|
|
Search
26/9/17 11:00 - 13:00
Opening Ceremony and Plenary Lectures I
|
TuMP
Room: Auditorium - VII 201
|
Modeling and simulation of functionalized materials for additive manufacturing and 3-D printing
T. Zohdi
Particle method for incompressible viscous flow with free surfaces: Fundamental modeling and industrial application
S. Koshizuka
|
26/9/17 14:00 - 16:00
IS - Material Point Method – Recent Advances
Invited Session organized by Zhen Chen and Xiong Zhang
|
TuA04
Room: Euler - l 401
|
Extended material point method for crack problems
Y. Liang, X. Zhang
Particle-based multiscale and multiphysics simulation within the framework of material point method
Z. Chen, S. Jiang, J. Tao
Improvement on the material point method with B-spline basis functions
Y. Gan, Z. Sun, Y.G. Shen
Dual domain material point method with sub-points for thermodynamic nonequilibriums
D.Z Zhang, T.R. Dhakal
Smoothed material point method for simulating transient responses
L. He, Z. Chen, Y. Gan
Implicit grid-based and meshless MPM formulations
A. Larese, I. Iaconeta, R. Rossi, E. Oñate
|
26/9/17 14:00 - 16:00
IS - Multiscale Numerical and Experimental Analysis of Particle Systems (T-MAPPP Symposium) I
Invited Session organized by Jin Ooi, Stefanos Papanicolopulos and Antonia Larese
|
TuA01
Room: Auditorium - VII 201
|
Steady state rheology from homogeneous and locally averaged simple shear simulations
H. Shi, S. Roy, S. Luding, V. Magnanimo
Dust emission in silicon carbide and alumina-coated silicon carbide particles used for long-term industrial processes
S. Chakravarty, M. Fischer, O.L.C. Le Bihan, M. Morgeneyer
Wave propagation in glass-rubber granular mixtures
K. Taghizadeh, H. Steeb, V. Magnanimo, S. Luding
A numerical analysis of a twin screw mixer using dry cohesion less material and experimental validation
R. Mohanty, P. Gupta, L. Martin de Juan, J. Castro, J.Y. Ooi
|
26/9/17 14:00 - 16:00
IS - Advanced Particle Methods for Continuum Mechanics
Invited Session organized by Seiya Hagihara, Seiya Hagihara and Minoru Shirazaki
|
TuA02
Room: Newton - l 201
|
Smoothed particle hydrodynamics method for fluid-structure interaction analysis - Fluid analysis and elastic-plastic structural analysis-
S. Hagihara, C. Kai, S. Taketomi, Y. Tadano, S. Tanaka
Modelling of the dispersed phase motion in free-surface flows with the two-fluid Smoothed Particle Hydrodynamics approach
M. Olejnik, K. Szewc, J. Pozorski
Analysis of polymer plasticization by DEM – MPS coupling simulation
Y. Fukuzawa, T. Shigeishi, K. Munemasa, H. Tomiyama, M. Yamanoi, S. Koshizuka
A posteriori error estimation technique for particle methods using meshfree compact schemes
T. Tamai, S. Koshiduka
Simulation of Lanimar flows over a backward-facing step using an ALE particle method
F. Hu, T. Tamai, S. Koshizuka
Verification of the moving particle semi-implicit method for multi-physics simulation in thermosplastic injection process
N. Benkemoun, S. Koshizuka, K. Shibata
|
26/9/17 14:00 - 16:00
IS - Industrial and Manufacturing Applications
Invited Session organized by Pablo A. Becker, Josep Maria Carbonell and Alessandro Franci
|
TuA03
Room: Gauss - l 301
|
The Basset history force in point-particle simulations: Optimizing the method of van Hinsberg et al.
G. Casas, À. Ferrer, E. Oñate
Applications of the Particle Finite-Element Method (PFEM) in modelling manufacturing processes
J.M. Carbonell, P. Jonsén, A. Svoboda, J.M. Rodriguez
Characterization of fluid-mechanic efficiency of porous electrodes using X- ray computed tomography and Lattice-Boltzmann simulations
D. Maggiolo, A. Trovò, F. Picano, F. Zanini, S. Carmignato, M. Guarnieri
Numerical analysis of powder mixing dynamics in a ribbon mixer
A. Janda, C. Labra
Oblate and prolate particles in a quasi-2D silo.
B. Szabo, Z. Kovacs, D. Fischer, A. Ashour, S. Wegner, R. Stannarius, T. Borzsonyi
|
26/9/17 14:00 - 16:00
IS - Modelling of Degradation and Damage of Granular Materials
Invited Session organized by Geir Horrigmoe and Kent Tano
|
TuA05
Room: Leibniz - VII 002
|
Multi-physics modelling and validation of interactions between pulp, charge and mill structure in tumbling mills
P. Jonsén, S. Hammarberg, B. Pålsson, G. Lindkvist, G. Gustafsson, H.-Å. Häggblad
Numerical simulation and validation of impact-loaded iron ore pellets
G. Gustafsson, H.-Å. Häggblad, P. Jonsén, S. Larsson
Impact force analysis with the nonsmooth discrete element method
M. Servin, T. Berglund, K.-M. Mickelsson
Numerical analysis of segregation of granular materials in sandpile formation
T. Zhang, Z. Zhou, A. Yu, D. Pinson
|
26/9/17 14:00 - 16:00
Bio-Medical and Pharmaceutical Processes
|
TuA06
Room: Bernoulli - VII 003
|
Modelling of Milling Behaviour of Pharmaceutical Materials
T. Bonakdar, M. Ghadiri, A. Hassanpour, K. Roberts
Predictive modelling of continuous powder blending with application in the pharmaceutical industry
Y. Ghaffari Motlagh, A. Hassanpour, A. Bayly
Powder flow within a pharmaceutical tablet press - A DEM analysis
C. Hildebrandt, S.R. Gopireddy, R. Scherließ, N.A. Urbanetz
Amphiphilic star-like polymers in linear shear flow
D.F. Jaramillo, M.A. Camargo, C.N. Likos
Modelling of a textile endovascular graft in an aneurysm with clot formation: a multi-scale approach
R.A. Valencia, M.J. Garcia, J. Bustamante
|
26/9/17 14:00 - 16:00
Concrete Material & Structures
|
TuA07
Room: Kirchhoff - VII 004
|
DEM analyses of effect of interfacial transitional zones on fracture in concrete
M. Nitka, J. Tejchman
Virtual concrete specimens: A discrete element approach to the generation of densely packed ensembles of virtual aggregates
D.S. Reischl, M. Curbach
