Monday, June 30th 11:30 - 12:30
Uncertainty Modeling and Quantification in Computational Mechanics I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Polynomial-Chaos applied to Lorenz’s Model for Quantification of Growth of Initial Uncertainties
Colin Shen, Thomas Evans, Steven Finette
|
Monday, June 30th 11:30 - 12:30
Computational Structural Mechanics I
|
TS328
Room: CAS3.2
|
A Quadratic Triangular Finite Element for the Nonlinear Analysis of Thin Shells
Edgard Almeida Neto, Paulo Pimenta, Eduardo Campello
|
Monday, June 30th 14:00 - 16:00
Computational Geomechanics Minisymposium II
Minisymposium organized by Boris Jeremic, Claudio Tamagnini, Richard Regueiro, Ronaldo Borja, Fusao Oka and Stein Sture
|
MS029
Room: PGL
|
Bounds and Adaptivity for 3D Limit Analysis
Jose Munoz, Javier Bonet, Antonio Huerta, Jaime Peraire
|
Monday, June 30th 14:00 - 16:00
Multiscale Modeling and Uncertainty Quantification of Heterogeneous Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Manolis Papadrakakis, George Stefanou, X. Frank Xu and Nicholas Zabaras
|
MS150
Room: CAS3.10
|
On Stochastic Homogenization of Fiber Reinforced Composites exhibiting a Randomly Fluctuating Volume Fraction
Johann Guilleminot, Christian Soize, Djimedo Kondo, Christophe Binetruy
|
Monday, June 30th 16:30 - 18:30
Numerical Dynamical Systems Analysis of Nonlinear Climate Models I
Minisymposium organized by Fred Wubs, Kurt Lust and Henk Dijkstra
|
MS184
Room: CAS1.4
|
Computation of Invariant Manifolds in Large-Scale Dissipative Systems
Juan Sánchez, Marta Net, Carles Simó
|
Monday, June 30th 16:30 - 18:30
Uncertainty Modeling and Quantification in Computational Mechanics III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Representing Acoustic Field Uncertainty in Ocean Waveguides
Steven Finette, Yu Yu Khine
|
Monday, June 30th 16:30 - 18:30
Inverse Problems III
Minisymposium organized by Bojan Guzina and Marc Bonnet
|
MS102
Room: CAS1.8
|
A Non-iterative FEM-based Cavity Identification Method using Topological Sensitivity for 2-D and 3-D Time-domain Elastodynamics
Cédric Bellis, Marc Bonnet
Shape-Material Sensitivity Framework for Elastic-Wave Identification of Penetrable Defects
Bojan B. Guzina, Marc Bonnet
|
Tuesday, July 1st 10:30 - 12:30
Advanced Numerical Approaches for Complex Multi-phase Flows IV
Minisymposium organized by Takashi Yabe, Nobuatsu Tanaka and Feng Xiao
|
MS140
Room: CAS2.6
|
Performance of the Water/Glycerine Separation by Hydrocyclone
Fabiana P.M. Farias, Severino R. de Farias Neto, Antonio G.B. de Lima, Cidronia J.O. Buriti
|
Tuesday, July 1st 10:30 - 12:30
Computational Contact Mechanics IV
Minisymposium organized by Peter Wriggers, Tod A. Laursen and Giorgio Zavarise
|
MS168
Room: CAS1.2
|
Frictional Contact of Elastomer Materials on Rough Rigid Surfaces
Peter Wriggers, Jana Nettingsmeier
|
Tuesday, July 1st 10:30 - 12:30
Numerical and Computational Aspects of Interface Problems II
Minisymposium organized by Frederic Gibou and Christian Ratsch
|
MS050
Room: CAS3.8
|
A Robust, Fully Adaptive Hybrid Method for Two-Phase Flows
Héctor D. Ceniceros , Alexandre M. Roma, Aristeu da Silveira-Neto, Millena M. Villar
|
Tuesday, July 1st 14:00 - 16:00
Computational Methods in Nonlinear Dynamics V
