Home
  Introduction
  Committees
  Plenary Lectures
  Invited Sessions
  Submission of Contributions
  Registration
  Registration Fees
  Instructions for Authors
  Important Dates
  Secretariat
  Location
  Social Programme
  Accommodation
  Technical Programme
      Search
      All Sessions and Papers
  Proceedings NEW!
  E-book NEW!
  Supporting Organizations
 
  Download Brochure
  Download Poster

Number of visits: 160603



Tuesday, September 3


10:00 - 14:00
Registration

14:00 - 16:30
Opening Ceremony and Plenary Lectures I
TuMP
Room: Auditorium

History of computational elastoplasticity
E. Stein, J.S. Chen and M. Rüter

Phase-field modeling of ductile fracture
T.J.R. Hughes, M.J. Borden and C.M. Landis

Continuum approach to computational multi-scale modeling of material failure
J. Oliver, A.E. Huespe, M.A. Caicedo and J.A. Hernández

Computational electro-chemo-mechanics for solids deteriorating at multiple scales
K. Terada and S. Takase


16:30 - 17:00
Coffee-break

17:00 - 19:00
TECHNICAL SESSIONS
IS - Material Size-effects in Plasticity I
Invited Session organized by Viggo Tvergaard and Christian Niordson
TuE01
Room: Sala d’Actes

Issues in formulations of basic micron-scale plasticity for non-proportional loading
J.W. Hutchinson

Computational modeling of size effect in metallic glasses
T. Xiao, B. Klusemann and S. Bargmann

Failure strain predictions with size-effects of a two-phase composite material
B.N. Legarth

Interface dominated plastic flow described by strain gradient plasticity theory – Application to fine grained steels and thin films
T. Pardoen, C. Brugger and T.J. Massart

A numerical method for strain gradient crystal plasticity
C.F. Niordson

IS - Safety and Durability of Concrete Structures - SEDUREC
Invited Session organized by Carmen Andrade
TuE02
Room: VS208

New insights on the value of structural health monitoring
M. H. Faber

Models for reliability assessment of reinforced concrete structures in corrosive environments in conditions of a changing climate
D.V. Val and M.G. Stewart

A critical discussion on the usefulness and reliability of mathematical modelling for service life design of infrastructure
J. Gulikers

Validation of resistance models for corrosion-damaged concrete beams based on theory of plasticity
M. Prieto and P. Tanner

Monitoring of cover cracking due to reinforcement corrosion in a beam exposed to the atmosphere
C. Andrade, F. Pedrosa, F. Tavares and A.A. Torres-Acosta

Life-cycle of fatigue sensitive structures under uncertainty
D. Frangopol and M. Soliman

IS - Model Reduction in Materials, Processes and Structures
Invited Session organized by Francisco Chinesta, Elías Cueto, Pierre Ladevèze and Antonio Huerta
TuE03
Room: VS217

DEIM-based PGD for multi-parametric nonlinear model reduction
J.V. Aguado, F. Chinesta, A. Leygue, E. Cueto and A. Huerta

Toward the optimisation of the reactive resin transfer molding using the PGD method
E. Abisset-Chavanne, E. Cueto, A. Huerta and F.  Chinesta

Simulation based adaptative toolpath generation in milling processes
F. Poulhaon, M. Rauch, A. Leygue, J.Y. Hascoet and F. Chinesta

IS - Numerical Modelling of the Failure and Instabilities in Geomaterials I
Invited Session organized by Frédéric Dufour and Manuel Pastor
TuE04
Room: VS218

SPH propagation modelling of an earthflow from Southern Italy
L. Cascini, S. Cuomo, M. Pastor and M. Coppola

Improvement of irregular DTM for SPH modelling of flow-like landslides
S. Cuomo, M. Pastor, S. Vitale and L. Cascini

Modelling of the transition between solid state and fluid state of geomaterials: Application to landslides
F. Dufour, N. Prime and F. Darve

Elasto-visco-plastic model for granular materials under large strain rate conditions
I. Redaelli, C. di Prisco , D. Vescovi and D. Berzi

Modeling host rock deformation and fracture above magma chambers preceding caldera formation
P. Kabele, M. Somr and J. Zak

IS - Modeling of Ductile Fracture at Multiple Scales I
Invited Session organized by Pierre-Olivier Bouchard and Thomas Pardoen
TuE05
Room: VS219

Ductile damage in multi-phase materials: the effect of the microstructural morphology unravelled
T.W.J. de Geus, R.H.J. Peerlings and M.G.D. Geers

An adaptive multi-level model for multi-scale ductile fracture analysis in heterogeneous aluminum alloys
D. Paquet and S. Ghosh

Influence of loading conditions on ductile damage nucleation, growth and coalescence mechanisms
P-O. Bouchard, E. Roux and M. Bernacki

Localization of plastic flow leading to ductile failure: which comes first, the localization in a band or the coalescence of voids?
C. Tekoğlu, T. Pardoen and J.W.  Hutchinson

Modeling of ductile damage using numerical analyses on the micro-scale
M. Brünig, S. Gerke and V. Hagenbrock

IS - Computational Modeling in Biomechanics: From Micro-Structure to Macroscopic Response
Invited Session organized by Gerhard A. Holzapfel
TuE06
Room: VS213

Constitutive modeling of cross-linked actin gels including the influence of linker proteins and viscoelasticity
M.J. Unterberger, R.W. Ogden and G.A. Holzapfel

Modeling and experimental investigations of the stress-softening behavior of soft collagenous tissues
T. Schmidt, D. Balzani, A. Schriefl and G.A. Holzapfel

Incorporating three-dimensional residual stresses into patient-specific simulations: examples on abdominal aortic aneurysms
G.A. Holzapfel, D.M.  Pierce and T.E. Fastl

A porous media approach for foot biomechanics
G. Sciumè, A. Guiotto, Z. Sawacha, D.P. Boso, C. Cobelli and B.A. Schrefler

The influence of microscale simulation on blood coagulation model
A. Jakubowicz and M.  Pietrzyk

IS - Inelastic Response of Heterogeneous Media
Invited Session organized by Adnan Ibrahimbegovic and Hermann G. Matthies
TuE07
Room: VS214

A new homogenization technique to model mechanical mechanisms in materials with random network microstructures
C. Linder

Anisotropic viscodamage-viscoplastic consistency model with a parabolic cap for rocks
T. Saksala and A. Ibrahimbegovic

Uncertainty quantification methods for elastoplastic problems described by uncertain parameters
B.V. Rosic, H.G. Matthies, M. Živković and A. Ibrahimbegovic