Size effect in concrete under tensile splitting - experiments and DEM analyses for different failure modes
J. Suchorzewski, J. Tejchman
Discrete element modelling of concrete structures under hard impact
A. Antoniou, L. Daudeville, P. Marin, S. Potapov
Long-term cyclic triaxial tests with DEM simulations
G. Zorzi, F. Kirsch, F. Gabrieli, F. Rackwitz
A multifield discrete element model for concrete
C. Flack, F. Ockelmann, D. Dinkler
|
26/9/17 16:30 - 18:30
IS - Segregation in Granular Systems
Invited Session organized by Anthony Thornton, Thomas Weinhart and Deepak Tunuguntla
|
TuE04
Room: Euler - l 401
|
Size segregation in dense granular flows: The granular Saffman effect
M.P. van Schrojestein Lantman, K. van der Vaart, S. Luding, T. Weinhart, C. Ancey, A.R. Thornton
Scaling the percolation velocity for quantitative prediction of segregation due to size/density difference in flowing granular mixtures
M. Prasad, M. Nema, A. Tripathi
Computational modeling of flow and size segregation in a stockpile with multiple outlets
M. Servin, T. Berglund, J. Boström
Segregation in sheared granular media: Effects of intrinsic particle properties such as size, density and shape
G.G. Pereira, P.W. Cleary
Simulating and modelling segregating rods and spheres
R.M. Lueptow, Y. Zhao, R.P. Jones, P.B. Umbanhowar
Segregation-induced granular fingering
C. Rocha , C. Johnson , N. Gray
|
26/9/17 16:30 - 18:30
IS - Models and Tools for Particulate Flows undergoing Phase Change or Reactions
Invited Session organized by Stefan Radl, Christoph Kloss, Christoph Goniva and Shahriar Amini
|
TuE02
Room: Newton - l 201
|
CFD-DEM modelling of residence time distributions of particles in a Two-Zone Fluidized Bed Reactor (TZFBR)
M. Hettel, O. Deutschmann
Voidage and fluid speed correction algorithms for improved heat and mass transfer predictions in unresolved particle simulations
M. Askarishahi, M.-S. Salehi, S. Radl
Porous and sponge-like particle behaviour within a rotary drum and spray coating
A. Aigner, C. Kloss
Arbitrary order boundary reconstruction algorithm for robin boundary conditions in particle-resolved direct numerical simulations
F. Municchi, S. Radl
Development of a fluid-solid multiphase flow simulator by a SPH-DEM coupled method for simulating a seawall destruction due to soil foundation scour
K. Harasaki, M. Asai
|
26/9/17 16:30 - 18:30
Mixing Processes
|
TuE08
Room: Germain - VII 005
|
Evaluation of blended coking coal mixing to disintegrate quasi-particles applying Discrete Element Method
N. Kubo, Y. Dohi, T. Matsui
Modeling mixing in high heterogeneous media: the role of the water discretization for phase space formulation
J. Soler-Sagarra, J. Carrera , E. Bonet-Gil , P.A. Becker , R. Rossi
Numerical viscosity measurement method for solid-liquid mixture
R. Nomura, K. Terada, S. Takase, S. Moriguchi
Particle based simulation of rarified gas mixing in a T-shape micromixer
M. Hussain, S. Mühlbauer, P. Müller, T. Pöschel
|
26/9/17 16:30 - 18:30
Railway Ballast
|
TuE06
Room: Bernoulli - VII 003
|
DEM modelling of railway ballast under shear and compression
K. Six, B. Suhr
Shape characterization of railway ballast stones for discrete element calculations
J. Irazábal, F. Salazar, E. Oñate
3D Laser scanning technique coupled with 3D DEM GPU simulations for railway ballasts
P. Pizette, N. Govender, D.N. Wilke, B. Gobé, N.-E. Abriak, R.K. Rajamani
Deformations in railway ballast due to contact induced damage – A DEM study
E. Olsson, D. Jelagin, P.-L. Larsson, P.A. Forquin
|
26/9/17 16:30 - 18:30
IS - XDEM - A Software Platform for Advanced Multi-Physics Simulation Technology
Invited Session organized by Bernhard Peters, Henrik Rusche and Hrvoje Jasak
|
TuE03
Room: Gauss - l 301
|
The XDEM multi-physics and multi-scale simulation platform: Methodology and engineering applications
H. Rusche, B. Peters, H. Jasak
Increasing the computational efficiency of discrete-continuous coupled methods: A powder metallurgy case study
A.A. Estupinan Donoso, R. Useldinger
Biomass combustion on a reciprocating grate: coupled CFD-XDEM modelling
N. Bitossi, C. Galletti, M. G. Gallo, F. Sansone, B. Peters
Dynamic sintering of a high temperature granular material: Experiments and simulations
C. L. Willibald, B. W. Kabore, T. C. Theile, D. Szabó, M. Schneebeli, B. Peters
Modelling of the thermochemical processes in the gasifier reactor using XDEM method
I. Wardach-Święcicka, D. Kardaś, B. Peters
Graphical user interface for multi-physics simulations of particulate matter
F. Hoffmann, F. Vogel
|
26/9/17 16:30 - 18:30
Industrial Applications I
|
TuE07
Room: Kirchhoff - VII 004
|
Fluid-particle energy transfer in spiral jet milling
S. Dogbe, M. Ghadiri, A. Hassanpour, C. Hare, D. Wilson, R. Storey, I. Crosley
Effect of impeller geometry on dry powder flow dynamics
W. Goh, M. Ghadiri, F. Muller, K. Sinha, N. Nere, R. Ho, S. Bordawekar, A. Sheikh
Influence of the section size on the simulation accuracy in a Wurster coater
P. Böhling, D. Jacevic, C. Davies, A. Carmody, P. Doshi, M.T. am Ende, A. Sarkar, J.G. Khinast
Investigation of particle properties on the holding force in a granular gripper
S. Meuleman, V.A. Balt, A. Jarray, V. Magnanimo
Simulation of Trypanosoma Cruzi swimming in shear flow
A. Castillo, G. Villalobos
|
26/9/17 16:30 - 18:30
Material Point Method (MPM)
|
TuE05
Room: Leibniz - VII 002
|
Hydro-mechanical coupled dual domain material point method stabilized with a null-space filter
Q.A. Tran, W.T. Solowski, E. Cummings
The material point method in offshore geotechnical engineering
M. Bürg, R. Brinkgreve
A high order MPM for 2-phase problems
E. D. Wobbes, C. Vuik, V. Galavi
Smooth Plasticity and Damage Model for the Material Point Method
