Full Technical ProgrammeSubject to changes. This version is updated according to the last-minute information. |
| Tuesday, June 11 |
|
| Wednesday, June 12 |
|
|
10:00 - 10:45 Plenary I - Prof. Amine Benzerga | WeM03P Room: Maschinenhalle Chair: Anna Pandolfi |
Modeling and simulation of ductile fracture A. Benzerga |
|
| IS - Regularized failure models I - Integral nonlocal approaches Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | WeM04I01 Room: Maschinenhalle Chair: Milan Jirásek |
A non-local GTN based model for explicit crash simulations V. Davaze, S. Feld-Payet, B. Langrand, N. Vallino and J. Besson Abstract |
Nonlocal models for computing dynamic brittle fracture P. Jha and R. Lipton Abstract |
Overall structural equilibrium in Computational Methods Coupling Peridynamics with Classical Mechanics M. Zaccariotto, T. Ni, G. Ongaro, P. Seleson and U. Galvanetto Abstract |
| IS - Ductile fracture I Invited Session organized by Pierre-Olivier Bouchard, Jose Cesar de Sa and Ron Peerlings | WeM04I02 Room: Nîmes 1 Chair: Pierre-Olivier Bouchard |
KEYNOTE LECTURE
Effect of hardening on toughness: stress-dependent nucleation in the case of 6061 aluminum alloy T. Petit, J. Besson, C. Ritter, K. Colas, L. Helfen and T. F. Morgeneyer Abstract |
Damage and Failure of Thin Sheet Metal: New Biaxial Specimen Geometries S. Gerke, J. Tix and M. Brünig Abstract |
Experimental and Numerical Investigation of Ductile Fracture of Elements With Notches Under Elevated Temperature L. Derpenski and A. Seweryn Abstract |
The Effect of Nonproportional Loading Paths on Damage and Fracture Mechanisms: Experiments and Numerical Simulations M. Zistl, S. Gerke and M. Brünig Abstract |
| IS - Quasi-brittle cracking, coupled processes and hydraulic fractures I Invited Session organized by Gilles Pijaudier-Cabot and Ignacio Carol | WeM04I03 Room: Nîmes 2 Chair: Ignacio Carol |
Interaction of coplanar 3D cracks in brittle materials under compression L. Quaranta, L. Wijerathne and M. Hori Abstract |
Mixed Finite Element Modeling of Quasi-Brittle Cracks Under Cyclic Loading G.B. Barbat, M. Cervera and M. Chiumenti Abstract |
Fracture of the concrete meso-structure: computed tomography, mesh generation and phase-field modelling R. Kruse, P. Carrara and L. De Lorenzis Abstract |
Cracking behaviour of cementitious mortar accounting for its heterogeneous nature A. Mishra, P. Carrara, R. Kruse and L. De Lorenzis Abstract |
3D mesoscale modelling of cementitious materials at post-peak G. Mazzucco, G. Xotta, B, Pomaro, E. Garbin, V. Salomoni and C. Majorana Abstract |
| IS - Theory of fracture, crack propagation criteria and crack tracking algorithms I Invited Session organized by Anna Pandolfi and Michael Ortiz | WeM04I04 Room: Omaha Chair: Anna Pandolfi |
KEYNOTE LECTURE
Material Sink Approach to Fracture Modelling K. Volokh Abstract |
Computing Convergent Stress Intensity Factors Along the Front of a Three-Dimensional Crack on Unstructured Meshes B.E. Grossman-Ponemon, L.M. Keer and A.J. Lew Abstract |
Fracture and singularities of the mass density gradient field A Acharya Abstract |
Regularized explicit finite element formulation of shear localization with global tracking of embedded weak discontinuities T. Jin, H.M. Mourad and C.A. Bronkhorst Abstract |
| IS - Sandia Fracture Challenge (SFC) Special Session Invited Session organized by Brad Boyce and Krishanswamy Ravi-Chandar | WeM04I05 Room: Kasan Chair: Brad Boyce Co-Chair: Krishanswamy Ravi-Chandar |
The Sandia Fracture Challenges: Learning from Blind Benchmarks B.L. Boyce and S.L.B. Kramer Abstract |
Summary of the First and Second Global Sandia Fracture Challenges K. Ravi-Chandar Abstract |
The Third Sandia Fracture Challenge: A Deep Dive into the Experimental Results A. Jones, S. Kramer, J. Gearhart, B. Boyce, T. Ivanoff, A. Lentfer and B. Salzbrenner Abstract |
Team Q’s Approach to the Third Sandia Fracture Challenge K. Karlson, C. Alleman, J. Foulk, K. Manktelow, J. Ostien, M. Stender, A. Stershic and M. Veilleux Abstract |
Lessons learned from the first and third Sandia FractureChallenge S. Brinckmann Abstract |
The Third Sandia Fracture Challenge: deterministic and probabilistic modeling of ductile fracture of additively-manufactured material T. Tancogne-Dejean, M. Gorji, K. Pack and C. Roth Abstract |
An adaptive remeshing with cohesive zone approach to ductile failure: application to the Second Sandia Fracture Challenge V. Chiaruttini Abstract |
| Microstructural aspects of fracture I | WeM04O06 Room: Bath Chair: Stefanie Reese |
Configurational forces in crystal systems S.E. Birang.O and P. Steinmann Abstract |
A method for modeling intergranular fracture and grain boundary sliding S. Rezaei, J. R. Mianroodi and S. Reese Abstract |
