicas J. Živić, Z. Tomić, T. Škugor, M. Smoljkić and I. Karšaj Abstract |
| IS-Limit Analysis and Plastic Collapse II Invited Session organized by Stanislav Sysala and Eva Hrubesova | WeE09 Room: Tenerife Chair: Stanislav Sysala |
Application of Numerical Modelling to the Comprehensive Analysis of Slope Stability E. Hrubesova, N. Rapantova and P. Pospisil Abstract |
Extensions of shakedown analysis for materials with density and size effects C. Ruiz, F. Schatz and J. Silveira Abstract |
Non-Associative Plasticity Models for Structural Inistability Calculations in Thick-Walled Metal Shells A. Nasikas, S. Karamanos and S. A. Papanicolopulos Abstract |
A Quasi-Static Nonlinear Analysis for Assessing the Fire Resistance of 3D Frames Exploiting Time-dependent Yield Surfaces D. Magisano, F. Liguori, L. Leonetti, D. de Gregorio, G. Zuccaro and G. Garcea Abstract |
| IS-Evolving Microstructures in Solids Invited Session organized by Laurent Stainier | WeE10 Room: Arona Chair: Laurent Stainier Co-Chair: Joern Mosler |
Modelling the coupling between plastic activity and allotropic transformation in iron N. Bruzy, M. Coret, B. Huneau and L. Stainier Abstract |
Mean-field homogenization based constitutive modeling of Austenitic TRIP-steels at the single crystal scale. S. Prüger and B. Kiefer Abstract |
Nonlinear Constitutive Modelling of Plastic Strain-Induced Martensitic Transformation in Austenitic Stainless Steels at Cryogenic Temperatures P. Fernández-Pisón, J. A. Rodríguez-Martínez and S. Sgobba Abstract |
On the variational formulation of Cahn-Hilliard-type phase field theory coupled to mechanics J. Mosler Abstract |
| Damage, Fracture and Fatigue III | WeE11 Room: Orotava Chair: Kenjiro Terada |
A Seamless Transition Method from Continuity to Discontinuity for Crack in an Elasto-Plastic Material Y. Shintaku, K. Terada and S. Tsutsumi Abstract |
Ductile Failure by Strain Localization in Steels D. Morin, L. E. Dæhli, T. Børvik, A. Benallal and O. S. Hopperstad Abstract |
Atomistically motivated interface modeling to account for coupled plasticity and damage S. Reese, S. Rezaei, T. Brepols, M. Fassin and S. Wulfinghoff Abstract |
3D Dynamic Crack Simulation with Extended Finite Element Method. T. Lyu, S. Löhnert and P. Wriggers Abstract |
Unified formulation of a cohesive interface model for fracture, fatigue and creep in materials I. Scheider and C. J. Cyron Abstract |
Numerical analyses of localisation in steel subjected to non-proportional loading M. Kristoffersen, D. Morin, O. S. Hopperstad and T. Børvik Abstract |
| Composites I | WeE12 Room: Lanzarote Chair: Xavier Martinez |
Mechanical and fully coupled thermomechanical FE2 homogenization framework for dissipative periodic composite structures G. Chatzigeorgiou, E. Tikarrouchine, Y. Chemisky and F. Meraghni Abstract |
Transformation Field Analysis and Mori-Tanaka model for viscoelastic-viscoplastic composites with coated inclusions F. Meraghni, M. Barral, G. Chatzigeorgiou and R. Leon Abstract |
Modeling Anisotropic and Rate-Dependent Plasticity in Short-Fiber Reinforced Thermoplastics A. Amiri-Rad, L. V. Pastukhov, L. E. Govaert and J. A. W. van Dommelen Abstract |
On the Evolution of the Elastic Anisotropy of Fiber Reinforced Materials During Yielding O. Stahn, W. H. Müller and A. Bertram Abstract |
Elaboration and characterization of the thermo-mechanical properties of MWCNTs/PP composites by twin-screw mixe S. Mohammed and T. Barriere Abstract |
| Thursday, September 5 |
|
09:00 - 11:00 Plenary Session IV | Th02P Room: Verdi Chair: |
Multiscale Modelling and Analysis of Multi-phase Alloys F. Pires |
Exploration of predictive disaster simulations by FEM and MPM K. Terada |
Simulation of Fracture Processes using the Virtual Element Method P. Wriggers |
|
|
| Damage, Fracture and Fatigue IV | ThM01 Room: Verdi Chair: Ignacio Carol |
A Zero-Thickness Mortar / Interface Formulation with Application to Fracture Mechanics I. Carol and M. de Francisco Abstract |
New developments in the application of configurational mechanics to crack propagation L. Crusat, I. Carol and D. Garolera Abstract |
Fracture mechanisms of dual-phase steels exhibiting a platelet-like microstructure K. Ismail, L. Brassart, A. Perlade, P. J. Jacques and T. Pardoen Abstract |
