Monday, June 30th 11:30 - 12:30
Multi-phase and Multi-scale Modelling of Concrete and Concrete Structures I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pavao Marovic, Nenad Bicanic and Adnan Ibrahimbegovic
|
MS118
Room: CAS3.6
|
Rate Dependent Effects in the Simulation of Progressive Collapse of RC Structures
Berta Santafé, Thierry Massart, Philippe Bouillard, John Vantomme
|
Monday, June 30th 11:30 - 12:30
Multiscale Modeling and Uncertainty Quantification of Heterogeneous Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Manolis Papadrakakis, George Stefanou, X. Frank Xu and Nicholas Zabaras
|
MS150
Room: CAS3.10
|
Failure Initiation and Uncertanty Inside Multi-Scale Random Media
Robert Lipton
|
Monday, June 30th 11:30 - 12:30
Continuum Models for Composite and Nano-Materials, Mems/Nems Devices I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Toshiro Matsumoto and Vladimir Kompis
|
MS078
Room: CIN0.2
|
Thermoelastic Damping Analysis of Quartz SAW Resonator
Toshiro Matsumoto, Toru Takahashi, Hironori Ito, Yuri Sakaki
Press Molding Simulation of Thermo-Plastic Resin Reinforced by Carbon Nanofiber
Masahiro Arai, Hiroki Tanaka, Kazutoshi Matsushita, Koh-ichi Sugimoto
|
Monday, June 30th 11:30 - 12:30
Computational Methods for Generalized Continua I
Minisymposium organized by Richard Regueiro, Krishna Garikipati, Carlo Sansour, Paul Steinmann, Harm Askes and Jerzy Pamin
|
MS028
Room: EXC1.2
|
Nonlocal Thermoelastic Dissipation in Micron - and Submicron - Resonators
Raffaele Ardito, Claudia Comi, Alberto Corigliano, Attilio Frangi
|
Monday, June 30th 11:30 - 12:30
Mathematical Analysis of Generalized Finite Element Method I
Minisymposium organized by Uday Banerjee and Mark Alexander Schweitzer
|
MS088
Room: EXC1.1
|
GFEM for Dirichlet Data with Low Regularity
Ivo Babuska, Victor Nistor, Nicolae Tarfulea
|
Monday, June 30th 11:30 - 12:30
Computational Structural Mechanics I
|
TS328
Room: CAS3.2
|
A Quadratic Triangular Finite Element for the Nonlinear Analysis of Thin Shells
Edgard Almeida Neto, Paulo Pimenta, Eduardo Campello
Bifurcation Analysis of an Elastic Ring supported by Springs
Takashi Manabe, Nobuyoshi Tosaka
|
Monday, June 30th 11:30 - 12:30
Computational Modelling in Bone Mechanobiology I
Minisymposium organized by Jose Manuel Garcia-Aznar, Danny Kelly, Manuel Doblare and Patrick Prendergast
|
MS180
Room: CIN2.1
|
Influence of Microstructure Dimensions on Prediction of Local Tissue Strain in Bone
Despina Deligianni, Charis Apostolopoulos
|
Monday, June 30th 11:30 - 12:30
Simulation Technology towards the Hydrogen Use World. I
Minisymposium organized by Hiroshi Kanayama and Noriyuki Miyazaki
|
MS056
Room: CAS1.4
|
Stationary Analysis by a Thermal Convection Solver with Hierarchical Domain Decomposition Method
Hiroshi Kanayama, Kouichi Komori, Daigo Sato
|
Monday, June 30th 11:30 - 12:30
Computational Electro-Magneto-Hydro-Dynamics (EMHD) I
Minisymposium organized by Gunter Gerbeth, George S. Dulikravich and Koulis Pericleous
|
MS042
Room: CAS3.5
|
Investigating Multi-phase Effects in Electrochemical Machining
Ryo Tsuboi, Makoto Yamamoto
|
Monday, June 30th 14:00 - 16:00
Minisymposium on Inverse Problems in Heat Transfer II
Minisymposium organized by Alain Kassab, Richard Bialecki and Eduardo Divo
|
MS074
Room: CAS2.1
|
Numerical Estimation for Intumescent Thermal Protection using One-Dimensional IHCP
Luis Mesquita, Paulo Piloto, Mario Vaz, Tiago Pinto
|
Monday, June 30th 14:00 - 16:00
Advanced Numerical Approaches for Complex Multi-phase Flows II
Minisymposium organized by Takashi Yabe, Nobuatsu Tanaka and Feng Xiao
|
MS140
Room: CAS2.6
|
Numerical Investigation of the Agglomerating Behavior of Particles governed by van der Waals forces
Takayuki Yukimoto, Takeo Kajishima, Shintaro Takeuchi
|
Monday, June 30th 14:00 - 16:00
Computational Methods in Multibody Dynamics Simulation II
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Ball-Beam System Modeling using Nonlinear State-Space Equations Approach aided by Bond-Graphs
Celso Negrao, Euler Barbosa, Nazem Nascimento
|
Monday, June 30th 14:00 - 16:00
Subgrid Scales, a-Posteriori Error Estimation and Adaptivity for Computational Mechanics II
Minisymposium organized by Guillermo Hauke and James R. Stewart
|
MS081
Room: CAS3.8
|
Hybrid Mesh Generation for Reservoir Flow Simulation: Extension to CPG Grids
Thibaud Mouton, Houman Borouchaki, Chakib Bennis
A Free Parameter Space-Time Nonlinear Subgrid Method for Transport Problems
Regina Almeida, Isaac Santos
|
Monday, June 30th 14:00 - 16:00
Inverse Problems II
Minisymposium organized by Bojan Guzina and Marc Bonnet
|
MS102
Room: CAS1.8
|
A Bayesian Inference Approach for Structural Dynamic Transfer Function Identification
Erliang Zhang, Pierre Feissel, Jérôme Antoni, Claude Blanzé
Nondestructive Measurement of LSI Electroplating Current Distribution using Magnetic Sensors
Yoshinao Kishimoto, Kenji Amaya
|
Monday, June 30th 14:00 - 16:00
Mathematical Analysis of Generalized Finite Element Method II
Minisymposium organized by Uday Banerjee and Mark Alexander Schweitzer
|
MS088
Room: EXC1.1
|
Local Approximation Error for Generalized FEM for Problems with Discontinuous Coefficients
Ivo Babuska, Robert Lipton, Michael Stuebner
|
Monday, June 30th 14:00 - 16:00
Uncertainty Modeling and Quantification in Computational Mechanics II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Grid-Aided Stochastic Finite Element using Ninf-G
Yohei Sato, Hiroshi Okuda
|
Monday, June 30th 14:00 - 16:00
Stabilized, Multiscale and Multiphysics Methods I
Minisymposium organized by Tayfun Tezduyar, Arif Masud and Thomas Hughes
|
MS055
Room: EXC2.2
|
High Intensity Focused Ultrasound in a Human Body
Kohei Okita, Kenji Ono, Shu Takagi, Yoichiro Matsumoto
|
Monday, June 30th 14:00 - 16:00
Computational Electro-Magneto-Hydro-Dynamics (EMHD) II
Minisymposium organized by Gunter Gerbeth, George S. Dulikravich and Koulis Pericleous
|
MS042
Room: CAS3.5
|
Progress Simulating Low Temperature Collisional Plasmas with a PIC-DSMC Method
Matthew Hopkins, Paul Crozier, Russell Hooper, Polly Hopkins, Steven Plimpton, Alan Williams
|
Monday, June 30th 14:00 - 16:00
Computational Structural Mechanics II
|
TS328
Room: CAS3.2
|
Duality in the Geometrically Exact Analysis of Reissner-Simo Beams
Hugo Santos, Jose Almeida, Paulo Pimenta
|
Monday, June 30th 14:00 - 16:00
Simulation Technology towards the Hydrogen Use World. II
Minisymposium organized by Hiroshi Kanayama and Noriyuki Miyazaki
|
MS056
Room: CAS1.4
|
Atomistic Study of Interaction between Hydrogen Atoms and Dislocations around Mode I Crack Tip
Ryosuke Matsumoto, Shinya Taketomi, Sohei Matsumoto, Yoshinori Inoue, Noriyuki Miyazaki
Molecular Dynamics Study on Dislocation Activities in Iron Specimens including Hydrogen
Kenji Nishimura, Ryosuke Matsumoto, Shinya Taketomi, Noriyuki Miyazaki
Effect of Hydrogen on (110)[111] Edge Dislocation Mobility in Alpha Iron
Shinya Taketomi, Ryosuke Matsumoto, Noriyuki Miyazaki
|
Monday, June 30th 14:00 - 16:00
Continuum Models for Composite and Nano-Materials, Mems/Nems Devices II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Toshiro Matsumoto and Vladimir Kompis
|
MS078
Room: CIN0.2
|
A Micromechanics Model of Particle-Reinforced Composites taking account of Debonding Damage and Particle Size Effect
Keiichiro Tohgo, Yu Itoh, Yoshinobu Shimamura
|
Monday, June 30th 14:00 - 16:00
Multi-phase and Multi-scale Modelling of Concrete and Concrete Structures II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pavao Marovic, Nenad Bicanic and Adnan Ibrahimbegovic
|
MS118
Room: CAS3.6
|
Operator Split Fe Solution Method for RC Structures
Adnan Ibrahimbegovic, Amor Boulkertous, Luc Davenne
|
Monday, June 30th 14:00 - 16:00
Numerical Techniques for the Modelling of Material Failure in Solids II
Minisymposium organized by Xavier Oliver and Francisco Armero
|
MS237
Room: CAS3.7
|
Numerical Modelling of the Load Carrying Capacity Degradation in Concrete Beams due to Reinforcement Corrosion
Pablo Sánchez, Alfredo Huespe, Javier Oliver, Sebastián Toro
|
