Monday, June 30th 11:30 - 12:30
Recent Developments in Computational Methods for Structural Optimization I
Minisymposium organized by H Alicia Kim, Gengdong Cheng, David Kennedy, Michal Kocvara, Tae Hee Lee, Kurt Maute and Mathias Stolpe
|
MS069
Room: CAS0.1
|
Multi-Material Topology Optimization of Geometrically Nonlinear Multi-Layered Composite Shell Structures
Erik Lund, Leon Johansen, Christian Gram Hvejsel, Esben Lindgaard Olesen
|
Monday, June 30th 14:00 - 16:00
Multiscale Modeling and Uncertainty Quantification of Heterogeneous Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Manolis Papadrakakis, George Stefanou, X. Frank Xu and Nicholas Zabaras
|
MS150
Room: CAS3.10
|
Generalized Plane Approaches to the Homogenization of Heterogeneous Bi-Dimensional Solids
Nicola Cavalagli, Federico Cluni, Vittorio Gusella
|
Monday, June 30th 14:00 - 16:00
Computational Modelling in Bone Mechanobiology II
Minisymposium organized by Jose Manuel Garcia-Aznar, Danny Kelly, Manuel Doblare and Patrick Prendergast
|
MS180
Room: CIN2.1
|
A 3D Bioactive Contact Element for Finite Element Bone Remodelling Simulation
Andre Lutz, Udo Nackenhorst
|
Monday, June 30th 16:30 - 18:30
Uncertainty Modeling and Quantification in Computational Mechanics III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Effect of Base Flow Uncertainty on Couette Flow Stability
Didier Lucor, Jordan Ko, Pierre Sagaut
|
Monday, June 30th 16:30 - 18:30
Role of Heterogeneities and Uncertainties in Inelastic Response of Materials
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Adnan Imbrahimbegovic and Hermann Matthies
|
MS111
Room: CAS3.6
|
Cosserat Homogenization of Elastic Periodic Blocky Masonry
Luigi Gambarotta, Andrea Bacigalupo
Fracture Energy and Homogenization of Masonry Structures
Nicola Cavalagli, Federico Cluni, Vittorio Gusella
|
Monday, June 30th 16:30 - 18:30
Numerical Dynamical Systems Analysis of Nonlinear Climate Models I
Minisymposium organized by Fred Wubs, Kurt Lust and Henk Dijkstra
|
MS184
Room: CAS1.4
|
A Time Simulation Based Approach to Numerical Bifurcation Analysis of Fluid Problems
Kurt Lust
|
Monday, June 30th 16:30 - 18:30
Fluid Dynamics of Compressible Flows of Substances Governed by Complex Thermodynamic Models II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Piero Colonna, Stefano Rebay, Alberto Guardone and John Harinck
|
MS049
Room: CAS3.3
|
Transonic Viscous Inviscid Interactions of Dense Gases in Narrow Channels
Alfred Kluwick, Georg Meyer
Modeling of Spray Behavior of a Diesel Fuel Surrogate
Michael Boot, Dennis van Erp, Peter Frijters, Carlo Luijten, Rik Baert
|
Monday, June 30th 16:30 - 18:30
Recent Developments in Computational Methods for Structural Optimization III
Minisymposium organized by H Alicia Kim, Gengdong Cheng, David Kennedy, Michal Kocvara, Tae Hee Lee, Kurt Maute and Mathias Stolpe
|
MS069
Room: CAS0.1
|
Towards Local Design Criteria in Discrete Material Optimization
Christian Gram Hvejsel, Erik Lund
|
Monday, June 30th 16:30 - 18:30
Computational Methods in Nonlinear Dynamics III
Minisymposium organized by Stefano Lenci and Marian Wiercigroch
|
MS038
Room: CAS2.5
|
Nonlinear Dynamic Response of a Simply-Supported Laminated Composite Plate subjected to Explosive Pressure Pulses
Zafer Kazanci, Zahit Mecitoglu
|