C.D. Sofianos, V.K. Koumousis
Estimation of granular flow impact force on rigid wall using generalized interpolation material point method
S. Seyedan, W.T. Solowski
Nonlinear stability of the MPM method
M. Berzins
|
26/9/17 16:30 - 18:30
IS - Multiscale Numerical and Experimental Analysis of Particle Systems (T-MAPPP Symposium) II
Invited Session organized by Jin Ooi, Stefanos Papanicolopulos and Antonia Larese
|
TuE01
Room: Auditorium - VII 201
|
Analysis of particle rearrangement in high-load tableting with a DEM-based elasto-plastic cohesive model
R. Cabiscol, J.H. Finke, A. Kwade
A DEM-PBM coupling approach for prediction of milling behaviour in an impact pin mill
X. Chen, L. Wang, J.. Ooi
Influence of inter-particle properties on the elastic moduli of granular materials
K. Taghizadeh, R.G.H. Kievitsbosch, H.J. Smit, V. Magnanimo, S. Luding
Modeling of granular compaction under confinement with DEM
K.P. Giannis, M.A. Celigueta, A. Kwade
Influence of blockiness and bumpiness on modelling dense granular flows of non-spherical particles
B. Soltanbeigi, A. Podlozhnyuk, S.A. Papanicolopulos, C. Kloss, J.Y. Ooi
|
27/9/17 09:00 - 11:00
Plenary Lectures II
|
WeMP
Room: Auditorium - VII 201
|
Particle-Based Modeling and Simulation in Cell Mechanics: From Adhesion and Contraction to Migration
J.M. García-Aznar
Build-up of electrical charges in granular clouds
Hans J. Herrmann
Time extrapolation of multiphase flow simulations by recurrence CFD - Offline simulations and explicit online approaches
S. Pirker
|
27/9/17 11:30 - 13:30
IS - Complex Particle Suspensions I
Invited Session organized by Christopher Leonardi, Yuntian Feng and Bruce D. Jones
|
WeM03
Room: Gauss - l 301
|
LBM-DEM modelling of particles in viscoplastic fluids without regularisation
C.R. Leonardi, W. Regulski, N.J. Di Vaira
Self-assembly of colloidal particles at liquid interfaces
J. Harting
Lattice Boltzmann based discrete simulations for particle-fluid two-phase flows
L. Wang
Pattern formation in laminar flow of suspensions through square channels
P. Seil, S. Pirker, T. Lichtenegger
Capturing the transient characteristics of thermally varying particle suspensions
J.W.S. McCullough, C.R. Leonardi, S.M. Aminossadati
An improvement on the coupling of particle suspensions using the Lattice Boltzmann and discrete element methods with immersed moving boundaries
D. Wang, C. Leonardi, S. Aminossadati
|
27/9/17 11:30 - 13:30
Discrete Element Methods I
|
WeM07
Room: Kirchhoff - VII 004
|
Arching and clogging in three-dimensional silo
S. Lévay, J. Török
Continuum-based analysis of DEM simulations for industrial processes
C. Labra, A. Janda
DEM simulation of flat, flexible bodies using 2D triangulated meshes
M. Leman, W. Saeys, B. Smeets, T. Leblicq, S. Vanmaercke
DEM-CFD analysis of particle attrition in a cyclone
F. Fulchini, M. Ghadiri, A. Borissova, M. Yazdan Panah, S. Bertholin, B. Amblard, A. Cloupet, T. Gauthier
Simulation of stressing probability and energy distribution within stirred media mills using a coupled CFD-DEM approach
C. Schilde, S. Beinert, G. Fragnière, B. Finke, A. Kwade
|
27/9/17 11:30 - 13:30
Geomechanics I
|
WeM06
Room: Bernoulli - VII 003
|
Grain scale parameters in dissipative driven constitutive models
R.A. Mukwiri, W.M. Coombs, Y. Ghaffari Motlagh, C.E. Augarde
Influence of seepage and inclination on the initiation of motion of non-spherical sediment particles: A numerical approach
R. Bravo, P. Ortiz
Erosive phenomena at the mesoscale – Perspectives and challenges using coupled LBM-DEM models
P. Cuéllar, L.-H. Luu, Z. Benseghier, F. Brunier-Coulin, P. Philippe, S. Bonelli, J.-Y. Delenne
Coupled distinct element method computational fluid dynamics analyses for reservoir landslide modelling
S. Utili, T. Zhao, G.B. Crosta
Topographical effects on granular gravity currents
J. M. F. Tsang, S. B. Dalziel, N. M. Vriend
|
27/9/17 11:30 - 13:30
IS - Multiscale Numerical and Experimental Analysis of Particle Systems (T-MAPPP Symposium) III
Invited Session organized by Jin Ooi, Stefanos Papanicolopulos and Antonia Larese
|
WeM01
Room: Auditorium - VII 201
|
Effect of capillary and viscous forces on the flow of wet granular materials
A. Jarray, V. Magnanimo, S. Luding
The prediction of the viscosity of dense Brownian hard sphere colloidal suspensions using Stokesian dynamics
Y.M.F. El Hasadi, M. Crapper
An investigation on liquid bridge force between particles
N. Patsaki, R. Scharler
Rheological analysis of wet cohesive granular packings under simple shear deformation using DEM: Effect of particle size and scaling parameters
G. Raso, V. Magnanimo, S. Luding, H.E. Stitt, M. Marigo, J.Y. Ooi
Simulation of granular flow problems with an implicit material point method
I. Iaconeta, A. Larese, R. Rossi, E. Oñate
|
27/9/17 11:30 - 13:30
IS - Discrete Modelling in Cell and Tissue Mechanobiology I
Invited Session organized by Jose Manuel Garcia-Aznar, Herman Ramon and Paul Van Liedekerke
|
WeM05
Room: Leibniz - VII 002
|
Quantitative hybrid modeling to predict realistic mechanical stressses in growing tumor spheroids and tissues using agent-based models
P. Van Liedekerke, T. Johann, J. Neitsch, D. Drasdo
A discrete element framework for modelling cell and tissue behaviour with application to modelling chondrocyte migration
G.R. Joldes, D.W. Smith, B.S. Gardiner
A model for cell migration in non-isotropic fibrin networks with an application to pancreatic tumor islets
J. Chen, D. Weihs, F. J. Vermolen
Multi-level particle-based modeling and simulation of cell biological systems
T. Köster, A.M. Uhrmacher
Biological lattice gas cellular automata models for the analysis of collective cell behaviour
Andreas Deutsch
|