Fracture mechanisms of dual-phase steels exhibiting a platelet-like microstructure K. Ismail, L. Brassart, A. Perlade, P. J. Jacques and T. Pardoen Abstract |
|
|
| IS - Regularized failure models II - Phase-field models – numerics Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | WeA06I01 Room: Maschinenhalle Chair: Nicolas Moës |
KEYNOTE LECTURE
On Penalization of Irreversibility in Variational Phase-Field Models of Brittle Fracture T. Gerasimov and L. De Lorenzis Abstract |
A discontinuous approach to fracture based on the phase-field and the virtual element method A. Hussein, B. Hudobivnik , F. Aldakheel and P. Wriggers Abstract |
A Hybridizable Discontinuous Galerkin phase-field model for brittle fracture with adaptive refinement A. MuixÃ, S. Fernández-Méndez and A. RodrÃguez-Ferran Abstract |
A Phase-Field Model for Crack Propagation in 3D using the Finite Cell Method L. Hug, M. Elhaddad, S. Kollmannsberger, Z. Yosibash and E. Rank Abstract |
A Phase-Field Model in Incompressible Solids - Numerical Application and Error Estimation. K. Mang, M. Walloth, T. Wick and W. Wollner Abstract |
| IS - Ductile fracture II Invited Session organized by Pierre-Olivier Bouchard, Jose Cesar de Sa and Ron Peerlings | WeA06I02 Room: Nîmes 1 Chair: Ron Peerlings |
A Regularized Model for Ductile Damage by Micromorphic Homogenization G. Hütter Abstract |
Analysis of the Stress-state-dependent Damage and Failure Behavior of Ductile Metals under Biaxial Loading Conditions M. Schmidt, M. Brünig and S. Gerke Abstract |
A Criterion for Void Coalescence in Anisotropic Ductile Materials Based on Concepts of Continuum Damage Mechanics J. Jackiewicz Abstract |
Comparison of ductile damage models for fracture prediction in sheet metal forming R. Amaral, A. Santos, S. Miranda and J. Cesar de Sa Abstract |
Properties of a non-local locking-free GTN model within the context of small-scale yielding Y. Chen, E. Lorentz and J. Besson Abstract |
A gradient-enhanced model for ductile damage and failure of steels based on an engineering approach A. Seupel and M. Kuna Abstract |
| IS - Quasi-brittle cracking, coupled processes and hydraulic fractures II Invited Session organized by Gilles Pijaudier-Cabot and Ignacio Carol | WeA06I03 Room: Nîmes 2 Chair: Ignacio Carol |
Phase-field modeling of shrinkage-induced cracking in cement mortar T. Cajuhi, P. Lura and L. De Lorenzis Abstract |
Chemo-mechanical modelling of swelling in a fractured porous medium A. Socié, F. Dubois, F. Perales and Y. Monerie Abstract |
Fracture analysis with zero-thickness interface elements and crack reorientation based on configurational forces L. Crusat, D. Garolera and I. Carol Abstract |
A coupled chemical-mechanical approach to model biogenic sulfide corrosion in concrete sewer pipes F.A.M. Rooyackers, E. Bosco, A.S.J. Suiker and F.H.L.R. Clemens Abstract |
Computational modelling of hygro-thermo-chemo-mechanical phenomena for prediction of salt crystallization-induced damage M. Koniorczyk Abstract |
| IS - Theory of fracture, crack propagation criteria and crack tracking algorithms II Invited Session organized by Anna Pandolfi and Michael Ortiz | WeA06I04 Room: Omaha Chair: Anna Pandolfi |
Crack tracking algorithms for 3D fracture propagation based on a viscous regularization A. Salvadori, P. Wawrzynek and F. Fantoni Abstract |
Influence of internal length scales on the evolution of micro-cracking in fiber-reinforced composites G. Lancioni and R. Alessi Abstract |
Micromechanical Modelling of Ductile Damage via a Cohesive-Volumetric Approach N. B. Nkoumbou Kaptchouang, Y. Monerie and P.-G. Vincent Abstract |
Application of a microstructured brittle damage model to laboratory tests on rocks F. Calidonna, M.L. De Bellis, G. Della Vecchia, M. Ortiz and A. Pandolfi Abstract |
Mesh-independent Crack Propagation under Mixed-Mode Loading using Remeshing and Dynamic Insertion of Cohesive Elements D. Uribe, D. Pino Muñoz, M. Delbo and P.-O. Bouchard Abstract |
Applying the generalized Orowan criterion, to model cleavage fracture of High-Strength Low-Alloy steels (HSLA) J. Langenberg, D. Lenz, M. Könemann and S. Münstermann Abstract |
| IS - Fracture benchmark Invited Session organized by Martin Poncelet and Julien Réthoré | WeA06I05 Room: Kasan Chair: Martin Poncelet Co-Chair: Julien Réthoré |
Mixed mode fatigue crack propagation with a cohesive XFEM model R. Dekker, F.P. van der Meer, J. Maljaars and L.J. Sluys Abstract |
Phase field modeling of crack initiation and propagation under complex loading T.T. Nguyen, J. Yvonnet and D. Waldmann Abstract |
Mixed mode crack propagation in concrete using the Thick Level Set approach to fracture B. Le, A. Salzman, N. Moës and N. Chevaugeon Abstract |