Tuesday, July 1st 10:30 - 12:30
Meshfree Multiscale Methods Mini-Symposium I
Minisymposium organized by Michael Griebel, Antonio Huerta, Wing Kam Liu and Marc Alexander Schweitzer
|
MS089
Room: CAS3.4
|
A Time Split Strategy for Coupling Mechanical Stress Fields with Grain Scale Phenomena using MPM
Timothy J. Bartel, Mark Lusk, Elizabeth A. Holm
|
Tuesday, July 1st 10:30 - 12:30
Computational Procedures and Models for Quasi-brittle Materials I
Minisymposium organized by Anthony Jefferson and Günter Hofstetter
|
MS114
Room: CAS3.10
|
A Two-Scale Strong Coupling Framework for Softening Materials
Oriol Lloberas Valls, Angelo Simone, Bert Sluys
Modelling of Rate Effects at Multiple Scales
Ronnie Pedersen, Angelo Simone, Bert Sluys
|
Tuesday, July 1st 10:30 - 12:30
Numerical Modeling in Reinforced Concrete and Its Validation I
Minisymposium organized by Rena C. Yu, Giulio Ventura, Gonzalo Ruiz and Jacinto R. Carmona
|
MS200
Room: CAS3.6
|
An Efficient Computational Model for Fibre Reinforced Concrete Incorporating Information From Multiple Scales
Frank Radtke, Angelo Simone, L.J. Sluys
|
Tuesday, July 1st 10:30 - 12:30
Soft Computing Methods II
Minisymposium organized by Tadeusz Burczynski, Jamshid Ghaboussi and Zenon Waszczyszyn
|
MS094
Room: CAS2.1
|
The Identification of Stochastic Parameters in Laminate Structures by means of Evolutionary Computations
Witold Beluch, Tadeusz Burczyński, Piotr Orantek
|
Tuesday, July 1st 10:30 - 12:30
Uncertainty Quantification Methods for CFD and FSI II
Minisymposium organized by Hester Bijl and Chris Lacor
|
MS090
Room: CAS1.3
|
Uncertainty Quantification for Conservation Laws
Gael Poette, Bruno Després, Didier Lucor
Airfoil Performance at Stochastic Transonic Flow Regimes
Jean-Camille Chassaing, Didier Lucor
|
Tuesday, July 1st 10:30 - 12:30
Virtual Fracture Testing of Composite Materials and Structures II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Javier LLorca and Brian Cox
|
MS154
Room: CAS3.1
|
Mesolevel Representation of Splitting in Laminates
Frans van der Meer, L. J. Sluys
|
Tuesday, July 1st 14:00 - 16:00
Soft Computing Methods III
Minisymposium organized by Tadeusz Burczynski, Jamshid Ghaboussi and Zenon Waszczyszyn
|
MS094
Room: CAS2.1
|
Multicriteria Shape Optimization of Thermoelastic Structures using Evolutionary Algorithms
Adam Dlugosz, Tadeusz Burczyński
|
Tuesday, July 1st 14:00 - 16:00
Advanced Computational Methods for Wave Motion II
Minisymposium organized by Dan Givoli and Geza Seriani
|
MS036
Room: CAS3.9
|
Effects of Topography on Rotational Ground Motions under Incident Elastic Waves using Boundary Methods
Alejandro Cadena-Isaza, Luis Godinho, Paulo Amado Mendes, Antonio Tadeu, Francisco Luzon, Francisco J. Sanchez-Sesma
|
Tuesday, July 1st 14:00 - 16:00
Advances in Multiscale and Multiphysics Methods: From Quantum to Continuum II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Dong Qian, Wing Kam Liu and Jacob Fish
|
MS265
Room: CAS3.3
|
Electronic Structures of Mechanically Deformed Silicon Nanowires
Ruiqin Zhang, A.J. Lu, S.T. Lee
|
Tuesday, July 1st 16:30 - 18:30
Computational Methods in Multibody Dynamics Simulation VI
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Modeling and Control of 3-D Pinching in Full Variables by Soft Fingers under Non-Holonomic Constraints