27/9/17 11:30 - 13:30
Free Surface Flows
|
WeM02
Room: Newton - l 201
|
A FEM-SPH coupling approach for the simulation of FSI problems with free surfaces
J. Stasch, B. Avci, P. Wriggers
Development of surface tension model with many-body potential force
M. Kondo
Fusional method of MPS and FEM through tetrahedral mesh generation
J. Imamura
Numerical simulation and validation of powder filling using particle based methods
S. Larsson, J. M. Carbonell, J. M. Rodriguez Prieto, G. Gustafsson, P. Jonsén, H.-Å. Häggblad, M. A. Celigueta, S. Latorre
Granular flows in inclined channels with linear contractions
D. Tunuguntla, I. Denissen, T. Weinhart, A. Thornton
Numerical model for single film bubble with double liquid-gas interfaces by particle methods
Z.G. Sun, N. Ni, G. Xi
|
27/9/17 11:30 - 13:30
IS - Parallel High Performance Simulation within the Framework of Particle-Based Methods I
Invited Session organized by Peter Wriggers, Eugenio Oñate, Bircan Avci and Pooyan Dadvand
|
WeM04
Room: Euler - l 401
|
Keynote-Talk: GPUs and SPH technique, growing in parallel
A. Crespo, J. Domínguez, B. Rogers, M. Gómez-Gesteira
A comparative study of incompressible and weakly-compressible multi- fluid flows in SPH and their performance
J.-P. Fürstenau, B. Avci, P. Wriggers
Effective and fast large scaled Tsunami run-up analysis using explicit ISPH method
K. Ogasawara, M. Asai, M. Furuichi, D. Nishiura
Mesoscopic simulations of electrohydrodynamic colloidal suspensions
N. Rivas, J. Harting
|
27/9/17 14:30 - 16:30
Material Modelling and Characterization
|
WeA02
Room: Newton - l 201
|
An approach to DEM material characterization in cohesive granular bulk solid materials
L.I. Del Cid, A. Subramanian
Characterization of mesoscopic structure in cohesive powders by X-Ray computed tomography and prediction by the discrete element method
A. Abi-Mansour, S. McClure, M. Gentzler, W. Zheng
Modelling of stressing characteristics in media mills
C. Burmeister, L. Titscher, S. Zellmer, S. Breitung-Faes, A. Kwade
Generation and mechanical characterization of particulate coatings via DEM simulations - An application to Lithium-ion battery electrodes
C. Sangrós Giménez, C. Schilde, A. Kwade
Bayesian calibration of microCT-based DEM simulations for predicting the effective elastic response of granular materials
H. Cheng, A. Pellegrino, V. Magnanimo
|
27/9/17 14:30 - 16:30
IS - Complex Particle Suspensions II
Invited Session organized by Christopher Leonardi, Yuntian Feng and Bruce D. Jones
|
WeA03
Room: Gauss - l 301
|
Application of coupled DEM and SPH to complex industrial and biophysical particle suspension problems
P.W. Cleary, M.D. Sinnott, S. Harrison
Simulating the rheology of complex fluids using smoothed particle hydrodynamics
R.H.A. IJzermans
Modelling and simulation of dense particle systems with complex suspending media
A. Vazquez-Quesada, M. Ellero
Modelling and simulation of froth flotation process based on smoothed particle hydrodynamics
J. Kwon, J. Je, H. Cho
Numerical simulation of dense gas-solid flow with large particle size difference by fictitious particle method
T. Tsuji, K. Higashida, Y. Nagahashi, T. Tanaka
Reducing the computational costs of CFD-DEM simulations by coupling multiple coarse grain levels
D. Queteschiner, T. Lichtenegger, S. Pirker, S. Schneiderbauer
|
27/9/17 14:30 - 16:30
IS - Parallel High Performance Simulation within the Framework of Particle-Based Methods II
Invited Session organized by Peter Wriggers, Eugenio Oñate, Bircan Avci and Pooyan Dadvand
|
WeA04
Room: Euler - l 401
|
Keynote-Talk: Recent Developments in Implicit Incompressible SPH
M. Teschner
Towards large-scale parallel GPU-accelerated SPH for FSI problems
M. Gestrich, S. Adami, T. Aoki, T. Indinger
Large-scale simulations for fluid-particle systems using coupled LBM-DEM on a GPU supercomputer
S. Watanabe, T. Aoki, Y. Hasegawa
Potential for interactive design simulation in discrete element modelling
D.N. Wilke, N. Govender, P. Pizette, R. Rajamani
Numerical study on the effect of particle shape on mixers on GPUS
N. Govender, D. Wilke, R. Rajamani, P. Pizette, J. Khinast, B. Glasser
|
27/9/17 14:30 - 16:30
Geomechanics II
|
WeA06
Room: Bernoulli - VII 003
|
Scattering Correlations in a Granular Chain
R.K. Shrivastava, K. Saitoh, S. Luding
Numerical modelling of fiber reinforced jammed granular columns.
P.S. Iliev, F.K. Wittel, H.J. Herrmann
Investigations on the influence of suction dredging on the failure mechanism of subaqueous slopes with coupled CFD-DEM
M. Kanitz, J. Grabe, A. Hager, C. Goniva
A study of principle stress rotation on granular soils using DEM simulation of hollow cylinder test
B. Farhang, A.A. Mirghasemi
Investigations of quasi-static vortex-structures in 3D sand specimens based on DEM and Helmholtz-Hodge vector field decomposition
J. Kozicki, J. Tejchman
Hydrodynamics of a jet impinging on a granular layer
Z. Benseghier, P. Cuéllar, L.H. Luu, JY. Delenne, S. Bonelli, P. Philippe
|
27/9/17 14:30 - 16:30
Molecular Dynamics (MD) I
|
WeA08
Room: Germain - VII 005
|
Loss of memory in dense sheared particulate systems
L. Kondic, L. Kovalcinova, M. Kramar, K. Mischaikow
Numerical model for nanoporous silica and discrete simulation of their mechanical comportment for building insulation applications
E. Guesnet, R. Dendievel, D. Jauffrès, C. Martin, B. Yrieix
Evaluation of particle-scale radiative heat transfer in polydisperse beds
Andrei I. Malinouski, Oscar S. Rabinovich
Characterizing gas film conduction for particle-particle and particle-wall collisions
A.M. Hobbs, J.Y. Ooi
Molecular dynamics study of the acoustic emission during nanoindentation of iron crystal