Sandia Fracture Models for Mixed-Mode Brittle Fracture A. Stershic, J. Emery, J. Ostien, M. Stender and B. Talamini Abstract |
Validation of XFEM Hydraulic Fracturing Model with Experimental Results from PMMA Mixed Mode Fracturing. B. Gee, M. Parchei-Esfahani and R. Gracie Abstract |
Mixed mode crack propagation in PMMA using the Thick Level Set approach to fracture B. Lé, N. Chevaugeon, A. Salzman and N. Moës Abstract |
Phase-Field Modelling of Mixed Mode Crack Propagation in PMMA D. Juhre and Z. Liu Abstract |
| Microstructural aspects of fracture II | WeA06O06 Room: Bath Chair: Elio Sacco |
Multiphase-field modelling of brittle and ductile crack propagation in microstructures C. Herrmann, M. Späth, F. Schwab, E. Schoof, D. Schneider and B. Nestler Abstract |
Phase-Field Modelling of Thermoelastic Cracking in Polycrystalline Materials D. Juhre and Z. Liu Abstract |
Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under dynamic loading D. Schob, I. Sagradov, R. Roszak, H. Sparr, R. Franke, M. Ziegenhorn, A. Kupsch, F. Leonard, B.R. Müller and G. Bruno Abstract |
|
|
| IS - Regularized failure models III - Phase-field models – shells and anisotropy Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | WeE08I01 Room: Maschinenhalle Chair: Blaise Bourdin |
Layered phase field approach to shell M. Brunetti, F. Freddi and E. Sacco Abstract |
Phase-field simulation of brittle fracture in complex shell structures using LR-NURBS adaptive mesh refinement D. Proserpio, J. Kiendl, M. Ambati, L. De Lorenzis, K. A. Johannessen and T. Kvamsdal Abstract |
Crack kinking in a variational phase-field model of brittle fracture with strongly anisotropic surface energy B. Li and C. Maurini Abstract |
Phase-field modeling of fracture in brittle materials with anisotropic fracture energy S. Nagaraja, M. Ambati and L. De Lorenzis Abstract |
Chemo-mechanical degradation of monumental stones F. Freddi Abstract |
| IS - Ductile fracture III Invited Session organized by Pierre-Olivier Bouchard, Jose Cesar de Sa and Ron Peerlings | WeE08I02 Room: Nîmes 1 Chair: Jose Cesar de Sa |
KEYNOTE LECTURE
Micromechanical simulation of brittle and ductile fracture processes in metals to predict their fracture toughness M. Kuna, G. Hütter and N.A. Giang Abstract |
3D analysis of void coalescence mechanisms in nodular graphite cast iron based on finite element computation driven by digital volume correlation and in-situ laminography observations P.-O. Bouchard, V. Trejo Navas, M. Bernacki, A. Buljac, T. F. Morgeneyer and F. Hild Abstract |
Effects of Lode-dependent matrix behaviour on the macroscopic yielding and ductile failure in isotropic porous plastic solids L.E.B. Dæhli, D. Morin, T. Børvik, A. Benallal and O.S. Hopperstad Abstract |
Predicting ductile fracture in ferrous and nonferrous metals during upset forging using an ellipsoidal void model K. Komori Abstract |
| IS - Quasi-brittle cracking, coupled processes and hydraulic fractures III Invited Session organized by Gilles Pijaudier-Cabot and Ignacio Carol | WeE08I03 Room: Nîmes 2 Chair: Ignacio Carol |
Hydraulic fracture propagation interacting with multiphase flow in porous media J. Kim and E. S. Um Abstract |
Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth. H. Zia and B. Lecampion Abstract |
Hydraulic fracturing modeling using finite elements with high aspect ratio P. Cleto, O. Manzoli, M. Sanchez, L. Guimaraes and M. Maedo Abstract |
Hydro-mechanical phase-field modelling of hydraulic fractures for carbon capture and storage I. Kolo, C.V. Verhoosel and K. de Borst Abstract |
Hydraulic Fracture Simulation - Coupling Strategies and Pressure Pulsing R. Gracie, M. Parchei-Esfahani and M. Komijani Abstract |
| IS - Theory of fracture, crack propagation criteria and crack tracking algorithms III Invited Session organized by Anna Pandolfi and Michael Ortiz | WeE08I04 Room: Omaha Chair: Anna Pandolfi |
Computing the generalized stress intensity factors of 3D singularities. Application to the coupled criterion for fracture of brittle materials. D. Leguillon, A. Doitrand and E. Martin Abstract |
Energy based cleavage criterion (Gp approach) applied to the problem of shallow crack effect C. Jacquemoud, S. Jules and S. Geniaut Abstract |
Peridynamic analysis of dynamic fracture processes in brittle solids S. Butt and G. Meschke Abstract |
Validation of an energy based peridynamic state-based failure criterion C. Willberg, M. Rädel and W. Exner Abstract |
Data reusing techniques to accelerate a crack propagation boundary element method code A. Dansou, S. Mouhoubi and C. Chazallon Abstract |
Comparison of different constitutive models for concrete in simple numerical tests M. Szczecina and A. Winnicki Abstract |