Monday, June 30th 14:00 - 16:00
Computational Fusion Technology II
Minisymposium organized by Ettore Salpietro and Daniela P. Boso
|
MS121
Room: CAS1.5
|
Finite Difference Numerical Siimulation of Nb3Sn Performances when subjected to Bending Straing
Chiarasole Fiamozzi Zignani, V. Corato, A. della Corte, G. Messina, L. Muzzi
|
Monday, June 30th 14:00 - 16:00
Advances in Multiphysics Simulation and Experimental Testing of MEMS and NEMS II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Attilio Frangi, Narayan Aluru and Subrata Mukherjee
|
MS151
Room: CIN1.1
|
Multi-Physics Modelling for the Fabrication, Packaging and Reliability of Micro-Systems Components
Chris Bailey, Stoyan Stoyanov, Ying-Kit Tang, Xiandong Xue, Tim Tilford
|
Monday, June 30th 14:00 - 16:00
Biological Cells and Capsules II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Takuji Ishikawa , Dominique Barthes-Biesel , Petia Vlahovska and Takami Yamaguchi
|
MS194
Room: CIN0.1
|
Motion of a Capsule in a Simple Shear Flow: Effect of Membrane Description and Bending Stiffness
Johann Walter, Anne-Virginie Salsac, Hakim Naceur, Jean-Louis Batoz, Dominique Barthès-Biesel
|
Monday, June 30th 16:30 - 18:30
Advances in Computational Mechanics in Honor of Professor Maier I
Minisymposium organized by Eugenio Onate, Claudia Comi and Giorgio Novati
|
MS155
Room: EXC1.1
|
Performance Evaluation of Masonry Infill Walls Subjected to Axial and In-Plane Shear: Meso-and Macro Experiments and Simulations
Kaspar Willam, Ben Blackard, Carlo Citto
Effective Stress Principle in Modelling Shrinkage and Creep of Concrete at Early Ages and Beyond
Francesco Pesavento, Bernhard A. Schrefler, Dariusz Gawin, Mateusz Wyrzykowski
|
Monday, June 30th 16:30 - 18:30
Computational Contact Mechanics III
Minisymposium organized by Peter Wriggers, Tod A. Laursen and Giorgio Zavarise
|
MS168
Room: CAS1.2
|
Numerical Simulation of Bullet Heating while travelling in Grooved Barrel
Moshe Arad, David Touati, Sharon Peles
|
Monday, June 30th 16:30 - 18:30
Advanced Numerical Approaches for Complex Multi-phase Flows III
Minisymposium organized by Takashi Yabe, Nobuatsu Tanaka and Feng Xiao
|
MS140
Room: CAS2.6
|
A New Micro-Macro Algorithm for Simulation of Polymer Flows
Juan Luis Prieto, Rodolfo Bermejo, Manuel Laso
|
Monday, June 30th 16:30 - 18:30
Multiscale Modeling and Uncertainty Quantification of Heterogeneous Materials III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Manolis Papadrakakis, George Stefanou, X. Frank Xu and Nicholas Zabaras
|
MS150
Room: CAS3.10
|
Probabilistic Analysis of Non-local Random Media
Giulio Cottone, Mario Di Paola, Massimiliano Zingales
|
Monday, June 30th 16:30 - 18:30
Virtual Fracture Testing of Composite Materials and Structures I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Javier LLorca and Brian Cox
|
MS154
Room: CAS3.1
|
Multi-Disciplinary Analysis and Optimisation of Large Composite Structures in the Early Design Phase: Issues and Challenges
Xavier Mencaglia, Christophe Friebel, Hiromasa Kato, Yves-Henri Grunevald, Norbert Lidon, Frédéric Lani
|
Monday, June 30th 16:30 - 18:30
Computational Modelling in Bone Mechanobiology III
Minisymposium organized by Jose Manuel Garcia-Aznar, Danny Kelly, Manuel Doblare and Patrick Prendergast
|
MS180
Room: CIN2.1
|
Different Animal Models of Bone Distraction
Esther Reina-Romo, Maria José Gómez-Benito, José Manuel García-Aznar, Jaime Domínguez, Manuel Doblaré
|
Monday, June 30th 16:30 - 18:30
Modeling Robustness and Structural Reliability Analysis I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by James Beck, Gerhart Schuëller and Hector Jensen
|
MS063
Room: CAS2.4
|
Quality Assurance of Uncertain Mechanical Systems Considering the Effects of Fatigue and Fracture
Marcos A. Valdebenito, Gerhart I. Schuëller
|
Monday, June 30th 16:30 - 18:30
Recent Developments in Computational Methods for Structural Optimization III
Minisymposium organized by H Alicia Kim, Gengdong Cheng, David Kennedy, Michal Kocvara, Tae Hee Lee, Kurt Maute and Mathias Stolpe
|
MS069
Room: CAS0.1
|
On Solving Discrete Topology Optimization Problems with Stress Constraints to Global Optimality
Mathias Stolpe, Nam Nguyen Canh, Roman Stainko
Multiphase Topology Optimization for Fiber Reinforced Composites with Damage
Junji Kato, Ekkehard Ramm
|
Monday, June 30th 16:30 - 18:30
Computational Geomechanics Minisymposium III
Minisymposium organized by Boris Jeremic, Claudio Tamagnini, Richard Regueiro, Ronaldo Borja, Fusao Oka and Stein Sture
|
MS029
Room: PGL
|
Computational Approach for Compaction Bands in Porous Sandstones
Jun Kato, A.J.L. Crook
|
Monday, June 30th 16:30 - 18:30
Accuracy Assessment of the eXtended Finite Element Method: Adaptivity, Comparison with Competing Methods, Industrialisation III
Minisymposium organized by Stephane Bordas, Marc Duflot and Pierre-Olivier Bouchard
|
MS141
Room: EXC1.3
|
A Multigrid X-FEM Strategy for 3-D Fatigue Crack Growth Simulation
Johann Rannou, Anthony Gravouil, Marie-Christine Baïetto-Dubourg
|
Monday, June 30th 16:30 - 18:30
Stabilized, Multiscale and Multiphysics Methods II
Minisymposium organized by Tayfun Tezduyar, Arif Masud and Thomas Hughes
|
MS055
Room: EXC2.2
|
Biomechanical Factors Influencing Patient-Specific FSI Simulation of Cerebral Aneurysms
Ryo Torii, Marie Oshima, Toshio Kobayashi, Kiyoshi Takagi, Tayfun Tezduyar
|
Monday, June 30th 16:30 - 18:30
Computational Methods in Nonlinear Dynamics III
Minisymposium organized by Stefano Lenci and Marian Wiercigroch
|
MS038
Room: CAS2.5
|
Nonlinear Dynamic Response of a Simply-Supported Laminated Composite Plate subjected to Explosive Pressure Pulses
Zafer Kazanci, Zahit Mecitoglu
|
Monday, June 30th 16:30 - 18:30
Computational Structural Mechanics III
|
TS328
Room: CAS3.2
|
Dynamic Nonlinear Finite Element Analysis of Elasto-Plastic Collapse Behavior including the Local Buckling for the Square Steel Tube using the Mixture of BEAM Element and SHELL Element
Tatsuhiko Ine, Kohei Yuge, Tukasa Takayama, Yuta Hashimoto, Koichi Kajiwara
|
Monday, June 30th 16:30 - 18:30
Biological Cells and Capsules III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Takuji Ishikawa , Dominique Barthes-Biesel , Petia Vlahovska and Takami Yamaguchi
|
MS194
Room: CIN0.1
|
Adhesive Dynamics Simulations of Leukocyte Rolling and Firm Adhesion
Daniel Hammer, Kelly Caputo, Michael Beste, Ellen Krasik
|
Tuesday, July 1st 10:30 - 12:30
Numerical Modeling in Reinforced Concrete and Its Validation I
Minisymposium organized by Rena C. Yu, Giulio Ventura, Gonzalo Ruiz and Jacinto R. Carmona
|
MS200
Room: CAS3.6
|
Hysteresis, Damage and Moisture Effects in Quasi-brittle Porous Materials
Stijn Mertens, Jan Carmeliet, John Vantomme
|
Tuesday, July 1st 10:30 - 12:30
Advances in Multiscale and Multiphysics Methods: From Quantum to Continuum I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Dong Qian, Wing Kam Liu and Jacob Fish
|
MS265
Room: CAS3.3
|
Thermal and Mechanical Field Decomposition in Nonequilibrium Molecular Dynamics Simulations
Albert To, Wing Kam Liu
|
Tuesday, July 1st 10:30 - 12:30
Computational Methods in Nonlinear Dynamics IV
Minisymposium organized by Stefano Lenci and Marian Wiercigroch
|
MS038
Room: CAS2.5
|
Numerical Continuation Methods for Models with Nonsmooth Dynamics
David Barton
|
Tuesday, July 1st 10:30 - 12:30
Multiscale Model-Based Simulation with Applications to Nano and Bio Systems I
Minisymposium organized by Zhen Chen, Er Ping Chen, H. Eliot Fang, Hongwu Zhang and Zhuo Zhuang
|
MS169
Room: EXC1.2
|
Combined Atomistic and Continuum Modelling of Nonlinear Elasticity in Nanostructured Materials
Luciano Colombo, Stefano Giordano, Alessandro Mattoni, Pierluca Palla
|
Tuesday, July 1st 10:30 - 12:30
Advanced Numerical Approaches for Complex Multi-phase Flows IV
Minisymposium organized by Takashi Yabe, Nobuatsu Tanaka and Feng Xiao
|
MS140
Room: CAS2.6
|
Performance of the Water/Glycerine Separation by Hydrocyclone
Fabiana P.M. Farias, Severino R. de Farias Neto, Antonio G.B. de Lima, Cidronia J.O. Buriti
|
Tuesday, July 1st 10:30 - 12:30
