Tuesday, September 4th
|
|
17:00 - 19:00
PRE-REGISTRATION
|
|
Wednesday, September 5th
|
09:00 - 11:00
Plenary Lectures I
|
WeMP
Room: Auditorium
Chair: to be confirmed
|
Multi-scale Methods for Failure Analysis: Circumventing Loss of Ellipticity
T. Belytschko, J-H. Song, X. Mei
The Extended Finite Element Method: State of the Art for Linear Problems and Challenges Ahead
N. Moës
On a Robust Implicit/Explicit Integration Scheme for Non-Linear Material Models
J. Oliver, A.E. Huespe, J.C. Cante
On the Simulation of Frictional Faulting by the Embedded Strong Discontinuity, Nonlinear Contact Mechanics, and the Extended FE Methods
R.I. Borja, P.F. Sanz, F. Liu
|
|
11:00 - 11:30
Coffee Break
|
|
11:30 - 13:30
TECHNICAL SESSIONS
|
|
Forming Process Simulations I
|
WeM1
Room: VS201
Chair: to be confirmed
|
Simulation of Cold Forging of Bevel Gear under Various Friction Conditions
A. Saboktakin , M. Farzin
FE-Based Radiation Length Analysis of Superplastically Formed Products
C. Snippe, T. Meinders
Computational Aspects of a Bolt Head Trimming Operation
J. Petruska, J. Borkovec
Analysis of Porous Beams During H-Profiled Rolling Forming using the Finite Element Method
D.C. Chen, C.F. Chen
Numerical Modelling of Thermal Behaviour due to Geometrical Changes during AX Symmetric Extrusion Process
M.B. Adeyemi, J.S. Ajiboye
|
Computational Aspects of Gradient and Related Theories of Plasticity
Invited Session organized by Daya Reddy, Krishna Garikipati
|
WeM2
Room: VS213
Chair: to be confirmed
|
A Discontinuous Galerkin Formulation for an Incompatibility-based Strain Gradient Plasticity Theory
K. Garikipati, J. Ostien
Generalised Plasticity: Modelling Options and Computational Aspects
P. Steinmann, C.B. Hirschberger, E. Aifantis
Discontinuous Galerkin Methods for Problems in Finite Strain Gradient Plasticity
B.D. Reddy, A.T. McBride
On Short and Long Range Effects in Dislocation Driven Continuum Plasticity
M. Geers, A. Roy, R. Peerlings, Y. Kasyanyuk
|
Computational Contact and Interface Mechanics I
Invited Session organized by Tod Laursen
|
WeM3
Room: VS214
Chair: to be confirmed
|
Generalized closest point projection for contact analyses: on existence and uniqueness for arbitrary contact surfaces
A. Konyukhov, K. Schweizerhof
A Mortar Discretization Technique for Thermomechanically Coupled Problems
E. Berend, P. Wriggers, U. Nackenhorst
Numerical Treatment of Dissipative Effects within an ALE-Framework of Rolling
U. Nackenhorst, M. Ziefle
|
Computational Limit and Shakedown Analysis I
Invited Session organized by Scott Sloan, Kristian Krabbenhoft
|
WeM4
Room: VS215
Chair: Scott Sloan
|
Generalized Limit Analysis in Poroplasticity
R. Ardito, G. Cocchetti, G. Maier
Analysis of Spatial Variability using Random Field Numerical Limit Analyses
K. Kasama, A. Whittle, K. Zen
Numerical Implementation of the Kinematical Theorem: Application to the Determination of 3D Passive Earth Pressures of Cohesionless Soils
M. Vicente da Silva, A. Antão, N. Guerra
Shakedown Analysis using Adaptive Mesh Refinement
A.V. Lyamin, K. Krabbenhoft, S.W. Sloan
Finite Element Shakedown and Limit Reliability Analysis of Thin Shells
T.N. Tran, M. Staat, R. Kreißig
Automatic Limit Analysis of Three Dimensional Frames
K.V. Spiliopoulos, M.G. Marinou
Effect of Singular Plastic Velocity Fields on Shakedown Analysis: A Simple Analytical Example
S. Alexandrov, D.C. Pham
|
Computational Methods in Biomechanics and Mechanobiology I
Invited Session organized by Gerhard A. Holzapfel
|
WeM5
Room: VS216
Chair: to be confirmed
|
Modeling of Arterial Dissection
G.A. Holzapfel, G. Sommer, T.C. Gasser
An Anisotropic Preconditioning Model for Soft Biological Tissues