A.Yu. Nikonov, A.I. Dmitriev, A.V. Fillipov, V.E. Rubtsov, S.Yu. Tarasov
|
27/9/17 14:30 - 16:30
IS - Discrete Modelling in Cell and Tissue Mechanobiology II
Invited Session organized by Jose Manuel Garcia-Aznar, Herman Ramon and Paul Van Liedekerke
|
WeA05
Room: Leibniz - VII 002
|
Methods for simulating actin filament dynamics in MCell
K. Pajo, M.I. Stefan
Particle-based mesoscale model for simulations of cells in flow
K. Lykov, Y. Nematbakhsh, C.T. Lim, I.V. Pivkin
Microscale modeling of damage and fracture of Nacre
M.Q. Chandler, J.-R.C. Cheng
A particle model for prediction of cement infiltration in osteoporotic femoral augmentation
S.J. Ramos-Infante, M.A. Pérez-Ansón
|
27/9/17 14:30 - 16:30
Discrete Element Methods II
|
WeA07
Room: Kirchhoff - VII 004
|
A stable, implicit time integration scheme for Discrete Element Method and contact problems in dynamics
R. Lichtenheldt
CFD-DEM Modelling of blast furnace tapping
M. Vångö, T. Lichtenegger
Inclined chute flow of rod-like particles using the Discrete Element Method
M. Saeki, R. Arai
Modelling self-contact in metallic alloys with the Discrete Element Method
R. Gibaud, É. Guesnet, P. Lhuissier, L. Salvo
An energy conserving explicit time-integration scheme for Discrete Element Methods with variable time-steps
F. Marazzato, C. Mariotti, L. Monasse, A. Ern
A leapfrog rotational algorithm using Rodrigues parameterization applied to DEM
M. Sampaio, P. Pimenta
|
27/9/17 14:30 - 16:30
IS - Multiscale Numerical and Experimental Analysis of Particle Systems (T-MAPPP Symposium) IV
Invited Session organized by Jin Ooi, Stefanos Papanicolopulos and Antonia Larese
|
WeA01
Room: Auditorium - VII 201
|
Stress evolution in cyclic shear of dense suspensions
T. Najuch, J. Sun
Modeling of strongly polydisperse particulate systems for CFD-DEM simulations
T. Lichtenegger
Accelerated heat transfer simulations using coupled CFD and DEM
M. Sousani, A.H. Hobbs, A. Anderson, R. Wood
A study on the drag, lift and torque coefficients for superquadric particles using an immersed boundary solver
A. Podlozhnyuk, F. Municchi, C. Goniva, S. Pirker, S. Radl, C. Kloss
Investigation of residence time and collision velocity in a Wurster fluidized bed using CFD-DEM simulations
Z. Jiang, A. Bück, E. Tsotsas
|
27/9/17 16:30 - 18:30
Molecular Dynamics (MD) II
|
WeE07
Room: Germain - VII 005
|
Investigation of the dynamic fragmentation of shock-induced sheets of liquid metal using large-scale molecular dynamics simulations
O. Durand, L. Soulard
Implementation of MCA in the framework of LIGGGHTS
N. Salman, M. Wilson, A. Neville, A.Y. Smolin
Molecular dynamics study of sliding mechanisms of Ni, amorphous Ni-P and nanocrystalline Ni films
A.I. Dmitriev, A.Y. Nikonov, W. Österle
Coupling of finite elements and molecular dynamics at finite temperature
T. Willerding, M. Bischoff
Calculation of nitrogen flow in nickel micronozzle based on numerical approaches of gas and molecular dynamics
V.O. Podryga, S.V. Polyakov
|
27/9/17 17:00 - 17:00
Forming Processes I
|
WeE04
Room: Leibniz - VII 002
|
Numerical simulation of solidification phenomena of molten droplet at different impact velocity
S. Kondo, H. Mamori, N. Fukushima, M. Yamamoto
Simulation of low-pressure powder compaction using an elastoplastic discrete element model
J. Rojek, S. Nosewicz, D. Lumelskyj, B. Romelczyk, K. Bochenek, M. Chmielewski
Modelling and simulation of dry powder compaction for ceramic materials by means of discrete element method and weighted Voronoi tessellation.
S. Rasche, A. Tahir, C. Könke
Numerical analysis of molten metal convection during gas metal arc welding using three-dimensional incompressible SPH method
H. Komen, M. Shigeta, M. Tanaka
Process simulation of deep penetration laser welding by coupling a Smoothed Particle Hydrodynamics model with a ray-tracing scheme.
H. Hu, F. Fetzer, P. Berger, P. Eberhard
modelling of material flow in stir friction welding using movable cellular automaton method
A.Y. Smolin, G.M. Eremina, S.G. Psakhie
|
27/9/17 17:00 - 19:00
IS - Particle-based Methods for Fluids and Fluid-Structure Interaction Problems
Invited Session organized by Sergio Idelsohn and Eugenio Oñate
|
WeE03
Room: Euler - l 401
|
Multi-scale and –physics tsunami disaster simulation for disaster prevention and mitigation
M. Asai, I. Nur‘Ain
Lattice Boltzmann flux solver for simulation of viscous hypersonic flows
Z.X. Meng, L.M. Yang, C. Shu, W.H. Zhang, F. Hu, S.Z. Li
Coupled PFEM-DEM-FEM formulations for analysis of particulate flows and their interaction with structures
A. Franci, M.A. Celigueta, J.M. Carbonell, G. Gasas, E. Oñate
A fully explicit fluid-structure interaction approach based on PFEM and FEM
S. Meduri, M. Cremonesi, U. Perego
PFEM based solvers implemented in the OpenFOAM® suite
J.M. Gimenez, H.J. Aguerre, N.M. Nigro, S.R. Idelsohn
|
27/9/17 17:00 - 19:00
IS - Complex Particle Suspensions III
Invited Session organized by Christopher Leonardi, Yuntian Feng and Bruce D. Jones
|
WeE02
Room: Gauss - l 301
|
Numerical simulations of granular materials using DEM
A.A. Bandeira, T.I. Zohdi
Sensitivity analysis of Immersed Boundary Method simulations of fluid flow in dense polydisperse random grain packings
C.S. Knight, M.H.. Abdol Azis, C. O‘Sullivan, B. van Wachem, D. Dini
Ejecting properties of a bucket elevator
O.A. Averkova, I.N. Logachev, K.I. Logachev, O.N. Zaytsev
Cross-flow of air through sealed elevator enclosures
O. Averkova, K. Logachev, I. Logachev, O. Zaytsev
|
27/9/17 17:00 - 19:00
Discrete Element Methods III
|
WeE06
Room: Kirchhoff - VII 004
|
Energy balance in a particle system
A. Mayrhofer, A. Hager, C. Kloss
Accurate modelling of the elastic and non linear behaviour of cohesive materials with the DEM