Challenges in Mechanics for Nuclear Plants I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pierre Verpeaux and Stéphane Andrieux
|
MS123
Room: CAS1.5
|
1D vs 3D Modelling of the Tendons in a Representative Structural Volume of a Concrete Containment Building
Ludovic Jason, Shahrokh Ghavamian, Alexis Courtois
|
Tuesday, July 1st 10:30 - 12:30
Recent Developments in Computational Methods for Structural Optimization IV
Minisymposium organized by H Alicia Kim, Gengdong Cheng, David Kennedy, Michal Kocvara, Tae Hee Lee, Kurt Maute and Mathias Stolpe
|
MS069
Room: CAS0.1
|
Decomposition Techniques for Global Optimization of Discrete Topology Design Problems
Eduardo Muñoz, Mathias Stolpe, Martin P. Bendsøe
Multilevel Postbuckling Design of Aerospace Structures
Shuang Qu, David Kennedy, Carol A. Featherston
|
Tuesday, July 1st 10:30 - 12:30
Numerical Techniques for the Modelling of Material Failure in Solids IV
Minisymposium organized by Xavier Oliver and Francisco Armero
|
MS237
Room: CAS3.7
|
Numerical Modelling of Growth and Propagation of Interfaces by Means of the Embedded Discontinuities Approach
Loredana Contrafatto, Massimo Cuomo
|
Tuesday, July 1st 10:30 - 12:30
Numerical and Computational Aspects of Interface Problems II
Minisymposium organized by Frederic Gibou and Christian Ratsch
|
MS050
Room: CAS3.8
|
Coupled Composition-Deformation Phase-Field Method for Lipid Membranes with Asymmetric Leaflet Compositions
Chloe M. Funkhouser, Francisco J. Solis, Katsuyo Thornton
A Robust, Fully Adaptive Hybrid Method for Two-Phase Flows
Héctor D. Ceniceros , Alexandre M. Roma, Aristeu da Silveira-Neto, Millena M. Villar
|
Tuesday, July 1st 14:00 - 16:00
Parallel Computing II
|
TS326
Room: CAS2.2
|
Interactive Flow Simulation with FPGA-based Acceleration of 2D Lattice Boltzmann Method
Kentaro Sano, Satoru Yamamoto
|
Tuesday, July 1st 14:00 - 16:00
Advances in Multiscale and Multiphysics Methods: From Quantum to Continuum II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Dong Qian, Wing Kam Liu and Jacob Fish
|
MS265
Room: CAS3.3
|
Modeling Masonry Microstructure through Virtual Block Clusters
Luca Salvatori, Wing Kam Liu, Paolo Spinelli
Enhanced Molecular Dynamics for Simulating Thermal and Charge Transport Phenomena
Reese E. Jones, Jeremy A. Templeton, Gregory J. Wagner, David Olmsted, Normand Modine
|
Tuesday, July 1st 14:00 - 16:00
Numerical and Computational Aspects of Interface Problems III
Minisymposium organized by Frederic Gibou and Christian Ratsch
|
MS050
Room: CAS3.8
|
Numerically Repeated Support Splitting and Connecting Phenomena in the Flow Through an Absorbing Medium
Kenji Tomoeda
Flux-free Finite Element Method for Immiscible Two-fluid Flows
Katsushi Ohmori, Norikazu Saito
|
Tuesday, July 1st 14:00 - 16:00
Stabilized, Multiscale and Multiphysics Methods IV
Minisymposium organized by Tayfun Tezduyar, Arif Masud and Thomas Hughes
|
MS055
Room: EXC2.2
|
A Multi-Scale Finite Element Method with Discontinuity Capturing for Reaction Dominated Flow Regimes in Unsteady Turbomachinery Computations
Alessandro Corsini, Filippo Menichini, Franco Rispoli, Andrea Santoriello, Tayfun Tezduyar
|
Tuesday, July 1st 14:00 - 16:00
Computational Methods in Multibody Dynamics Simulation V
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Design and Implementation of a Multibody Code Oriented to HIL Simulation
Paolo Righettini, Alberto Oldani, Roberto Strada, Steven Chatterton
|
Tuesday, July 1st 14:00 - 16:00
Computational Structural Mechanics V
|
TS328
Room: CAS3.2
|
Finite Element Formulation for the Nonlinear Analysis of Masonry Walls
Sandro Brasile, Raffaele Casciaro, Giovanni Formica, Antonio Rosato
|
Tuesday, July 1st 14:00 - 16:00
Multiscale Modelling of Material Behaviour I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Chris Pearce and Eduardo de Souza Neto
|
MS124
Room: EXC1.3
|
Topological Derivative in Multi-Scale Linear Elasticity Models
Sebastián Giusti, Antonio André Novotny, Eduardo Alberto de Souza Neto, Raul Feijoo
Topological Derivative in Multi-Scale Heat Conduction Models
Sebastián Giusti, Antonio André Novotny, Eduardo Alberto de Souza Neto, Raul Feijoo
|
Tuesday, July 1st 14:00 - 16:00
Multiobjective Optimization in Industrial Applications I
Minisymposium organized by Jussi Hakanen and Elina Madetoja
|
MS176
Room: CAS1.3
|
Sparse forward Mode Automatic Differentiation applied to Shape Optimization
Jukka Toivanen, Raino Mäkinen
|
Tuesday, July 1st 14:00 - 16:00
Advances in Computational Mechanics in Honor of Professor Maier III
Minisymposium organized by Eugenio Onate, Claudia Comi and Giorgio Novati
|
MS155
Room: EXC1.1
|
Energy-Residual-Based Approach to Gradient Plasticity
Guido Borino, Castrenze Polizzotto
Application of a Three-Field Natural Neighbour Method in Linear Fracture Mechanics
Li Xiang, Serge Cescotto, Laurent Duchene
|
Tuesday, July 1st 14:00 - 16:00
Thermodynamics Aspects of Metal Behavior at Extreme Loading Rates I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Aleksander Zubelewicz and Wojciech Nowacki
|
MS177
Room: CAS3.4
|
Geometric Reconstruction and Numerical Simulation of 3D Deformation of Unmarked Macroscopically Anisotropic, Homogeneous Materials subjected to Uniaxial Tension at Different Rates of Strain
Matthew Arthington, Nik Petrinic, Clive Siviour, Ben Elliott
|
Tuesday, July 1st 14:00 - 16:00
Computational Methods in Nonlinear Dynamics V
Minisymposium organized by Stefano Lenci and Marian Wiercigroch
|
MS038
Room: CAS2.5
|
Stable Manifold Computations in a Non-Smooth Dynamical System
Ugo Galvanetto
|
Tuesday, July 1st 16:30 - 18:30
Computational Methods in Multibody Dynamics Simulation VI
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Modeling and Control of 3-D Pinching in Full Variables by Soft Fingers under Non-Holonomic Constraints
Morio Yoshida, Suguru Arimoto, Zhi-Wei Luo
|
Tuesday, July 1st 16:30 - 18:30
Numerical Techniques for the Modelling of Material Failure in Solids VI
Minisymposium organized by Xavier Oliver and Francisco Armero
|
MS237
Room: CAS3.7
|
Moving Finite Element Analyses for Dynamic Nonlinear Fracture of Voided Materials
Takehiro Fujimoto, Toshihisa Nishioka
|
Tuesday, July 1st 16:30 - 18:30
Numerical Methods for Gas-Liquid Two-Phase Flow I
Minisymposium organized by Byeong Rog SHIN and Takeo Kajishima
|
MS085
Room: CAS2.5
|
Accurate Prediction of Transitional Flows among Gas, Liquid and Supercritical Fluids
Takashi Furusawa, Satoru Yamamoto
|
Tuesday, July 1st 16:30 - 18:30
Multiscale Modelling of Material Behaviour II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Chris Pearce and Eduardo de Souza Neto
|
MS124
Room: EXC1.3
|
A Two-Scale Approach to Characterisation of Plastic Spin in Ti-6Al-4V at High Rates of Strain
Nik Petrinic, Helen Sarsfield, Matthew Arthington, Julian M. Reed
A Study of a Fully Implicit Integration Algorithm for a Rate-Independent Single Crystal Plasticity with Dislocation Density
Ikumu Watanabe, Daigo Setoyama, Noritoshi Iwata, Koukichi Nakanishi
|
Tuesday, July 1st 16:30 - 18:30
Stabilized, Multiscale and Multiphysics Methods V
Minisymposium organized by Tayfun Tezduyar, Arif Masud and Thomas Hughes
|
MS055
Room: EXC2.2
|
Variational Multiscale High-Resolution Method for the Simulation of Miscible and Immiscible Flow in Heterogeneous Porous Media
Francois-Xavier Dub, Luis Cueto-Felgueroso, Ruben Juanes
|
Tuesday, July 1st 16:30 - 18:30
Advances in Multiphysics Simulation and Experimental Testing of MEMS and NEMS VI
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Attilio Frangi, Narayan Aluru and Subrata Mukherjee
|
MS151
Room: CIN1.1
|
Cohesive Modelling for Spontaneous Adhesion in Microelectromechanical Systems
Raffaele Ardito, Alberto Corigliano, Biagio De Masi, Attilio Frangi
|
Tuesday, July 1st 16:30 - 18:30
A Background to Several Computational Difficulties: The Non-Smooth Evolution of Mechanical Systems Due to Discontinuities of the Velocities In Time or In Space I
Minisymposium organized by Eric Dimnet and Frederico Tochetti
|
MS143
Room: CAS3.6
|