| IS - Fracture of biological tissues: observations, mechanisms and concepts Invited Session organized by T.Christian Gasser and Hanna Isaksson | WeE08I05 Room: Kasan Chair: T.Christian Gasser Co-Chair: Hanna Isaksson |
Modeling some inelastic properties of collagen-rich biological tissues T.C. Gasser and C. Miller Abstract |
A hybrid discrete-continuum model to explain the remarkable defect tolerance of soft collagenous tissues K. Bircher, M. Zündel, M. Pensalfini, E. Mazza and A. E. Ehret Abstract |
Experimental and Numerical Analyses of Trabecular Bone Fracture A. Braesch-Andersen, J. Carlsson, C. Öhman Mägi, C. Persson, S.J. Ferguson and P. Isaksson Abstract |
Simulating fracture of real wood microstructures using a phase field finite element method J. Carlsson and P. Isaksson Abstract |
Crack propagation in cortical bone modelled with the extended finite element method. A. Gustafsson, M. Wallin and H. Isaksson Abstract |
Experimental characterization of aneurysmal aortic tissue rupture under bulge inflation loading in a confocal microscope C. Cavinato, L. Orgéas, S. Rolland du Roscoat, S. Campisi and P. Badel Abstract |
| Dialogue between modeling and experiments | WeE08O06 Room: Bath Chair: Martin Bäker |
Hail Impact Model for Hybrid Laminar Flow Control (HLFC) Structure F. Martin de la Escalera and Y. Essa Abstract |
Fracture Simulation for Thermal Barrier Coatings in Rocket Engine M. Bäker, T. Fiedler and J. Rösler Abstract |
The mechanical response and failure of Al-TiB2 composites produced by Spark Plasma Sintering – A computational study validated by experiments E Priel, B Mittelman, N Trabelsi, N.U Navi, S Haroush, N Bitton, O Rahamim, S Hayun and N Frage Abstract |
Fem and experimental analysis of columns with different strengths along the height F. Prado, P. Azevedo and F. Stucchi Abstract |
|
| Thursday, June 13 |
08:45 - 09:30 Plenary II - Prof. Xavier Oliver | ThM01P Room: Maschinenhalle Chair: Milan Jirásek |
On strain injection techniques for propagating crack modeling in quasi-brittle materials X. Oliver |
09:30 - 10:15 Plenary III - Prof. Peter Wriggers | ThM02P Room: Maschinenhalle Chair: Nicolas Moës |
Virtual Element Methods for Fracture Mechanics P. Wriggers |
|
|
| IS - Regularized failure models IV - Phase-field approach as a tool Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | ThM04I01 Room: Maschinenhalle Chair: Corrado Maurini |
The Poker-Chip Experiments of Gent and Lindley (1959) Explained A. Kumar and O. Lopez-Pamies Abstract |
Modelling of Brittle Fracture of Concrete Material by the Phase-field Approach and Representative Crack Elements (RCE) D. Supriatna, J. Storm and M. Kaliske Abstract |
Simulation of Hertzian indentation fracture using a phase field approach M. Strobl and T. Seelig Abstract |
A homogenization-based phase field approach to fracture with special attention to tension-compression decomposition Y. Shen, C. Cheng and Y. Liu Abstract |
Investigating new regimes in interaction of fracture and phase transformation: A phase field model H. Jafarzadeh, G. H. Farrahi, M. Javanbakht and V. I. Levitas Abstract |
Phase-Field Modeling of Fracture in Strain Gradient Elasticity R. Makvandi and D. Juhre Abstract |
| IS - Ductile fracture IV Invited Session organized by Pierre-Olivier Bouchard, Jose Cesar de Sa and Pierre-Olivier Bouchard | ThM04I02 Room: Nîmes 1 Chair: Ron Peerlings Co-Chair: Pierre-Olivier Bouchard |
Phase-field modeling of thermomechanical porous-ductile fracture. J. Schulte, M. Dittmann, F. Aldakheel and C. Hesch Abstract |
Ductile Fracture Representation using the Phase-Field Model in SIERRA A. Stershic, J. Ostien and B. Talamini Abstract |
Ductile fracture modelling using the Thick Level Set approach B. Lé and N. Moës Abstract |
Phase-field modelling of void growth using micromechanical damage law E. Azinpour, J. Cesar de Sa and A. Santos Abstract |
A Novel Formulation of Ductile Fracture by the Phase-field Method B. Yin and M. Kaliske Abstract |
A phase-field method for computational modeling of ductile fracturing with interfacial damage in heterogeneous metallic materials P. LI, J. Yvonnet and C. Combescure Abstract |
| IS - Discrete models for material failure Invited Session organized by Ferenc Kun and Falk Wittel | ThM04I03 Room: Nîmes 2 Chair: Ferenc Kun Co-Chair: Falk Wittel |
A Discrete Element approach for Modeling the Thermal-induced Damage in continuous media G. Alhajj Hassan, W. Leclerc, C. Pélegris, M. Guessasma and E. Bellenger Abstract |
Meso scale modelling of failure in bio-cemented sand Z. Rizvi, M. Nikolic and F. Wuttke Abstract |
Discrete element modelling of the effect of disorder on the spatial structure of damage in compressive failure G. Pál and F. Kun Abstract |
Consolidation of Polyhedral Packings due to Grain Fracture F. Wittel and P. Iliev Abstract |