A multicomponent kinematic hardening model with sequential distortional hardening R. Marek, J. Plesek and Y. F. Dafalias Abstract |
Theoretical and computational framework for the prediction of fracture energy in brittle and ductile materials in presence of hydrogen E. Elmukashfi and A. Cocks Abstract |
| IS-Computational Modeling of Material Forming Processes I Invited Session organized by Jean-Philippe Ponthot, Carlos Agelet de Saracibar, Lionel Fourment and Robertt Valente | ThM02 Room: Vivaldi 1 Chair: Carlos Agelet de Saracibar |
Analysis of Damage and Fracture Mechanisms in Ductile Metals under Non-proportional Loading Paths
Keynote Lecture M. Brünig, S. Gerke and M. Zistl Abstract |
Thermomechanical Simulation of Blanking Process C. Canales, R. Boman and J. P. Ponthot Abstract |
About Contact Treatment for a Velocity-Based Steady-State Formulation of Metal Forming Problems L. Fourment, S. Arora, P. Montmitonnet and K. Mocellin Abstract |
Investigation of localized necking in substrate-supported metal layers using flow theory of plasticity, deformation theory and crystal plasticity: bifurcation versus imperfection analysis M. Ben Bettaieb and F. Abed-Meraim Abstract |
Thermo-Mechanical Simulation of Copper Coated with Nickel-Based Alloy Expansion C. Tahri, C. Bertoni, H. Klocker, E. Feulvarch and J. M. Bergheau Abstract |
| IS-Computational Plasticity of Heterogeneous Solids I Invited Session organized by Ankit Srivastava and Alan Needleman | ThM03 Room: Vivaldi 2 Chair: Ankit Srivastava |
3D Cavitation Instabilities Using a Non-Quadratic Anisotropic Yield Function B. N. Legarth and V. Tvergaard Abstract |
A Continuum Model for Microscale Bone Plasticity T. Siegmund, M. A. Hammond, M. R. Allen and J. M. Wallace Abstract |
Crack Propagation in an Interface Between an Elastic Substrate and a Visco-Plastic Crystalline Material Considering Mixed Mode Loading G. Fornel, R. Moresco, E. Braun, C. Almeida and E. Bittencourt Abstract |
Modeling Metal Plasticity Induced by Contact Loading S. Venugopalan and L. Nicola Abstract |
Plasticity and Damage in 3D Non-Woven Carbon Fibre Reinforced Composites V. Deshpande, L. Meza, S. Kazemahvazi, J. Schormans and J. Remmers Abstract |
| IS-Multi-scale and Computational Scale Bridging III Invited Session organized by Varvara Kouznetsova, Kenjiro Terada and Jorg Schröder | ThM04 Room: Rossini 1 Chair: |
Effect of Strain Induced Crystallization on the Fracture Behavior of Rubber-Like Materials C. Linder, P. Arunachala and R. Rastak Abstract |
Atomistic-to-Continuum Coupling for Structural Glasses Using the Energy-Landscape Picture G. G. Vogiatzis, M. Semkiv, L. C. A. van Breemen and M. Hütter Abstract |
Decoupled two-scale analysis of fiber reinforced plastics subjected to curing process R. Saito, Y. Yamaguchi, S. Matsubara, S. Moriguchi and K. Terada Abstract |
Inverse estimation of local elastoplastic properties using nano-indentation for microstructure modeling K. Goto, I. Watanabe and T. Ohmura Abstract |
Low and High Frequencies Wave Propagation in Discrete Periodic Media Based on the Dynamic Expressions of Forces and Moments M. Ayad, H. Reda, J. F. Ganghoffer, N. Karathanasopoulos and H. Lakiss Abstract |
Method of Multiscale Virtual Power in the modelling of micro-discrete/macro-continuum transition. Application to the modelling of graphene and boron nitride Q.K. Hoang and E.A. de Souza Neto |
| IS-Numerical Modelling of Non-standard Cementitious Materials I Invited Session organized by Iulia Mihai and Anthony Jefferson | ThM05 Room: Coral Chair: Anthony Jefferson |
Improved Prediction of Shrinkage for Overlay Concrete P. Gamnitzer, A. Brugger, M. Drexel and G. Hofstetter Abstract |
Modelling of fibre reinforced cementitious composites using elements with embedded discontinuities. P. Bonilla-Villalba, I. Mihai and A. D. Jefferson Abstract |
Numerical simulation of coupled crack-matrix flow of a healing agent in cementitious materials B. Freeman and A. Jefferson Abstract |
Numerical and Experimental Investigation into Crack Localization in Fibre Reinforced Cementitious Composites I. Mihai, A. Bains and P. Grassl Abstract |