Some Considerations on the Second Order Non Infinitesimal, Solid-Rigid Movements on Increased Mobility Singularities of Kinematical Chains
Igor Fernández de Bustos, Josu Agirrebeitia, Rafael Avilés
|
Tuesday, July 1st 16:30 - 18:30
Thermodynamics Aspects of Metal Behavior at Extreme Loading Rates II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Aleksander Zubelewicz and Wojciech Nowacki
|
MS177
Room: CAS3.4
|
An Efficient CSD/CFD Scheme for Weapon Fragmentation
Orlando Soto, Joseph Baum, Rainald Löhner
|
Tuesday, July 1st 16:30 - 18:30
Development of a Computational Testbed for Studying Near-Surface Phenomena I
Minisymposium organized by Owen Eslinger
|
MS171
Room: CAS1.5
|
Soil Moisture and Heat Transport Modeling to support Simulation of Infrared Imaging
Stacy Howington
CFD Simulation of Three-Dimensional Airflow over a Vegetated Soil Surface
Phu Luong, Robert Bernard, Stacy Howington
|
Tuesday, July 1st 16:30 - 18:30
Advances in Computational Modeling for Environmental Engineering III
Minisymposium organized by Agustí Pérez-Foguet and Rafael Montenegro
|
MS198
Room: CAS1.4
|
Modeling the Transport of Chromium and Fine Sediments with a Meshless Method
Alfredo Emilio Trento, Ana María T. Alvarez
|
Tuesday, July 1st 16:30 - 18:30
STS11: Models and Tools for the Design of a Supersonic Transport Aircraft with Reduced Impact on the Environment
|
STS11
Room: EXC2.1
|
Aerodynamic Design of Innovative Business Jet
Alain Bugeau, Zdenek Johan, Aurélien Merlet, Marc Stojanowski, Sébastien Vigneron, Michel Mallet
|
Wednesday, July 2nd 10:30 - 12:30
Numerical Techniques for the Modelling of Material Failure in Solids VII
Minisymposium organized by Xavier Oliver and Francisco Armero
|
MS237
Room: CAS3.7
|
Failure Detection in Masonry Shells Homogenisation and its Incorporation in Coupled Two-scale Computations
Benoit Mercatoris, Thierry Massart
|
Wednesday, July 2nd 10:30 - 12:30
Extended / Generalized Finite Element Method I
Minisymposium organized by Ted Belytschko, Elisa Budyn, John Dolbow, Nicolas Moës and Giulio Ventura
|
MS037
Room: EXC1.3
|
X-Ray Microtomography, X-3D-Digital Image Correlation and X-FEM Multigrid, a General Tool for 3D Crack Growth Law Identification - PROPAVANFIS Collaboration
Marie-Christine Baïetto-Dubourg, J.Y. Buffière, Alain Combescure, Anthony Gravouil, François Hild, N. Limodin, W. Ludwig, Julien Réthoré, Stéphane Roux, J.-P. Tinnes
An Extended Finite Element Method for Modelling Micro and Nano Inclusions with Imperfect Interfaces
Julien Yvonnet, Charles Toulemonde, Qi-Chang He
|
Wednesday, July 2nd 10:30 - 12:30
Uncertainty Modeling and Quantification in Computational Mechanics VII
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
A Homogenization Based Spectral Stochastic Computational Approach for the Analysis of Multi-phase Periodic Materials with Random Material
M. Tootkaboni, Lori Graham-Brady, Arghavan Louhghalam
|
Wednesday, July 2nd 10:30 - 12:30
Computational Methods in Multibody Dynamics Simulation VII
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Flexible Multibody Dynamics with Linear Deformations: Overvieweing the Basics
Jorge Ambrosio, Maria Augusta Neto
|
Wednesday, July 2nd 10:30 - 12:30
Computational Structural Mechanics VII
|
TS328
Room: CAS3.2
|
Structural Damage Analysis of a Frame Structure Model by Variable Parametric Projection Filter
Nobuyoshi Tosaka, Ryuji Endo
|
Wednesday, July 2nd 10:30 - 12:30
Advanced Computational Methods for Wave Motion IV
Minisymposium organized by Dan Givoli and Geza Seriani
|
MS036
Room: CAS3.9
|
Evaluation and Application of Large-Scale Ultrasound Propagation Simulation in Heterogeneous Media
Yoshiaki Tamura, Yusuke Nakajima, Junko Uebayashi, Yoichiro Matsumoto
Investigation of Nonlinear Waves Dynamic in Protoplanet Disk by Alternative Numerical Methods
Olga Stoyanovskaya, Elvira Kuksheva
|
Wednesday, July 2nd 10:30 - 12:30
Metamodels for High Dimensionality Response Surfaces in Multiobjective Optimization I
Minisymposium organized by George Dulikravich and Marcelo Colaco
|
MS045
Room: CAS1.3
|
Application of Metamodel-Based Robust Design Optimization to Industrial Problems
Stuart J. Bates, Royston D. Jones, Vassili V. Toropov
|
Wednesday, July 2nd 10:30 - 12:30
Constitutive Stability and Fracture: Models and Applications II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pedro Areias and José César de Sá
|
MS064
Room: CAS3.8
|
On Numerical Modelling of Creep Behaviour of Medium Density Polyethylene
Ivica Skozrit, Zdenko Tonkovic
|
Wednesday, July 2nd 10:30 - 12:30
Computational Methods in Composite Materials and Structures I
Minisymposium organized by Anastasia Muliana, Rami Haj-Ali and Marcin Kaminski
|
MS119
Room: CAS3.1
|
A Global-Local Model for the Analysis of Laminated Composite Plates
Lavinia Alves Borges, Julio Cesar Ferreira, Antonio Jose Pinto Marques
|
Wednesday, July 2nd 10:30 - 12:30
Numerical Methods for Gas-Liquid Two-Phase Flow II
Minisymposium organized by Byeong Rog SHIN and Takeo Kajishima
|
MS085
Room: CAS2.5
|
Two-Phase Flow Analysis on the Occurrence of the Liquid Jet into a Bubble in a Convergent Divergent Channel
Kazuya Shimizu, Kazuhiro Hashiguchu, Rie Tachibana, Shintaro Takeuchi, Shu Takagi, Yoichiro Matsumoto
|
Wednesday, July 2nd 10:30 - 12:30
Advanced Computational Descriptions of Macromolecular Materials: from the Atom to the Flow I
Minisymposium organized by Francisco Chinesta, Elias Cueto, Martin Kroger and Tim Phillips
|
MS026
Room: CAS3.6
|
Molecular Dynamics Simulation on cis-1,4 Polybutadiene under Cyclic Deformation: Chain Entanglements and Hysteresis
Kisaragi Yashiro, Yutaka Koga, Masato Naito, Yasuhisa Minagawa, Yoshihiro Tomita
Meshless Stochastic Simulation of Micro-Macro Models arising from Kinetic Theory
Elias Cueto, Manuel Laso, Francisco Chinesta
|
Wednesday, July 2nd 14:00 - 16:00
Metamodels for High Dimensionality Response Surfaces in Multiobjective Optimization II
Minisymposium organized by George Dulikravich and Marcelo Colaco
|
MS045
Room: CAS1.3
|
Low-Boom and Low-Drag Design Exploration for Twin Engine Supersonic Business Jet
Shinkyu Jeong, Koma Sato, Takayasu Kumano, Shigeru Obayashi
Large Scale Optimization based on Adaptive Metamodelling
Andrey A. Polynkin, Vassili V. Toropov
|
Wednesday, July 2nd 14:00 - 16:00
Transition Modelling I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Erik Dick, Mark Savill, Witold Elsner and Franco Magagnato
|
MS192
Room: CAS2.3
|
Prediction of the Transitional Flow of Turbine Blades with DDES and LES
Franco Magagnato, Martin Gabi
|
Wednesday, July 2nd 14:00 - 16:00
Extended / Generalized Finite Element Method II
Minisymposium organized by Ted Belytschko, Elisa Budyn, John Dolbow, Nicolas Moës and Giulio Ventura
|
MS037
Room: EXC1.3
|
An X-FEM Approach for Modeling Closed Discontinuities under Large Sliding Contact
Ionel Nistor, Martin Guiton, Patrick Massin, Nicolas Moës
|
Wednesday, July 2nd 14:00 - 16:00
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices II
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Size Effect in a Cellular Automata Model for Systems of Interacting Dislocations
Valentina Beato, Stefano Zapperi
|
Wednesday, July 2nd 14:00 - 16:00
Image-Based Computational Modelling of Materials I
Minisymposium organized by M.A. Siddiq Qidwai and Andrew B. Geltmacher
|
MS210
Room: CAS3.7
|
Rubber Filled with Carbon Black from the Nanoscopic Structure to the Macroscopic Behaviour
Aurélie Jean, Dominique Jeulin, Sabine Cantournet, Samuel Forest, Franck N‘Guyen
|
Wednesday, July 2nd 14:00 - 16:00
Minisymposium on Performance-Based Structural Design Optimization II
Minisymposium organized by Nikos Lagaros , Christopher Foley and Hongbing Fang
|
MS047
Room: CAS1.6
|
Aeroelastic Analisys and Optimal Design of Axial Multistage Fans and Compressors
Michele Ferlauto
|
Wednesday, July 2nd 14:00 - 16:00
Inverse Problems: Recent Advances in Methodology and Techniques III
Minisymposium organized by Barbara Kaltenbacher and Roland Potthast
|
MS054
Room: CAS1.8
|
Body Shape Reconstruction by its Scattered Patterns
Oleg Kusyi, Nikolai Voitovich
|
Wednesday, July 2nd 14:00 - 16:00