Modelling of ductile fracture in Chip Formation Process using the Stabilized Optimal Transportation Meshfree Method D. Huang, C. Weißenfels and P. Wriggers Abstract |
Discrete element modelling of the shrinkage-induced fragmentation of a thin brittle layer Z. Halász and F. Kun Abstract |
A Note on Shattering Fragmentation and Lateral-Confinement Effect on Impact Fragmentation of Slender Nanoprojectiles S. Mastilovic Abstract |
| IS - Dynamic fracture, fragmentation and impact I Invited Session organized by Josko Ozbolt | ThM04I04 Room: Omaha Chair: Serena Gambarelli |
Dynamic fracture of brittle shells in an adaptive phase field framework based on LR NURBS. K. Paul, C. Zimmermann, K.K. Mandadapu, T.J.R. Hughes, C.M. Landis and R.A. Sauer Abstract |
Phase field fracture model for viscoplastic material in large deformations B. W. Kabore, P. Loew and B. Peters Abstract |
Numerical Analysis of Abnormal Fracture Occurrence in Drop Weight Tearing Test for X70 Pipeline Steel Using Ductile-Brittle Combined Fracture Model M.-W. Lee, J.-S. Kim, Y.-J. Kim, Y.-Y. Jang, N.-S. Huh and K.-S. Kim Abstract |
Dynamic Ductile Fracture with a Directional Phase-Field Split C. Steinke and M. Kaliske Abstract |
| IS - Cyclic damage processes in high-performance concrete in experimental-virtual-lab (DFG Priority Program 2020) I Invited Session organized by Stefan Loehnert, Michael Kaliske and Steffen Anders | ThM04I05 Room: Kasan Chair: Michael Kaliske Co-Chair: Stefan Loehnert |
Phase-field modeling of steel fiber reinforced high performance concrete considering failure M. Pise, D. Brands, G. Gebuhr, M. Sarhil, J. Schröder and S. Anders Abstract |
Method of Representative Crack Elements for Phase-field Fracture with Finite Deformations and Dissipative Material Behaviour. J. Storm, D. Supriatna and M. Kaliske Abstract |
Bond behaviour of steel microfibres embedded in UHPC. S. Höper, U. Kowalsky and D. Dinkler Abstract |
Computational modeling of damage evolution in concrete due to cyclic loading V. Gudzulic, J. Timothy, N. Schaefer, R. Breitenbuecher and G. Meschke Abstract |
A multiscale approach to localized damage indicators of a short-fibre reinforced high performance concrete. U. Weiß, L. Reischmann, P. Lauff, O. Fischer, M. Raith, C. Große, M. Rutzen, D. Volkmer and M.A. Peter Abstract |
Structural behavior and internal crack mechanisms of fiber reinforced concrete under cyclic and static loads combined with CT Scan Images Processing M. A. Vicente, D. Gonzalez, J. Minguez and A. Mena Abstract |
| IS - Statistical aspects of fracture Invited Session organized by Laurent Ponson and Daniel Bonamy | ThM04I06 Room: Bath Chair: Laurent Ponson Co-Chair: Daniel Bonamy |
A Fractional Calculus Framework for Modeling and Prediction of Failure in Anomalous Materials E. A B de Moraes, J. L. Suzuki and M. Zayernouri Abstract |
Influence of material heterogeneities on crack propagation statistics using a Fiber Bundle Model F. Villette, J. Baroth, F. Dufour, J.F. Bloch and S. Rolland du Roscoat Abstract |
Statistics of breaking bursts in a fiber bundle model of fat tailed disorder V. Kádár and F. Kun Abstract |
Interplay between process zone and material heterogeneities for dynamic cracks T. Roch and J.F. Molinari Abstract |
|
|
| IS - Regularized failure models V - Heterogeneous materials Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | ThA06I01 Room: Maschinenhalle Chair: Oscar Lopez-Pamies |
KEYNOTE LECTURE
Issues when combining fracture evolution and Gamma-convergence: dangers in phase-field dynamics C. Larsen Abstract |
Toughening in heterogeneous materials B. Bourdin, S. Brach and K. Bhattacharya Abstract |
Phase field modeling of interfacial crack propagation in quasi-brittle heterogeneous materials T.T. Nguyen, J. Yvonnet, D. Waldmann and Q.C. He Abstract |
Phase-field modelling and simulation of crack branching and deflection in heterogeneous media. A. C. Hansen-Dörr, F. G. Dammaß and M. Kästner Abstract |
A nonlocal interphase approach for modelling interface failure in complex crystalline microstructures L. Sharma, R.H.J. Peerlings, M.G.D. Geers, F. Roters and P. Shanthraj Abstract |
| IS - Multi-scale analysis I Invited Session organized by Marc Geers, Xavier Oliver, Stefan Loehnert and Alfredo Huespe | ThA06I02 Room: Nîmes 1 Chair: Stefan Loehnert Co-Chair: Xavier Oliver |
KEYNOTE LECTURE
A two-scale framework for modeling strain localization in solids E. Svenning, F. Larsson and M. Fagerström Abstract |
Non-Linear Multiscale Homogenization with the Virtual Element Method F. Lopez Rivarola, G. Etse, M. Benedetto and N. Labanda Abstract |
Multiscale Ductile Damage Modelling of Heterogeneous Material Using Second-order Homogenization J. Soric, T. Lesicar and Z. Tonkovic Abstract |