A Multiscale Approach to Predict Diffusion Properties in New Cement Based Materials: Effects of Different Recycled Aggregates A. Abou Chakra, A. Turatsinze and G. Escadeillas Abstract |
| IS-Prediction and Utilization Process-induced Residual Stresses I Invited Session organized by Markus Kästner | ThM06 Room: Diamant Chair: Markus Kästner Co-Chair: Lisa Scheunemann |
Residual Stresses in Duplex Steels: Mean Field Modelling and Characterization H. Erdle, A. Dyck, T. Böhlke, N. Simon and J. Gibmeier Abstract |
Macro- and micromechanical investigations on residual stresses in extruded components P. Landkammer and P. Steinmann Abstract |
Macroscopic FE-simulation of residual stresses in thermo-mechanically processed steels considering phase transformation effects B. A. Behrens, A. Chugreev and C. Kock Abstract |
Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts. S. Uebing, L. Scheunemann, D. Brands and J. Schröder Abstract |
Property Improvement of Austenitic Disc Springs Through Targeted Adjustment of Residual Stresses by Means of Incremental Sheet Forming R. Hajavifard, F. Maqbool, M. Bambach and F. Walther Abstract |
| IS-Length Scales in Plasticity and Fracture IV Invited Session organized by Emilio Martínez-Pañeda, Benjamin Klusemann and Christian F. Niordson | ThM07 Room: Rossini 2 Chair: Emilio Martínez-Pañeda |
Keynote Lecture: On the Effect of Grain Boundaries on the Strength of Polycrystals: Hall-Petch Revisited S. Haouala, S. Lucarini, J. Segurado and J. LLorca Abstract |
Predicting the Finite Strain Behavior of 3D Non-Woven Orthogonally Oriented Composites Using Crystal Plasticity Modeling L. R. Meza, J. M. J. Schormans, J. J. C. Remmers and V. S. Deshpande Abstract |
Modelling the Role of Texture on Cyclic Deformation in FCC Metals E. Kakandar, G. M. Castelluccio and C. Keller Abstract |
Gradient crystal plasticity models with a natural length scale at the slip-rate gradient in the hardening law. M. Ryś and H. Petryk Abstract |
Size-Dependent Homogenized Model for Isotropic Porous Materials J. Hure and J. M. Scherer Abstract |
| Multi-Scale Materials Models I | ThM08 Room: Cristal Chair: Miguel Angel Celigueta |
Multi Scale Computational Modelling of Closed Cell Metallic Foams with Microstructural Morphological Control Using Consistent 3D and Shell RVEs A. Ghazi, P. Berke, K. Ehab Moustafa Kamel , B. Sonon, C. Tiago and T. Massart Abstract |
Overall Elastoplastic Property for Strain Gradient Staggered Biostructure H. Ma Abstract |
Predicting Plastic Strain Anisotropy of AA6016-T4 and DC05 by Multiobjective Parameter Calibration of Crystal Plasticity Models and Coupling Strategies with Macroscopic Models S. Hirsiger, B. Berisha, H. Hippke and P. Hora Abstract |
A Neural Network Based Homogenization Approach A. Fuchs, F. Leichsenring and M. Kaliske Abstract |
Numerical Analyses of Micro- to Macroscopic non-Uniform Deformation During Plane Strain Compression Using Second-Order Homogenization Method M. Sakamoto, T. Otsuka and M. Uchida Abstract |
| Advanced Materials Models I | ThM09 Room: Tenerife Chair: Riccardo Rossi |
Some Numerical Verification Examples for Plane Stress Elasto-Viscoplasticity A. Brezolin, T. dos Santos, P. Rosa and R. Rossi Abstract |
Strain localization analysis of Hill‘s orthotropic elastoplasticity: Analytical and numerical appraisal S. Kim, M. Cervera, M. Chiumenti and J. Y. Wu Abstract |
A Finite Strain Thermo-Mechanically Coupled Material Model for Semi-Crystalline Polymers, Incorporating Crystallisation Kinetics S. Felder, H. Holthusen, S. Hesseler, F. Pohlkemper, J. W. Simon, T. Gries and S. Reese Abstract |
Crystal Plasticity Finite Element Modelling of Coarse-Grained α-Uranium N. Grilli, E. Tarleton, J. Askew and A. C. F. Cocks Abstract |
Thermo-Viscoplasticity for Case Hardening Steels at Finite Deformations and Wide Temperature Ranges P. Oppermann, R. Denzer and A. Menzel Abstract |
Three-level Model of Inelastic Deformation with the Description of Structural Superplasticity Regime A. Shveykin, P. Trusov and E. Sharifullina Abstract |
| IS-Meshfree, Particle, and Peridynamic Methods Invited Session organized by Jiun-Shyan Chen, Pablo Seleson and Michael Hillman | ThM10 Room: Lanzarote Chair: Michael Hillman |
Recent Advances in IGA-Meshfree Methods for Extreme Events Y. Bazilevs Abstract |
