Monday, June 30th 11:30 - 12:30
Subgrid Scales, a-Posteriori Error Estimation and Adaptivity for Computational Mechanics I
Minisymposium organized by Guillermo Hauke and James R. Stewart
|
MS081
Room: CAS3.8
|
A-Posteriori Error Estimation for Linear Functionals of Solutions Computed with Stabilized Methods
Guillermo Hauke, Daniel Fuster
|
Monday, June 30th 11:30 - 12:30
Mathematical Analysis of Generalized Finite Element Method I
Minisymposium organized by Uday Banerjee and Mark Alexander Schweitzer
|
MS088
Room: EXC1.1
|
GFEM for Dirichlet Data with Low Regularity
Ivo Babuska, Victor Nistor, Nicolae Tarfulea
|
Monday, June 30th 14:00 - 16:00
Accuracy Assessment of the eXtended Finite Element Method: Adaptivity, Comparison with Competing Methods, Industrialisation II
Minisymposium organized by Stephane Bordas, Marc Duflot and Pierre-Olivier Bouchard
|
MS141
Room: EXC1.3
|
Comparison of Recently Developed Recovery-Type Discretization Error Estimators for the Extended Finite Element Method
Juan José Ródenas, Marc Duflot, Stephane Bordas, Eugenio Giner, Octavio Andrés González Estrada, Francisco Javier Fuenmayor
|
Monday, June 30th 14:00 - 16:00
Subgrid Scales, a-Posteriori Error Estimation and Adaptivity for Computational Mechanics II
Minisymposium organized by Guillermo Hauke and James R. Stewart
|
MS081
Room: CAS3.8
|
On Grid and Scheme Resolution for Supersonic Jet Acoustics
Taku Nonomura, Kozo Fujii
|
Tuesday, July 1st 10:30 - 12:30
Meshfree Multiscale Methods Mini-Symposium I
Minisymposium organized by Michael Griebel, Antonio Huerta, Wing Kam Liu and Marc Alexander Schweitzer
|
MS089
Room: CAS3.4
|
Two-Scale Optimal Design of Aeration Filters using Homogenization Method for Solid-Fluid Mixtures and X-FE Discretizations
Tomohiro Sawada, Shogo Nakasumi, Manabu Fukushima, Yu-ichi Yoshizawa, Akira Tezuka
|
Tuesday, July 1st 10:30 - 12:30
Challenges in Mechanics for Nuclear Plants I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pierre Verpeaux and Stéphane Andrieux
|
MS123
Room: CAS1.5
|
Fully Automated 3d-Crack Propagation Analyses based on Tetrahedral Finite Elements
Hiroshi Okada, Hiroshi Kawai, Yasuyuki Kanda, Toshimitsu Fujisawa, Genki Yagawa
|
Tuesday, July 1st 10:30 - 12:30
Numerical Modeling in Reinforced Concrete and Its Validation I
Minisymposium organized by Rena C. Yu, Giulio Ventura, Gonzalo Ruiz and Jacinto R. Carmona
|
MS200
Room: CAS3.6
|
Fracture Toughness Variation induced by Stress Corrosion Cracking of Prestressing Steels
Javier Sanchez, Carmen Andrade, Jose Fullea
|
Tuesday, July 1st 10:30 - 12:30
Numerical and Computational Aspects of Interface Problems II
Minisymposium organized by Frederic Gibou and Christian Ratsch
|
MS050
Room: CAS3.8
|
Coupled Composition-Deformation Phase-Field Method for Lipid Membranes with Asymmetric Leaflet Compositions
Chloe M. Funkhouser, Francisco J. Solis, Katsuyo Thornton
|
Tuesday, July 1st 14:00 - 16:00
Computational Contact Mechanics V
Minisymposium organized by Peter Wriggers, Tod A. Laursen and Giorgio Zavarise
|
MS168
Room: CAS1.2
|
Segment-to-Segment Contact Smoothing Method for Finite Deformation