A stochastic framework for multiscale strength prediction using adaptive discontinuity layout optimisation (ADLO)
S. Bauer and R. Lackner

FE²-Homogenization of micromorphic elasto-plastic materials
H. Clasen, C.B. Hirschberger, J. Korelc and P. Wriggers

IS - Energy-based Variational Approaches for Multiscale and Multiphysics Constitutive Modelling
Invited Session organized by Joern Mosler and Laurent Stainier
TuE08
Room: VS215

Low cycle fatigue in metals – A thermodynamically and variationally consistent constitutive model based on energy minimization
M. Canadija and J. Mosler

A variational approach to the formulation of thermomechanically coupled finite viscoelasticity problems with damage
A.E. Selke, L. Stainier and E.A. Fancello

Staggered schemes for strongly coupled thermoviscoelastic problems based on an energy-based variational formulation of thermomechanics
A.A. Ramabathiran and L. Stainier

On the thermodynamically and variationally consistent modeling of thermomechaically coupled plasticity theory
A. Bartels and J. Mosler

Energy-based variational modelling for adiabatic shear band structure
S. Su and L. Stainier

Advanced Computational Methods I TuE09
Room: VS216

A comparative study of continuation methods in non-linear elasto-plastic analysis
L.F. Paullo Muñoz and D. Roehl

A FEM-DEM technique for prediction multi-fracture in materials and structures
F. Zárate and E. Oñate

Assumed-strain finite element technique for accurate modelling of plasticity problems
E. Artioli, G. Castellazzi and P. Krysl

An efficient numerical method for shakedown analysis
A. Bilotta, L. Leonetti and G. Garcea

An analytical model for elasto-plastic buckling of columns
S. Jowhari Moghadam and B.A. Izzuddin

Industrial Applications TuE10
Room: VS206a

Numerical simulation of a crimped assembly mechanical strength
M. Petitprez and K. Mocellin

Numerical simulations of submerged and pressurised X65 steel pipes
M. Kristoffersen, F. Casadei, T. Børvik, M. Langseth, G. Solomos and O.S. Hopperstad

Piezoelectric FEM analysis of surface acoustic wave sensor
V. Kutis, G. Galik, J. Murin, I. Ryger, J. Paulech, J. Hrabovsky and T. Lalinsky

Stoichiometric simulation of nitriding and induced stresses
T. Inoue

Large deformation analysis of truss structures with combined isotropic/kinematic hardening
S-Y. Leu



19:00 - 20:30
Welcome Reception


Wednesday, September 4

09:00 - 10:30
Plenary Lectures II
WeMP
Room: Auditorium

Multiscale analyis applied to material modeling
P. Wriggers, E. Lehmann and S. Loehnert

The virtual chart concept in computational structural mechanics
P. Ladevèze

On path-following in the post-critical regime
T. Pohl, M. Bischoff and E. Ramm


10:30 - 11:00
Coffee-break

11:00 - 13:00
TECHNICAL SESSIONS
IS - Material Size-effects in Plasticity II
Invited Session organized by Viggo Tvergaard and Christian Niordson
WeM01
Room: Sala d’Actes

Mesh dependency of smeared-out non-linear composite finite element models of compressive failure mechanism in composite materials
L.P. Mikkelsen

Optimal scaling laws in ductile fracture
L. Fokoua, S. Conti and M. Ortiz

Discrete (MD) and continuum (DD) simulations of void growth in single crystals
O. Rodríguez, J. Segurado, H-J. Chang and J. LLorca

Thermomechanical study of nanovoid cavitation in aluminum
M.P. Ariza, M. Ponga and M. Ortiz

Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids
V. Tvergaard

IS - Computational Strategies for Metal Cutting & Forming Operations I
Invited Session organized by Miguel Vaz Jr.
WeM02
Room: VS208

Modelling of material cutting with a material microstructure-level (MML) model
D. Nelias, Y. Zhang and T. Mabrouki

A new method for inverse parameter identification for machining simulations using finite element simulations
M. Bäker and A. Shrot

A benchmark study on identification of inelastic parameters based on deep drawing processes using PSO – Nelder Mead hybrid approach
M. Vaz Jr., M.A. Luersen, P.A. Muñoz-Rojas, E. Bertoti and R.G. Trentin

The physical and numerical modeling of cold wire drawing process of biocompatible magnesium alloys
A. Milenin, P. Kustra and D.-J. Byrska-Wójcik

Numerical analysis of hot deep drawing of DIN 27MnCrB5 steel sheets under controlled stretching
M.H.F. Batalha and S.T. Button

Numerical and experimental analysis of cold forming of titanium alloy sheets
J. Adamus

IS - Advances in Constitutive Modelling of Metal Forming Processes across Different Lengthscales I
Invited Session organized by Ivaylo Vladimirov
WeM03
Room: VS217

Quasi-static mechanical behaviour of Ti-6Al-4V alloy at room temperature
V. Tuninetti, G. Gilles, O. Milis and A-M. Habraken

Finite element modeling for predicting slab edge defect on hot rolled ferritic stainless steel sheet
S. Kim, F. Barlat and M.G. Lee

Evaluation of the effect of friction and deformation heat on springback prediction of AHSS
J.Y. Lee, F. Barlat and M.G. Lee

Efficient FE strategies for springback prediction – material modelling and computational aspects
I.N. Vladimirov, M.P. Pietryga and S. Reese

IS - Numerical Modelling of the Failure and Instabilities in Geomaterials II
Invited Session organized by Frédéric Dufour and Manuel Pastor
WeM04
Room: VS218

Triaxial tests on frozen ground: formulation and modelling
F. Casini, A. Gens, S. Olivella and G. Viggiani

Transition processes in soil–fluid interaction problems modelled by the material point method
Z. Wieckowski and P. Vermeer

Boundary layer (shear band) in yield stress fluid flows in the plastic regime
P. Coussot

Static/flowing transition in granular flows over erodible beds
A. Mangeney, O. Roche, M. Farin, I. Ionescu, F. Bouchut and L. Tsimring

Mixed finite elements applied to slope stability problems
L. Benedetti, M. Cervera and M. Chiumenti

An elastoplastic model for unsaturated expansive soils based on shakedown concept
K. Li, H. Nowamooz, C. Chazallon and B. Migault

IS - Modeling of Ductile Fracture at Multiple Scales II
Invited Session organized by Pierre-Olivier Bouchard and Thomas Pardoen
WeM05
Room: VS219