A Semi-Lagrangian Reproducing Kernel Approach for Simulation of Penetration into Geo-materials S. W. Chi, A. Mahdavi and C. Foster Abstract |
A Reproducing Kernel Particle Finite Volume Method for Linear and Nonlinear Mechanics M. Hillman and S. Yang Abstract |
Peridynamic horizon - effects on wave dispersion and crack propagation velocity S. Butt and G. Meschke Abstract |
A Structural Mechanics Approach Based on Peridynamics for Fracture of Carbon Nanomaterials X. Liang, L. Wang and J. Wang Abstract |
| Geomechanics I | ThM11 Room: Orotava Chair: Ignasi De Pouplana |
Prediction of Unsupported Excavations Behaviour with Machine Learning Techniques S. Commend, S. Wattel, J. Hennebert, P. Kuonen and L. Vulliet Abstract |
Viscoplastic Constitutive Equatoins for Copper to Model Canister Deformations and Implementation in CODE_BRIGHT P. Khadivipanah, S. Olivella and J. Vaunat Abstract |
Thermo-Hydro-Mechanical Simulation of a Full-Scale Steel-Lined Micro-Tunnel Excavated in the Callovo-Oxfordian Argillite S. Tourchi, J. Vaunat, A. Gens, M. N. Vu and F. Bumbieler Abstract |
A Coupled Plasticity - Erosion Model for Geomaterials I. C. Scheperboer, A. S. J. Suiker, E. Bosco, R. A. Luimes and F. H. L. R. Clemens Abstract |
Development of a Matlab Finite Elements Code for Plasticity: Implementation of the Mohr-Coulomb Law G. Amouzou and A. Soulaimani Abstract |
| Computational Design of Functional Materials and Structures | ThM12 Room: Arona Chair: Xavier Oliver |
Tunable Metasurface Design for Acoustic Wave Control Z. Chen, S. Shao, M. Negahban and Z. Li Abstract |
Topological Optimization of Structural Compliance Problems: Closed-Form Solutions D. Yago, J. Cante, O. Lloberas-Valls and J. Oliver Abstract |
Adaptive finite elements for structure design S. Perotto Abstract |
Implicit-Explicit (IMPLEX) Scheme for Modelling Meso-Structural Non-Linear Beams Micro Buckling in the Design of Mechanical Metamaterials A. Nuñez-Labielle, J. A. Hernández, J. Cante and J. Oliver Abstract |
Computational Procedure for Optimal Design of Acoustic Metamaterials D. Roca, D. Yago, J. Cante, O. Lloberas-Valls and J. Oliver Abstract |
Temporal nature of plasticity in the design of materials N. Selyutina and Y. Petrov Abstract |
|
|
| Damage, Fracture and Fatigue V | ThA01 Room: Verdi Chair: Francisco Pires |
Phase Field Framework for Anisotropic Structural Damage A. L. E. R Petrini, M. L. Bittencourt and J. L. Boldrini Abstract |
Energy Dissipation Analysis in Localized Strain Softenin Plasticity and Damage Models M. Nikolic, J. Carija, A. Ibrahimbegovic and Z. Nikolic Abstract |
Improved Numerical Fracture Strain Prediction of Ductile Plates for Failure in Nominal Plane Strain Tension R. G. Andersen, P. B. Woelke, J. G. Londono, K. L. Nielsen and J. W. Hutchinson Abstract |
A Phase-Field Formulation for Pressurized and Non-Isothermal Propagating Fractures in Deformable Porous Media N. Noii and T. Wick Abstract |
| IS-Computational Modeling of Material Forming Processes II Invited Session organized by Jean-Philippe Ponthot, Carlos Agelet de Saracibar, Lionel Fourment and Robertt Valente | ThA02 Room: Vivaldi 1 Chair: Robertt Valente |
Topology Optimization for Additive Manufacturing with Distortion Constraints H. J. M. Geijselaers, G. S. Misiun and A. H. van den Boogaard Abstract |
Role of Crystallographic Texture and Patterns of Stored Dislocations on Deep Drawability P. Van Houtte Abstract |
Hot Forging of Cylindrical Tubes. On the Factors Influencing Lateral Resisting Forces C. García Garino, C. Careglio, L. Papeleux, A. Mirasso and J. P. Ponthot Abstract |
Higher Order Kinematic Stiffening Effects in 3d-shell Models in Sheet Metal Forming Simulations T. Willmann and M. Bischoff Abstract |
Hybrid Computer System for Through Process Modelling and Prediction of Microstructure of hot Rolled High Strength Steel Strips L. Rauch, K. Bzowski, D. Szeliga and M. Pietrzyk Abstract |
| IS-Computational Plasticity of Heterogeneous Solids II Invited Session organized by Ankit Srivastava and Alan Needleman | ThA03 Room: Vivaldi 2 Chair: Amine Benzerga |
Computational approach to ductile fracture for anisotropic materials A. Benallal, A. Ferreira, D. Morin, L. E. Daehli and O. S. Hopperstad Abstract |
Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation R. Santos-Güemes, B. Bellón, G. Esteban-Manzanarez, J. Segurado and J. LLorca Abstract |
Modelling the Dislocation Microstructure Evolution in a Poly-Crystalline Micro Wire Under Torsion using a Runge-Kutta Discontinuous Galerkin Method K. Zoller, P. Gumbsch and K. Schulz Abstract |
A 2D Perturbation Model to Assess the Onset of Adiabatic Shear Bands in Metallic Sheets Subjected to Shear-Compression Loading G. Vadillo, A. Vaz-Romero and J. A. Rodriguez-Martínez Abstract |
Precipitate Strengthening in Mg Alloys: Atomistic Simulations and Experimental Observations G. Esteban-Manzanares, I. Papadimitriou, R. Alizadeh, A. Ma and J. Llorca Abstract |
| Composites II | ThA04 Room: Rossini 1 Chair: Fermin Otero |
Durability Evaluation of Madake bamboo by FE Analysis of Fracture with Consideration of Fibre Direction R. Ramful, A. Sakuma and H. Kimura Abstract |
The Elastoplasticity Behavior Of Wire In Inhomogeneous Woven Metal Mesh J. Zhang, H. Miyaki and A. Sakuma Abstract |
A Multiscale Simulation of Fiber Microbuckling in Long-Fiber Composite Laminates S. Hosseini, S. Löhnert, P. Wriggers and E. Baranger Abstract |
| IS-Numerical Modelling of Non-standard Cementitious Materials II Invited Session organized by Iulia Mihai and Anthony Jefferson | ThA05 Room: Coral Chair: Iulia Mihai |
Numerical Modelling of “Self-Protection” Processes in Concrete and its application within a multiscale framework Z. Mir, D. Höche, M. Zheludkevich, C. Gomes, R. Sampaio, A. Bastos, M. Ferreira, P. Maincon and J. Psihogios Abstract |
Numerical simulation of autogenous reactions in self-healing concrete E. Javierre, F. J. Gaspar and C. Rodrigo Abstract |
A Strong discontinuity approach for simulating damage-healing behaviour in self-healing cementitious materials A. Jefferson and B. Freeman Abstract |
| IS-Prediction and Utilization Process-induced Residual Stresses II Invited Session organized by Markus Kästner | ThA06 Room: Diamant Chair: Markus Kästner Co-Chair: Lisa Scheunemann |
FEM Simulation of Process Fluctuations during Rotary Swaging of Tubes S. Ishkina, Y. Liu, M. Herrmann, C. Schenck and B. Kuhfuss Abstract |
Phase-Field Modelling of Fatigue Crack Initiation and Propagation Under Residual Stresses M. Seiler, D. Kühne, P. Hantschke and M. Kästner Abstract |
Calculation of Sub-Surface-Initiated Fatigue Fractures in Gears D. Müller, T. Tobie and K. Stahl Abstract |
Modelling Strategies for Residual Stress Analysis of a Hybrid Rolling Process C. Guilleaume, A. Brosius and N. Küsters Abstract |
Single Point Incremental Forming: Relation between Forming Mechanisms and Residual Stresses for Different Path Strategies and Geometries F. Maaß, M. Hahn, A. E. Tekkaya, M. Dobecki and W. Reimers Abstract |
| IS-Length Scales in Plasticity and Fracture V Invited Session organized by Emilio Martínez-Pañeda, Benjamin Klusemann and Christian F. Niordson | ThA07 Room: Rossini 2 Chair: Emilio Martínez-Pañeda |
Keynote Lecture: Microscale Mechanisms of Plasticity and Damage in Advanced Multi-Phase Steels V. G. Kouznetsova, F. Maresca, L. Liu, J. P. M. Hoefnagels and M. G. D. Geers Abstract |
Void size and shape effects in a gradient enhanced continuum model I. Holte, C. Niordson and K. L. Nielsen Abstract |
The Effects from Size and Volume Fraction of Intermetallic Particles on Ductile Failure: a Numerical Study V. Espeseth, D. Morin, T. Børvik and O. S. Hopperstad Abstract |
A reduced micromorphic single crystal plasticity model at finite deformations J. M. Scherer, J. Besson, S. Forest, J. Hure and B. Tanguy Abstract |
| Multi-Scale Materials Models II | ThA08 Room: Cristal Chair: Eduardo de Souza Neto |
Sensitivity Analysis Based Multi-Scale Optimisation N. Zupan and J. Korelc Abstract |
Strain localization and dynamic recrystallization in polycrystalline metals: thermodynamic theory and simulation framework C. Lieou, H. Mourad and C. Bronkhorst Abstract |
Modeling dislocation patterning: morphology and size effects B. D. Nguyen and S. Sandfeld Abstract |
Multiscale dynamics modelling based on the Method of Multiscale Virtual Power Y. Chen and E.A. de Souza Neto |