Fracture Mechanics II
|
TS313
Room: CAS3.10
|
An Implicit Level Set Algorithm for Hydraulic Fractures
Anthony Peirce, Emmanuel Detournay
|
Wednesday, July 2nd 14:00 - 16:00
Computational Modelling of Locomotor Systems II
Minisymposium organized by Markus Böl, Stefanie Reese and Bob Svendsen
|
MS208
Room: PGL
|
Non-Equilibrium Mechanics of Motor-Activated Gels and Living Cells
Fred MacKintosh
|
Wednesday, July 2nd 14:00 - 16:00
Contact Mechanics : Modelling, Analysis and Applications IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Mircea Sofonea, José R. Fernandez and Georgios E. Stavroulakis
|
MS039
Room: CAS0.1
|
Rod Cluster Drop Time Simulation using a Continuous Contact Formulation Extended to Beams
Marc Kham, Mohamed Torkhani, Patrick Massin, Hachmi Bendhia
|
Wednesday, July 2nd 14:00 - 16:00
Uncertainty Modeling and Quantification in Computational Mechanics VIII
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Uncertainty of Design Parameters and their influence on Dynamic Properties of MEMS Microresonators
Adam Martowicz, Irina Codreanu, Tadeusz Uhl
Sand Transport in Surface Waters: An Uncertainty Analysis
André Fortunato, Lígia Pinto, Paula Freire, Xavier Bertin, Anabela Oliveira
|
Wednesday, July 2nd 14:00 - 16:00
Mechanics of Tires and Pavements: Material and Computational Modeling II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Michael Kaliske and Markus Oeser
|
MS182
Room: CAS1.5
|
A Computational Model to Investigate the Sound Radiation from Rolling Tires
Jan Biermann, Otto von Estorff
A Meshfree Procedure for the Microscopic Simulation and Design of Rubber Compounds and its Application to Multi-Scale Simulation of Tires
C. T. Wu, Masataka Koishi, Gregg Skinner, Hiroki Shimamoto
|
Wednesday, July 2nd 16:30 - 18:30
Computational Geomechanics I
|
TS314
Room: CIN0.2
|
Absorbing Boundary Conditions and the Perfectly Matched Layer Model in Elastic Wave Propagation Analysis
Josif Josifovski, Vasil Vitanov, Otto von Estorff
|
Wednesday, July 2nd 16:30 - 18:30
Fracture Mechanics III
|
TS313
Room: CAS3.10
|
Evaluation of Interference with Hole and Surface Crack using the VNA-FEM Alternating Method
Toshihisa Nishioka, Yusuke Hirooka, Youngjun Won, Guangqin Zhou, Takehiro Fujimoto
|
Wednesday, July 2nd 16:30 - 18:30
Computational Methods in Multibody Dynamics Simulation IX
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Dynamic Interaction Analysis of a Shinkansen Train and Railway Structure after Derailment during an Earthquake
Makoto Tanabe, Hajime Wakui, Nobuyuki Matsumoto, Masamichi Sogabe, Yasuko Tanabe
|
Wednesday, July 2nd 16:30 - 18:30
STS02: Large Eddy Simulation: Research and Industrial Applications
|
STS02
Room: EXC2.1
|
Large-Eddy Simulation of Shock-Induced Separation of a Turbulent Bondary Layer
Neil D. Sandham, Emile Touber
|
Wednesday, July 2nd 16:30 - 18:30
Computational Methods in Composite Materials and Structures III
Minisymposium organized by Anastasia Muliana, Rami Haj-Ali and Marcin Kaminski
|
MS119
Room: CAS3.1
|
Analyses of the Effect of Grain Boundaries in Multifunctionality of Sic-Si3n4 Nanocomposites
Vikas Tomar, Vikas Samvedi
|
Wednesday, July 2nd 16:30 - 18:30
Mechanical Modeling of Wood and Wood Based Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Josef Eberhardsteiner, Michael Kaliske and Karin Hofstetter
|
MS187
Room: CAS3.6
|
A 3D Coupled Moisture-Stress Numerical Analysis for Timber Structures
Stefania Fortino, Antti Hanhijärvi, Florian Mirianon, Tomi Toratti
|
Wednesday, July 2nd 16:30 - 18:30
Immersed Boundary and Immersed Interface Methods IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
Immersed Boundary Method applied to Simplified Drilling Problems
Elie Luis Padilla, André Martins, Aristeu Silveira-Neto
|
Wednesday, July 2nd 16:30 - 18:30
Environment II
|
TS310
Room: CAS1.4
|
Study of Cascade Impacter Pollen Sampling Device
Hideki Aoi, Kunio Funami, Hiroyuki Miyamoto, Yue Zhao, Yorito Ishikawa
Validation of an Experimental Model of the Air Flow over a Conveyor Belt. Implications on Dust Emission
Javier Toraño, Isidro Diego, Susana Torno, Judith Velasco
|
Wednesday, July 2nd 16:30 - 18:30
Computational Fluid Dynamics II
|
TS303
Room: CAS3.9
|
Body-Fitted Cartesian Grid Method for Complex High Reynolds Number Flows
Keiichiro Fujimoto, Kozo Fujii, Z. J. Wang
|
Wednesday, July 2nd 16:30 - 18:30
Inverse Problems: Recent Advances in Methodology and Techniques IV
Minisymposium organized by Barbara Kaltenbacher and Roland Potthast
|
MS054
Room: CAS1.8
|
Fingerprint Encryption using Fractional Fourier Transform
Juan M. Vilardy, Cesar O. Torres, Lorenzo Mattos
|
Wednesday, July 2nd 16:30 - 18:30
Computations of Fluid Flows at the Solid-Fluid Interfaces I
Minisymposium organized by Dimitrios Papavassiliou and Lloyd Lee
|
MS203
Room: CAS2.2
|
An Iterative Process for the Implicit Evaluation of Forces in the Immersed Boundary Method, using the Virtual Physical Method
João Marcelo Vedovoto, Felipe Pamplona Mariano, Aristeu Silveira-Neto
|
Wednesday, July 2nd 16:30 - 18:30
Multiscale Mechanics of Interfaces
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Christoph Eberl, Abhijit Mukherjee, Siegfried Schmauder and Shailendra Joshi
|
MS115
Room: CAS1.3
|
Multiscale Modeling of Heterogeneous Adhesives - Effects of Particle Decohesion
Mohan G. Kulkarni, Philippe H. Geubelle, Karel Matous
|
Wednesday, July 2nd 16:30 - 18:30
Adaptive Modeling in Computational Mechanics I
Minisymposium organized by J. Tinsley Oden and Serge Prudhomme
|
MS236
Room: EXC. Congress Room
|
An A Posteriori Error Estimator for a Hierarchical Model Dimension Reduction
Alexandre Ern, Simona Perotto, Alessandro Veneziani
|
Wednesday, July 2nd 16:30 - 18:30
Contact Mechanics : Modelling, Analysis and Applications V
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Mircea Sofonea, José R. Fernandez and Georgios E. Stavroulakis
|
MS039
Room: CAS0.1
|
Design Method for Wear in Transmission Systems
Damien Herisson, Benoit Delattre, Geoffrey Jamart, Thi Mac Lan Nguyen, Rachel Marie Pradeilles-Duval, Habibou Maitournam, Siegfried Fouvry
|
Wednesday, July 2nd 16:30 - 18:30
Computational Fracture Mechanics of Heterogeneous Materials and Structures II
Minisymposium organized by Noriyuki Miyazaki and Toru Ikeda
|
MS109
Room: CAS3.8
|
Different Characteristics of Unstable Atoms in Monatomic Amorphous Ni and Al: Local Lattice Instability Analysis
Masaomi Nishimura, Kisaragi Yashiro, Yoshihiro Tomita
|
Wednesday, July 2nd 16:30 - 18:30
Minisymposium in the Honor of Michel Bernadou‘s 65th Birthday IV
Minisymposium organized by John Cagnol and Roland Glowinski
|
MS073
Room: EXC1.2
|
Numerical Simulation of Smart Cells with a Frontal Microperforated Wall devised as Sound Absorbers
Alfredo Bermudez, Pablo Gamallo, Luis Hervella-Nieto, Andres Prieto
|
Wednesday, July 2nd 16:30 - 18:30
Image-Based Computational Modelling of Materials II
Minisymposium organized by M.A. Siddiq Qidwai and Andrew B. Geltmacher
|
MS210
Room: CAS3.7
|
An Analysis of Damage Accumulation in Composite Materials using Computational Micromechanics
Essam Totry, Carlos Gonzalez, Javier LLorca
Experimental and Numerical Modeling of Solid Propellants using Microtomography
Karel Matous, Filippo Maggi, Brett Collins, Hyunsun Lee, Thomas Jackson
|
Wednesday, July 2nd 16:30 - 18:30
Multiple-Scale Physics and Computation II
|
TS323
Room: CAS3.4
|
Magnetic-Structural Coupled Analysis by Hierarchical Domain Decomposition Method
Shin-ichiro Sugimoto, Shinobu Yoshimura, Hiroshi Kanayama
Computer Simulations of Magnetoplasticity in Nonmagnetic Materials
Romuald Kotowski, Vladimir I. Alshits, Aldona Drabik, Piotr Tronczyk
|
Wednesday, July 2nd 16:30 - 18:30
Numerical Methods for Fluid-structure Interactions III
Minisymposium organized by Hester Bijl and Jan Vierendeels
|
MS087
Room: CAS3.5
|
Influence of the Drilling Fluid Flow on the Dynamics of a Drill-String
Thiago Ritto, Rubens Sampaio, Christian Soize
Coupled Analysis of High-Speed Flow and Large-Deformable Structure using Partitioned Solution Method with Level Set Function.
