Monday, June 30th 14:00 - 16:00
Advances in Multiphysics Simulation and Experimental Testing of MEMS and NEMS II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Attilio Frangi, Narayan Aluru and Subrata Mukherjee
|
MS151
Room: CIN1.1
|
Multiphysics Modeling and Optimization of a Polymeric Thermal Micro-Actuator with an Embedded Skeleton
Gih-Keong Lau, Johanes F. L. Goosen, Fred van Keulen
|
Monday, June 30th 14:00 - 16:00
Minisymposium on Inverse Problems in Heat Transfer II
Minisymposium organized by Alain Kassab, Richard Bialecki and Eduardo Divo
|
MS074
Room: CAS2.1
|
Thermal Optimization of Polymer Injection Mould : Application of Conformal Cooling Design
Jacques Duysens, Didier Delaunay, V. Sobotka, David Garcia, Steve Langlois
|
Monday, June 30th 16:30 - 18:30
Computational Geomechanics Minisymposium III
Minisymposium organized by Boris Jeremic, Claudio Tamagnini, Richard Regueiro, Ronaldo Borja, Fusao Oka and Stein Sture
|
MS029
Room: PGL
|
Existence and Uniqueness of Solutions in Nonassociated Mohr-Coulomb Elastoplasticity
Johan Clausen, Kristian Krabbenhoft
|
Tuesday, July 1st 10:30 - 12:30
Biological Cells and Capsules IV
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Takuji Ishikawa , Dominique Barthes-Biesel , Petia Vlahovska and Takami Yamaguchi
|
MS194
Room: CIN0.1
|
Propulsion and Locomotion in Complex Fluids
Eric Lauga
|
Tuesday, July 1st 10:30 - 12:30
Composite Materials and Multiscale Modeling and Design in Medicine and Engineering I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Michel C. Delfour and Marc Thiriet
|
MS193
Room: CIN0.2
|
Active Catheters pPrototyping: Application for Neuroradiology
Emilie Marchandise, Laurent Royon, Patrice Flaud, Jérome Szewczyk
|
Tuesday, July 1st 16:30 - 18:30
STS11: Models and Tools for the Design of a Supersonic Transport Aircraft with Reduced Impact on the Environment
|
STS11
Room: EXC2.1
|
Sonic Boom Modeling: Aspects, Numerical Methods and Optimisation
Frédéric Alauzet, Alain Dervieux, Adrien Loseille, Youssef Mesri
|
Tuesday, July 1st 16:30 - 18:30
Multiobjective Optimization in Industrial Applications II
Minisymposium organized by Jussi Hakanen and Elina Madetoja
|
MS176
Room: CAS1.3
|
Multiobjective Optimization Approach for Model Parameter Extraction in Gliding Motility Assays
Florin Fulga, Cristinca Fulga, Dan V. Nicolau
|
Wednesday, July 2nd 10:30 - 12:30
Numerical Modeling and Simulation on Micro and Nanoscale Materials and Devices I
Minisymposium organized by Marisol Koslowski and Richard Lesar
|
MS170
Room: CIN1.1
|
Numerical Modeling of Nanostructures
Azeddine Benabbou, Houman Borouchaki, Patrick Laug, Jian Lu
|
Wednesday, July 2nd 10:30 - 12:30
High-performance Computing in Computational Mechanics I
Minisymposium organized by Shahrouz Aliabadi, Omar Ghattas, Robert B. Haber, Guillaume Houzeaux, Abani Patra and Mariano Vázquez
|
MS199
Room: CAS2.1
|
Harnessing the Power of Multi-Core Architectures in CFD by Coupling Multi-Threading Programming, Cache Misses Reduction Techniques with Multi-Scale Adaptivity
Adrien Loseille, Frédéric Alauzet, Paul-Louis George, Loic Maréchal, Éric Saltel
|
Wednesday, July 2nd 14:00 - 16:00
Advances in Computational Stochastic Mechanics II
Minisymposium organized by Vissarion Papadopoulos, Dimos Charmpis and Manolis Papadrakakis
|
MS125
Room: CAS3.3
|
A Probabilistic Approach for Modelling of Fracture in Die-Castings
Cato Dørum, Odd Sture Hopperstad, Torodd Berstad, Hans Ivar Laukli
|
Wednesday, July 2nd 14:00 - 16:00
Minisymposium on Performance-Based Structural Design Optimization II
Minisymposium organized by Nikos Lagaros , Christopher Foley and Hongbing Fang
|
MS047
Room: CAS1.6
|
Aeroelastic Analisys and Optimal Design of Axial Multistage Fans and Compressors
Michele Ferlauto
|
Wednesday, July 2nd 16:30 - 18:30
Computational Methods in Composite Materials and Structures III
Minisymposium organized by Anastasia Muliana, Rami Haj-Ali and Marcin Kaminski
|
MS119
Room: CAS3.1
|
Modelling of Structure Evolution of Filled Elastomers under Uniaxial Elongation
Bernd Lauke, Ilya Morozov
|
Thursday, July 3rd 10:30 - 12:30
Meshfree and Generalized/Extended Finite Element Methods I
Minisymposium organized by J. S. Chen, Ivo Babuska, Ted Belytschko, C. Armando Duarte, Vitor Leitão, Wing Kam Liu, Hirohisa Noguchi and Angelo Simone
|
MS107
Room: EXC1.2
|
On Finite Element Methods with Embedded Discontinuities for Evolving Interface Problems
John Dolbow, Isaac Harari, Jessica Sanders, Tod Laursen
|
Thursday, July 3rd 14:00 - 16:00
Adaptive Methods for Material Processing II
Minisymposium organized by Thierry Coupez, Jean-François Hetu and José César de Sa
|
MS122
Room: CIN.SalaVolpi
|
Adaptive Finite Elements with Large Aspect Ratio: Theory and Practice
Marco Picasso, Jacek Narski, Yves Bourgault, Frédéric Alauzet, Adrien Loseille
Mesh Adaptation applied to Unsteady Simulation of Bi-Fluid Flow with Level Set
Damien Guegan, Frédéric Alauzet, Olivier Allain, Alain Dervieux
|
Thursday, July 3rd 14:00 - 16:00
Advanced Materials: Computational Analysis of Properties and Performance I
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
|
MS209
Room: CAS3.1
|
Constitutive Equations for Dissipative Materials operating under Finite Deformations
Alexander Svistkov, Bernd Lauke, Gerd Heinrich
|
Thursday, July 3rd 14:00 - 16:00
Computational Fluid Dynamics IV
|
TS303
Room: CAS3.9
|
Stabilized Finite Element Method for Compressible-Incompressible Interface Flows
Marie Billaud, Gérard Gallice, Boniface Nkonga
|
Friday, July 4th 10:30 - 12:30
Adaptive Higher Order Variational Methods for Aerospace Applications II
Minisymposium organized by Norbert Kroll, Jaap van der Vegt and Remi Abgrall
|
MS057
Room: CAS2.4
|
Enhancing Accuracy and Convergence Order of High Order Methods with Adaptive Techniques
Frédéric Alauzet
|
Friday, July 4th 14:00 - 16:00
Topology Optimization in Civil and Structural Engineering IV
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski
|
MS065
Room: CAS0.1
|
Optimal Shape Design subject to Variational Inequalities
Michael Hintermüller, Antoine Laurain
|