Equation-free multiscale modeling of metallic lattices with geometrical and material nonlinearity and variability L. Chen, L. Beex, P. Berke, T. Massart and S. Bordas Abstract |
An optimization of the local Hall-Petch relationship using slip trace analysis technique and scale transition rules: Application in an equiaxed Ti-6Al-4V titanium alloy M. Cheikh, F. Benmessaoud, V. Velay, V. Vidal, C. Boher and F. Rezai-Aria Abstract |
| Advanced Materials Models II | ThA09 Room: Tenerife Chair: Zhuo Zhuang |
Material parameter identification for sheet metal using full-field measurements B. Söhngen and K. Willner Abstract |
Anisotropic Strain-Gradient Plasticity of Porous Metals I. Papadioti and N. Aravas Abstract |
Interplay Between Grain Boundary Migration, Grain Rotation and Intra-granular Plasticity in Nanocrystalline Materials J. Mikula, S. P. Joshi, T. E. Tay, R. Ahluwalia and S. S. Quek Abstract |
Numerical implementation of a model featuring sequential directional distortional hardening. J. Plesek, R. Marek and S. Parma Abstract |
Advanced modelling of rate-dependent anisotropic Ti-6Al-4V titanium alloy for aeronautical applications M. Ruiz de Sotto, P. Longère, V. Doquet and J. Papasidero Abstract |
Geometrically Nonlinear Plastic Flow Theory Based on Asymmetric Measures of Stress and Strain States A. Yants and P. Trusov Abstract |
| Biomechanics I | ThA10 Room: Lanzarote Chair: Thomas Hughes |
Effect of Axial Prestretch on Internal Volume of Nonlinear Anisotropic Tube during its Inflation and Consequences for Arterial Mechanics L. Horný and Z. Petřivý Abstract |
Hierarchical Elastoplasticity of Bone V. Wittner , C. Morin and C. Hellmich Abstract |
A Trans-scale Computational Model Considering Strain Gradient Theory for Nacre J. Song and Y. Wei Abstract |
Multiscale Modelling of Liver Perfusion E. Rohan, J. Turjanicová and V. Lukeš Abstract |
Computational modeling of the behavior of biomarker particles of colorectal cancer in fecal matter G. Suárez Guerrero, E. Vallejo Morales and L. Hoyos Palacio Abstract |
| Geomechanics II | ThA11 Room: Orotava Chair: Djordje Peric |
On Anisotropic Hyper-Elastoplasticity of Geomaterials at Large Strains K. C. Bennett, R. A. Regueiro and D. J. Luscher Abstract |
A Return Mapping Algorithm for Non-Smooth Multisurface Plasticity based on Newton-Raphson Method with Line Search R. Abreu, C. Mejia and D. Roehl Abstract |
Temporal Characterization of Rock Dynamic Destruction A. N. Martemyanov and Y. Petrov Abstract |
Implementation of a two-surface constitutive model for unsaturated soils T. Charlton, A. Osman, W. Coombs and C. Augarde Abstract |
Simulation of the unsupported tunnel excavation using a 3D steady-state numerical method A. Defay, S. Maiolino, H. Maitournam and D. Subrin Abstract |
Numerical modeling of oil field subsidence using dual porosity/dual permeability and elastoplastic constitutive model N. Noreña, E. C. Mejia, J. A. Rueda and D. Roehl Abstract |
| Advanced Numerical Methods II | ThA12 Room: Arona Chair: Ernst Rank |
Elastic properties of isotropic discrete systems with skew contact normals J. Eliáš Abstract |
Combining SPH and Dislocation Plasticity Model for Dynamic Problems A. E. Mayer Abstract |
Advances in the Coupled FEM-DEM Technique for Predicting the Onset and Evolution of Multifractures in Geomaterials and Concrete A. Cornejo, F. Zárate and E. Oñate Abstract |
Solid-shell finite element for nonlinear applications M. Dia, A. Gravouil, N. Hamila and M. Abbas Abstract |
Elastoplasticity with linear tetrahedral elements: A variational multiscale method N. Abboud and G. Scovazzi Abstract |
On the Accuracy of the Numerical Integrals of Newmark Method for Computing Inelastic Seismic Responses N. Yoshizaki, K. Ijima, H. Obiya and Z. M. Nizam Abstract |
|
|
| Damage, Fracture and Fatigue VI | ThE01 Room: Verdi Chair: Sergio Jimenez |
Ductile fracture simulation of Japanese through-wall cracked pipe test under load-controlled cyclic loading in very low cycle fatigue J. H. Hwang, G. G. Yoon, N. Miura and Y. J. Kim Abstract |
Prediction of life under creep-fatigue condition for P91 steel using energy-based damage model H. W. Jung, Y. R. Oh, J. S. Shin and Y. J. Kim Abstract |