Macroscopic model-free analysis of quasi-brittle failure in heterogeneous materials E. Eid, R. Seghir and J. Réthoré Abstract |
Homogenization Techniques for Materials with Discrete Microstructures---a Critical Comparison K. Mikeš, O. Rokoš, F. Bormann and R.H.J. Peerlings Abstract |
| IS - Fracture and damage of composites and laminates I - Delamination issues Invited Session organized by Stephen Hallett, Joris Remmers and Olivier Allix | ThA06I03 Room: Nîmes 2 Chair: Joris Remmers |
A Cohesive Model for Mixed-Mode Delamination with Transition to Fiber Bridging F. Confalonieri, A. Cornaggia and U. Perego Abstract |
Mode separation in a mixed-mode I/II problem by the J-integral and higher-order theories B. Kiss and A. Szekrényes Abstract |
Evaluation of the growth driving direction and mode-decomposed energy release rates in arbitrarily shaped delamination fronts L. Carreras, E. Lindgaard, B. Bak, J. Renart and A. Turon Abstract |
Modeling and Simulation of Delamination in Composite Laminates using Hybrid Brick Elements. A. Lala Bahadur and R. Gangadharan Abstract |
On the use LEFM, NLFM and CZM in the analysis of a DCB test L. Å kec, G. Alfano and G. Jelenić Abstract |
On the relations between fracture mechanics and damage mechanics of rate-dependent interfaces O. Allix and M. Jirasek Abstract |
| IS - Dynamic fracture, fragmentation and impact II Invited Session organized by Josko Ozbolt | ThA06I04 Room: Omaha Chair: Serena Gambarelli |
Dynamic simulation of masonry materials at different loading velocities using an updated damage delay algorithm of regularization: theory and practical applications T. Li Piani, J. Weerheijm and L.J. Sluys Abstract |
Numerical and Experimental Study of Concrete Structures under Extreme Conditions: Impact and Fire J. Ožbolt, D. Ruta and B. Irhan Abstract |
Modelling of spallation in ductile metals using an explicit enriched finite volume scheme combined to a cohesive zone model M. Gorecki, G. Peillex, L. Pillon and N. Moës Abstract |
Dyamic crack propagation : numerical estimation of inertial effect J. Girardot and J.-B. Kopp Abstract |
An enhanced failure approach for fracture simulation of laminated glass under impact loading C. Alter, S. Kolling and J. Schneider Abstract |
| IS - Cyclic damage processes in high-performance concrete in experimental-virtual-lab (DFG Priority Program 2020) II Invited Session organized by Stefan Loehnert, Michael Kaliske and Steffen Anders | ThA06I05 Room: Kasan Chair: Stefan Loehnert Co-Chair: Michael Kaliske |
Combined numerical experimental methodology for characterizing the concrete fatigue behavior considering the loading sequence effect B. Abedulgader, J. Hegger and R. Chudoba Abstract |
Water-induced failure mechanics for concrete: Micro-mechanical model, experimental observation and phase-field coupling F. Aldakheel and P. Wriggers Abstract |
Investigation of Failure Mechanisms in High Strength Concrete using 3D-XFEM R. Patel and S. Löhnert Abstract |
| IS - Enriched finite-element formulations for fracture I Invited Session organized by Jorge Alfaiate and Bert Sluys | ThA06I06 Room: Bath Chair: Jorge Alfaiate |
Phase-Field Regularized Cohesive Zone Model: Recent Developments T.K. Mandal, V. P. Nguyen and J.-Y. Wu Abstract |
The Interfacial Thick Level Set method and its applications to Fatigue L.O. Voormeeren, F.P. van der Meer, J. Maljaars and L.J. Sluys Abstract |
A cohesive XFEM model for simulating fatigue crack growth under in- phase and out-of-phase mixed mode loading and overloading R. Dekker, F.P. van der Meer, J. Maljaars and L.J. Sluys Abstract |
Combination of XFEM and CZM for the numerical simulation of ductile fracture K. Nikolakopoulos, J. P. Crété and P. Longère Abstract |
A mixed XFEM formulation for the simulation of ductile fractures S. Loehnert Abstract |
Mesoscopic Modelling of Strain Hardening Fiber Reinforced Cement Based Composites (SHCC) U. Häussler-Combe and A. Shehni Abstract |
|
|
| IS - Regularized failure models VI - Thick level set approach Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | ThE08I01 Room: Maschinenhalle Chair: Milan Jirásek |
KEYNOTE LECTURE
Only thickness is essential in the Thick Level Set approach N. Valoroso and C. Stolz Abstract |
A cohesive zone model embedded in a thin softening layer: the CZM-TLS model N. Moës, B. Le and G. Legrain Abstract |
Simulation of cusp formation in a polymer matrix loaded in shear using the Thick Level Set method with plasticity. L. A. T. Mororó and F. P. van der Meer Abstract |
Development of a viscoelastic damage model within the Thick Level Set framework B. Shiferaw, O. Chupin, J.-M. Piau, B. Lé and N. Moës Abstract |