M.A. Celigueta, S. Latorre, F. Arrufat, E. Oñate
Implementation and verification of an algorithm for deformable discrete particles in the YADE DEM software
M. Haustein, A. Gladkyy, R. Schwarze
Investigation of Mass Discharge Rate and Segregation from Hopper by Discrete Element Method
R. Kumar, C. M. Patel, A. K. Jana, S. R. Gopireddy
Texture and stress transmission in binary granular composites: Comparison between simulations and existing experiments
P. Jongchansitto, I. Preechawuttipong
|
27/9/17 17:00 - 19:00
IS - Micro-macro: From Discrete Particles to Continuum Models of Granular Mechanics I FUNDAMENTALS OF THE COLLISIONAL STATE
Invited Session organized by Stefan Luding, Vanessa Magnanimo, Ken Kamrin and Deepak Tunuguntla
|
WeE01
Room: Newton - l 201
|
Well-posed continuum equations for granular flow with compressibility and μ(I)-rheology
T. Barker, D.G. Schaeffer, M. Shearer, J.M.N.T. Gray
Macroscopically identical granular systems with different number of particles
N. Rivas, S. Luding, D. van der Meer
Anomalous self-diffusion in a granular gas near the shearing instability
M.J. Ruiz-Montero, J.J. Brey
Kinetic equation for a confined quasi-two-dimesnional gas of hard spheres. The elastic and inelastic cases
J.J. Brey
|
27/9/17 17:00 - 19:00
Geomechanics III
|
WeE05
Room: Bernoulli - VII 003
|
A study on parameter uncertainties in rockfall simulation using discrete element method
H. Kanno, N. Uehara, I. Tachibana, S. Moriguchi, K. Terada, Y. Otake
Numerical modelling with discrete elements of rockfall protection systems
J. Irazábal, F. Salazar, M.A. Celigueta, S. Latorre, E. Oñate
Comparison of two DEM strategies for modelling cortical meshes
F. Gabrieli, A. Pol, K. Thoeni
Pore scale modelling in porous media: Diffusion-transport coupled to 3D Stokes equation at high resolution
L. Hume, P. Poncet
Soil disturbance during flat rigid dilatometer test using discrete element method
J. Butlanska, M. Arroyo
|
27/9/17 17:00 - 19:00
Lattice-Boltzmann-Method (LBM)
|
WeE08
Room: Lagrange - I 342
|
Thermal Lattice Boltzmann simulation of diffusion / forced convection using a double MRT Model
B. Kravets, H. Kruggel-Emden
On the use of Lattice Boltzmann method for simulating peristaltic flow of particle-laden Bingham fluids in a closed cavity
Z. Poursharifi, K. Sadeghy
Gray-scale lattice Botzmann methods - An attempt to bridge multiple length scales
G.G. Pereira, M.B. Clennell
|
28/9/17 09:00 - 10:30
Plenary Lectures III
|
ThMP
Room: Auditorium - VII 201
|
Large Scale Particle Modelling of Industrial and Biophysical Applications
P. Cleary
Massively parallel non-smooth granular dynamics and its coupling with Lattice-Boltzmann Methods
U. Rüde
|
28/9/17 11:00 - 13:00
IS - Granular Plasticity I
Invited Session organized by Francois Nicot and Felix Darve
|
ThM02
Room: Gauss - l 301
|
Micromechanics of normal hydroerosion processes
A.F. Rotunno, F. Froiio, C. Callari, A. Guidobaldi
Keynote talk: Internal structure evolution and particle-scale deformation mechanism of 2D simulated and experimental granular assemblies
X. Li, Q. Yuan, Z. Li, Y-H. Wang
Micro origin of granular plasticity: On the stabilizing role played by free particles.
A. Wautier, S. Bonelli, F. Nicot
Shear band forming with respect to spatial heterogeneity evolution
J. Liu, F. Nicot, W. Zhou, G. Ma
Instabilities of a sand layer subjected to an ascending water flow by a 2D coupled Discrete Element - Lattice Boltzmann hydromechanical model
M. Mansouri, M.S. El Youssou, F. Nicot
|
28/9/17 11:00 - 13:30
Granular Materials and Structures
|
Thm05
Room: Bernoulli - VII 003
|
MPM simulations of granular column collapse with a new constitutive model for the solid-fluid transition
I. Redaelli, F. Ceccato, C.G. di Prisco, P. Simonini
Discrete element modelling of granular column collapse tests with industrial applications
J. Torres-Serra, D.R. Tunuguntla, I.F.C. Denissen, A. Rodríguez-Ferran, E. Romero
Material parameter characterization of multicellular granules as crash absorber with application in ship building
C. Woitzik, M.A. Chaudry, P. Wriggers, A. Düster
Computational modelling of granular materials during confined compression with application in ship building
M.A. Chaudry, C. Woitzik, A. Düster, P. Wriggers
Numerical model of granular materials partially cemented by bacterial calcite
E. Kashizadeh, A. Mukherjee, A. Tordesillas
|
28/9/17 11:00 - 13:00
Discrete Element Methods IV
|
ThM07
Room: Germain - VII 005
|
Numerical and experimental investigation of transport and separation of complex shaped particles in an optical belt sorter using a DEM-CFD approach and comparison with experiments
C. Pieper, G. Maier, F. Pfaff, H. Kruggel-Emden, R. Gruna, B. Noack, S. Wirtz, V. Scherer, T. Längle, U.D. Hanebeck
Film formations of aggregates due to lateral capillary forces
M. Doran, P. Dastoor, M. Sciffer, R. Moreno-Atanasio
Distinct element simulation of inter-particle coating variability in a rotary drum coater
M. Pasha, M. Ghadiri, A. Zheng, P. M. Piccione
|
28/9/17 11:00 - 13:00
Multiphase and Particulate Flows I
|
ThM06
Room: Kirchhoff - VII 004
|
The impact of coupling on fluid-particle interactions in a turbulent channel flow
D.A. Rupp, D.O. Njobuenwu, M. Fairweather
On the effect of static and dynamic particle size distribution on flow turbulence modulation
D.O. Njobuenwu, M. Fairweather
Particle concentration and stokes number effects in multi-phase turbulent channel flows
L. Mortimer, M. Fairweather, D.O. Njobuenwu
Solid-gas flow case studies using simulation with coupled DEM-CFD
L. Kostetzer, L. C. de Almeida
Investigation of block-like movement in cohesive and non-cohesive spouted bed operations.