Morio Yoshida, Suguru Arimoto, Zhi-Wei Luo
|
Tuesday, July 1st 16:30 - 18:30
Virtual Fracture Testing of Composite Materials and Structures IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Javier LLorca and Brian Cox
|
MS154
Room: CAS3.1
|
In-Situ Characterization of Interface Delamination by a New Miniature Mixed-Mode Bending Setup
Murthy Kolluri, M.H.L Thissen, Johan Hoefnagels, J.A.W. van Dommelen, M.G.D Geers
|
Tuesday, July 1st 16:30 - 18:30
Inverse Problems: Recent Advances in Methodology and Techniques I
Minisymposium organized by Barbara Kaltenbacher and Roland Potthast
|
MS054
Room: CAS1.8
|
Regularized Total Least Squares: Computational Aspects and Error Bounds
Shuai Lu, Sergei Pereverzev, Ulrich Tautenhahn
Hierarchical and Adaptive Concept for the Identification of Material Laws by Boundary Observations
Peter Knabner, Michael Blume
|
Tuesday, July 1st 16:30 - 18:30
Development of a Computational Testbed for Studying Near-Surface Phenomena I
Minisymposium organized by Owen Eslinger
|
MS171
Room: CAS1.5
|
CFD Simulation of Three-Dimensional Airflow over a Vegetated Soil Surface
Phu Luong, Robert Bernard, Stacy Howington
|
Wednesday, July 2nd 10:30 - 12:30
Extended / Generalized Finite Element Method I
Minisymposium organized by Ted Belytschko, Elisa Budyn, John Dolbow, Nicolas Moës and Giulio Ventura
|
MS037
Room: EXC1.3
|
X-Ray Microtomography, X-3D-Digital Image Correlation and X-FEM Multigrid, a General Tool for 3D Crack Growth Law Identification - PROPAVANFIS Collaboration
Marie-Christine Baïetto-Dubourg, J.Y. Buffière, Alain Combescure, Anthony Gravouil, François Hild, N. Limodin, W. Ludwig, Julien Réthoré, Stéphane Roux, J.-P. Tinnes
|
Wednesday, July 2nd 10:30 - 12:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices I
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Numerical Modeling of Nanostructures
Azeddine Benabbou, Houman Borouchaki, Patrick Laug, Jian Lu
|
Wednesday, July 2nd 10:30 - 12:30
STS12: High Reynolds Number Aerodynamics
|
STS12
Room: EXC2.1
|
Optimisation of Supports for High Reynolds Number Testing
Thorsten Lutz, Benedikt König, Martin Pätzold, Ewald Krämer
|
Wednesday, July 2nd 14:00 - 16:00
High-performance Computing in Computational Mechanics II
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
STAR-CD Computational Fluid Dynamics on IBM Blue Gene/P
Stephen Behling, Boris Kaludercic
|
Wednesday, July 2nd 14:00 - 16:00
Inverse Problems: Recent Advances in Methodology and Techniques III
Minisymposium organized by Barbara Kaltenbacher and Roland Potthast
|
MS054
Room: CAS1.8
|
The Linear Sampling Method and Eigenfunctions of the Far Field Operator
Tilo Arens, Armin Lechleiter, Russell Luke
|
Wednesday, July 2nd 14:00 - 16:00
Delamination Including Internal Contact I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Mieczyslaw Kuczma and Bernd Zastrau
|
MS097
Room: CAS2.5
|
Composite Delamination Approaches at MSC Software
Per Nordlund, Adrie Bout
|
Wednesday, July 2nd 16:30 - 18:30
Computational Fracture Mechanics of Heterogeneous Materials and Structures II
Minisymposium organized by Noriyuki Miyazaki and Toru Ikeda
|
MS109
Room: CAS3.8
|
Application of an Atom Continuum Model in Process of Damage Simulation on Multiple Length Scales
Torsten Luther, Carsten Könke
|
Wednesday, July 2nd 16:30 - 18:30