Minisymposium organized by Stefano Lenci and Marian Wiercigroch
|
MS038
Room: CAS2.5
|
Stable Manifold Computations in a Non-Smooth Dynamical System
Ugo Galvanetto
|
Tuesday, July 1st 14:00 - 16:00
Computational Bioimaging and Visualization II
Minisymposium organized by João Tavares, Renato Natal Jorge, Thomas J. R. Hughes and Chandrajit Bajaj
|
MS016
Room: CIN2.1
|
Automatic IMT Measurement for Carotid Ultrasound Images
Anton Vernet, Honorio Pallas, Blai Coll
|
Tuesday, July 1st 14:00 - 16:00
Multiscale Modelling of Material Behaviour I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Chris Pearce and Eduardo de Souza Neto
|
MS124
Room: EXC1.3
|
Topological Derivative in Multi-Scale Linear Elasticity Models
Sebastián Giusti, Antonio André Novotny, Eduardo Alberto de Souza Neto, Raul Feijoo
Topological Derivative in Multi-Scale Heat Conduction Models
Sebastián Giusti, Antonio André Novotny, Eduardo Alberto de Souza Neto, Raul Feijoo
|
Tuesday, July 1st 16:30 - 18:30
Advances in Computational Modeling for Environmental Engineering III
Minisymposium organized by Agustí Pérez-Foguet and Rafael Montenegro
|
MS198
Room: CAS1.4
|
Computational Modelling of Reactive Multiphase Flows in Hydrometallurgical Processes
Chris Bennett, Diane Mcbride, Mark Cross, Jim Gebhardt
|
Tuesday, July 1st 16:30 - 18:30
A Background to Several Computational Difficulties: The Non-Smooth Evolution of Mechanical Systems Due to Discontinuities of the Velocities In Time or In Space I
Minisymposium organized by Eric Dimnet and Frederico Tochetti
|
MS143
Room: CAS3.6
|
Non-Smooth Evolution of a Mechanical System using the A-CD² Method
Stefano Dal Pont, Eric Dimnet
Evolution of a Fluid with Collisions and Unilateral Contact: The P-ALE Approach
Eric Dimnet, Raul Gormaz
|
Wednesday, July 2nd 10:30 - 12:30
Multiscale Mechanics in Durability of Materials
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roman Lackner and Josef Eberhardsteiner
|
MS082
Room: CAS3.4
|
Computational Homogenization of Microstructural Damage in Metals
Erica Coenen, Varvara Kouznetsova, Marc Geers
|
Wednesday, July 2nd 10:30 - 12:30
Extended / Generalized Finite Element Method I
Minisymposium organized by Ted Belytschko, Elisa Budyn, John Dolbow, Nicolas Moës and Giulio Ventura
|
MS037
Room: EXC1.3
|
An Extended Finite Element Method for Modelling Micro and Nano Inclusions with Imperfect Interfaces
Julien Yvonnet, Charles Toulemonde, Qi-Chang He
|
Wednesday, July 2nd 10:30 - 12:30
Computational Methods in Multibody Dynamics Simulation VII
Minisymposium organized by Dan Negrut, Carlo Bottasso and Rudranarayan M. Mukherjee
|
MS019
Room: CAS1.7
|
Flexible Multibody Dynamics with Linear Deformations: Overvieweing the Basics
Jorge Ambrosio, Maria Augusta Neto
|
Wednesday, July 2nd 10:30 - 12:30
Constitutive Stability and Fracture: Models and Applications II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pedro Areias and José César de Sá
|
MS064
Room: CAS3.8
|
An Implicit Energetic Approach of 3D Crack growth under Fatigue Loading and Residual Stresses
Vincent Chiaruttini, Gwenael Edeline, Frédéric Feyel, Marc Bonnet
|
Wednesday, July 2nd 10:30 - 12:30
Advanced Computational Methods for Wave Motion IV
Minisymposium organized by Dan Givoli and Geza Seriani