A. Vila, T. Lichtenegger, S. Puttinger, S. Pirker
CFD-DEM modeling of layer inversion phenomenon in solid-liquid fluidized beds
E. Abbaszadeh Molaei, Z. Zhou, A.B. Yu
|
28/9/17 11:00 - 13:00
IS - Fracture and Fragmentation with DEM I
Invited Session organized by Ferenc Kun and Falk Wittel
|
ThM03
Room: Euler - l 401
|
Discrete element simulation of concrete fracture using polygonal elements
B. Beckmann, M. Curbach
VGCM3D - A 3D rigid particle model for rock fracture following the Voronoi tessellation of the grain structure: Formulation and validation
M. Candeias, N. Monteiro Azevedo, M.L. Braga Farinha
Coupling of X-ray tomography and DEM for fracture simulation
D. Roussel, P. Parant, A. Lichtner, D. Jauffrès, J. Villanova, S. Picart, R.K. Bordia, Ch. Martin
Brazilian test - A microscopic point of view on tensile fracture generation
P. Klejment, W. Debski
Fragmentation and shear band formation by slow compression of brittle porous media
F. Kun, G. Pal, Z. Janosi, I. G. Main
|
28/9/17 11:00 - 13:00
IS - Micro-macro: From Discrete Particles to Continuum Models of Granular Mechanics II RHEOLOGY AND CONSTITUTIVE MODELING
Invited Session organized by Stefan Luding, Vanessa Magnanimo, Ken Kamrin and Deepak Tunuguntla
|
ThM01
Room: Newton - l 201
|
Granular Friction: from the building of the pyramids to the anatomy of the individual contacts at the nanoscale
D. Bonn
Granular rheology from first principles
M. Sperl
Relaxation processes after instantaneous shear rate reversal in a dense granular flow
E. Rojas, R. Soto, E. Clement, M. Trulsson, B. Andreotti
Role of softness and cohesion in wet granular flows
S. Roy, T. Weinhart, S. Luding
Discrete element method analysis of a state-parameter based constitutive model
X. Huang, C. O‘Sullivan, K. Hanley, F. Kwok
|
28/9/17 11:00 - 13:00
Meshless Methods I
|
ThM04
Room: Leibniz - VII 002
|
An accurate and stable multiphase MPS method with corrective matrix
G.T. Duan, S. Koshizuka, A. Yamaji, B. Chen
Algebraic Multigrid for the finite pointset method
B. Metsch, F. Nick
Hydrodynamic loads simulation for 3D bluff bodies by using the vortex loops based modification of the vortex particle method
G.A. Shcheglov, S.A. Dergachev
Efficient semi-analytical integration of vortex sheet influence in 3D vortex method
I.K. Marchevsky, G.A. Shcheglov
High-order numerical scheme for vortex sheet approximation in vortex methods for 2D flow simulation
K.S. Kuzmina, I.K. Marchevsky
|
28/9/17 14:00 - 16:00
IS - Micro-macro: From Discrete Particles to Continuum Models of Granular Mechanics III WALLS, PARTICLES AND CONTACTS, GEOPHYSICAL APPLICATIONS, ETC.
Invited Session organized by Stefan Luding, Vanessa Magnanimo, Ken Kamrin and Deepak Tunuguntla
|
ThA01
Room: Newton - l 201
|
Granular flow in confined geometries: Jamming, clogging, and instability
K. Okumura
From ball to blob: Multiple contact mechanics in soft particle packings
J. Dijksman, N. Brodu, R.P. Behringer
Rheology and effective wall friction in wall-bounded dense granular flows
R. Artoni, P. Richard
Wave propagation in granular materials: Role of cohesive
K. Huang
Discrete to continuum fields in bidisperse segregating granular mixtures
A. Thornton, C.R. Windows-Yule, D.R. Tunuguntla, T. Weinhart
|
28/9/17 14:00 - 16:00
IS - Granular Plasticity II
Invited Session organized by Francois Nicot and Felix Darve
|
ThA02
Room: Gauss - l 301
|
3D multiscale modelling of strain localization: using a micromechanically- based model
H. Xiong, F. Nicot, Z. Yin
Sub-particle scale plasticity in granular materials: Yielding of asperities
M. Otsubo, C. O‘Sullivan
On strain-deformation-fabric relationships for granular materials
N.P. Kruyt, L. Rothenburg
|
28/9/17 14:00 - 16:00
IS - Fracture and Fragmentation with DEM II
Invited Session organized by Ferenc Kun and Falk Wittel
|
ThA03
Room: Euler - l 401
|
Does shape matter? FEMDEM estimations of strength and post failure behaviour of catalyst supports
A. Farsi, J. Xiang, J.P. Latham, M. Calsson, E.H. Stitt, M. Marigo
DEM study on the role of thermal mismatch in multi-phase particle fragmentation
F.K. Wittel, H.A. Carmona, H.J. Herrmann
The evolution of fragment shapes in repeated sub-critical impact
G. Pál, G. Domokos, F. Kun
Discrete Particle Methods for Simulating Hypervelocity Impact Phenomena, Failure and Fragmentation
Martin O. Steinhauser
|
28/9/17 14:00 - 16:00
Meshless Methods II
|
ThA04
Room: Leibniz - VII 002
|
Explicit moving particle simulation method for milk crown and water drip
M. Yokoyama, Y. Seta, G. Yagawa
Investigation of enhanced polygon wall boundary model in PNU-MPS method
S.M. Chung, S.J. Ji, H.S. Shin, J.C. Park, S.M. Jeong, K.S. Kim
Accuracy comparison of different approaches for vortex sheet discretization on the airfoil in vortex particles method
K.S. Kuzmina, I.K. Marchesky, D. Milani, E.P. Ryatina
|
28/9/17 14:00 - 16:00
Multiphase and Particulate Flows II
|
ThA06
Room: Kirchhoff - VII 004
|
Numerical analysis of debris-flow interaction with open barriers
M. Marchelli, A. Leonardi, M. Pirulli
An EMMS based solid stress model for MP-PIC method
Y. Jiang, F. Li, W. Ge, W. Wang, J. Li
CFD-DEM modelling on complex particle-fluid flow with fluid-structure interaction
Y. He, A. Bayly, A. Hassanpour, M. Fairweather, F. Muller
Flow pattern and free surface deformation caused by coupling effect of ambient airflow and thermocapillary convection
R. Liang
Modelling heterogeneous catalysis in open-cell porous foam structures with particle based simulation methods
S. Mühlbauer, S. Strobl, T. Pöschel
Fluid-solid transition in unsteady shearing flows
D. Vescovi, D. Berzi, C. di Prisco
|
28/9/17 14:00 - 16:00
Discrete Element Methods V
|
ThA07
Room: Germain - VII 005
|
Direct determination of granular pressure in liquid fluidized beds using a DEM-based simulation approach
H. Abbasfard, G. Evans, R. Moreno-Atanasio
Acoustic wave probing of a sheared granular layer during stick-slip
L. Lemrich, P. Johnson, R. Guyer, X. Jia, J. Carmeliet
Mechanical behavior of boundary layer in discrete models based on Voronoi tessellation
J. Eliáš
Implementing particle-based methods with Aboria
M. Robinson, M. Bruna