M. Itskov, A.E. Ehret
A Finite Element Model of Cardiac Electrophysiology and Mechanics
J. Sundnes, M. S Alnæs, K-A. Mardal
Calibration of a Large Strain Poro-Viscoelastic Model for Brain Tissue
K. Runesson, H. Johansson, F. Larsson
Microplane Model for Biological Soft Tissue
F.C. Caner, I. Carol
Characterizing the Mechanical Response of Soft Human Tissue for Medical Applications
E. Mazza, M. Bauer, M. Bajka, G.A. Holzapfel
|
Computational Modelling of Forming Processes I
Invited Session organized by Carlos Agelet de Saracibar, Jean-Philippe Ponthot
|
WeM6
Room: VS217
Chair: to be confirmed
|
Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Forming Processes
R. Boman, L. Papeleux, J.P. Ponthot
Adaptive Hourglass Stabilization in Forming Simulations by Means of Reduced Integration
S.H. Reese, M. Schwarze
Mean-field Modelling of Non-monotonic Plasticity in TRIP-Assisted Multiphase Steel
L. Delannay, P.J. Jacques, R. Aerens, T. Kuwabara
A Variational Framework for General Isotropic Finite Viscoplasticity Models
E.A. Fancello, J.M. Vassoler, L. Stainier
A New 4-Node Shell Element using 16 Degrees of Freedom
F. Sabourin, J. Carbonniere, M. Brunet
|
|
Geomechanics I
|
WeM7
Room: VS218
Chair: to be confirmed
|
A Predictive Plasticity Model for Static Liquefaction
J.E. Andrade
Changes of Mechanical Parameters of Soils due to Groundwater Flow - Processes Identification
M. Broucek, P. Kuklik
Modelling the Undrained Creep Behaviour of a Hard Clay in the Super-Critical Region
A. Vieira, J. Maranha, J. Bilé Serra, R. Correia
|
|
Multi-scale Material Models
|
WeM8
Room: VS219
Chair: to be confirmed
|
A Constitutive Model for Nonlocal Plasticity
F. De Angelis
A Strain Gradient Crystal Plasticity Theory based on Dislocation Densities
L. Bardella
Finite Element Simulations of Spherical Indentation Experiments in Thin Films at the Micro-scale
O. Casals, S. Forest
Numerical Simulation for Material Processing by using the Phase-Field Method and the Homogenization Method
K. Matsui, T. Koyama, K. Terada
Multiscale Simulations and Mesoscopic Modelling of Multi-Walled Carbon Nanotubes
I. Arias, M. Arroyo
Three-Dimensional Cellular Automata for Simulation of Microstructure Evolution
D.S. Svyetlichnyy
|
|
|
13:30 - 14:30
Lunch Break
|
|
14:30 - 16:00
Plenary Lectures II
|
WeAP
Room: Auditorium
Chair: to be confirmed
|
Multi-scale Formulation for Modeling Grain Boundary Migration and Dislocation Induced Plastic Deformation in Polycrystalline Materials
J.S. Chen, X. Zhang, S. Mehraeen
Modeling of Seamless Pipe Manufacturing Processes
E. Dvorkin
Verification of Linear and Nonlinear Structural Models through Strict Upper Error Bounds
P. Ladevèze
|
|
16:00 - 16:30
Coffee Break
|
|
16:30 - 18:30
TECHNICAL SESSIONS
|
|
Forming Process Simulations II
|
WeA1
Room: VS201
Chair: to be confirmed
|
Research of Mechanism for Surface Texture by Sheet Rolling
Y. Fujii, Y. Maeda
Process Design and Finite Element Modeling of Tubes Manufacturing in the Ring Roller Plant
Z. Malinowski, W. Madej
3D Finite Element Simulation of Roughness Transfer in Temper and Skin-Pass Rolling
C. Edelbauer, A. Kainz, D. Paesold, K. Zeman
Thermo-Mechanical Analysis and Microstructural Evolution in Hot Strip Rolling
S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad, A. Kermanpour
Finite Element Modelling of Strain-Stiffening in Biaxial Hot Drawing Process of Poly(Ethylene Tetreohthalate)
K. Hasanpour, S. Ziaei-Rad
Comparison between “The Sequential Quadratic Programming Algorithm” and the Minimization of Maximum Bending Load and Springback in Sheet Metal Forming obtained by an Experimental Approach
R. Bahloul, H. Bel Hadj Salah, Ph. Dal Santo
|