Numerical implementation and application of a second-gradient model for ductile rupture of metals
J-B. Leblond and J-M. Bergheau

Crack initiation and propagation with a nonlocal gurson model: microscopic parameters and macroscopic challenges
G. Hütter, L. Zybell, T. Linse, U. Mühlich and M. Kuna

Effective flow surface of a porous material with two populations of voids: constitutive modeling and 3 dimensional full field numerical simulations
P. Suquet, P.G. Vincent, H. Moulinec and Y. Monerie

Influence of the microstructure on the fracture strain of 6xxx series aluminium alloys
A. Simar, K.L. Nielsen, F. Hannard, L. Lecarme and T. Pardoen

Concrete and Masonry Materials and Structures WeM06
Room: VS213

Modelling concrete visco-elasticity coupled with unconventional plasticity in 3D domains
V. Salomoni, K. Hashiguchi, R. Fincato and G. Xotta

Recent progress in microplane modelling of plain concrete
F.C. Caner and Z.P. Bažant

Micromechanical constitutive model for plain and fibre reinforced concrete
I. Mihai, T. Jefferson and P. Lyons

When limit state analysis fails: collapse of masonry structures
K. Bagi

Micro-modeling of stack bond masonry in compression using a plasticity law
A. Drougkas, P. Roca and C. Molins

C1 – continuous crack propagation for mixed-mode fracture problems
A.T. Slobbe, M.A.N. Hendriks and J.G. Rots

Contact and Impact Mechanics I WeM07
Room: VS214

Discontinuous numerical analysis refining element technique applied to dry–contact masonry arches
J.L. Pérez-Aparicio, R. Bravo and P. Ortiz

Isogeometric analysis applied to frictionless large deformation elastoplastic contact
K.M. Mathisen, K.M. Okstad, T. Kvamsdal and S.B. Raknes

An atomistic study on nano-scale friction mechanism using molecular dynamics simulation
T. Uehara

Numerical solution of perfect plastic problems with contact: part I – theory and numerical methods
M. Cermak, J. Haslinger and S. Sysala

Numerical solution of perfect plastic problems with contact: part II – numerical realization
M. Cermak, J. Haslinger and S. Sysala

Advanced Material Models I WeM08
Room: VS215

Calibration and implementation of a simple model with directional distortional hardening
J. Plesek, Z. Hruby, S. Parma, R. Marek, H.P. Feigenbaum and Y.F. Dafalias

A variational constitutive framework for the nonlinear viscoelastic response of a dielectric elastomer
K.A. Khan, H. Wafai and T. El Sayed

Simulation of sheet-titanium forming of welded blanks
P. Lacki

Calibration and validation of plastic high strain rate models for Alloy 718
T. Sjöberg, K.G. Sundin and M. Oldenburg

Modelling the temperature development during sheet-bulk-metal forming using material isomorphism
S. Zeller, S. Loehnert and P. Wriggers

Advanced Computational Methods II WeM09
Room: VS216

Mixed methods for isogeometric analysis of nearly incompressible materials
C. Kadapa, W. Dettmer and D. Peric

Homogenized model for herringbone bond masonry: Linear elastic and limit analysis
G. Milani

An implicit solving algorithm adapted to numerical identification for simple lattice discrete element models of quasi-brittle materials
M. Vassaux, B. Richard, F. Ragueneau, A. Millard and A. Delaplace

3D discrete element modeling of concrete: Study of the rolling resistance effects on the macroscopic constitutive behavior
A. Omar, P. Marin, S. Potapov and L. Daudeville

The interface subdomain method in domain decomposition problems
M. Cafiero, J.  Oliver and J.C. Cante

Damage, Fracture and Fatigue I WeM10
Room: VS206a

Stepwise advancing strategy for the simulation of fatigue problems
L. G. Barbu, S. Oller, X. Martinez and A.H. Barbat

Frictional interface crack-tip singular stress field in anisotropic composites
H-P. Chen

Mesh objective modeling crack via a local continuum damage using a semi-mixed formulation in explicit transient dynamic
N. Lafontaine, R. Rossi, M. Cervera, E. Oñate and M. Canet

Experimental characterization and comparison of planar and corrugated aluminum sheets
S. Msolli, C. Labergere, H. Badreddine and K. Saanouni

Mechanisms associated with damage tolerance in Ti alloys
S. Osovski, A. Srivastava, A. Needleman and J.C.  Williams

Analyses of strain localisation in HDPE butterfly specimen during biaxial tests using digital image correlation
K. Hachour, M. Aberkane and R. Ferhoum



13:00 - 14:00
Lunch

14:00 - 16:00
Plenary Lectures III
WeAP
Room: Auditorium

The modern era of mechanics: using genomes to understand materials
W.K. Liu*, Y. Li, M. Bessa, M.S. Greene, B.C. Abberton, J. Moore, J. Smith, J. Cao, W. Chen and S. Keten

The buckling sphere – Extension of a new concept for classification of loss of stability to elastoplasticity
H.A. Mang and X. Jia

The mechanics and biology of touch
D. Peric

Multi-scale plasticity models of concrete capable of providing size-effect, crack-spacing and opening
A. Ibrahimbegovic


16:00 - 16:30
Coffee-break

16:30 - 18:30
TECHNICAL SESSIONS
IS - Material Size-effects in Plasticity III
Invited Session organized by Viggo Tvergaard and Christian Niordson
WeE01
Room: Sala d’Actes

Latent hardening size effect in small-scale plasticity
L. Bardella, J. Segurado, A. Panteghini and J. Llorca

Higher-order gradient effects in plastically deformed small-sized single crystals
M. Kuroda

Modelling of time and scale dependent phenomena in two phase alloys with strain gradient crystal plasticity
İ Ertürk, J.A.W. Dommelen and M.G.D. Geers

A rate-dependent model of gradient-extended crystal plasticity for size-effects in magnesium
E. Husser and S. Bargmann

IS - Computational Strategies for Metal Cutting & Forming Operations II
Invited Session organized by Miguel Vaz Jr.
WeE02
Room: VS208

Bending and springback prediction method based on multi-scale finite element analyses for high bendability and low springback sheet generation
T. Honda, H. Kuramae, H. Morimoto, Y. Morita, Y. Nakamura, T. Ohata and E. Nakamachi

A Mechanical behaviour law for the simulation of the mushy zone in welding
H. Amin-El-Sayed, E. Feulvarch, F. Boitout, J-B. Leblond and J-M. Bergheau