Grinding Media Dynamics for an Attritor Mill - DEM Investigation
D. Daraio, H.E Stitt, M. Marigo, A. Alexiadis, A. Ingram
|
28/9/17 14:00 - 16:00
Smoothed Particle Hydrodynamics (SPH) I
|
ThA05
Room: Bernoulli - VII 003
|
A Smoothed-Particle-Hydrodynamics simulation approach combining consistent kernel gradients with variable resolution schemes
M. Leonardi, J.M. Domínguez, T. Rung
Recent developments in modelling self-compacting concrete flow using smooth particle hydrodynamics method
S. Kulasegaram, B.L. Karihaloo
An SPH model for prediction of oil slick diameter in the gravity-inertial spreading phase
C.A.D. Fraga Filho
Numerical simulation of the sedimentation of an elliptic particle under external electric field using ISPH
N. Tofighi, A. Suleman, M. Yildiz
|
28/9/17 16:30 - 18:30
Forming Processes II
|
ThE04
Room: Leibniz - VII 002
|
Enhancement of the spreading process in additive manufacturing through the spreader optimisation
S. Haeri
Numerical and experimental study of the powder bed characteristics in the recoated bed of the additive manufacturing process
D.S. Nasato, M. Heinl, T. Hausotte, T. Pöschel
Initial stage sintering of polymer particles – modelling size-, temperature- and time- dependent contacts
T. Weinhart, R. Fuchs, M. Ye, S. Luding, H.-J. Butt, M. Kappl
Simulation of pouring process of aluminium alloy by smoothed particle hydrodynamics with oxide film model
T. Suwa, M. Kazama, Y. Maeda
Multiscale model of sintering: Diffusion and plastic flow
B.W. Kabore, B. Peters
Convergence analysis of the Affine Particle-In-Cell method and its application to the simulation of extrusion processes
J.L. Sandoval M., G.C. Ganzenmüller
|
28/9/17 16:30 - 18:30
Multiphase and Particulate Flows III
|
ThE06
Room: Kirchhoff - VII 004
|
Modelling the viscosity of nanoparticulate suspensions via coupled CFD-DEM simulations
Benedikt Finke, Arno Kwade, Carsten Schilde
A CFD–DEM approach coupled with heat transfer for the melting process of a packed of particles
M. Baniasadi, B. Peters
An hybrid multiscale model for immersed granular flows
M. Constant, F. Dubois, J. Lambrechts, V. Legat
Application of eXtended Discrete Element method for multiphase flow in packed bed reactors including heat transfer
M. Baniasadi, B. Peters
Discrete Multi-Physics: A particle-based computational method coupling CG-MD, SPH and DEM
A. Alexiadis
|
28/9/17 16:30 - 18:30
IS - Micro-macro: From Discrete Particles to Continuum Models of Granular Mechanics IV INCLINE, SLOPES, NON-SPHERICAL,…
Invited Session organized by Stefan Luding, Vanessa Magnanimo, Ken Kamrin and Deepak Tunuguntla
|
ThE01
Room: Newton - l 201
|
Bulbous head formation in bidispersed shallow granular flows over inclined planes
I.F.C. Denissen, T. Weinhart, S. Luding, A.R. Thornton
Retrogressive failure of a layer of granular material on an inclined plane
A. Russell, N. Gray, C. Johnson, S. Viroulet
Rheology of non-spherical down inclined planes
R.C. Hidalgo, T. Weinhart
Stresses and orientational order in shearing flows of granular liquid crystals
D. Berzi, N. Thai-Quang, Y. Guo, J. Curtis
DEM studies of non-spherical particle and flexible fiber flows: From microscale properties to macroscale behavior
Y. Guo, J.S. Curtis
|
28/9/17 16:30 - 18:30
Industrial Applications II
|
ThE07
Room: Germain - VII 005
|
Evaluation of a new dispersion technique for measuring triboelectric charging of particles
U. Zafar, M. Ali, F. Alfano, M. Ghadiri
Using non-smooth multi-domain dynamics to improve the safety on haul roads in surface mining
K. Thoeni, M. Servin, A. Giacomini
Continuum forms and their applications in predicting dynamic properties of brick mortar systems
S. Supprasert , M. L. L. Wijerathne, M. Hori, J. Chen
Coupled particle methods for the simulation of single-lip deep-hole drilling processes
P. Eberhard, D. Schnabel
Acoustic analysis of a simplified oil pan using a coupled FE-SPH approach
S. Koch, S. Duczek, F. Duvigneau, U. Gabbert, E. Woschke
|
28/9/17 16:30 - 18:30
Smoothed Particle Hydrodynamics (SPH) II
|
The05
Room: Bernoulli - VII 003
|
Scaling laws for implicit viscosities in smoothed particle hydrodynamics
C. Bierwisch, P. Polfer
Simulation of bubble-particle attachment using smoothed particle hydrodynamics
J. Je, J. Kwon, H. Cho
Coupling of finite-volume-method and incompressible smoothed particle hydrodynamics method for multiphase flow
C.A. Walter, M. Hirschler, U. Nieken
Investigation of procedures required for modelling of wet sieving using the coupled DEM-SPH method
D. Markauskas, F. Elskamp, H. Kruggel-Emden
An analysis of surface crack propagation with smoothed particle hydrodynamics method
K. Tazoe, H. Tanaka, M. Oka, G. Yagawa
|
28/9/17 16:30 - 18:30
Multi-physics Problems
|
ThE02
Room: Gauss - l 301
|
Modelling ice accretion due to freezing precipitation using a discrete morphogenetic approach
K. Szilder, E.P. Lozowski
Reaction-diffusion study for non-linear reaction systems using stochastic rotation dynamics
A. Sengar, J.A.M. Kuipers, R.A. van Santen, J.T. Padding
Modelling of Chemical Reactions in Metallurgical Processes
M. E. Kinaci, T. Lichtenegger, S. Schneiderbauer
Comparison of particle-resolved direct numerical simulation and 1D modelling of catalytic reactions in a cylindrical particle bed
A. Singhal, S. Cloete, R. Quinta-Ferreira, S. Amini
|
28/9/17 16:30 - 18:30
High Performance Computing
|
ThE03
Room: Euler - l 401
|
A language and development environment for parallel particle methods
S. Karol, T. Nett, P. Incardona, N. Khouzami, J. Castrillon, I.F. Sbalzarini
Parallelizing XDEM: Load-balancing policies and efficiency, a study
A. Rousset, X. Besseron, B. Peters
Mobility analysis using highly parallelized DEM and SPH
J. Carrillo, C. Goodin, J. Osorio
Optimized communication scheme for massively parallel simulations of polydisperse particle systems with large size ratios
S. Eibl, T. Preclik, U. Rüde
Simulating convex polyhedral particles utilizing the discrete element method on GPU
E. Siegmann, J. Khinast, G. Haase
fastDEM: A method for faster DEM simulations of granular media
C. Kloss, A. Aigner, A. Mayrhofer, C. Goniva
|
|
|
|
|
|