Computational Modelling of Geotechnical Problems
Invited Session organized by Jose Marques
|
WeA2
Room: VS213
Chair: to be confirmed
|
A Discrete Element Approach for Proppant Flowback Analyses
L.C. Vieira, C. Romanel, D.M. Roehl
A finite element analysis of the consolidation of unsaturated soils
A.R. Pereira, C. Romanel, C.L. Nogueira
Simulation of Pull-out Tests on Fully-bonded Fibreglass Reinforcement
A. Costa, A. Silva Cardoso, J. Almeida e Sousa
A Numerical Study on the Seismic Response of a Geosynthetic Reinforced Slope
C. Silva Vieira, M.L. Lopes, L. Caldeira
Geometrically Non-Linear Modelling of Shallow Foundation Collapse on Sloping Ground
J. Marques, R. Teixeira
|
Computational Contact and Interface Mechanics II
Invited Session organized by Tod Laursen
|
WeA3
Room: VS214
Chair: to be confirmed
|
A Stabilized Integration Method for Frictional Dynamic Contact Problems
S. Hüeber, B. Wohlmuth
A Mortar Based Contact Formulation for Non-linear Dynamic Problems using Dual Lagrange Multipliers
S. Hartmann, S. Brunssen, E. Ramm, B. Wohlmuth
A Stabilized Treatment of Arbitrarily Oriented Interfaces
J. Sanders, J. Dolbow, T. Laursen
Generalized Closest Point Projection for Contact Analyses: On Existence and Uniqueness for Arbitrary Contact Surfaces
A. Konyukhov, K. Schweizerhof
|
Computational Limit and Shakedown Analysis II
Invited Session organized by Scott Sloan, Kristian Krabbenhoft
|
WeA4
Room: VS215
Chair: Giulio Maier
|
Failure Modes and Bounding Loads in Shakedown Analysis
N. Zouain
Evaluation of Limits in Excess of the Shakedown Limit
A. Ponter
Discontinuity Layout Optimization: A New Numerical Procedure for Upper Bound Limit Analysis
M. Gilbert, C.C. Smith
Limit Analysis and Unilateral Contact
L. Naccarato, L. Borges
Shakedown Analysis with Nonlinear Yield Function
G. Garcea, L. Leonetti
Limit Analysis in Axisymmetric Conditions with Cone Shaped Yield Surface
I. Pontes Filho, L. Borges, N. Zouain, L. M Costa
Variational Plasticity Models for Geomaterials
K. Krabbenhoft, A.V. Lyamin, S.W. Sloan
|
Computational Methods in Biomechanics and Mechanobiology II
Invited Session organized by Gerhard A. Holzapfel
|
WeA5
Room: VS216
Chair: to be confirmed
|
Stability of Growth Models for Soft Tissue
K. Garikipati, H. Narayanan, D.T. O´Connor, J.E. Olberding
Computational contact analysis of stents interacting with patient-specific stenotic arteries using smooth surface discretization
D.E. Kiousis, G.A. Holzapfel
Mechanical Stresses in Abdominal Aortic Aneurysm. Material Anisotropy a Parametric Study
J. Rodriguez, C. Ruiz, M. Doblaré, G.A. Holzapfel
"Universal" Microstructural Patterns in Cortical and Trabecular, Extracellular and extravascular Bone Materials: Micromechancis-based Prediction of Anisotropic Elasticity
C. Hellmich, A. Fritsch
|
Computational Modelling of Forming Processes II
Invited Session organized by Carlos Agelet de Saracibar, Jean-Philippe Ponthot
|
WeA6
Room: VS217
Chair: to be confirmed
|
Numerical Simulation of Multi-Pass Welding and Metal Deposition Processes
M. Chiumenti, C. Agelet de Saracibar, M. Cervera
Optimum Forming Strategy with a 3D Reconfigurable Die
S. Boers, P. Schreurs, M. Geers
Texture-Based Plastic Anisotropy for Finite Element Simulations
A. Van Bael, S.K. Yerra, P. Van Houtte
Numerical Simulation of Semi-Solid Thixoforming
R. Koeune, J.P. Ponthot
Strategies for Modelling of Die Compaction of Powders
I.C. Sinka, A.C. Cocks
|
|
Advanced Material Models I
|
WeA8
Room: VS219
Chair: to be confirmed
|
Numerical reconstruction of laboratory brickwork tests
A. Wawrzynek, A. Cińcio
Material Model describing Inelastic Behaviour of Asphalt Mixtures using Multi-Component Continuum Mechanics