Micromechanics-based non-local damage theory: Application to the prediction of localization and precursors to failure E. Berthier, V. Démery, V. Dansereau, J. Weiss and L. Ponson Abstract |
| IS - Multi-scale analysis II Invited Session organized by Marc Geers, Xavier Oliver, Stefan Loehnert and Alfredo Huespe | ThE08I02 Room: Nîmes 1 Chair: Xavier Oliver Co-Chair: Stefan Loehnert |
KEYNOTE LECTURE
Multiscale formulations for in-plane and out-of-plane analysis of masonry elements D. Addessi, P. Di Re and E. Sacco Abstract |
Multiscale assesment of microstructurally-sensitive fatigue crack nucleation and growth and their mechanistic drivers F. Dunne, D. Wilson, Z. Zheng and B. Chen Abstract |
Scale transition methodologies for effective cracks in composite materials S Turteltaub and R Suarez Millan Abstract |
Numerical Analysis of the Influence of Surface Roughness on Shear Strength of Cracked Concrete M. Pundir and G. Anciaux Abstract |
| IS - Fracture and damage of composites and laminates II - Manufacturing and multiphysic issues Invited Session organized by Stephen Hallett, Joris Remmers and Olivier Allix | ThE08I03 Room: Nîmes 2 Chair: Olivier Allix |
Numerical and experimental analysis of the thermally induced damage in remote laser cut carbon fiber reinforced polymers B. Schmidt, M. Rose, M. Zimmermann and M. Kästner Abstract |
A gradient enhanced continuum approach towards shear cutting of carbon fiber reinforced plastics L. Poggenpohl, T. Brepols and S. Reese Abstract |
Progressive Damage Assessment of CFRP Tapered Scarf Repaired Panel under Uniaxial Compressive Loading: Experimentally and Numerically M. Seshadri, R. Gangadharan and M. Ramji Abstract |
Characterization of the transverse fracture properties of pultruded GFRP materials in tension L. Almeida-Fernandes, N. Silvestre and J. Ramôa Correia Abstract |
Experimental/numerical investigation of hygrothermal aging in fiber-reinforced composites I.B.C.M. Rocha, F.P. van der Meer, S. Raijmaekers, F. Lahuerta, R.P.L. Nijssen, L.P. Mikkelsen and L.J. Sluys Abstract |
A cohesive phase-field model for intra-laminar damage in fabric composite laminates U. Pillai, S. Triantafyllou, I. Ashcroft, Y. Essa and F. Martin de la Escalera Abstract |
| IS - Quasi-brittle cracking, coupled processes and hydraulic fractures IV Invited Session organized by Gilles Pijaudier-Cabot and Ignacio Carol | ThE08I04 Room: Omaha Chair: Vladislav Mantic |
A stabilized mixed formulation for phase-field modeling of fracture in porous media C. Gavagnin, L. Sanavia and L. De Lorenzis Abstract |
Poroelastic effects influence range for radial hydraulic fracturing model A. Baikin Abstract |
A fully coupled fracture model for the accurate analysis of the leak-off phenomenon in hydraulic stimulation J.J.C. Remmers, V. Valliappan, A. Barnhoorn and D.M.J. Smeulders Abstract |
An Energetic Formulation of a General Interface Model R. Vodicka and V. Mantic Abstract |
A coupled stress and energy criterion to assess the strength of pull-pull bonded joints G. Risso, P. Cornetti and W. Becker Abstract |
| IS - Enriched finite-element formulations for fracture II Invited Session organized by Jorge Alfaiate and Bert Sluys | ThE08I05 Room: Kasan Chair: Bert Sluys |
Non-Intrusive Coupling of Abaqus and a 3-D Scale-Bridging Generalized Finite Element Method H. Li, P. O‘Hara, T. Fillmore and A. Duarte Abstract |
Thermomechanical failure of 3D CGI microstructures for engine applications M.G.D. Geers, A. Mohammadpour and V. Kouznetsova Abstract |
3D Dynamic Crack Simulation with Extended Finite Element Method. T. Lyi, S. Löhnert and P. Wriggers Abstract |
Influence of shape on stability and performance of 2-dimensional finite elements with embedded cracks J. Planas, B. Sanz and J.M. Sancho Abstract |
From anisotropic damage to multiple cracks by coupling a microplane model and a strong discontinuity formulation in the Embedded Finite Element Method S. Kakarla, G. Rastiello, B. Richard and C. Giry Abstract |
Study of joint elements with application to the simulation of push-out and torsion tests of steel bars embedded in concrete specimens B. Sanz, J. Planas and J.M. Sancho Abstract |
| Fatigue I | ThE08O06 Room: Bath Chair: Marreddy Ambati |
Efficient phase-field modelling of fatigue crack propagation M. Seiler, T. Linse, P. Hantschke and M. Kästner Abstract |
Modeling of fatigue crack growth phenomena using the variational phase-field approach P. Carrara, M. Ambati and L. De Lorenzis Abstract |
A phase-field approach to high cycle fatigue simulation M. Ambati, P. Carrara and L. De Lorenzis Abstract |
Phase-field model for high cycle fatigue life prediction of brittle materials K. SeleÅ¡, F. Aldakheel, N. Gubeljak, Z. Tonković and J. Sorić Abstract |