Environment II
|
TS310
Room: CAS1.4
|
Experimental and Numerical Study of the Exhaust Gas Dispersion of Public Light Bus under Idle Condition
Hong-di He, Wei-zhen Lu
|
Wednesday, July 2nd 16:30 - 18:30
Multiple-Scale Physics and Computation II
|
TS323
Room: CAS3.4
|
Multiscale Computations of Fluid-Flows using an Adaptive Wavelet Method
Damrongsak Wirasaet, Samuel Paolucci, Joseph M. Powers
|
Wednesday, July 2nd 16:30 - 18:30
Image-Based Computational Modelling of Materials II
Minisymposium organized by M.A. Siddiq Qidwai and Andrew B. Geltmacher
|
MS210
Room: CAS3.7
|
Image-Based Modelling of Irregular Masonry
Alessandra Brabanera, Federico Cluni, Vittorio Gusella
|
Thursday, July 3rd 10:30 - 12:30
Computational Methods in Composite Materials and Structures IV
Minisymposium organized by Anastasia Muliana, Rami Haj-Ali and Marcin Kaminski
|
MS119
Room: CAS3.1
|
Progressive Failure Analysis with MD Nastran and Genoa
Per Nordlund, Shiva Padmanaban, Claudio Bruzzo, Marco Calcagni
Mixed Finite Element Solution on the-out-of Plane Natural Frequencies of Composite Circular Beams
Bahar Ayhan, Fethi Kadioglu
|
Thursday, July 3rd 10:30 - 12:30
High-performance Computing in Computational Mechanics IV
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
Mesh Domain Decomposition supervised by Control Space
Tomasz Jurczyk, Barbara Glut
|
Thursday, July 3rd 10:30 - 12:30
Adaptive Methods for Material Processing I
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Constitutive Modeling and Simulation of Cold Forming of Ceramic Powders
Andrea Piccolroaz, Davide Bigoni, Alessandro Cocquio, Luca Deseri, Alessandro Gajo, Laura Galuppi
|
Thursday, July 3rd 10:30 - 12:30
STS08: New Technologies in Aero-Engines
|
STS08
Room: EXC2.1
|
Selected Aerothermal CFD Analyses of High-Pressure Turbine Topics within the AITEB-2 Project
Erik Janke, Howard Hodson, B. Facchini, I. Popovic, K. Lehmann, C. Georgakis, L. Pons, E. Lutum, F. Wallin, Bill Dawes, F. Favaretto, L. Toni
|
Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Numerical Homogenization of Periodic Composites by Prescribing the Average Stress
Andrea Caporale, Raimondo Luciano
|
Thursday, July 3rd 14:00 - 16:00
Advanced Materials: Computational Analysis of Properties and Performance I
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
|
MS209
Room: CAS3.1
|
Micromechanics Based Structural Analyses of MMC Components under Finite Strains
Heinz Pettermann, Sergio Nogales, Christopher Huber, Mathias Luxner, Helmut Böhm
|
Thursday, July 3rd 14:00 - 16:00
Biofluids and Coupled Problems in Biomechanics IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Wolfgang Wall, Marek Behr, Matteo Pasquali and Alberto Figueroa
|
MS080
Room: CIN0.1
|
Mathematical Modelling and Numerical Simulation of Blood Flow in Compliant Vessels
Maria Lukacova, Anna Zauskova
|
Thursday, July 3rd 14:00 - 16:00
Multiscale Damage and Failure Mechanics of Engineering Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by J. Woody Ju, Lizhi Sun, Pierre Ladeveze and Olivier Allix
|
MS149
Room: CAS3.7
|
A Multiscale Damage Model for Analysis of Laminated Composites at the Micro Scale
Michaël Trovalet, Pierre Ladevèze, Gilles Lubineau
|
Thursday, July 3rd 14:00 - 16:00
Adaptive Methods for Material Processing II