B. Brodersen, L. Aschenbrenner, U. Kowalsky, D. Dinkler
Consistent Plane Stress–3D Conversion of Hardening Models and Yield Criteria
M. van Riel, A.H. van den Boogaard
A Three-Invariant Cap Plasticity model with Kinematic and Anisotropic Hardening Rule for Powder and Granular Materials
A.R. Khoei, H. DorMohammadi
Review of Application of Numerical Methods to Identification Material Model of Hard Nanocoating
M. Kopernik, D. Szeliga, M. Pietrzyk
A Material Model for the Shape-Memory Effect as well as Super-Elastic Behavior and its Application in Medical Technology
W. Rust, D. Kardas
|
|
|
20:30 - 22:30
Welcome Reception
|
|
Thursday, September 6th
|
09:00 - 11:00
Plenary Lectures III
|
ThMP
Room: Auditorium
Chair: to be confirmed
|
Shape Memory Effects at Finite Strains of Cyclic Martensitic Phase Transformations in Monocrystals
E. Stein, G. Sagar
Multiresolution Mechanics and Ultra Large-Scale Multiscale Simulation of Nano/Micro-Structured Materiales
W.K. Liu, C. McVeigh, A. To, R. Tiang
Recent Advances and Validation of Upscaling of Viscoelastic and Strength Properties of Matrix-Inclusion Materials
J. Füssl, E.G. Aigner, R. Lackner, H.A. Mang
Multi-scale Finite Element Analyses of Material Process and Formability Test for Sheet Metal
E. Nakamachi
|
|
11:00 - 11:30
Coffee Break
|
|
11:30 - 13:30
TECHNICAL SESSIONS
|
Structural Masonry: Numerical Methods and Applications I
Invited Session organized by Pere Roca
|
ThM1
Room: VS201
Chair: to be confirmed
|
Analysis of Large Historical Masonry Structures by Generalized Matrix Formulation
C. Molins, P. Roca
Seismic Analysis of Masonry Monuments by an Integrated Approach that Combines the Finite Element Models with a Specific Mechanistic Model
F. Peña, S. Casolo, P.B. Lourenço
Seismic Modelling of a Masonry Chimney
F. Pallarés, S. Ivorra
Non Linear Modeling Procedures for the Seismic Assessment of Reggio Emilia Cathedral, Italy
F. Casarin, C. Modena
|
Multi-scale Computational Strategies for Damage Propagation and Evolving Discontinuities I
Invited Session organized by Olivier Allix, Ekkehard Ramm
|
ThM2
Room: VS213
Chair: to be confirmed
|
On the Use of DSDA and X-FEM for the Modelling of Discontinuities in Porous Media
J. Alfaiate, P. Moonen, L.J. Sluys
Recent Developments of a Multiscale Strategy: Recent Developments of a Multiscale Strategy for Crack Propagation and Delamination
O. Allix, P. Kerfriden, P. Gosselet
Numerical Applications of Distributed Damage in Confined Brittle Materials
A. Pandolfi, A. Mota, M. Ortiz
Finite Elements with Embedded Discontinuities and Dynamic Fracture
F. Armero, Ch. Linder
Multi-scale Strategies for Simulating Brittle Fracture in Metallic Materials
T. Luther, C. Könke
|
Multi-scale Modelling of Building Materials I
Invited Session organized by Herbert Mang, Josef Eberhardsteiner
|
ThM3
Room: VS214
Chair: to be confirmed
|
A Coordinate-Free Asymptotic Approach to Modelling Curved Interfacial Transition Zones in Cement-Based Materials
C. Bouby, Q.C. He, S.T. Gu, V. Pensée
A Coupled Two-Scale Computational Approach for Masonry Plates at Failure
T.J. Massart, B. Mercatoris
H-M Mesostructural Analysis of the Effect of Aggregates on the Drying Shrinkage Microcracking of Concrete
A. Idiart, C. Lopez, I. Carol
Coupling Techniques for Heterogeneous Multiscale Models of Concrete
S. Eckardt, C. Könke
Multi-scale Modelling as a Tool for Innovation in Material Science and Engineering
K. van Breugel
|
Prediction of Failure, Damage and Formability I
Invited Session organized by José César de Sá
|
ThM4
Room: VS215
Chair: to be confirmed
|
Evolution Damage Modelisation of Loaded Bearing Path
F. Bogard, P. Lestriez, Y.Q. Guo