Chaining of welding and finish turning simulations for austenitic stainless steel components
F. Valiorgue, A. Brosse, J. Rech, V. Robin, P. Gilles and J-M. Bergheau

Aluminium extrusion analysis by the finite volume method
J.D. Bressan, M.M. Martins and S.T. Button

Lead extrusion analysis by finite volume method
M.M. Martins, J.D. Bressan and S.T. Button

IS - Advances in Constitutive Modelling of Metal Forming Processes across Different Lengthscales II
Invited Session organized by Ivaylo Vladimirov
WeE03
Room: VS217

Combined quasi-static deep drawing and electromagnetic forming – new material modelling and numerical treatment
S. Reese, Y. Kiliclar and I.N.  Vladimirov

An efficient numerical algorithm for finite-strain viscoplasticity including kinematic and distortional hardening
A.V. Shutov, R. Landgraf and J. Ihlemann

On the implementation of advanced anisotropic models with mixed iso-nonlinear kinematic hardening using distinct algorithmic strategies
T. Grilo, R. Valente and R Alves de Sousa

Process metallurgy analyses of sheet rolling by thermal elastic plastic multi-scale finite element method
K. Ohyabu, T. Honda, H. Kuramae, H. Morimoto, H. Sakamoto, Y. Morita and E. Nakamachi

Material modelling and parameter identification for sheet-bulk metal forming
S. Schmaltz and K. Willner

IS - Multiscale Poro-micro Mechanics of Bio- and Geomaterials
Invited Session organized by Christian Hellmich and Bernhard Pichler
WeE04
Room: VS218

Bone mineralization as fluid-to-solid phase transformation in a closed thermodynamic system
C. Morin and C. Hellmich

How do microstructural properties govern the strength of cementitious materials? A multiscale approach based on gel-space ratio
B. Pichler, C. Hellmich, J. Eberhardsteiner, J. Wasserbauer, P. Termkhajorkit, R. Barbarulo and G.  Chanvillard

ITZ-induced crack onset in concrete: a micromechanics approach
M. Königsberger, B. Pichler and C. Hellmich

Simulation of damage and crack propagation in structural materials by means of a static version of peridynamics
U. Galvanetto, M. Zaccariotto and F. Luongo

Size-dependent plasticity of crystals and interfaces: Computational issues
S.Dj. Mesarovic and R. Baskaran

IS - Modeling of Ductile Fracture at Multiple Scales III
Invited Session organized by Pierre-Olivier Bouchard and Thomas Pardoen
WeE05
Room: VS219

Hot formability characterization and fracture locus determination of the CuZn40Pb2 brass alloy through tensile and torsion testing
S. Bruschi, A. Ghiotti and M. Novella

Molecular dynamics simulations of necking and fracture of fcc Fe nanowires
J.Y. Wu, S. Nagao, J. Y.  He and Z.L. Zhang

Bauschinger effect in thin metallic films by FEM simulations
K. Marandi, R. Vayrette, T. Pardoen, L. Duchêne and A-M. Habraken

Nanoscale Mechanism of Hydrogen Embrittlement
W. Curtin and J.  Song

Enhancement of fracture resistance by soft interlayers
O. Kolednik, J. Zechner, J. Predan and F.D. Fischer

Multiscale Material Problems I WeE06
Room: VS213

Multiscale modeling of a small punch test on nanostructured CP titanium
A. Ridruejo, J. Segurado, I. Sabirov and J. LLorca

On the application of high-performance model reduction techniques to homogenization of heterogeneous materials
J.A. Hernández, J. Oliver, A.E. Huespe, M.A. Caicedo and J.C. Cante

Discrete dislocation dynamics modeling of nanoscale polycrystalline materials
S.S. Quek, Z. Wu, A.T.  Lim, Y.W.  Zhang and D.J.  Srolovitz

Multiscale modelling of annealing of advanced high strength steel products by solution of diffusion equation in the periodic RVE
K. Bzowski, M. Pernach and M. Pietrzyk

A link between the phenomenological and physical modelling of transformation-induced plasticity
A.H. Sakhaei, K.M. Lim and P. Thamburaja

Construction of macroscale yield surfaces for ductile composites based on a virtual testing strategy
S. Asadi, A. Esmaeili, F. Larsson and K. Runesson

Forming Processes Simulations I WeE07
Room: VS214

Advanced modelling of the out-of-autoclave thermoplastics prepreg consolidation
Ch. Ghnatios and F. Chinesta

Fast simulation of a flat cross wedge rolling process
B.-A. Behrens and M. Dannenberg

Simulation of material consequences induced by FSW for a trigonal pin
J-C. Roux, E. Feulvarch and J-M. Bergheau

Modeling of high speed friction stir spot welding using a lagrangian finite element approach
M.P. Miles, U.  Karki, C.  Woodward and Y.  Hovanski

Experimental and numerical analysis of the flow behaviour of magnesium wrought Alloy AZ31 for deep drawing process at elevated temperatures
B.-A. Behrens, A. Bouguecha, T. Huinink, I. Peshekhodov, T. Matthias, J. Moritz and J. Schrödter

Calculation of mechanical and thermal influences during coiling of hot strip
V. Sattinger, A. Kainz, K. Schörkhuber, L. Aigner and K. Zeman

Advanced Material Models II WeE08
Room: VS215

Elastoplastic stress analysis of functionally graded disc under internal pressure
A. Kurşun, I.  Ağır and M. Topçu

A three dimensional model for nanocrystalline materials based on grain interior and grain boundary deformation mechanisms
E. Gürses

Combined creep and plastic analysis with numerical methods
E. Pineda, J. Zapata and A. Kryvko

A combined stress state dependent plasticity model with damage for ULCF failure prediction
D. Novokshanov, S. Münstermann and W. Bleck

Numerical simulation based on FEM / MLS coupling for solid mechanics
Y. Ghozzi, C. Labergere and P. Villon

A thermoviscoplastic model with damage for simultaneous hot/cold forging analysis
C. Bröcker and A. Matzenmiller

Advanced Computational Methods III WeE09
Room: VS216

The method of fundamental solutions together with the successive-approximation method as an alternative approach to solving some plane elastoplastic problem
M.A. Jankowska and J.A. Kolodziej

Numerical simulation of dynamic soil-structure interaction with particle finite element limit analysis
X. Zhang, K. Krabbenhoft and D. Sheng

A geometrically nonlinear three-dimensional finite element beam formulation of Kirchhoff type
C. Meier, A. Popp and W.A. Wall

Isogeometric collocation for rate-independent plasticity
L. De Lorenzis and T.J.R. Hughes

