Monday, June 30th 11:30 - 12:30
Computational Methods for Generalized Continua I
Minisymposium organized by Richard Regueiro, Krishna Garikipati, Carlo Sansour, Paul Steinmann, Harm Askes and Jerzy Pamin
|
MS028
Room: EXC1.2
|
Generalized Electro-Mechanical Coupling with Straing Gradients and Meshfree Computations
Carlo Sansour, S. Skatulla, A. Arunachalakasi
|
Monday, June 30th 11:30 - 12:30
Inverse Problems I
Minisymposium organized by Bojan Guzina and Marc Bonnet
|
MS102
Room: CAS1.8
|
A Posteriori Initial Imperfection Identification in Shell Buckling Problems
Christopher Stull, Wilkins Aquino, Christopher Earls
|
Monday, June 30th 11:30 - 12:30
Length Scale Effects in Dynamic Failure of Materials I
Minisymposium organized by Shailendra Joshi, J.F. Molinari and K.T. Ramesh
|
MS112
Room: CAS3.1
|
A Strain Gradient Crystal Plasticity Model for the Length Scale Dependence of Free-Standing Thin Films
Isa Erturk, Boudewijn van Schaik, Hans van Dommelen, Marc Geers
|
Monday, June 30th 14:00 - 16:00
Mathematical Analysis of Generalized Finite Element Method II
Minisymposium organized by Uday Banerjee and Mark Alexander Schweitzer
|
MS088
Room: EXC1.1
|
Local Approximation Error for Generalized FEM for Problems with Discontinuous Coefficients
Ivo Babuska, Robert Lipton, Michael Stuebner
|
Tuesday, July 1st 10:30 - 12:30
Numerical Modeling in Reinforced Concrete and Its Validation I
Minisymposium organized by Rena C. Yu, Giulio Ventura, Gonzalo Ruiz and Jacinto R. Carmona
|
MS200
Room: CAS3.6
|
Different Collapse Modes in RC Beams: A Unified Fracture Mechanics Approach to Interpret Experimental Transitions
Alberto Carpinteri, Jacinto R. Carmona, Giulio Ventura
|
Tuesday, July 1st 14:00 - 16:00
Computational Contact Mechanics V
Minisymposium organized by Peter Wriggers, Tod A. Laursen and Giorgio Zavarise
|
MS168
Room: CAS1.2
|
Segment-to-Segment Contact Smoothing Method for Finite Deformation
Manuel Tur, Javier Fuenmayor, Peter Wriggers
|
Tuesday, July 1st 14:00 - 16:00
Inverse Problems V
Minisymposium organized by Bojan Guzina and Marc Bonnet
|
MS102
Room: CAS1.8
|
Sensitivity to Measured Data in Corrosion Detection Problem
Antonio Bilotta, Emilio Turco
|
Tuesday, July 1st 16:30 - 18:30
Immersed Boundary and Immersed Interface Methods I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
Direct Numerical Simulation of the Physiological Flow through a Bileaflet Mechanical Heart Valve
Marco D. de Tullio, Roberto Verzicco
|
Tuesday, July 1st 16:30 - 18:30
Computational Procedures and Models for Quasi-brittle Materials III
Minisymposium organized by Anthony Jefferson and Günter Hofstetter
|
MS114
Room: CAS3.10
|
Robust Anisotropic Visco-Damage Modeling for Impact Applications
Rodrigue Desmorat, Marion Chambart, Fabrice Gatuingt, Didier Combescure, Daniel Guilbaud
|
Tuesday, July 1st 16:30 - 18:30
Virtual Fracture Testing of Composite Materials and Structures IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Javier LLorca and Brian Cox
|
MS154
Room: CAS3.1
|
Superposition of Softening Laws to Account for Multiple Toughening Mechanisms
Carlos Dávila, Pedro Camanho, Albert Turon
Simulation until Failure of a Stiffened Panel with Progressive Damage and Delamination
Albert Turon, Joan Andreu Mayugo Majó, Pere Maimi, Norbert Blanco, Pedro Ponces Camanho, Josep Costa
On the Evaluation of the Young’s Modulus for a Laminated Periodic Composite Structure based on Auxetic Materials
Stefania Donescu, Veturia Chiroiu, Ana Maria Mitu
|
Wednesday, July 2nd 10:30 - 12:30
Minisymposium in the Honor of Michel Bernadou‘s 65th Birthday II
Minisymposium organized by John Cagnol and Roland Glowinski
|
MS073
Room: EXC1.2
|
Nitsches Method for General Boundary Conditions
Mika Juntunen, Rolf Stenberg