3 D - Structural Analysis of CT - Specimen Covering Viscoplastic Deformation, Ductile Damage and Localization of the Deformation Field
J. Velde, U. Kowalsky, T. Zümendorf, D. Dinkler
Parameter Calibration in Non-Local Damage-Plasticity Modelling of Ductile Materials
J. Belnoue, P. Armitage, G. Nguyen, A. Korsunsky
Prediction of Failure, Damage and Formability in Forming Processes
J.M. César de Sá, A.D. Santos, P. Teixeira, C. Zheng
Accurate Hardening Modeling as Basis for the Realistic Simulation of Sheet Forming Processes with Complex Strain-Path Changes
V. Levkovitch, B. Svendsen
Macroscopic Strength Estimates for Ductile Three-Phase Fiber-Reinforced Composites
A. Taliercio
|
Computational Methods in Biomechanics and Mechanobiology III
Invited Session organized by Gerhard A. Holzapfel
|
ThM5
Room: VS216
Chair: to be confirmed
|
Modeling and Computational Aspects of Arterial Walls
D. Brands, J. Schröder, D. Balzani, A. Klawonn, O. Rheinbach
Cavity Detection and Crack Analysis in Biomechanics using BEM
B. Gámez, D. Ojeda, E. Divo, A. Kassab, M. Cerrolaza
A Multiphase Model of Biological Materials with Graded Porosity
T. Ricken, J. Bluhm
A Constituent-Based Computational Model for Vascular Remodelling of a Growing Cerebral Aneurysm
P. Vena, D. Gastaldi, L. Socci, G. Pennati, R. Contro
Micromechanical Modelling and Computational Testing of Skeletal Muscles
M. Böl, S. Reese
A Computational Approach for Stress Adaptive Bone Remodeling - A Comparative Study on Hip-Joint Endoprosthesis Design
U. Nackenhorst, A. Lutz
|
Numerical Modelling of Concrete Structures
Invited Session organized by Pavao Marovic
|
ThM6
Room: VS217
Chair: to be confirmed
|
Solid FE Mode for RC Structures with Inside Detailed Information
A. Ibrahimbegovic, L. Davenne, A. Boulkertous, P. Jehel
Proposal of the New Nonlinear Numerical Model of Reinforced Concrete Structures
M. Galić, P. Marović, Ž. Nikolić
Non-linear model of reinforced concrete beams exposed to fatigue from moving loading
I. Kožar, S. Mrakovčić
Stability and Regularisation of Finite Element Solutions of Damage Problems with Strain Smoothing
A. Jefferson, P. Lyons
Analysis of Uniaxial Tension Experiments on Concrete based on Continuum Micromechanics of Cracked Brittle Materials
B. Pichler, J. Burrus, C. Hellmich
Continuum Microviscoelasticity of Cementitious Materials: Upscaling Technique and First Experimental Validation
S. Scheiner, C. Hellmich
Influence of 3D Consitutive Laws on the Impact Response of a Concrete Slab
L. Jason, D. Guilbaud, S. Durand
|
|
Damage, Fracture & Fatigue I
|
ThM7
Room: VS218
Chair: to be confirmed
|
Crack Growth of 2D Small Scale Yielding Model under Variable Amplitude Loading
L.C. Ricardo, A.H. Andrade, K. Garcia, V. Gonçalves, L. Godefroid
The Force Method to Calculate Stress Intensity Factors for Arbitrary Meshes
A. Costa, R. Cardoso, J. Yoon, A. Morais
Fracture of Welded Plates: An Experimental and Numerical Study
G. Pape, A. Erkel
Fracture Mechanics of Rubber Materials: General Formulation and Application to Endochronic Plasticity
C. Morgner, M. Kaliske, B. Näser
Analysis of Microcracking in Ceramics Induced by Elastic Anisotropy using Discontinuous Galerkin Method
F. Stan
|
|
Advanced Material Models II
|
ThM8
Room: VS219
Chair: to be confirmed
|
Formulation and Calibration of a Crystal Plasticity Finite Element Model for HCP Polycrystals
S.Y. Zhang, X. Song, D. Dini, A. Korsunsky
Strain Gradient Plasticity Based Analysis of Transformation Induced Plasticity in Multiphase Steels
L. Mazzoni, T.J. Massart, T. Pardoen
Significance of the Choice of Conjugate Tensors on Fitting Stress-Strain Curves and Yield Surfaces
Z. Hruby, J. Plesek