Manuel Tur, Javier Fuenmayor, Peter Wriggers
|
Tuesday, July 1st 16:30 - 18:30
Numerical Methods for Gas-Liquid Two-Phase Flow I
Minisymposium organized by Byeong Rog SHIN and Takeo Kajishima
|
MS085
Room: CAS2.5
|
Accurate Prediction of Transitional Flows among Gas, Liquid and Supercritical Fluids
Takashi Furusawa, Satoru Yamamoto
|
Tuesday, July 1st 16:30 - 18:30
Multiscale Modelling of Material Behaviour II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Chris Pearce and Eduardo de Souza Neto
|
MS124
Room: EXC1.3
|
Fast Fourier Methods Applied to Perturbation-based Homogenization Relations
David Fullwood, Surya Kalidindi, Brent Adams
|
Tuesday, July 1st 16:30 - 18:30
Multiobjective Optimization in Industrial Applications II
Minisymposium organized by Jussi Hakanen and Elina Madetoja
|
MS176
Room: CAS1.3
|
Comparative Study of Data Mining Methods for Aerodynamic Multiobjective Optimizations
Tomoaki Tatsukawa, Akira Oyama, Kozo Fujii
Multiobjective Optimization Approach for Model Parameter Extraction in Gliding Motility Assays
Florin Fulga, Cristinca Fulga, Dan V. Nicolau
|
Tuesday, July 1st 16:30 - 18:30
Numerical Techniques for the Modelling of Material Failure in Solids VI
Minisymposium organized by Xavier Oliver and Francisco Armero
|
MS237
Room: CAS3.7
|
Moving Finite Element Analyses for Dynamic Nonlinear Fracture of Voided Materials
Takehiro Fujimoto, Toshihisa Nishioka
|
Wednesday, July 2nd 10:30 - 12:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices I
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Atomistic Simulations of Incipient Plasticity in Stepped Surfaces
Oscar Rodriguez de la Fuente
|
Wednesday, July 2nd 10:30 - 12:30
Minisymposium in Honor of Prof. O.C. Zienkiewicz I
Minisymposium organized by Robert Taylor and Perumal Nithiarasu
|
MS053
Room: EXC1.1
|
Accurate upper Bound of the Discretization Error in XFEM through a Recovery-Based Technique and Error Estimation of the Recovered Solution
Juan José Ródenas, Pedro Díez, Octavio Andrés González Estrada, Javier Fuenmayor
|
Wednesday, July 2nd 10:30 - 12:30
Minisymposium on Performance-Based Structural Design Optimization I
Minisymposium organized by Nikos Lagaros , Christopher Foley and Hongbing Fang
|
MS047
Room: CAS1.6
|
Low Cost Adaptive Remeshing Strategies for the Solution of Structural Shape Optimization Problems using Hybrid (Evolutionary-Gradient) Methods
Gabriel Bugeda, Juan José Ródenas, Francisco José Fuenmayor, Eugenio Oñate
|
Wednesday, July 2nd 10:30 - 12:30
Immersed Boundary and Immersed Interface Methods II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
Convergence Acceleration Method for Computational Fluid Dynamics using Immersed Boundary Cartesian Grid Method
Takahiro Fukushige, Toshihiro Kamatsuchi, Toshiyuki Arima, Seiji Fujino
|
Wednesday, July 2nd 14:00 - 16:00
Mechanics of Tires and Pavements: Material and Computational Modeling II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Michael Kaliske and Markus Oeser
|
MS182
Room: CAS1.5
|
A Hyperelastic-Visco-Elasto-Plastic-Damage Model for Rubber-Like Solids
Junji Yoshida, Masaki Fujikawa, Takaya Kobayashi
|