|
Wednesday, July 2nd 10:30 - 12:30
STS13: Advanced Methods for Aerospace Structures
|
STS13
Room: EXC2.2
|
General Modeling of the Behaviour of Carbon-Nanotubes
Maria Morandi Cecchi, M. Venturin
|
Wednesday, July 2nd 10:30 - 12:30
Immersed Boundary and Immersed Interface Methods II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
An Immersed Boundary Method for the RANS Equations using Adaptive Wall Functions
Marco D. de Tullio, Pietro De Palma, Giuseppe Pascazio, Maurizio Sciancalepore, Michele Napolitano
|
Wednesday, July 2nd 10:30 - 12:30
Computational Modelling of Locomotor Systems I
Minisymposium organized by Markus Böl, Stefanie Reese and Bob Svendsen
|
MS208
Room: PGL
|
The effect of Walking Speed on Muscle Function
Richard Neptune, Kotaro Sasaki, Steven Kautz
|
Wednesday, July 2nd 10:30 - 12:30
High-performance Computing in Computational Mechanics I
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
Toward Scalable Adaptive Mantle Convection Simulation on Petascale Supercomputers
George Biros, Carsten Burstedde, Omar Ghattas, Michael Gurnis, Georg Stadler, Eh Tan, Tiankai Tu, Lucas Wilcox, Shijie Zhong
|
Wednesday, July 2nd 14:00 - 16:00
Computational Methods in Composite Materials and Structures II
Minisymposium organized by Anastasia Muliana, Rami Haj-Ali and Marcin Kaminski
|
MS119
Room: CAS3.1
|
A Numerical Study of Mechanical Behaviour of Multilayer Composites under Depth-Sensing Indentation
Nataliya Sakharova, José Valdemar Fernandes, Jorge Antunes, Marta Cristina Oliveira
|
Wednesday, July 2nd 14:00 - 16:00
Uncertainty Modeling and Quantification in Computational Mechanics VIII
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Sand Transport in Surface Waters: An Uncertainty Analysis
André Fortunato, Lígia Pinto, Paula Freire, Xavier Bertin, Anabela Oliveira
|
Wednesday, July 2nd 14:00 - 16:00
Mechanics of Tires and Pavements: Material and Computational Modeling II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Michael Kaliske and Markus Oeser
|
MS182
Room: CAS1.5
|
Continuum Micromechanics based Upscaling of Viscoelastic Properties of Bituminous Mixtures
Elisabeth Aigner, Roman Lackner, Michael Wistuba
|
Wednesday, July 2nd 14:00 - 16:00
High-performance Computing in Computational Mechanics II
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
A Hybrid Finite Volume/Element Method for Low and High Reynolds Number Incompressible Flow
Shuangzhang Tu, Shahrouz Aliabadi
|
Wednesday, July 2nd 14:00 - 16:00
Multiple-Scale Physics and Computation I
|
TS323
Room: CAS3.4
|
Multiscale Numerical Modeling of Regular Open-Cell Cellular Structures with Elastic Filler Material
Lovre Krstulovic-Opara, Stefan Loehnert, Matej Vesenjak, Dana Mueller-Hoeppe, Peter Wriggers, Petar Marendic
|
Wednesday, July 2nd 14:00 - 16:00
Immersed Boundary and Immersed Interface Methods III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
A Parallel RANS Solver based upon the Immersed Boundary and Domain Decomposition Methods
Marco D. de Tullio, Gianluca Rossiello, Pietro De Palma, Giuseppe Pascazio, Michele Napolitano
|
Wednesday, July 2nd 16:30 - 18:30
Contact Mechanics : Modelling, Analysis and Applications V
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Mircea Sofonea, José R. Fernandez and Georgios E. Stavroulakis
|
MS039
Room: CAS0.1
|
Accurate Stress Recovery in Contact Problems
Juan José Ródenas, Manuel Tur, Javier Fuenmayor, Ana Vercher
|
Wednesday, July 2nd 16:30 - 18:30
Computations of Fluid Flows at the Solid-Fluid Interfaces I
Minisymposium organized by Dimitrios Papavassiliou and Lloyd Lee
|
MS203
Room: CAS2.2
|
Numerical Simulation on Nanotube
Mathieu Colin, Thierry Colin, Kevin Santugini
Numerical Modeling of Fluid-Biofilm Interaction