Nonlocal Plasticity Applied to Bending of Beams
L. Strömberg
Design of Damage-Plastic Model for Quasi-Brittle Materials
J. Sýkora, J. Vorel, M. Šejnoha
Finite Element Simulation of Aluminium Sheet Warm Forming using Alflow Hardening Model
S. Kurukuri, A.H. van den Boogaard, J. Huétink
|
|
|
13:30 - 14:30
Lunch Break
|
|
14:30 - 16:30
Plenary Lectures IV
|
ThAP
Room: Auditorium
Chair: to be confirmed
|
Electronic Structure Calculation of Material Properties at the Macroscale
V. Gavini, K. Bhattacharya , M. Ortiz
Two-Scale Approaches for Fracture in Porous Media
R. de Borst, J. Réthoré, M-A. Abellan
Variational Principles for Dissipative Solids in Physical and Material Space: Implications to Computational Plasticity and Fracture
Ch. Miehe
Multidisciplinary Problems in Computational Fusion Technology
B.A. Schrefler, D.P. Boso, M. Lefik
|
|
16:30 - 17:00
Coffee Break
|
|
17:00 - 19:00
TECHNICAL SESSIONS
|
Structural Masonry: Numerical Methods and Applications II
Invited Session organized by Pere Roca
|
ThA1
Room: VS201
Chair: to be confirmed
|
Limit Analysis of Masonry Structures using Funicular Lines
P. Roca, A. Andreu, L. Gil
An Embedded Cohesive Crack Model for Finite Element Analysis of Mixed Mode Fracture of Brickwork Masonry
E. Reyes, J.C. Gálvez, D.A. Cendón, M.J. Casati, J.M. Sancho, J. Planas
Determination of Size Independent Fracture Energy for Regular Masonry
J. Vorel, J. Sýkora, M. Šejnoha
Heterogeneous and Homogenized FE Models for the Limit Analysis of Out-of-Plane Loaded Masonry Walls
G. Milani, P.B. Lourenço
Collapse of Masonry Vaults and Arches using Nonlinear Discrete Numerical Methods
R. Bravo Pareja, J.L. Pérez-Aparicio
|
Multi-scale Computational Strategies for Damage Propagation and Evolving Discontinuities II
Invited Session organized by Olivier Allix, Ekkehard Ramm
|
ThA2
Room: VS213
Chair: to be confirmed
|
Simulation of Ductile Damage and Fracture in Heterogeneous Materials with a Non-local Damage Model
F. Reusch, C. Hortig, B. Svendsen
Spacetime Discontinuous Galerkin Models for Multiscale Elastodynamic Fracture: Recent Progress
R. Abedi, M.A. Hawker, R.B. Haber
Multiple-Scale Analysis of Impact Fracture
R.R. Pedersen, A. Simone, L.J. Sluys
Nonlocal Description of the Damage and Failure of Stratified Composites
F. Feyel, N. Germain
Multi-Scale Modelling of Fracture in Piezoelectric Ceramics
C.V. Verhoosel, M.A. Gutiérrez, R. de Borst
|
Multi-scale Modelling of Building Materials II
Invited Session organized by Herbert Mang, Josef Eberhardsteiner
|
ThA3
Room: VS214
Chair: to be confirmed
|
Extraction of Crack Opening from a Nonlocal Damage Damage Field
G. Legrain, F. Dufour, A. Huerta, G. Pijaudier-Cabot
Multiscale Creep and Shrinkage Model for Early-Age Cement-Based Materials
C. Pichler, R. Lackner
Multiscale modelling of multiphysical problems in porous building materials
J. Carmeliet, P. Moonen, S. Mertens, L.J. Sluys
A Computational Homogenisation Approach for Cohesive Interfaces
C.B. Hirschberger, S. Ricker, P. Steinmann, N. Sukumar
Multi-Scale Characterization of Building Materials by means of High Resolution Scanning Electron Microscopy Imaging Techniques
B.E. Möser
|
Prediction of Failure, Damage and Formability II
Invited Session organized by José César de Sá
|
ThA4
Room: VS215
Chair: to be confirmed
|
Damage Models used for Prediction of Fractures in Metal Forming Prcesses
S H Zhang, W T Zheng, H W Song, X W Chen, M Cheng, Z T Wang
Finite Element Based Formability Predictions of Sheets Subjected to the Incremental Forming Process
P. Eyckens, S. He, A. Van Bael, J. Duflou, P. Van Houtte
Unit-Cell and Micropore Damage Models for Low-Cycle Fatigue Analysis of Ductile Metals.