Simulation of fatigue crack growth in CT-specimens using an extended phase field formulation for brittle fracture C. Schreiber, C. Kuhn and R. Müller Abstract |
|
| Friday, June 14 |
08:45 - 09:30 Plenary IV - Stephen Hallett | FrM01P Room: Maschinenhalle Chair: Olivier Allix |
Length-scale and other challenges in modelling composites structural failure S. R. Hallett |
09:30 - 10:15 Plenary V - Prof. Stefanie Reese | FrM02P Room: Maschinenhalle Chair: Laura De Lorenzis |
Atomistically motivated interface modeling to account for coupled plasticity and damage S. Reese |
|
|
|
| IS - Regularized failure models VII - Gradient and micromorphic approaches Invited Session organized by Milan Jirásek, Nicolas Moës and Corrado Maurini | FrM05I01 Room: Maschinenhalle Chair: Nicolas Moës |
A gradient--enhanced damage model based on smoothed displacements with vanishing length scale J. Amani, R. Geelen, B. Vandoren, J.E. Dolbow, A. Simone and A. RodrÃguez-Ferran Abstract |
Non intrusive implementation of a gradient formulation based on the nonlocal Eikonal approach F. Marconi, E. Baranger and R. Desmorat Abstract |
A gradient-extended damage-plasticity model for large deformations with combined nonlinear hardening T. Brepols, S. Wulfinghoff and S. Reese Abstract |
Hyper-reduction of gradient plasticity M. Horák, S. Forest and D. Ryckelynck Abstract |
Microplane Model with Relaxed Kinematic Constraint in the Framework of Micro Polar Cosserat Continuum S. Gambarelli and J. Ožbolt Abstract |
On regularized models leading to full localization at incomplete damage. M. Jirásek and M. Horák Abstract |
| IS - Multi-scale analysis III Invited Session organized by Marc Geers, Xavier Oliver, Stefan Loehnert and Alfredo Huespe | FrM05I02 Room: Nîmes 1 Chair: Stefan Loehnert |
Multi-scale Failure Analysis of Ultra-thin Composite Coilable Shell Structures A. Hasanyan and S. Pellegrino Abstract |
An adaptive hyper-reduced modeling framework for nonlinear failure analysis I.B.C.M. Rocha, F.P. van der Meer and L.J. Sluys Abstract |
An adaptive global-local approach for phase-field modeling of anisotropic brittle fracture N. Noii, F. Aldakheel, T. Wick and P. Wriggers Abstract |
A Multiscale Projection Method for Analysis of Fiber Kinking in Fiber Reinforced Polymers S. Hosseini, S. Löhnert, P. Wriggers and E. Baranger Abstract |
Damage simulation of linear thermo-chemo-elastic fibre reinforced composites using mean-field homogenization methods. P. Lenz and R. Mahnken Abstract |
| IS - Fracture and damage of composites and laminates III - Damage and Failure of composites Invited Session organized by Stephen Hallett, Joris Remmers and Olivier Allix | FrM05I03 Room: Nîmes 2 Chair: Stephen Hallett |
A 3D Continuum Damage Model for Tough Fibre Reinforced Polymer Composites Using Cuntze’s Failure Mode Concept O. Völkerink, E. Petersen and C. Hühne Abstract |
Microstructure based translaminar fracture modelling of plain weave composite laminates using lattice springs network model. R.P.S. Parihar and A. Banerjee Abstract |
Strength prediction of notched thin-ply laminates A. Arteiro, J. Reinoso and P.P. Camanho Abstract |
Micro-scale numerical modelling of FRCM tensile behaviour F. Nerilli, S. Marfia and E. Sacco Abstract |
Multi-axial Failure Envelopes for Laminated Composites B. El Said and S. R. Hallett Abstract |
Experimental and numerical studies on the damage behavior of open hole CFRP composite specimen subjected to compression K Dongri, N R Kolanu, K Varaprasad and G Raju Abstract |
| IS - Dynamic fracture, fragmentation and impact III Invited Session organized by Josko Ozbolt | FrM05I04 Room: Omaha Chair: Dominique Leguillon |
Numerical modeling of crack front segmentation under mode I+III loading A. Doitrand and D. Leguillon Abstract |
Energetic analysis of unsteady dynamic crack growth: experimental study on elastomer membranes T. Corre, M. Coret, E. Verron and B. Leblé Abstract |
Higher-order Cohesive Segment Method for Dynamic Delamination Analysis in an Explicit Solver A.K.W. Hii, L.F. Kawashita and A. Pirrera Abstract |
Improved XFEM: algorithms, software and applications R. Tian and L. Wen Abstract |
| Fatigue II | FrM05O05 Room: Bath Chair: Pietro Carrara |
Fatigue crack propagation modeling using a local approach to fracture O. Voreux, S. Kruch, S. Feld-Payet, P. Kanouté and N. Rakotomalala Abstract |
Prediction of fatigue crack propagation in laser shock peening induced residual stress fields with experimental validation S. Keller, M. Horstmann, N. Kashaev and B. Klusemann Abstract |
Experimental investigation and numerical simulation of cyclic deformation behavior of SLM-manufactured Aluminum alloys. S. Klinge, M. Awd, T. Wiegold and F. Walther Abstract |
Fatigue life and fracture of metal alloys at elevated temperature J. Szusta and A. Seweryn Abstract |
|