Gaku Hashimoto, Kenji Ono, Hirohisa Noguchi
|
Wednesday, July 2nd 16:30 - 18:30
Recent Advances in Numerical Methods for Hyperbolic Problems I
Minisymposium organized by Sergey Karabasov, Vassily Goloviznin, Tatyana Kozubskaya, Yoko Takakura, Ralf Deiterding and Maria Lukacova
|
MS060
Room: CAS2.4
|
A Third-Order Computational Method for Numerical Flux to guarantee Positive Difference Coefficients for Advection-Diffusion Equations
Katsuhiro Sakai, Yasufumi Kato, Takayuki Nakamura
|
Thursday, July 3rd 10:30 - 12:30
STS08: New Technologies in Aero-Engines
|
STS08
Room: EXC2.1
|
Selected Aerothermal CFD Analyses of High-Pressure Turbine Topics within the AITEB-2 Project
Erik Janke, Howard Hodson, B. Facchini, I. Popovic, K. Lehmann, C. Georgakis, L. Pons, E. Lutum, F. Wallin, Bill Dawes, F. Favaretto, L. Toni
|
Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Delamination Study of Z-Pinned Composite Laminates
Tiziana Turetta, Alessia Cottone, Giuseppe Giambanco
|
Thursday, July 3rd 10:30 - 12:30
Numerical Modeling of Coupled Problems in Geo- and Durability Mechanics I
Minisymposium organized by Günther Meschke and Xikui Li
|
MS148
Room: CAS1.4
|
Numerical Model of Calcium Leaching in Cementitious Materials, considering the Process Kinetics and Advective Calcium Transport
Dariusz Gawin, Francesco Pesavento, Bernhard A. Schrefler
|
Thursday, July 3rd 10:30 - 12:30
Propagation of Electron, Elastic, and Electromagnetic Waves in Nonhomogeneous Waveguides and Nanostructures
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Lev Baskin, Pekka Neittaanmäki and Boris Plamenevsky
|
MS066
Room: CIN0.2
|
Resonance Frequency and Young’s Modulus of Composite Porous Silicon/Silicon Cantilever Beams
Somashekara Bhat, Renny Edwin Fernandez, Sara Stolyarova, Enakshi Bhattacharya
|
Thursday, July 3rd 10:30 - 12:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices IV
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Computer Simulations of Dislocation Motion in Crystals
Jerzy P. Nowacki, Vladimir I. Alshits, Romuald Kotowski, Piotr Tronczyk
|
Thursday, July 3rd 10:30 - 12:30
Advances in Boundary Element Methods III
Minisymposium organized by Yijun Liu, Martin Schanz, Naoshi Nishimura, Zhenhan Yao, Marc Bonnet, Ernie Pan, Attilio Frangi and Mitch Denda
|
MS043
Room: CIN2.1
|
Simple a Posteriori Error Estimators for the h-Version of the Boundary Element Method
Samuel Ferraz-Leite, Dirk Praetorius
|
Thursday, July 3rd 10:30 - 12:30
Computational Fluid Dynamics III
|
TS303
Room: CAS3.9
|
An Updated Lagrangian Approach for Fluid-Structure Problems based on Natural Elements and the Method of Characteristics
Andrés Galavís, David González, Elias Cueto, Francisco Chinesta
|
Thursday, July 3rd 10:30 - 12:30
Computational Fracture Mechanics of Heterogeneous Materials and Structures III
Minisymposium organized by Noriyuki Miyazaki and Toru Ikeda
|
MS109
Room: CAS3.8
|
Deformation Analysis of Gun Bullet’s Collision
Hidetoshi Sakamoto, Tetsuya Hiwatashi, Toshihiko Yamaguchi
|
Thursday, July 3rd 10:30 - 12:30
Inverse Problems for Parameter Identification II
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
Inverse Finite Element Method for Real-Time Structural Health Monitoring: Application to Fiber-Optic Strain Measurements
Alexander Tessler, Massimiliano Mattone
|
Thursday, July 3rd 10:30 - 12:30
Computations of Fluid Flows at the Solid-Fluid Interfaces II
Minisymposium organized by Dimitrios Papavassiliou and Lloyd Lee
|
MS203
Room: CAS2.2
|
Unsteady Computational Analysis of Supersonic Underexpanded Jet Impinging on an Inclined Flat Plate
Yoshinori Goto, Kansai McIlroy, Kozo Fujii
|
Thursday, July 3rd 10:30 - 12:30
Mechanical Modeling of Wood and Wood Based Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Josef Eberhardsteiner, Michael Kaliske and Karin Hofstetter
|
MS187
Room: CAS3.6
|
A Multi-Scale Analysis of Wood Physical Properties by the Reinforced-Matrix Principle: Formulation by Mori-Tanaka Theory
Hiroyuki Yamamoto, Joseph Gril, Tancrede Almeras
|
Thursday, July 3rd 14:00 - 16:00
Damage and Interfacial Delamination Modelling in Composite Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Competition between Penetration and Debonding at an Interface in Brittle Matrix Composites
Eric Martin, Benoit Poitou, Dominique Leguillon
|
Thursday, July 3rd 14:00 - 16:00
Numerical Modeling of Coupled Problems in Geo- and Durability Mechanics II
Minisymposium organized by Günther Meschke and Xikui Li
|
MS148
Room: CAS1.4
|
Numerical Investigation on Surface Roughness Effect of Sand Erosion Phenomena in 90 Degree Bend
Masaya Suzuki, Makoto Yamamoto
|
Thursday, July 3rd 14:00 - 16:00
Coupled Multifield Problems and Smart Structures II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Thomas Wallmersperger, Bernd Kröplin and Erasmo Carrera
|
MS086
Room: CAS3.4
|
Hierarchic 2D Models for Piezoelectric Sandwich Shells
Michele D‘Ottavio, Salvatore Brischetto, Olivier Polit
Fracture Criterion for Piezoelectric Ceramics using the Exact Boundary Conditions applied to the Crack Surfaces
Yael Motola, Leslie Banks-Sills
|
Thursday, July 3rd 14:00 - 16:00
Computer Simulation in Vehicle Design and Transport I
|
TS321
Room: CAS1.5
|
Virtual Prototyping of a Car Direction Indicator Switch using Haptic Feedback
Hunor Etele Erdelyi, Doru Talaba, Csaba Antonya
|
Thursday, July 3rd 14:00 - 16:00
Computational Materials Mechanics I
|
TS318
Room: CAS3.8
|
A new Efficient Explicit Numerical Scheme for Integration of DAE: Application to Constitutive Equations in Solid Mechanics
Marko Vrh, Miroslav Halilovič, Boris Štok
|
Thursday, July 3rd 14:00 - 16:00
Recent Advances in Numerical Methods for Hyperbolic Problems III
Minisymposium organized by Sergey Karabasov, Vassily Goloviznin, Tatyana Kozubskaya, Yoko Takakura, Ralf Deiterding and Maria Lukacova
|
MS060
Room: CAS2.4
|
A Second Order Method for the Resolution of the Shallow Water Equations with Turbulent Term
Jaime Fe, Luis Cueto-Felgueroso, Fermín Navarrina
|
Thursday, July 3rd 14:00 - 16:00
Biofluids and Coupled Problems in Biomechanics IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Wolfgang Wall, Marek Behr, Matteo Pasquali and Alberto Figueroa
|
MS080
Room: CIN0.1
|
Numerical Simulation of Cerebrospinal Fluid Flow by Fictitious Domain Method
Hiroshi Suito, Takuya Ueda
|
Thursday, July 3rd 14:00 - 16:00
Meshless and Related Methods I
Minisymposium organized by Janusz Orkisz, Sergio Idelsohn and Suvranu De
|
MS098
Room: EXC1.3
|
Incompressible Gas-Liquid Two Phase Flow Analysis using a Particle Method for Fuel Cells
Masahiro Kondo, Seiichi Koshizuka, Masato Takimoto
|
Thursday, July 3rd 14:00 - 16:00
High-performance Computing in Computational Mechanics V
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
Hybrid Programming of Krylov Type Iterative Solvers on SMP Clusters
George Pashos, Antony Spyropoulos, Nikos Anastopoulos, Georgios Goumas, Nectarios Koziris, Andreas Boudouvis
|
Thursday, July 3rd 16:30 - 18:30
Multiscale Damage and Failure Mechanics of Engineering Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by J. Woody Ju, Lizhi Sun, Pierre Ladeveze and Olivier Allix
|
MS149
Room: CAS3.7
|
A Non Local Anisotropic Damage Model for Brittle Materials