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Retriangulation Techniques for 3D Mesh Adaptation
Barbara Glut, Tomasz Jurczyk
|
Thursday, July 3rd 14:00 - 16:00
Computational Modelling of Locomotor Systems V
Minisymposium organized by Markus Böl, Stefanie Reese and Bob Svendsen
|
MS208
Room: PGL
|
SubjectSpecific Human Motion Dynamic Simulation on the Basis of 3D Bones and Soft Tissue Measured Morphology
Victor Sholukha, Fedor Moiseev, Olivier Snoeck, Patrick Salvia, Andrej Morozov, Fulvia Taddei, Marcel Rooze, Serge Van Sint Jan
Model-Based Approaches in Biomechanical Movements: From the Assessment to the Interpretation in Clinical Use
Guenter Rau, Thomas Schmitz-Rode, Catherine Disselhorst-Klug
|
Thursday, July 3rd 14:00 - 16:00
Computational Materials Mechanics I
|
TS318
Room: CAS3.8
|
Study of the Influence of Ratio of Young’s Moduli on Critical Stresses applied to Bimaterial Notches
Jan Klusak, Zdenek Knesl
|
Thursday, July 3rd 16:30 - 18:30
Advances in Time-Integration III
Minisymposium organized by Adrian Lew, Eric Darve and Isaac Harari
|
MS084
Room: CAS3.5
|
Efficient Iterative Solver to compute Unsteady Flows solved with Higher Order Implicit Time Integration Schemes
Peter Lucas, Hester Bijl
|
Thursday, July 3rd 16:30 - 18:30
Advanced Materials: Computational Analysis of Properties and Performance II
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
|
MS209
Room: CAS3.1
|
Multiscale and Multyphysics Modeling of Filled Composites, Design Validation of the Models and Uncertainty in the Modelling
Sergey Lurie, Dmitrii Volkov-Bogorodskii, Natalia Tuchkova, Vladimir Zubov
|
Thursday, July 3rd 16:30 - 18:30
Optimization and Control III
|
TS325
Room: CAS1.3
|
Optimization Formulations for Composite Structures subjected to Compression Loads
Esben Lindgaard Olesen, Erik Lund, Lars Chr. T. Overgaard
Parallel Hierarchical Optimization of Geometrically Nonlinear Laminated Composite Structures
Leon Johansen, Erik Lund
Puck Failure Criterion as Constraint in the Optimization of Laminated Composites
Rafael H. Lopez, Marco Luersen, Eduardo Cursi
|
Thursday, July 3rd 16:30 - 18:30
Meshfree and Generalized/Extended Finite Element Methods III
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Mixed Time-Stepping for Coupled Meshfree and Finite Element Simulations
Arun Prakash, William Elmer, Ertugrul Taciroglu
|
Friday, July 4th 10:30 - 12:30
Patient Specific Computational Modelling I
Minisymposium organized by Perumal Nithiarasu and Rainald Lohner
|
MS070
Room: CAS1.4
|
Patient-Specific Modelling of Haemodynamics in an Aneurismal Thoracic Aorta
Igor Sazonov, Prihambado Saksono, Perumal Nithiarasu, Heyman Luckraz, Raoul van Loon
|
Friday, July 4th 10:30 - 12:30
Computational Methods in Impact Engineering I
Minisymposium organized by Ashkan Vaziri, Zhenyu Xue, Dirk Mohr and Horacio Espinosa
|
MS017
Room: CIN0.1
|
A Multi-Scale Approach for Modeling Anisotropic Dynamic Response of Textured Polycrystals
Oana Cazacu, Brian Plunkett
|
Friday, July 4th 10:30 - 12:30
Structural Stability I
Minisymposium organized by Herbert Mang and Zsolt Gaspar
|
MS083
Room: EXC2.2
|
Buckling of a Spindle Shaped Tensairity Column under Compression: A Numerical–Experimental Study
Theofanis Plagianakos, Rolf Luchsinger, Rene Crettol
|
Friday, July 4th 10:30 - 12:30
Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia
|
MS079
Room: PGL
|
An Efficient Solution Strategy for Coupled Multi-Field Problems using Adaptive Integration and Time-Stepping
Peter Moonen, Jan Carmeliet, Bert Sluys
|
Friday, July 4th 10:30 - 12:30
Advancement in Numerical and Physical Modeling of Free-Surface Flows I
Minisymposium organized by Lian Shen and Feng Xiao
|
MS044
Room: CAS2.5
|
Compressible Two-Phase Flow in Sloshing Tanks
Roel Luppes, Rik Wemmenhove, Arthur E.P. Veldman, Tim Bunnik
|
Friday, July 4th 10:30 - 12:30
Inverse Problems for Parameter Identification V
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
Identification of Global and Local Parametrization of Material Laws in Fluid Flow and Reactive Transport through Porous Media by Hierarchical and Adaptive Output Least Squares Minimization
Michael Blume, Peter Knabner
|
Friday, July 4th 10:30 - 12:30
Computational Materials Mechanics III
|
TS318
Room: CAS3.8
|
A Consistent Eulerian Rate Model for Finite Pseudoelasticity
Patrick Luig, Otto Bruhns
|
Friday, July 4th 14:00 - 16:00
Inverse Problems for Parameter Identification VI
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
Pointwise Identification of Elastic Properties in Nonlinear Hyperelastic Membranes
Jia Lu, Xuefeng Zhao
|
Friday, July 4th 14:00 - 16:00
Computational Materials Mechanics IV
|
TS318
Room: CAS3.8
|
Simulation of Composite Manufacturing with MSC Products
Sanjay Choudhry, Shiva Padmanaban, Sheng Ping Wang, Per Nordlund, Claudio Bruzzo, Marco Calcagni
|
Friday, July 4th 14:00 - 16:00
Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia
|
MS079
Room: PGL
|
Modeling of Porous Functionally Graded Bio-Degradable Implants for Bone Replacement
Tim Ricken, Joachim Bluhm, Matthias Epple, Thomas Annen, Michael Wehmöller, Harald Eufinger, Moritz Blossfeld
|
Friday, July 4th 14:00 - 16:00
Meshfree and Generalized/Extended Finite Element Methods V
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
A Comparison between GFEM and an Embedded Discontinuity Approach
D. Dias da Costa, Jorge Alfaiate, L. J. Sluys, E. Júlio
|
Friday, July 4th 16:30 - 18:30
Second Level Preconditioners for Krylov Subspace Methods II
Minisymposium organized by Reinhard Nabben and Kees Vuik
|
MS048
Room: CAS2.4
|
A Rigorously Justified Robust Algebraic Preconditioner for High-Contrast Diffusion Problems
Burak Aksoylu, Hector Klie, Ivan G. Graham, Robert Scheichl
|
Friday, July 4th 16:30 - 18:30
Multiphysics Modelling of Porous Media: Geomaterials, Biomaterials and Others IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Younane N. Abousleiman, Stefan Diebels and Lorenzo Sanavia
|
MS079
Room: PGL
|
Modeling of Freezing and Thawing Cycles of Saturated Porous Media
Joachim Bluhm, Tim Ricken, Wolfgang Moritz Bloßfeld
|
Friday, July 4th 16:30 - 18:30
Industrial Applications III
|
TS316
Room: CAS1.6
|
Computational System to Help the Stress Analysis around Boreholes in Petroleum Industry
Fabiana Leta, Maria Souza, Esteban Clua, Mauro Biondi, Toni Pacheco
|
Friday, July 4th 16:30 - 18:30
Numerical Modelling of Hydrodynamic Geophysical Flows IV
Minisymposium organized by Tomas Chacon Rebollo and Edie Miglio
|
MS062
Room: CAS2.6
|
Modeling and Simulation of Turbidity Currents
Tomas Morales de Luna, Manuel J. Castro, Carlos Parés Madroñal, Enrique Fernández Nieto
|