Multi-scale modelling of failure in cast iron due to thermo-mechanical fatigue A. Mohammadpourshoorbakhlou, K. G. Kouznetsova and M. G. D. Geers Abstract |
Micromechanical Modeling and Simulation of the Loading Path Dependence of Ductile Failure V. Vishwakarma and S. M. Keralavarma Abstract |
The Effect of Orientation on Void Growth in Aluminium Bicrystals M. Dakshinamurthy, G. Vadillio Martin and K. Kowalczyk-Gajewska Abstract |
Multiscale model of small scale plasticity via discrete defect element method T. Park, F. Pourboghrat and I. Ryu Abstract |
The Integration Schemes of Preston-Tonks-Wallace Visco-Plasticity Model J. Plohr Abstract |
| IS-Computational Modeling of Material Forming Processes III Invited Session organized by Jean-Philippe Ponthot, Carlos Agelet de Saracibar, Lionel Fourment and Robertt Valente | ThE02 Room: Vivaldi 1 Chair: Jean-Philippe Ponthot |
Damage Evolution in Aluminium Alloy 2011 Wires Drawn Under Different Geometrical Configurations
Keynote Lecture D. J. Celentano, A. A. Gonález and M. A. Cruchaga Abstract |
Defect prediction in Friction Stir Welding N. Dialami, M. Cervera and M. Chiumenti Abstract |
Mixed Three-field FE Formulation for Highly Non-linear Analysis Encompassing the Incompressibility Limit M. Chiumenti and M. Cervera Abstract |
On the Modelling of Instability and Flatness Defects of Sheets: Application to Rolling Process H. Zahrouni, K. Kpogan, S. Abdelkhalek, A. Limam, H. Ben Dhia and M. Potier-Ferry Abstract |
| IS-Computational Plasticity of Heterogeneous Solids III Invited Session organized by Ankit Srivastava and Alan Needleman | ThE03 Room: Vivaldi 2 Chair: Alan Needleman |
A unified phase field damage model for modeling the brittle-ductile dynamic failure mode transition in metals D. Y. Chu, X. Li, Z. L. Liu and Z. Zhuang Abstract |
Dynamic Spherical Cavity Expansion in Gurson Materials with Uniform and Non-Uniform Distributions of Porosity T. dos Santos, K. E. N‘souglo and J. A. Rodríguez-Martínez Abstract |
Dynamics of Necking and Ductile Fracture in Porous Metals X. Zheng, K. E. N’souglo, S. Osovski, J. A. Rodríguez-Martínez and A. Srivastava Abstract |
| Multi-Fracturing Solids, Multi-Physics Problems | ThE04 Room: Rossini 1 Chair: Miguel Angel Celigueta |
Multi-temporal scale approach for complex thermo-mechanical loading M. Bhattacharyya, C. Chu, D. Dureisseix and B. Faverjon Abstract |
Investigation of Fluid Lag and Stepwise Fracture Propagation During Hydraulic Fracturing Processes B. Chen, Y. Sun and C. Li Abstract |
A Chemo-Mechanical Model for Hydrogel Gelation: Coupling of Fluid Swelling, Crosslinking Shrinkage and Reactive-Diffusive Mechanisms A. Hajikhani, M. Marino and P. Wriggers Abstract |
Heat transport with advection in fractured rock A. Pérez, I. Carol and P. Prat Abstract |
Finite Volume Analysis of Reinforced Concrete Structure Cracking Using a Thermoplastic-Damage Model B. Selma, M. Chekired, J. Côté, C. Bessette and L. Jinga Abstract |
| IS-Isogeometric Methods Invited Session organized by Alessandro Reali and Thomas Hughes | ThE05 Room: Rossini 2 Chair: Thomas Hughes |
A phase-field model for cohesive fracture: Formulation and analysis within the isogeometric analysis framework Y. Ghaffari Motlagh and R. de Borst Abstract |
Advanced modeling and applications of Isogeometric Analysis with a focus on shells and laminates A. Reali Abstract |
Automated Symbolic, HPC and Spectral study for Isogeometric Analysis using Python A. Ratnani Abstract |
| Environment and Geosciences | ThE06 Room: Diamant Chair: Ignacio Carol |
Viscoplastic Constitutive Models for Zero-thickness Interface Elements, Formulation and Applications I. Jaqués and I. Carol Abstract |
Zero-thickness Interface Model with Chemical Degradation by Acid Attack A. Martínez, J. Liaudat, C. M. López and I. Carol Abstract |
Modelling Acid Attack of Oilwell Cement Exposed to Carbonated Brine: Effect of Specimen Geometry on Experimental Results L. Barandiarán, J. Liaudat, C. López and I. Carol Abstract |
Modelling a Heating-hydration Bentonite-based Column Test using a Double Porosity Approach R. B. Vasconcelos, A. Gens, J. Vaunat, D. F. Ruiz and M. V. Villar Abstract |