|
MS036
Room: CAS3.9
|
A Multi-Level Fast Multipole Multi-Region Method for 3D Seismic Response of Alluvial Basins
Stephanie Chaillat, Marc Bonnet, Jean-Francois Semblat
|
Wednesday, July 2nd 14:00 - 16:00
Image-Based Computational Modelling of Materials I
Minisymposium organized by M.A. Siddiq Qidwai and Andrew B. Geltmacher
|
MS210
Room: CAS3.7
|
Rubber Filled with Carbon Black from the Nanoscopic Structure to the Macroscopic Behaviour
Aurélie Jean, Dominique Jeulin, Sabine Cantournet, Samuel Forest, Franck N‘Guyen
|
Wednesday, July 2nd 14:00 - 16:00
Environment I
|
TS310
Room: CAS1.4
|
Discontinuous Galerkin Methods for Morphodynamic Modelling
Pablo Tassi, Sander Rhebergen, Carlos Vionnet, Onno Bokhove
|
Wednesday, July 2nd 14:00 - 16:00
Minisymposium on Performance-Based Structural Design Optimization II
Minisymposium organized by Nikos Lagaros , Christopher Foley and Hongbing Fang
|
MS047
Room: CAS1.6
|
Performance-Based Optimization of a Welded Open Cross Section Runway Beam According to EC3 and EC1
Demetrios T. Venetsanos, Christopher G. Provatidis
Performance-Based Optimization of the Welded Box of a Single Girder Overhead Travelling Crane According to EC3 and EC1
Demetrios T. Venetsanos, Efrossini-Aikaterini T. Magoula, Christopher G. Provatidis
|
Wednesday, July 2nd 16:30 - 18:30
Computations of Fluid Flows at the Solid-Fluid Interfaces I
Minisymposium organized by Dimitrios Papavassiliou and Lloyd Lee
|
MS203
Room: CAS2.2
|
An Iterative Process for the Implicit Evaluation of Forces in the Immersed Boundary Method, using the Virtual Physical Method
João Marcelo Vedovoto, Felipe Pamplona Mariano, Aristeu Silveira-Neto
|
Wednesday, July 2nd 16:30 - 18:30
Uncertainty Modeling and Quantification in Computational Mechanics IX
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Roger Ghanem, Christian Soize and Gerhart Schueller
|
MS021
Room: CIN.SalaVolpi
|
Reliability Analysis of the Buckling of Imperfect Shells based on the Karhunen-Loève Expansion
Claudine Noirfalise, Jean-Marc Bourinet, Michel Fogli, Bruno Cochelin
|
Wednesday, July 2nd 16:30 - 18:30
Immersed Boundary and Immersed Interface Methods IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Pietro De Palma, Michele Napolitano, Giuseppe Pascazio and Roberto Verzicco
|
MS175
Room: CAS2.6
|
Immersed Boundary Method applied to Simplified Drilling Problems
Elie Luis Padilla, André Martins, Aristeu Silveira-Neto
|
Wednesday, July 2nd 16:30 - 18:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices III
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
A Microscale Model of Martensitic Transformation with Incorporation of Interaction Between Plasticity and Transformation
Alexei Balmachnov, Varvara Kouznetsova, Marc Geers
|
Thursday, July 3rd 09:30 - 10:00
Semi-Plenary Lecture 10
|
SP1
Room: CAS3.7
|
Two Step Taylor-Galerkin Solution of Lagrangian Explicit Dynamic Solid Mechanics
Javier Bonet, Antonio J. Gil
|
Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Computational Estimation of Macroscopic Constitutive Behavior in Composite Materials
Domenico Bruno, Fabrizio Greco, Paolo Lonetti, Paolo Nevone Blasi
|
Thursday, July 3rd 10:30 - 12:30
Computational Fluid Dynamics III
|
TS303
