Tuesday, July 1st 10:30 - 12:30
Numerical and Computational Aspects of Interface Problems II
Minisymposium organized by Frederic Gibou and Christian Ratsch
|
MS050
Room: CAS3.8
|
A Robust, Fully Adaptive Hybrid Method for Two-Phase Flows
Héctor D. Ceniceros , Alexandre M. Roma, Aristeu da Silveira-Neto, Millena M. Villar
|
Tuesday, July 1st 10:30 - 12:30
Parallel Computing I
|
TS326
Room: CAS2.2
|
Parallel Processing applied to an Upper Bound Formulation for 3d Limit Analysis Computations
Mário Vicente da Silva, Armando Antão
|
Tuesday, July 1st 16:30 - 18:30
Advances in Computational Mechanics in Honor of Professor Maier IV
Minisymposium organized by Eugenio Onate, Claudia Comi and Giorgio Novati
|
MS155
Room: EXC1.1
|
Control the Thermal Response of Thin-Walled Structures using the Robust Design Method
Lijia Fan, Zhihai Xiang, Mingde Xue, Zhangzhi Cen
|
Wednesday, July 2nd 10:30 - 12:30
Inverse Problems: Recent Advances in Methodology and Techniques II
Minisymposium organized by Barbara Kaltenbacher and Roland Potthast
|
MS054
Room: CAS1.8
|
Damage Identification for Bridges based on Multi-type Sensors
Yiqian Li, Masheng Zhou, Zhihai Xiang, Zhangzhi Cen
|
Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Ductile Failure of Heterogeneous Materials: A Cohesive-Volumetric Approach Coupling Analytical and Numerical Homogenization Models
Yann Monerie, Frédéric Perales, Pierre-Guy Vincent
|
Thursday, July 3rd 16:30 - 18:30
Inverse Problems for Parameter Identification IV
Minisymposium organized by George Dulikravich, Giulio Maier and Helcio Orlande
|
MS167
Room: CAS1.2
|
The Optimal Design of Space Structures considering the Criterion of Thermal Flutter
Lijia Fan, Zhihai Xiang, Mingde Xue, Zhangzhi Cen
|
Thursday, July 3rd 16:30 - 18:30
Optimization and Control III
|
TS325
Room: CAS1.3
|
Global Optimization of Laminates
Paolo Vannucci, Mohamed Reza Ahmadian, Angela Vincenti
Optimal Orthotropic Material Orientation by the use of Polar Representation
Angela Vincenti, Boris Desmorat
|