Computational Analysis of the Behavior of Atmospheric Pollution due to Demographic, Structural Factors, Vehicular Flow, and Commerce Activities G. Suárez Guerrero, J. A. Niño Navia, R. Chakir, J. D. Hoyos Giraldo and B. Streichenberger Abstract |
| Data Driven Constitutive Models | ThE07 Room: Coral Chair: Michael Ortiz |
A Cooperative Game for Automated Generations of Elasto-Plasticity Theories and Models with AI-Guided Experimentation W. Sun, K. Wang and Q. Du Abstract |
A Model-free Data-driven Approach for Plasticity R. Eggersmann, T. Kirchdoerfer, S. Reese, L. Stainier and M. Ortiz Abstract |
Training and Testing a Machine Learning Based Elasto-plasticity Model D. Huang, C. Weißenfels and P. Wriggers Abstract |
Machine Learning based Multiscale Modeling of Deformation of Multiphase Microstructures A. Alankar, A. Beniwal and R. Dadhich Abstract |
A Study of Machine Learning Approaches to Predict Flow Curves at Different Temperatures and Strain-rates P. Wechsuwanmanee, W. Zhang, J. Lian and S. Münstermann Abstract |
Learning Dislocation Dynamics: a Machine Learning Approach based on 2D Discrete Dislocation Dynamics H. Song and S. Sandfeld Abstract |
| Multi-Scale Materials Models III | ThE08 Room: Cristal Chair: Ignasi De Pouplana |
Microstructure-sensitive modeling of the macroscopic behavior of AD730 TM nickel-based polycrystalline superalloy using crystal plasticity finite element simulations M. Panella, L. Signor, J. Cormier, P. Villechaise and M. Bernacki Abstract |
Numerical Study of Surface Behaviour of Nickel Single Crystal with Strain Gradient Crystal Plasticity Model. S. Yuan, L. Duchêne, C. Keller, E. Hug and A. M. Habraken Abstract |
Motion of Dislocation in Aluminum with Various Copper Strengthening Phases: MD Simulations and Continuum Modeling V. Krasnikov, A. Mayer, V. Pogorelko, E. Fomin and D. Voronin Abstract |
Incipience of Plasticity in Pure Aluminum and Aluminum with Pores and Inclusions V. Pogorelko, A. Mayer and V. Krasnikov Abstract |
| Advanced Materials Models III | ThE09 Room: Tenerife Chair: Oriol Lloberas-Valls |
Small strain crystal plasticity based on the infeasible primal-dual interior point method L. Scheunemann, P. S. B Nigro, J. Schröder and P. M. Pimenta Abstract |
Modeling of Gradient-Extended Crystal Inelasticity with Grain Boundary Interaction including Decohesion L. Spannraft, M. Ekh, F. Larsson, K. Runesson and P. Steinmann Abstract |
Strain Gradient Plasticity Modelling of Twinning in TWIP Steels R. B. Ravish, P. Z. Berke and T. J. Massart Abstract |
Analysis of a Steam Turbine Rotor with a Composite Model for Rate-Dependent Inelasticity J. Eisenträger, K. Naumenko and H. Altenbach Abstract |
Direct Differentiation of the J2 Plasticity Model under Assumed Stress States M. H. Scott Abstract |
Extended Concept of Representative Directions to Describe Inelastic Behaviour of Electrospun Polymers A. V. Shutov Abstract |
| Biomechanics II | ThE10 Room: Lanzarote Chair: Eduardo Soudah |
Time-dependent material growth applied to a finite viscoelastic continuum model for hard and soft tissue M. Rolf-Pissarczyk and P. Papadopoulos Abstract |
Numerical Evaluation of Wearing Pressure and Cloth Stiffness on Vibration of Human Skeletal Muscle during Athletic Movement S. Ueda and A. Sakuma Abstract |
Investigating the nanomechanical properties of living smooth muscle cells by atomic force microscopy and numerical simulations J. P. S. Ferreira, M. Kuang, M. P. L Parente, M. Damaser and R. Natal Jorge Abstract |
| Contact Problems | ThE11 Room: Orotava Chair: Alejandro Cornejo |
The Velocity Dependent Friction Behavior of Single-Asperity Contacts J. Hu, H. Song, X. Liu and Y. Wei Abstract |
Time-adaptive finite element computations for large deformation contact problems M. Grafenhorst and S. Hartmann Abstract |
Adaptive Remeshing Techniques on Contact Simulations Considering the Contact Stress Hessian Metric Tensor V. Mataix Ferrándiz, R. Rossi, F. Rastellini and E. Oñate Abstract |
Softness Evaluation of Ultra-thin Elastic Body by Ball Indentation Technique C. Lu and S. Atsushi Abstract |
FE-Modeling of Elasto-Hydrodynamic Contact with Free Surface Flow in Partially Flooded Regions K. Poulios Abstract |
Atomistic Calculation of Elementary Process of Adhesion during Forming T. Makino, J. Natsume, N. Suzuki and S. Kada Abstract |
|