Enrico Papa, Gaetano Napoli, Alberto Taliercio, Paolo Taranto
|
Thursday, July 3rd 16:30 - 18:30
High-performance Computing in Computational Mechanics VI
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
An Architecture for the Automatic Development of High Performance Multi-physics Simulators
Felix Santos, Eduardo Brito Jr., José Maria Silva
|
Thursday, July 3rd 16:30 - 18:30
Application of Computational Mechanics to Geoscience Problems: Computational Geosciences II
Minisymposium organized by Chongbin Zhao, A. Murakami and K. T. Chau
|
MS178
Room: CAS1.7
|
A Study on Optimal Strength Distribution of Rigid-Plastic Body
Jun Saito, Toshihiro Asakura, Takeshi Tamura, Shun-ichi Kobayashi
Fundamental Study on Shape Optimization of a Rigid-Plastic Structure
Shun-ichi Kobayashi, Kana Yanagimoto, Takeshi Tamura
|
Thursday, July 3rd 16:30 - 18:30
Damage and Interfacial Delamination Modelling in Composite Materials III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
A Generalized Differential Quadrature Solution for Laminated Composite Shells of Revolution
Francesco Tornabene, Erasmo Viola
|
Thursday, July 3rd 16:30 - 18:30
Computational Materials Mechanics II
|
TS318
Room: CAS3.8
|
Non Linear Viscoelasticity in a Plastic Damageable Aggregate Material sensitive to Hydrostatic Pressure
Arnaud Duchosal, Viet-Dung Le, Michel Gratton, Mickael Caliez, Didier Picart
|
Thursday, July 3rd 16:30 - 18:30
STS06: Wake Vortex Research in Europe
|
STS06
Room: EXC2.1
|
Status of ONERA Research on Wake Vortex Evolution and Alleviation in the Framework of National Activities and European Collaboration
Eric Coustols, Odile Labbe, Frédéric Moens, Pascal Molton, Laurent Jacquin
|
Thursday, July 3rd 16:30 - 18:30
Meshfree and Generalized/Extended Finite Element Methods III
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Arlequin Method – Application to Welded Structure Calculations
Thi Thuy Trang Lê, Louis Augustins, Habibou Maitournam
|
Thursday, July 3rd 16:30 - 18:30
Advances in Time-Integration III
Minisymposium organized by Adrian Lew, Eric Darve and Isaac Harari
|
MS084
Room: CAS3.5
|
Two Geometric Integrators for Finite-Strain Viscoplasticity with Kinematic Hardening
Alexey V. Shutov, Reiner Kreissig
|
Friday, July 4th 10:30 - 12:30
Adaptive Higher Order Variational Methods for Aerospace Applications II
Minisymposium organized by Norbert Kroll, Jaap van der Vegt and Remi Abgrall
|
MS057
Room: CAS2.4
|
Construction of very High Order Residual Distribution Schemes for Compressible Flow Problems
Rémi Abgrall, Adam Larat, Mario Ricchiuto
High-Order/hp-Adaptive Discontinuous Galerkin Finite Element Methods for Compressible Fluid Flows
Stefano Giani, Paul Houston
|
Friday, July 4th 10:30 - 12:30
Multiscale Problems in the Life Sciences I
Minisymposium organized by Vincenzo Capasso and Willi Jaeger
|
MS131
Room: CIN0.2
|
Conservative upwind finite-element method for the Keller-Segel system of chemotaxis
Norikazu Saito
|
Friday, July 4th 10:30 - 12:30
Patient Specific Computational Modelling I
Minisymposium organized by Perumal Nithiarasu and Rainald Lohner
|
MS070
Room: CAS1.4
|
Peripheral Bypass Graft Atherogenisis Study using Near-Wall Convective Transport Normal to the Wall, given by a Series Expansion of Lagrangian Dynamics
Alberto Gambaruto, Denis Doorly, Peter Franke
|
Friday, July 4th 10:30 - 12:30
Inverse Problems for Parameter Identification V
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
Estimating the Uncertainty Range on the Elasto-Plastic Material Parameters determined through Mixed Numerical-Experimental Techniques
Steven Cooreman, David Lecompte, Hugo Sol, Sam Coppieters, Dimitri Debruyne, John Vantomme
|
Friday, July 4th 10:30 - 12:30
Structural Stability I
Minisymposium organized by Herbert Mang and Zsolt Gaspar
|
MS083
Room: EXC2.2
|
Buckling of a Spindle Shaped Tensairity Column under Compression: A Numerical–Experimental Study
Theofanis Plagianakos, Rolf Luchsinger, Rene Crettol
|
Friday, July 4th 10:30 - 12:30
Multiscale Methods in Computer Materials Science I
Minisymposium organized by Maciej Pietrzyk, Peter Hodgson and Tadeusz Burczynski
|
MS033
Room: CAS3.6
|
An Atomistic-to-Continuum Coupling Method for Non-Equilibrium Heat Transfer in Solids
Gregory J. Wagner, Reese E. Jones, Jeremy A. Templeton
Database-accelerated Local Quasicontinuum Method Based on First-principles Density-functional Theory
Naohiro Toda, Hajime Kimizuka, Shigenobu Ogata
|
Friday, July 4th 10:30 - 12:30
Efficient Computational Methods for Coupled Problems I
Minisymposium organized by Harald van Brummelen and Tayfun Tezduyar
|
MS096
Room: CAS3.4
|
Fluid-Structure Interaction and Multi-Body Contact. Application to Aortic Valves
Matteo Astorino, Jean-Frédéric Gerbeau, Olivier Pantz, Karim Frédéric Traoré
|
Friday, July 4th 10:30 - 12:30
Computational Modeling in Cardiovascular Mechanics III
Minisymposium organized by Gerhard A. Holzapfel, Jay D. Humphrey, Charles A. Taylor and David A. Vorp
|
MS099
Room: CIN1.1
|
The Role of the Intra-luminal Thrombus in Abdominal Aortic Aneurysm Rupture
T. Christian Gasser, Martin Auer, Fausto Labruto, Roy Joy, Jesper Swedenberg
|
Friday, July 4th 10:30 - 12:30
Concrete Subject to High Temperature and Fire I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Carmelo Majorana and Gabriel Khoury
|
MS100
Room: CAS3.10
|
Assessment of the Thermal Spalling Risk of Concrete Structures during Fire by Means of a Finite Element Model
Francesco Pesavento, Dariusz Gawin, Bernhard A. Schrefler
|
Friday, July 4th 10:30 - 12:30
Advances in Boundary Element Methods VI
Minisymposium organized by Yijun Liu, Martin Schanz, Naoshi Nishimura, Zhenhan Yao, Marc Bonnet, Ernie Pan, Attilio Frangi and Mitch Denda
|
MS043
Room: CIN2.1
|
A Complex Variable Symmetric Boundary Element Model for Polygonal Kirchhoff Plates
Mirko Mazza, Maurizio Aristodemo
|
Friday, July 4th 10:30 - 12:30
Meshless and Related Methods III
Minisymposium organized by Janusz Orkisz, Sergio Idelsohn and Suvranu De
|
MS098
Room: EXC1.3
|
Analysis of an MLPG Solution for 3D Potential Problems
Annamaria Mazzia, Giorgio Pini, Flavio Sartoretto
|
Friday, July 4th 10:30 - 12:30
Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia
|
MS079
Room: PGL
|
Seismic Initiation Mechanisms of Fast Granular Flows
Pablo Mira, Jose Antonio Fernández-Merodo, Manuel Pastor, Laura Tonni
|
Friday, July 4th 10:30 - 12:30
Application of Computational Mechanics to Geoscience Problems: Computational Geosciences III
Minisymposium organized by Chongbin Zhao, A. Murakami and K. T. Chau
|
MS178
Room: CAS1.7
|
Two Dimensional Electroseismic Modeling
Patricia M. Gauzellino, Juan E. Santos, Fabio I. Zyserman
Particle Finite Element Method and Level Set Method for the Simulation of the Failure of Rockfill Dams due to Overtopping Phenomena
Antonia Larese de Tetto, Riccardo Rossi, Eugenio Oñate, Sergio Idelsohn
|
Friday, July 4th 10:30 - 12:30
Numerical Modelling of Hydrodynamic Geophysical Flows II
Minisymposium organized by Tomas Chacon Rebollo and Edie Miglio
|
MS062
Room: CAS2.6
|
A MUSTA Strategy to discretize the Coulomb Friction Term in Avalanches Models
Manuel J. Castro, Enrique D. Fernández-Nieto, Jose M. González-Vida
|
Friday, July 4th 14:00 - 16:00