Damage, Fracture and Fatigue II WeE10
Room: VS206a

Finite element analyses of fatigue crack growth under small scale yielding conditions modelled with a cyclic cohesive zone approach
S. Roth and M. Kuna

Effect of inclusion distribution on ductile fracture toughness and fracture surface roughness
A. Srivastava, S. Osovski, L. Ponson, V. Tvergaard, E. Bouchaud and A. Needleman

Numerical simulation of cyclic microcrack growth capability using a crystal plasticity based material model
M. Sharaf, N. Vajragupta, S. Münstermann and W. Bleck

A method for post-processing of finite element analyses to assess critical macroscopic voids
P. Noury, M. Unosson and M. Veljkovic

Nanoparticle formation under electric pulse dispersion of metal wire with interfaces
A.V. Abdrashitov, D.S. Kryzhevich, K.P. Zolnikov and S.G. Psakhie

Incipient plasticity nucleation and evolution peculiarities in bcc materials under nanoindentaion
D.S. Kryzhevich, A.V. Korchuganov, K.P. Zolnikov and S.G. Psakhie



Thursday, September 5

09:00 - 10:30
Plenary Lectures IV
ThMP
Room: Auditorium

Modelling of interaction phenomena in tumor growth
B.A. Schrefler and G. Sciumè

Variational multi-physics of solids at fracture
C. Miehe

Circumventing the trouble of quadrature in meshfree method: variational consistency in Galerkin weak form and collocation in strong form
J.S. Chen, M. Hillman and H.Y.  Hu


10:30 - 11:00
Coffee-break

11:00 - 13:00
TECHNICAL SESSIONS
IS - Modeling of Solids at Failure through Diffusive Damage Evolution and Evolving Sharp Discontinuities I
Invited Session organized by Ekkehard Ramm, Francisco Armero and Christian Linder
ThM01
Room: Sala d’Actes

Crack Propagation in thin shells by explicit dynamics solid-shell models
M. Pagani and U. Perego

Hybrid continuum micromechanics and phasefield modeling of fracture and diffusion processes in porous materials
J.J. Timothy and G. Meschke

Strain injection techniques in numerical modeling of propagating material failure
I.F. Dias, J. Oliver and A.E. Huespe

Objective multiscale analysis of random heterogeneous materials
O. Lloberas-Valls, F.P.X. Everdij, D.J. Rixen, A. Simone and L.J. Sluys

A finite element strategy coupling a gradient-enhanced damage model and cohesive cracks for quasi-brittle materials
E. Tamayo-Mas and A. Rodríguez-Ferran

IS - Nonlocal Formulations in Plasticity and Damage
Invited Session organized by Jose Cesar de Sa
ThM02
Room: VS208

Gradient theories, micromorphic theories, and continuum theories of defects - A comparison considering thermodynamic coupling
J. Schnepp

Elastoplastic nonlocal micromorphic formulation with damage and hardening gradients
M. Hamed and K. Saanouni

Assessment and comparisons of non-local models at different stress states
F.X.C. Andrade, J. Cesar de Sa and F.M.A. Pires

Modeling anisotropic damage in elasto-plastic materials with structural defects
S. Cleja-Tigoiu and V. Tigoiu

Modeling the hall-petch effect with a gradient crystal plasticity theory including a grain boundary yield criterion
S. Wulfinghoff, E. Bayerschen and T. Böhlke

IS - Multiscale Analysis of Wood and Wooden Structures I
Invited Session organized by Herbert A. Mang and Josef Eberhardsteiner
ThM03
Room: VS217

Wood constitutive modeling by computational homogenization: Influence of microfibril angle, cell wall thickness and variability
N.P. van Dijk, E.K. Gamstedt and I. Bjurhager

Influence of knot groups on effective mechanical properties of solid-wood based products determined by means of 3D Finite-Element simulations
M. Lukacevic, J. Füssl and J. Eberhardsteiner

Numerical modelling of dowel connections in timber constructions
W. Lederer, T.K. Bader and J. Eberhardsteiner

A numerical approach for wood products – from clear wood properties and ‘structural’ inhomogeneities to stochastic aspects of timber
G. Kandler, J. Füssl and J. Eberhardsteiner

General framework for material modelling of structured solids:three - dimensionality, equivalent micro – structure & distinction of failure modes
B. Krenn and W. Guggenberger

Composites ThM04
Room: VS218

An extended material model for filled elastomers considering filler-filler interactions
D. Juhre, R. Raghunath and M. Klueppel

A numerical study on the behaviour of fire protected concrete structural elements strengthened with CFRP composite systems
J. Sampaio, J. Alfaiate, C. Tiago, C. López, D. Dias-da-Costa, J. Firmo and J. Correia

An XFEM-CZM Implementation for large scale parallel composites fracture simulations
G. Vigueras, C. Samaniego-Alvarado, G. Houzeaux, F. Sket, J. Molina, A. Makradi, M. Vázquez and A. Jérusalem

Direct method-based statistical limit analysis of WC-Co composites
G. Chen, A. Hachemi and D. Weichert

Simulation of fibre-concrete interaction using a discrete crack approach
C. Fernandes, D. Dias-da-Costa, J. Alfaiate and E. Júlio

Non-linear micromechanics based analysis of a satin5 representative single ply volume element
M.A. Melchior, F. Lani, X.P. Morelle, L. Brassart, I. Doghri and T. Pardoen

Geomechanics I ThM05
Room: VS219

Unique Critical State single-surface anisotropic hyperplasticity
W.M. Coombs

Anisotropy effects in a deep excavation in stiff clay
J. Vaunat, A. Gens and R.  Vasconcelos

On integration strategies for Perzyna-type viscoplasticity, and application to zero-thickness interface elements
I. Aliguer, I. Carol and S. Sture

Zero-thickness interface elements with H-M coupling, formulation and applications in geomechanics
D. Garolera, I. Aliguer, J.M. Segura, I. Carol, M.R. Lakshmikantha and J. Alvarellos

Relative contributions of solid skeleton visco-plasticity and water viscosity to the poro-mechanics behaviour of Callovo-Oxfordian claystone.
S. Rahal, G. Casaux-Ginestet and A. Sellier

Multiscale Material Problems II ThM06
Room: VS213

Multiscale resolution continuum theory for elastic plastic element material with damage, an implicit 3D implementation
H. Qin, L. Lindgren, W.K. Liu and S. Tang

Multi-scale Studies of Micro-Instabilities in Foamed Materials
V.D. Nguyen and L. Noels