Wednesday, July 2nd 16:30 - 18:30
Contact Mechanics : Modelling, Analysis and Applications V
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Mircea Sofonea, José R. Fernandez and Georgios E. Stavroulakis
|
MS039
Room: CAS0.1
|
Accurate Stress Recovery in Contact Problems
Juan José Ródenas, Manuel Tur, Javier Fuenmayor, Ana Vercher
|
Wednesday, July 2nd 16:30 - 18:30
Extended / Generalized Finite Element Method III
Minisymposium organized by Ted Belytschko, Elisa Budyn, John Dolbow, Nicolas Moës and Giulio Ventura
|
MS037
Room: EXC1.3
|
Improved SIF Extraction using different Domain Integrals in FEM and X-FEM
Eugenio Giner, Francisco Javier Fuenmayor, Ana Vercher, José Enrique Tarancón
|
Wednesday, July 2nd 16:30 - 18:30
Environment II
|
TS310
Room: CAS1.4
|
Study of Cascade Impacter Pollen Sampling Device
Hideki Aoi, Kunio Funami, Hiroyuki Miyamoto, Yue Zhao, Yorito Ishikawa
|
Wednesday, July 2nd 16:30 - 18:30
Computational Fluid Dynamics II
|
TS303
Room: CAS3.9
|
Body-Fitted Cartesian Grid Method for Complex High Reynolds Number Flows
Keiichiro Fujimoto, Kozo Fujii, Z. J. Wang
|
Wednesday, July 2nd 16:30 - 18:30
Transition Modelling II
Minisymposium organized by Erik Dick, Mark Savill, Witold Elsner and Franco Magagnato
|
MS192
Room: CAS2.3
|
A Transport Intermittency Model for Supersonic/Hypersonic Boundary Layer Transition
Song Fu, Liang Wang
|
Wednesday, July 2nd 16:30 - 18:30
Fracture Mechanics III
|
TS313
Room: CAS3.10
|
Evaluation of Interference with Hole and Surface Crack using the VNA-FEM Alternating Method
Toshihisa Nishioka, Yusuke Hirooka, Youngjun Won, Guangqin Zhou, Takehiro Fujimoto
|
Wednesday, July 2nd 16:30 - 18:30
Inverse Problems for Parameter Identification I
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
GPS Based Structural Identification: a Feasibility Study
Fabio Casciati, Clemente Fuggini
|
Thursday, July 3rd 10:30 - 12:30
Computations of Fluid Flows at the Solid-Fluid Interfaces II
Minisymposium organized by Dimitrios Papavassiliou and Lloyd Lee
|
MS203
Room: CAS2.2
|
Unsteady Computational Analysis of Supersonic Underexpanded Jet Impinging on an Inclined Flat Plate
Yoshinori Goto, Kansai McIlroy, Kozo Fujii
|
Thursday, July 3rd 14:00 - 16:00
Optimization and Control II
|
TS325
Room: CAS1.3
|
A Novel Implementation of Arora´s Algorithm for the Euclidean TSP
Barbara Martina Rodeker, María Virginia Cifuentes, Liliana Favre
An Application of Traveling-Salesman Models to Shot Sequence Generation for Scan Lithography
Yuji Shinano, Nobuo Inui, Youzou Fukagawa, Noburu Takakura
|
Thursday, July 3rd 16:30 - 18:30
Meshfree and Generalized/Extended Finite Element Methods III
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
On Fracture Mechanics Analysis using B-spline Wavelet Galerkin Method
Satoyuki Tanaka, Hiroshi Okada, Shigenobu Okazawa , Masahiko Fujikubo
|
Friday, July 4th 14:00 - 16:00
Structural Stability II
Minisymposium organized by Herbert Mang and Zsolt Gaspar
|
MS083
Room: EXC2.2
|
The Critical Left and Right Eigenvectors extracted from the LDU-Decomposed Non-Symmetric Jacobian Matrix
Fumio Fujii, Yuki Yamakawa, Hirohisa Noguchi
|