Theory and Applications of Discontinuous Galerkin Methods V
Minisymposium organized by Slimane Adjerid, Clint Dawson, Adrian Lew, Beatrice Riviere and Chi-Wang Shu
|
MS130
Room: CAS2.3
|
Mortar Couplings of Discontinuous Galerkin and Mixed Finite Element Methods
Ivan Yotov
|
Friday, July 4th 14:00 - 16:00
Advances in Finite Element Method II
|
TS315
Room: CAS2.1
|
Edge-Based Implementation for the NSGS Method
Isaac Santos, Lucia Catabriga, Regina Almeida
|
Friday, July 4th 14:00 - 16:00
Numerical Modelling of Hydrodynamic Geophysical Flows III
Minisymposium organized by Tomas Chacon Rebollo and Edie Miglio
|
MS062
Room: CAS2.6
|
High Order Schemes on Unstructured Meshes for Two-Phase Free-Surface Flow with Stiff Friction
Eleuterio Toro, Michael Dumbser, Arturo Hidalgo, Carlos Pares
|
Friday, July 4th 14:00 - 16:00
Inverse Problems for Parameter Identification VI
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
Comparison between Multiobjectif and Classical Algorithms for Identifying Damage Law Parameters using an Inverse Methodology
Eric Gildemyn, Camille Rertob, Philippe Dal Santo, Alain Potiron, Delphine Saïdane
|
Friday, July 4th 14:00 - 16:00
Computational Materials Mechanics IV
|
TS318
Room: CAS3.8
|
Meso-Scale Modelling of Plasticity in Two Phase Composite Materials
Katherine Acton, Lori Graham-Brady
|
Friday, July 4th 14:00 - 16:00
Efficient Computational Methods for Coupled Problems II
Minisymposium organized by Harald van Brummelen and Tayfun Tezduyar
|
MS096
Room: CAS3.4
|
Time-Accurate, High-Order Schemes for the Numerical Simulation of Multiphase Flow in Porous Media
Luis Cueto-Felgueroso, Ruben Juanes
|
Friday, July 4th 14:00 - 16:00
Topology Optimization in Civil and Structural Engineering IV
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski
|
MS065
Room: CAS0.1
|
Optimization of Periodic Microstructures using Shape and Topology Derivatives
Anca-Maria Toader
|
Friday, July 4th 14:00 - 16:00
Minisymposium on Computational Methods for Seismic Analysis and Design I
Minisymposium organized by Manolis Papadrakakis, Dimos Charmpis and Nikos Lagaros
|
MS136
Room: CIN.SalaVolpi
|
Developing of a Shaking Table Control Algorithm
Boris Blostotsky, Grigory Agranovich, Yuri Ribakov
|
Friday, July 4th 14:00 - 16:00
Industrial Applications II
|
TS316
Room: CAS1.6
|
Numerical Simulation of a Full High Pressure Compressor
Nicolas Gourdain, Jen-Francois Boussuge, Michael Stoll
Three Dimensional Tomography for Fluid Flow Modelling in Dendritic Structures of Directionally Solidified Nickel-Base Superalloy
Jonathan Madison, Jonathan Spowart, David Rowenhorst, Katsuyo Thornton, Tresa Pollock
|
Friday, July 4th 14:00 - 16:00
Meshless and Related Methods IV
Minisymposium organized by Janusz Orkisz, Sergio Idelsohn and Suvranu De
|
MS098
Room: EXC1.3
|
Application of a Three-Fields Natural Neighbour Method in Elastoplasticity
Li Xiang, Serge Cescotto, Laurent Duchene
|
Friday, July 4th 14:00 - 16:00
Boundary Element Method I
|
TS300
Room: CIN0.2
|
Boundary Element Method Solution in the Case of Concentrated Forces and Moments
Efstathios E. Theotokoglou, George Tsamasphyros
|
Friday, July 4th 16:30 - 18:30
Meshfree and Generalized/Extended Finite Element Methods VI
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Advances on the Application of the FV-MLS Method for the Compressible Euler and Navier-Stokes Equations to High Accuracy Demanding Applications
Xesus Nogueira, Luis Cueto-Felgueroso, Ignasi Colominas, Fermín Navarrina, Manuel Casteleiro
The Margination Dynamics of Non-Spherical Particles in Laminar Flows
Milos Kojic, Nenad Filipovic, B. Stojanovic, I. Vlastelica, Mauro Ferrari, Paolo Decuzzi
|
Friday, July 4th 16:30 - 18:30
Minisymposium on Computational Methods for Seismic Analysis and Design II
Minisymposium organized by Manolis Papadrakakis, Dimos Charmpis and Nikos Lagaros
|
MS136
Room: CIN.SalaVolpi
|
Non Linear Static Analyses of RC Frame Structures: Influence of Corrosion on Seismic Response
Luisa Berto, Anna Saetta, Paola Simioni, Renato Vitaliani
|
Friday, July 4th 16:30 - 18:30
Multiscale Damage and Failure Mechanics of Engineering Materials V
Joint IACM – IUTAM Minisymposium
Minisymposium organized by J. Woody Ju, Lizhi Sun, Pierre Ladeveze and Olivier Allix
|
MS149
Room: CAS3.7
|
Modelling Damage Progression in Stiffened Composite Panels under Impact
Alastair F. Johnson, Nathalie Toso-Pentecôte, Mickael Guichard
|
Friday, July 4th 16:30 - 18:30
Topology Optimization in Civil and Structural Engineering V
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski
|
MS065
Room: CAS0.1
|
Inverse Homogenization and Optimal Design of Composite Structures for Strength and Stiffness
Robert Lipton, Michael Stuebner
|
Friday, July 4th 16:30 - 18:30
Computational Modeling in Cardiovascular Mechanics V
Minisymposium organized by Gerhard A. Holzapfel, Jay D. Humphrey, Charles A. Taylor and David A. Vorp
|
MS099
Room: CIN1.1
|
Numerical Study of Non-Newtonian Inelastic Fluid Flow in a 2D Bifurcation at Ninety Degrees
Helder Matos, Paulo Oliveira
|
Friday, July 4th 16:30 - 18:30
Numerical Modelling of Hydrodynamic Geophysical Flows IV
Minisymposium organized by Tomas Chacon Rebollo and Edie Miglio
|
MS062
Room: CAS2.6
|
Modeling and Simulation of Turbidity Currents
Tomas Morales de Luna, Manuel J. Castro, Carlos Parés Madroñal, Enrique Fernández Nieto
|
Friday, July 4th 16:30 - 18:30
Optimization and Inverse Engineering for Industrial Applications III
Minisymposium organized by Michele Chiumenti and Valentino Pediroda
|
MS106
Room: CAS1.8
|
Practical Shape Optimization Method for Design of Three Dimensional Structure
Masatoshi Shimoda, Shintaro Motora, Hideyuki Azegami
|
Friday, July 4th 16:30 - 18:30
Industrial Applications III
|
TS316
Room: CAS1.6
|
Characterization of the Austenitic Stainless Steel: Design, Simulation and Experimental Testing of Cupping Tool for the Deep Drawing Process
Juan Carlos Cisneros, Fernando Torres, Daniel Sola, Emilio Royo, Mª José Oliveros
|
Friday, July 4th 16:30 - 18:30
Efficient Computational Methods for Coupled Problems III
Minisymposium organized by Harald van Brummelen and Tayfun Tezduyar
|
MS096
Room: CAS3.4
|
Heat and Moisture Transfer, Deformation and Stress Analysis during Drying of Ceramic Bricks
Daniel Avelino, Joselito da Silva, Severino Farias Neto, Antonio G.B. de Lima
Development of a Finite Elements based on Software Tool for the Global Thermomechanical Analysis of Plate-Fin Heat Exchangers
Johan Dib, François Bilteryst, Jean-Louis Batoz, Ivan Lewon
|
Friday, July 4th 16:30 - 18:30
Patient Specific Computational Modelling III
Minisymposium organized by Perumal Nithiarasu and Rainald Lohner
|
MS070
Room: CAS1.4
|
Impact Simulation related to the Mechanism of Diffuse Brain Injury using the Voxel Head Model
Dai Watanabe, Kohei Yuge, Tetsuya Nishimoto, Shigeyuki Murakami, Hiroyuki Takao
|
Friday, July 4th 16:30 - 18:30
Modelling and Optimisation for Coupled Multi-Physics Processes II
Minisymposium organized by Francois Bay and Mark Cross
|
MS059
Room: CAS1.7
|
Numerical Studies on Aero-acoustic Phenomena Associated with Wall Bounded Shear Flow
Debasish Biswas, Koichi Ohtomi
Design of Thermal Properties for Maximum Penetration
Ivo Babuska, Robert Lipton, Michael Stuebner
|