Crystal texture evolution analyses in metal drawing processes by using two-scale finite element method
T. Yoshida, H. Kuramae, H. Morimoto, T. Yamaguchi, T. Ohata and E. Nakamachi

Construction of 3D statistically similar RVEs for dual-phase steel microstructures
D. Balzani, L. Scheunemann, D.  Brands and J. Schröder

On the prediction of macroscopic yield surfaces of a pearlitic steel using multiscale modeling
E. Lindfeldt and M. Ekh

A combined precipitation and crystal plasticity model for AlMgSi alloys
M. Khadyko, S. Dumoulin, O.R. Myhr and O.S. Hopperstad

Forming Processes Simulations II ThM07
Room: VS214

Combining of finite elements method and data mining techniques to material characterization of electrolytic tinplate
M. Illera-Cueva, R. Lostado-Lorza, M. Corral-Bobadilla and P. Villanueva-Roldán

Investigation of surface topography evolution of sheet aluminum under pressure and tension
B.-A. Behrens, A. Bouguecha and B. Homann

Numerical modelling of continuous and serrated chip formation using the particle finite element method (PFEM)
J.M. Rodriguez , J.C. Cante and J. Oliver

Multi-objective design optimisation of a 3D-Rail stamping process using a robust multi-objective optimisation platform (RMOP)
D.S. Lee, M. Coma, H. Espinoza, O. Fruitos and J. Pons-Prats

Evaluation of fatigue and residual stress of copper pipe
J-M. Koo, S-Y. Kim and C-S. Seok

Simulation of deformation of layered sheet during micro powder imprinting process
F. Tsumori, Y. Xu, H. Kang, T. Osada and H. Miura

Advanced Material Models III ThM08
Room: VS215

Prediction of the transient effects and long-term behavior in glassy polymers
S. Holopainen

A model of gradient crystal plasticity at finite deformations
D. Gottschalk, C.B. Hirschberger, A. McBride, B.D. Reddy and P. Wriggers

Numerical simulation of breast deformation under static conditions for the material properties estimation of hyperelastic skin and soft elastic tissues
M. Zain-ul-abdein, F. Morestin, L. Bouten and J. Cornolo

Homogenization of heterogeneous, fibre structured materials
S. Fillep, J. Mergheim and P. Steinmann

Simulation of strain induced anisotropy for polycarbonate films
I. Caylak, R. Mahnken and C. Dammann

Advanced Computational Methods IV ThM09
Room: VS206a

Hysteretic beam element with degrading Bouc-Wen models
C. Sofianos and V. Koumousis

Distributed plasticity analysis of frame structures in rate form
I. Gkimousis and V. Koumousis

New 3D-beam finite element including non-uniform torsion with the secondary torsion moment deformation effect
J. Murin, M. Aminbaghai, V. Kutis and H.A. Mang

A mesoscale finite element simulations of intermittent plastic flow of micropillar compression under the hybrid loading mode
X. Zhang and F. Shang

On the stability of the recently developed NICE integration scheme
B. Starman, M. Halilovič, M. Vrh and B. Štok

Application of the method of fundamental solutions for inverse problem related to the determination of elasto-plastic properties of prysmatic bar
J.A. Kolodziej and M. Mierzwiczak

Damage, Fracture and Fatigue III ThM10
Room: VS216

Fracture model for Beryllium and other materials.
A. Hunter and A. Zubelewicz

Evolution of nonlocal damage in steel under cyclic straining
S. Heinrich, U. Kowalsky and D. Dinkler

Application of the continuum damage mechanics models in the three point bending test of the Ti-6Al-4V titanium alloy specimens
N. Allahverdizadeh, A. Manes and M. Giglio

Implementation of a Lode angle sensitive yield criterion for numerical modelling of ductile materials in the large strain range
T. Coppola, L. Cortese and F. Campanelli

Modeling of anisotropy evolution in pearlitic steel
N. Larijani and M. Ekh



13:00 - 14:00
Lunch

14:00 - 16:00
TECHNICAL SESSIONS
IS - Modeling of Solids at Failure through Diffusive Damage Evolution and Evolving Sharp Discontinuities II
Invited Session organized by Ekkehard Ramm, Francisco Armero and Christian Linder
ThA01
Room: Sala d’Actes

The finite strain cohesive band model
J.J.C. Remmers, R. de Borst, C.V.  Verhoosel and A. Needleman

Multi-scale computational homogenization modelling of micro-scale damage towards macroscopic failure
E. Bosco, V. Kouznetsova, E. Coenen and M.G.D. Geers

Modelling and simulation of curing and failure of particle-filled polymers
J. Mergheim and P.  Steinmann

Modeling and simulation of conducting crack propagation in ferroelectric single crystals under purely electrical loading
A. Abdollahi and I. Arias

Modeling failure at the grain scale: Critical state
J.E.  Andrade and K-W.  Lim

IS - Computational Modeling of Material Forming Processes I
Invited Session organized by Jean Philippe Ponthot and Carlos Agelet de Saracibar
ThA02
Room: VS208

Free surface iterative algorithm based on a global resolution method for steady-state calculation of metal forming processes
U. Ripert, L. Fourment and J.L. Chenot

Implementation of multi-scale finite element simulation for microforming process prediction
M. Taureza, X. Song and S. Castagne

Numerical simulation of severe plastic deformation during high pressure torsion
P. Verleysen, F. Van den Abeele and J. Degrieck

The use of an advanced anisotropic damage model to the sheet metal forming simulations
H. Badreddine, K. Saanouni and D.T.  Nguyen

The pin shape effect on the friction stir welding process
N. Dialami, M. Chiumenti, M. Cervera and C. Agelet de Saracibar

A novel stress-accurate FE technology for the numerical simulation of the FSW process
M. Chiumenti, N. Dialami, M. Cervera and C. Agelet de Saracibar

IS - Multiscale Analysis of Wood and Wooden Structures II
Invited Session organized by Herbert A. Mang and Josef Eberhardsteiner
ThA03
Room: VS217

The effect of growth ring structure on the response of wood subjected to changing climate conditions
L. Krzemień, M. Lukomski, M. Strojecki and Ł Bratasz

Investigation of delamination process in adhesively bonded hardwood elements under changing environmental condition
M.M. Hassani, S. Ammann, F.K.  Wittel, P.  Niemz and H.J. Herrmann

FEM modelling of wood cell deformation under dynamic loads
S. Fortino and P. Hradil

Multi-scale analysis of timber framed structures filled with earth and stones
F.  Vieux-Champagne, S. Grange, Y. Sieffert and L. Daudeville