Ashkan Safari, Alojz Ivankovic, Zeljko Tukovic
|
Thursday, July 3rd 10:30 - 12:30
Optimization and Control I
|
TS325
Room: CAS1.3
|
Path Optimization of Thrust Producing Flapping Airfoils using Response Surface Methodology
Mustafa Kaya, Ismail Hakki Tuncer
|
Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Delamination Study of Z-Pinned Composite Laminates
Tiziana Turetta, Alessia Cottone, Giuseppe Giambanco
|
Thursday, July 3rd 10:30 - 12:30
Iterative Solvers for the Incompressible Navier Stokes Equations I
Minisymposium organized by Michele Benzi and Kees Vuik
|
MS052
Room: CAS2.5
|
A Projection Method and Solvers for Incompressible Viscous Flow with Coriolis Force
Maxim Olshanskii, Andriy Sokolov, Stefan Turek
|
Thursday, July 3rd 10:30 - 12:30
Dynamics of Nonlinear Structures with Contact Interfaces I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Evgeny Petrov and Kai Willner
|
MS142
Room: CAS1.6
|
Multi-Scale Dynamic Method for Structures with Contact Interfaces
Pierre-Alain Boucard, David Odièvre, Fabrice Gatuingt
|
Thursday, July 3rd 10:30 - 12:30
Computational Modelling of Locomotor Systems IV
Minisymposium organized by Markus Böl, Stefanie Reese and Bob Svendsen
|
MS208
Room: PGL
|
Mammalian Muscle Contraction and Performance Examined by Temperature Perturbation
K.W. Ranatunga
|
Thursday, July 3rd 10:30 - 12:30
STS08: New Technologies in Aero-Engines
|
STS08
Room: EXC2.1
|
Selected Aerothermal CFD Analyses of High-Pressure Turbine Topics within the AITEB-2 Project
Erik Janke, Howard Hodson, B. Facchini, I. Popovic, K. Lehmann, C. Georgakis, L. Pons, E. Lutum, F. Wallin, Bill Dawes, F. Favaretto, L. Toni
|
Thursday, July 3rd 10:30 - 12:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices IV
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Discrete Transformation - Dislocation Model
Jingyi Shi, Sergio Turteltaub, Erik Van der Giessen
|
Thursday, July 3rd 14:00 - 16:00
Computational Fluid Dynamics IV
|
TS303
Room: CAS3.9
|
The Rayleigh-Benard Problem in Parallelepiped Enclosures with Soret Effect
Daniel Soler, Ainhoa Iturraspe
|
Thursday, July 3rd 14:00 - 16:00
STS09: Simulation and Validation of the Combustion of Advanced Aero-Engines
|
STS09
Room: EXC2.1
|
Low Emissions Combustors Development for New Aero-Engines Core Applications
Salvatore Colantuoni, Sebastian Bake, Jean-Pierre Badet
|
Thursday, July 3rd 14:00 - 16:00
Adaptive Methods for Material Processing II
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Solution of Free Surface Flows using Enriched Pressure Shape Functions
Florin Ilinca, Jean-Francois Hetu
|
Thursday, July 3rd 14:00 - 16:00
Inverse Problems for Parameter Identification III
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
High Amplitude Forced Oscillations of a Modern Bell tower in Rome
Marco Lepidi, Vincenzo Gattulli, Dora Foti
|
Thursday, July 3rd 14:00 - 16:00
Meshfree and Generalized/Extended Finite Element Methods II
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Space-Time Meshfree Collocation Method by Interpolating Moving Least Squares
Hennadiy Netuzhylov, Andreas Zilian
|
Thursday, July 3rd 16:30 - 18:30
Computational Mathematics and Numerical Methods III
|
TS319
Room: CAS3.3
|
Numerical Solution of Non-Stationary Axisymmetric Hele-Shaw Problems for Electrochemical Machining
Olga Zinnatullina, Vladimir Zhitnikov
|
Thursday, July 3rd 16:30 - 18:30
Adaptive Methods for Material Processing III
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Start-Up of Flow through a 4:1:4 Constriction in a Tube using the Rouse-CCR Tube Model for Linear Entangled Polymers with Finite Extensibility
Kalonji Kabanemi, Jean-Francois Hetu, Martin Audet
|
Thursday, July 3rd 16:30 - 18:30
Computational Fluid Dynamics V
|
TS303