J.H. Hommel, G. Meschke
Application of Non-local Damage Models to Sheet Forming Applications
H. H Wisselink, J. Huétink
|
Industrial Perspective of Numerical Forming Processes
Invited Session organized by Masayoshi Akiyama
|
ThA5
Room: VS216
Chair: to be confirmed
|
Transient Analysis of Long-product Rolling using Three-dimensional Rigid-plastic FEM
Y. Wada, S. Hayashi, K. Yamada
Meso-scale Analysis of Strain Distribution in Polycrystalline Metals using Digital Image Correlation Analysis
M. Yoshida, M. Akiyama
Deformable Micro Pillar Array with Magnetic Particles and Elastic Material
F. Tsumori, N. Miyano, A. Fukui, K. Sagawa, H. Kotera
Numerical Investigation on Bending Properties of Aluminum Sheet Subjected to Embossing on Both Sides
C. Namoco, R. Kuramatsu, T. Iizuka, N. Takakura
Thickness Optimisation of Axisymmetric Tube Extruded by a New Method using Tapered Mandrel
T. Kuboki, T. Makiyama, M. Murata
Characterization of Macroscopic Yield Strength of Polycrystalline Metals by Multiscale Metal Forming Analysis
K. Terada, H. Tabata, I. Watanabe, M. Akiyama
Study on Nonlinear Deformation of High-Porosity Porous Materials using Constitutive Equation Incorporating Phase Transformation
A. Sakuma, N. Azusawa, S. Nagaki
|
|
Innovative Computational Models I
|
ThA6
Room: VS217
Chair: to be confirmed
|
A Second-Order Model for Buckling Analysis of Elastoplastic Beams
A. L Ibán, J.M. Terán, E.L. Chica
Imperfect Bond Modelled by the FETI Method
J. Kruis, P. Štemberk
Double-Step Midpoint Methods for J2 Plasticity with Nonlinear Hardening
E. Artioli, F. Auricchio, L. Beirão da Veiga
Numerical Methods for the Complex Fuzzy-Random Analysis of Uncertainty in Structure Design
Z. Kala
A Novel Class of Error Estimate Free Adaptive Finite Element Formulations for Standard Dissipative Solids at Finite Strains
J. Mosler, M. Ortiz
Fully automatic 2D hp-adaptive Finite Element Method for Non-Stationary Heat Transfer
P.J. Matuszyk, M. Paszynski
A Hysteretic Tensile-Compressive Cyclic Constitutive Model for Damaging Wet Concrete
S. Mertens, J. Carmeliet, J. Vantomme
|
|
Damage, Fracture & Fatigue II
|
ThA7
Room: VS218
Chair: to be confirmed
|
Microscopic Energy Dissipation and Fatigue Crack Initiation in Polycrystalline Metallic Alloys
X. Song, S.Y. Zhang, D. Dini, A. Korsunsky
Adaptive Strategies for Explicit 3D Crack Propagation Simulations in Brittle Materials by Means of a Mixed Continuous-Discontinuous Model
S.H. Reese, P. Wriggers
Experimental and Numerical Dynamic Ductile Damage Analysis of Inflator Structure
H. Fresnel, P. Longère, V. Grolleau, G. Rio, P. Hardy
Predicting the Interfacial Delamination in Polymer Coated Metal Sheet during Deep-Drawing
M. van den Bosch, P. Schreurs, M. Geers
The Simulation of Elastic–Plastic Degradation of Concrete as a Result of Corrosion
T. Krykowski
Modelling of Cohesive Fracture Processes by Intra-Element Discontinuities
M. Cuomo, L. Contrafatto, M. Miccichè
|
|
Advanced Material Models III
|
ThA8
Room: VS219
Chair: to be confirmed
|
Adapted Material Model for the Numerical Determination of Martensite Evolution during Deep Drawing Processes
B.A. Behrens, K. Voges-Schwieger, K. Weilandt
A Stress Integration Algorithm for Phase Transforming Materials
E.S. Perdahcioglu, H.J. Geijselaers, J. Huétink
Dislocation Density Based Constitutive Model for Ti-6Al-4V: Including Recovery and Recrystallisation
B. Babu
Analysis of Concrete Slab during Construction
P. Štemberk, J. Kruis, M. Frantová
A Dislocation Based Material Model for Warm Forming Simulation
B. Berisha, P. Hora, F. Vanini, L. Tong
Plasticity with Non-local Damage Formulation: Industrial Applications
A. Krayani, F. Dufour, G. Pijaudier-Cabot
|
|
|
20:30 - 23:00
Conference Dinner
|
|
Friday, September 7th
|
09:15 - 11:00
Plenary Lectures V
|
FrMP
Room: Auditorium
Chair: to be confirmed
|
Hierarchical Multiscale Model for Localized Failure in Heterogeneous Solids
E. Ramm, T. Hettich, A. Hund
Homogeneization of heterogeneous and Granular Material using Finite and Discrete Elements
P. Wriggers, M. Hain, C. Wellmann, I. Temizer
To be announced
D. Peric
|
|
11:00 - 11:30
Coffee Break
|
|
11:30 - 13:30
TECHNICAL SESSIONS
|
Heterogeneities in Plasticity and Damage
Invited Session organized by Adnan Ibrahimbegovic, Hermann Matthies
|
FrM1
Room: VS201
Chair: to be confirmed
|
FE Computational Algorithmes for Nonlinear Inelastic Behavior of Heterogeneous Materials
A. Ibrahimbegovic, D. Brancherie, J-B. Colliat, A. Kucerova, S. Melnyk, D. Markovic
A Computational Approach for Probabilistic Laws Identification of Heterogeneous Materials Plastic Behavior Properties
M. Hautefeuille, S. Melnyk, J-B. Colliat, H.G. Matthies, A. Ibrahimbegovic
A Spectral Stochastic Finite Element Analysis of Delamination in Fibre-Metal Laminates
D.B. Chung, M.A. Gutiérrez
Formulation of a Heterogeneous Stochastic Elasto-Plastic Material
B. Rosic, H.G. Matthies, M. Zivkovic, A. Ibrahimbegovic
The Theory of Plasticity Involving Micro Strains: Formulation and Application
Y. Chernyakov, V. Shneider
|
Cutting & Forming
Invited Session organized by Miguel Vaz Jr.