Multi-scale modelling of timber-framed structures under seismic loads
C. Boudaud, L. Daudeville, J. Baroth and S.  Hameury

Dynamic serviceability design of attic room floors in modern timber frame houses
B. Zhang, M. Cullen, T. Kilpatrick and R. Delaruell

IS - Applications of Computational Methods to Product and Process Design for Industry I
Invited Session organized by Takashi Iizuka and Takashi Kuboki
ThA04
Room: VS218
Chair: Takashi Iizuka

Propagation mechanism of non-uniform distribution of stress and strain in tension test
R. Morimoto and M. Akiyama

Characteristics of micro incremental in-plane bending of sheet metal using tiltable punch
A. Azrie and T. Kuboki

Effect of die half angle in tube nosing using relieved die
M. Abe and T. Kuboki

Evaluation of water film by Reynolds‘ equation in deep drawing using high-pressured water jet
T. Kuboki, Y. Horikoshi, M. Murata, K. Matsui and M. Tsubokura

Finite element analysis on interfacial stress state in scratch test
K. Hayakawa, H. Mori, K. Koyabu, T. Nakamura and S. Tanaka

Geomechanics II ThA05
Room: VS219

Numerical modelling of collapse of a granular mass on a horizontal surface
C. Dávalos, J.C. Cante, J. Oliver and J.A. Hernández

Decomposition techniques in computational limit analysis
N. Rabiei, A. Huerta and J.J. Muñoz

THMC modelling of jet-grouting
J.M. Gesto, A. Gens and M. Arroyo

Limit analysis for porous materials applied for slope stability analysis
F. Figueiredo, L. Borges, L. Costa and I. Pontes

H-adaptive finite element analysis of consolidation problems in geomechanics
M. Kardani, M. Nazem and A.J. Abbo

Multiscale Material Problems III ThA06
Room: VS213

Hierarchical multiscale optimization of the microstructure arrangement and macroscopic topology in computational material design
A.E. Huespe, J. Oliver, A. Ferrer, J.A. Hernández and J.C. Cante

Modeling flows in periodically heterogeneous porous media with deformation-dependent permeability
E. Rohan, V. Lukes and R. Cimrman

A crystal plasticity framework based on the simplified continuum dislocation dynamics (sCDD) theory
M. Monavari, S. Schmitt, O. Kapetanou and S. Sandfeld

An adaptive quasi-discrete method for the localized deformation of heterogeneous materials
P.Z. Berke, R.H.J. Peerlings, T.J.  Massart and M.G.D. Geers

The influence of grain size distribution on strain hardening behavior for dual phase steels using statistically informed artificial microstructure model and crystal plasticity
N. Vajragupta, J. Lian, M. Sharaf, S. Münstermann and W. Bleck

Towards programmable matter -- a concept of functionally evolving microstructures
J. Lengiewicz, P. Hołobut and M. Kursa

Forming Processes Simulations III ThA07
Room: VS214

Simulation of thin sheet generation processes by using thin plate finite elements in absolute nodal coordinate formulation
P. Gruber, Yu. Vetyukov and J. Gerstmayr

A hybrid modelling approach to the simulation of internal traverse grinding
R. Holtermann and A. Menzel

Simulation of the ring rolling process taking into account automatic motion control - prediction of microstructure
P. Lasne, A. Settefrati and M. Barbelet

Industrial application of advanced adaptive concepts for automatic panel benders
W. Kunze, C. Zehetner, F. Hammelmueller, E.C. Cojocaru, H.J. Holl and H. Irschik

Advanced mechanical simulation models for automatic panel benders
F. Hammelmueller, C. Zehetner, A.S. Pechstein, w. Kunze, H.J. Holl and H. Irschik

On the influence of material properties in sheet bending processes
C. Zehetner, W. Kunze, R. Heuer and H. Irschik

Advanced Material Models IV ThA08
Room: VS215

Modeling of the cyclic behaviour of Haynes 282
R. Brommesson and M. Ekh

Computational analysis of stationary crack propagation in NiTi SMAs using a space-discrete stationary method
W. Zaki, S. Hazar, Z. Moumni and G. Anlas

FE analysis of axial crushing with AZ31 circular tube considering tension-compression asymmetry
J.H. Yoon, Y.S. Lee and O. Cazacu

Crystal plasticity model calibration for 316L stainless steel single crystals during deformation
S. El Shawish, M. Bogataj and L. Cizelj

Simulation of plasticity and martensitic phase-transformations based on representative transformation directions
R. Ostwald, R. Holtermann, T. Bartel and A. Menzel

Stress correlations of dislocations in a double-pileup configuration: a continuum dislocation density approach
D. Dickel, K. Schulz, S. Schmitt and P. Gumbsch

Advanced Computational Methods V ThA09
Room: VS206a

Optimizing the remeshing procedure by computational cost estimation of adaptive FEM technique
F. Bayat and H. Moslemi

A finite point method approach for the numerical simulation of isotropic damage using a cohesive crack formulation
L. Pérez, F. Valdivia and S. Oller

Implementation of the method of fundamental solution for solving problem of displacement in plasticity deformations
A. Uscilowska

An Eulerian 3-steps Godunov-type numerical scheme for calculation of elastic-plastic flow
A. Serezhkin, I. Menshov and A. Mischenko

Formulation of an isogeometric shells element for crash simulation
C. Adam, S. Bouabdallah, M. Zarroug and H. Maitournam



16:00 - 16:30
Coffee-break

16:30 - 18:30
TECHNICAL SESSIONS
IS - Numerical Modelling of Concrete Structures
Invited Session organized by Pavao Marovic and Tony Jefferson
ThE01
Room: Sala d’Actes

Multiscale material modelling for ASR-affected concrete structures
R. Esposito and M.A.N. Hendriks

Diffusion-reaction model for alkali-silica reaction in concrete
J. Liaudat, C.M. López and I. Carol

A smoothed approach to simulating directional cracking in finite element models for concrete
A. Jefferson, I. Mihai and P. Lyons

3D numerical model of a confined fracture test in concrete
O. Montenegro, D.  Sfer, C.M. López and I. Carol

Three-axial stress state material validation by PRECON3D
M. Galic and P. Marovic

IS - Computational Modeling of Material Forming Processes II
Invited Session organized by Jean Philippe Ponthot and Carlos Agelet de Saracibar
ThE02
Room: VS208

A 9-node and a 7-node solid-shell elements for thin shells and sheet forming applications
B. Bassa, F.  Sabourin and M. Brunet