Room: CAS3.9
|
A New Petrov-Galerkin Finite Element Method for Stabilizing Reaction-Diffusion Equations
Florin Ilinca, Jean-François Hetu
|
Thursday, July 3rd 16:30 - 18:30
Advanced Materials: Computational Analysis of Properties and Performance II
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
|
MS209
Room: CAS3.1
|
Multiscale and Multyphysics Modeling of Filled Composites, Design Validation of the Models and Uncertainty in the Modelling
Sergey Lurie, Dmitrii Volkov-Bogorodskii, Natalia Tuchkova, Vladimir Zubov
|
Friday, July 4th 10:30 - 12:30
Numerical Modelling of Hydrodynamic Geophysical Flows II
Minisymposium organized by Tomas Chacon Rebollo and Edie Miglio
|
MS062
Room: CAS2.6
|
Asymptotic Derivation of Section Averaged Models for River Hydraulics: A Second Order Approximation with Generalized Friction Term
Astrid Decoene, Luca Bonaventura, Edie Miglio, Fausto Saleri
|
Friday, July 4th 10:30 - 12:30
Adaptive Methods for Material Processing IV
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
An Adaptive Remeshing Strategy for Viscoelastic Fluid Flow Simulations
André Fortin, Robert Guénette, Abdoulaye Kane, Jean-François Hetu
|
Friday, July 4th 10:30 - 12:30
Computational Materials Mechanics III
|
TS318
Room: CAS3.8
|
Constitutive Modeling of Unbonded Flexible Riser under Tension
Ali Bahtui, Hamid Bahai, Giulio Alfano
|
Friday, July 4th 10:30 - 12:30
Computational Modeling in Cardiovascular Mechanics III
Minisymposium organized by Gerhard A. Holzapfel, Jay D. Humphrey, Charles A. Taylor and David A. Vorp
|
MS099
Room: CIN1.1
|
The Role of Material Anisotropy in Abdominal Aortic Aneurysm Wall Mechanics
José F. Rodriguez, Giampaolo Martufi, Manuel Doblaré, Ender A. Finol
|
Friday, July 4th 14:00 - 16:00
Computational Materials Mechanics IV
|
TS318
Room: CAS3.8
|
Effect of Neighbour Heterogeneity on Local Stresses in Two Phase Stochastic Composite
Hay Azulay, Eli Altus
|
Friday, July 4th 14:00 - 16:00
Boundary Element Method I
|
TS300
Room: CIN0.2
|
Boundary Element Formulation for Fractured Reinforced Bodies
Edson Denner Leonel, Osvaldo Manzoli, Wilson Sergio Venturini
|
Friday, July 4th 14:00 - 16:00
Second Level Preconditioners for Krylov Subspace Methods I
Minisymposium organized by Reinhard Nabben and Kees Vuik
|
MS048
Room: CAS2.4
|
Fast Algorithms for Nonlinear Systems of Equations and Optimization
Eric de Sturler
|
Friday, July 4th 14:00 - 16:00
Meshfree and Generalized/Extended Finite Element Methods V
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Partition of Unity Based Cohesive Crack Modeling in a Phase-Changing Medium
Thomas Hille, Sergio Turteltaub, Akke Suiker
|
Friday, July 4th 14:00 - 16:00
Theory and Applications of Discontinuous Galerkin Methods V
Minisymposium organized by Slimane Adjerid, Clint Dawson, Adrian Lew, Beatrice Riviere and Chi-Wang Shu
|
MS130
Room: CAS2.3
|
Comparison of Two Full-Wave Models for a Loudspeaker
Timo Lähivaara, Tomi Huttunen, Simo-Pekka Simonaho
|
Friday, July 4th 16:30 - 18:30
Industrial Applications III
|
TS316
Room: CAS1.6
|
Coupled Thermoelasticity of FG Thin Shells: Effect of Temperature Field Across the Thickness
Ali Bahtui, M. Reza Eslami
|
Friday, July 4th 16:30 - 18:30
Modelling and Optimisation for Coupled Multi-Physics Processes II
Minisymposium organized by Francois Bay and Mark Cross
|
MS059
Room: CAS1.7
|
Design of Thermal Properties for Maximum Penetration
Ivo Babuska, Robert Lipton, Michael Stuebner
|
Friday, July 4th 16:30 - 18:30
Topology Optimization in Civil and Structural Engineering V
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski
|
MS065
Room: CAS0.1
|
Inverse Homogenization and Optimal Design of Composite Structures for Strength and Stiffness
Robert Lipton, Michael Stuebner
|