Room: CAS3.9
|
Numerical Study of Flow and Heat Transfer for Incompressible Flows Past Open Cavity
Youssef Stiriba, Xavier F. Grau, Josep A. Ferrè, Anton Vernet
|
Thursday, July 3rd 14:00 - 16:00
Adaptive Methods for Material Processing II
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Interface Capturing and Application to the Simulation of the Water Assisted Injection Molding Process
Walid Zerguine, Luisa Silva, Thierry Coupez, Hugues Digonnet
|
Thursday, July 3rd 14:00 - 16:00
Meshfree and Generalized/Extended Finite Element Methods II
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
Space-Time Meshfree Collocation Method by Interpolating Moving Least Squares
Hennadiy Netuzhylov, Andreas Zilian
|
Thursday, July 3rd 14:00 - 16:00
Damage and Interfacial Delamination Modelling in Composite Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco
|
MS103
Room: CAS3.10
|
Surface and Volume Damages
E. Bonetti, F. Freddi, M. Frémond
Analysis of Dynamic Interfacial Crack Growth in Fiber-Reinforced Composite Structures
Domenico Bruno, Fabrizio Greco, Paolo Lonetti, Paolo Nevone Blasi
|
Friday, July 4th 10:30 - 12:30
Adaptive Methods for Material Processing IV
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
An Adaptive Remeshing Strategy for Viscoelastic Fluid Flow Simulations
André Fortin, Robert Guénette, Abdoulaye Kane, Jean-François Hetu
|
Friday, July 4th 10:30 - 12:30
Advances in Boundary Element Methods VI
Minisymposium organized by Yijun Liu, Martin Schanz, Naoshi Nishimura, Zhenhan Yao, Marc Bonnet, Ernie Pan, Attilio Frangi and Mitch Denda
|
MS043
Room: CIN2.1
|
A New Semi-Analytical Method for the Construction of Auxiliary Fields in the Interaction Integrals of 3-D LEFM
Gwenael Edeline, Marc Bonnet, Vincent Chiaruttini
|
Friday, July 4th 14:00 - 16:00
Computational Fluid Dynamics VII
|
TS303
Room: CAS3.9
|
Heat Transfer Modeling Inside Industrial Furnaces
Elie Hachem, Hugues Digonnet, Elisabeth Massoni, Thierry Coupez
|
Friday, July 4th 14:00 - 16:00
Computational Materials Mechanics IV
|
TS318
Room: CAS3.8
|
Experimental Characterization and Numerical Modelling of the Non-Linear Mechanical Behaviour of Nomex Honeycomb Cores
Steven Marguet, Laurent Gornet, Patrick Rozycki
|
Friday, July 4th 16:30 - 18:30
Optimization and Inverse Engineering for Industrial Applications III
Minisymposium organized by Michele Chiumenti and Valentino Pediroda
|
MS106
Room: CAS1.8
|
A Genetic Algorithm Approach for the Detection of Corrosion in Large-Scale Structures
Giulia Deolmi, Fabio Marcuzzi, Silvia Poles, Sergio Marinetti
|
Friday, July 4th 16:30 - 18:30
Multiscale Methods in Computer Materials Science III
Minisymposium organized by Maciej Pietrzyk, Peter Hodgson and Tadeusz Burczynski
|
MS033
Room: CAS3.6
|
Multiscale Buckling Analysis of Heterogeneous Materials
Saeid Nezamabadi, Hamid Zahrouni, Michel Potier-Ferry, Julien Yvonnet
|
Friday, July 4th 16:30 - 18:30
Efficient Computational Methods for Coupled Problems III
Minisymposium organized by Harald van Brummelen and Tayfun Tezduyar
|
MS096
Room: CAS3.4
|
Heat and Moisture Transfer, Deformation and Stress Analysis during Drying of Ceramic Bricks
Daniel Avelino, Joselito da Silva, Severino Farias Neto, Antonio G.B. de Lima
|