Automatic solver for computational plasticity based on Taylor series and automatic differentiation
A. Lejeune, H.  Boudaoud, N.  Mathieu and M.  Potier-Ferry

A probabilistic characterization, propagation, and sensitivity analysis of uncertainties in a metal forming application
M. Arnst and J-P. Ponthot

The Influence of numerical simulation parameters and modelling decisions in the prediction of wrinkling defects
M. Henriques, T. Grilo, R. Sousa and R. Valente

Some gaps between numerical developments and their industrial applications
F. Moussy

Numerical simulation of double cup extrusion test using the arbitrary lagrangian eulerian formalism
R.  Boman, R. Koeune and J-P.  Ponthot

IS - Modeling of Plasticity and Damage under Cyclic Loading
Invited Session organized by Renato Natal Jorge
ThE03
Room: VS217

The non-linear analysis cylindrical shell structures considering a meshless method
H.M.S. Duarte, J. Belinha, L.M.J. Dinis, A.A. Fernandes and R.M. Natal Jorge

Extension of the lemaitre model for ductile damage to ultra-low cycle fatigue
M. Seabra, R.M. Natal Jorge, J. Cesar de Sa and A.A. Fernandes

Analysis of ultra low cycle fatigue problems with the Barcelona plastic damage model
X.  Martinez, S.  Oller, L. G.  Barbu and A.H. Barbat

Dynamics of structural defects and plasticity: models and numerical implementation for dynamical problems
A.E. Mayer, E.N. Borodin, V.S. Krasnikov and P.N. Mayer

IS - Applications of Computational Methods to Product and Process Design for Industry II
Invited Session organized by Takashi Iizuka and Takashi Kuboki
ThE04
Room: VS218
Chair: Takashi Kuboki

Numerical simulation and experimental validation of texture in extruded wires of a BCC metal
M. Xie, N. Baimpas, C. Reinhard and A. M Korsunsky

Micro-macro simulation for severe plastic deformations by the homogenization method and marker integration FEM
K. Matsui, I. Watanabe and T. Yamada

Simple numerical simulation of die abrasion during initial abrasive stage of punching process
T. Iizuka and D. Sakamoto

Numerical calculation of tensile test using a dumbbell-shaped in thickness direction specimen
H. Usui and T. Iizuka

Unloading and re-loading features of pre-strained steel at low temperature
D. Li and M. Akiyama

Biomechanics and Bio-Medicine ThE05
Room: VS219

Cell-centered truss model for the analysis of cell rheology and remodelling
N. Asadipour, S. Albo and J.J. Muñoz

Computational modelling of muscle plasticity through sarcomerogenesis
A.M. Zöllner, M.A. Holland, M. Böl and E. Kuhl

Computational approaches to coupled cardiac electromechanics incorporating electrical and mechanical dysfunctional cases
S. Goktepe and E. Berberoglu

Pulsatile non-Newtonian blood flow in image-based models of carotid bifurcation
J. Vimmr, A. Jonasova and O. Bublik

Optimum design of magnetic field environment for axonal growth control in nerve cell regeneration process using electromagnetic field analyses
R. Okuda, Y. Takahashi, Y. Morita and E. Nakamachi

Multi-Physics Problems ThE06
Room: VS213

Finite element formulation to study hysteretic phenomena in dielectric materials with Debye memory
J.L. Pérez-Aparicio, R. Palma and R.L. Taylor

Computational modelling of thermo-structure interaction in rocket nozzles
C. Danowski, L.  Yoshihara and W.A. Wall

Modeling of plasticity coupled to diffusion and chemical reaction in high-capacity electrodes for Li-ion batteries
L. Brassart, K. Zhao and Z. Suo

Modeling and simulation of a multiphase continuum approach for methane oxidation in landfill cover layers
T. Ricken, A. Sindern, J. Bluhm, R. Widmann and M. Denecke

Finite element modeling of polarization processes in ferroelectric ceramics by the methods of theory plasticity
A.S. Skaliukh

Contact and Impact Mechanics II ThE07
Room: VS214

Dynamic response of imperfect beams under impact: R-P analysis and E-P simulation
F.L.  Chen, T.X. Yu and J.L. Yang

Viscoelastic evaluation of biological soft tissue in crush process at subsonic level for anti-bird strike technology of airplane
A. Sakuma, N. Torii, A. Mizushima and H. Shoji

A unified contact-interaction formulation for frictional sliding, peeling and long-range attraction
R.A. Sauer and L. De Lorenzis

Investigation of experimental research on the low velocity impact damage behavior of NCF composite plates
I. Ağır, A. Kurşun and N., B. Bektaş

Calculation of the elastic modules of materials behind strong shock waves
E. Kraus and I. Shabalin

Damage, Fracture and Fatigue IV ThE08
Room: VS215

Continuum damage models dependent on the third invariant and with multiple calibration points
L. Malcher, E.N. Mamiya and F.M.A. Pires

Nonlocal approach for the analysis of damage in hybrid masonry under cyclic loading
I. Stanciulescu, Z. Gao and M. Nistor

3D-Mesomechanical analysis of cracking and spalling of concrete subject to high temperatures
A. Pérez, M. Rodríguez, C.M. López and I. Carol

Quasi-static and dynamic nonlinear crack growth at bi-material interfaces
M. Paggi and M. Corrado

Numerical simulation of nonisothermal plasticity and thermomechanical fatigue of turbomachinery components
Y.M. Temis, K.K. Azmetov and A.I. Fakeev

Advanced Computational Methods VI ThE09
Room: VS216

Bodner-Partom visco-plastic dynamic sphere Benchmark problem
B.M. Chabaud, J.S. Brock and T.O. Williams

Characterization and modeling of viscoelastic interface
L. Rouleau, J.-F. Deü, A. Legay and F. Le Lay

Modelling of the low temperature-dependent behaviour of a ductile adhesive under monotonic tensile/compression-shear loads using a non associated pressure dependent model
C. Badulescu, J.Y. Cognard, J. Maurice, R.  Créac’hcdec, N.  Carrère and P. Vedrine

A finite strain discrete dislocation plasticity model
N. Irani, J.J.C. Remmers and V.S. Deshpande

Solving one-dimensional problems of elasto-plastic deforming and damage by using Godunov method and method of physical processes division
A. Mischenko, I. Menshov and A. Kiselev

Lifetime assessment for an ideal elastoplastic thick-walled spherical member under general mechanochemical corrosion conditions
Y.G. Pronina



20:00 - 23:00
Conference Banquet