|
FrM2
Room: VS213
Chair: to be confirmed
|
Improving the Accuracy of Numerical Investigations of Sheet Metal Processes by Coupling a Process FE-Analysis and a Machine Simulation
B.A. Behrens, M. Ahrens, J. Poelmeyer
Simulation of Mechanical Cutting using a Material Model based on Dislocation Density
A. Svoboda, L-E. Lindgren, D. Wedberg, V. Kalhori, M. Lundblad
New Trends and Advancements in Metal Machining Simulation
M. Vaz Jr.
|
Multi-scale Modelling of Building Materials III
Invited Session organized by Herbert Mang, Josef Eberhardsteiner
|
FrM3
Room: VS214
Chair: to be confirmed
|
A Two-Scale Model for Cyclic Mode I Loading of Quasi-Brittle Materials
P. Moonen, S. Mertens, L.J. Sluys, J. Carmeliet
Multi-scale Homogenization of Cement-based Materials
Z. Bittnar, V. Šmilauer
Homogenization of Strength, Fatigue and Creep Durability of Periodic Composites with Periodic Structure
J. Orlik, S.E. Mikhailov
Theoretical Study of Methods used to Determine Ionic Diffusion Coefficients in Concrete using Migration Tests
P. Pivonka, G. Narsilio, D. Smith, R. Li
Relating Elastic Properties of Wood to Solid-Type and Plate-Type Microstructural Deformations: Application of a Multistep Homogenization Scheme
K. Hofstetter, C. Hellmich, J. Eberhardsteiner
|
Analysis, Optimization and Process Design of Sheet Metal Forming Parts I
Invited Session organized by Jean Louis Batoz, Hakim Naceur
|
FrM4
Room: VS215
Chair: to be confirmed
|
Enhanced Formulation of a Combined Hardening for Stamping and Springback Simulation
J. Carbonniere, F. Sabourin, L. Phan, A. KanjiNanji, B. Lenne, G. Philip
Application of Kriging Method for Shape Optimization of Sheet Metal Forming Tools
M. Oudjene, N. Lebaal, L. Ben-Ayed, J.L. Batoz
Determination of the Forming Machine Properties in a Machine Model for a Coupled Simulation
B.A. Behrens, M. Ahrens, J. Poelmeyer
Investigation on Solution Method Enhancements for Incremental Forming Simulations by Adapted Algebraic Multigrid
S. Bauer, F. Schmid, M. Schäfer
|
|
Industrial Applications I
|
FrM5
Room: VS216
Chair: to be confirmed
|
Mathematical Modelling of Squeeze Moulding and Comparison of Results by using Industrial Computer Tomography (iCT)
A. Kadauw, J. Bast, D. Fiedler, I. Betchvaia, H.C. Saewert
Structural Response of Unstiffened Panels under Close-in Blast Loading
M.D. Tyler-Street, J.M. Luyten, J. Mediavilla Varas
Simulating the Plastic Bending of Innovative Tube Connections
M. De Strycker, K. Vanden Hautte, D. Debruyne, W. Van Paepegem
Local Shakedown Analysis in Regions of Holes in High-Pressure Vessels
A.P. Zielinski, G. Widlak
Low-Cycle Fatigue of High-Pressure Vessels Subject to Thermal Loads
G. Widlak, A.P. Zielinski
|
|
Multi-body and Non-linear Dynamics
|
FrM6
Room: VS217
Chair: to be confirmed
|
Conservation Properties of Galerkin-Based Time-Stepping Schemes for Finite Elasto-Plasto-Dynamics
R. Mohr, A. Menzel, P. Steinmann
Vulnerability Analysis of a Water Castle
S. Ginju, M. Ieremia, O. Cartoafa, R. Nica
|
|
Geomechanics II
|
FrM7
Room: VS218
Chair: to be confirmed
|
Some Aspects of DE/FE Combined Method : Model Identification and Combined Method
J. Rousseau, E. Frangin, Ph. Marin, L. Daudeville
Hydrofracture Modelling of Quasi-Brittle Materials using Zero-Thickness Interface Elements
J.M. Segura, I. Carol
Critical State of Fabric in Granular Material and Micromechanical Modelling with Buckling of Microstructure
K. Maeda, T. Matsumoto
DEM / FEM Computation of Excavation Processes
J. Rojek, E. Oñate, C. Labra, H. Kargl
Micromechanical Analysis of the Rock Sanding Problem in Oil Perforations
D. Garolera, C.M. López, I. Carol
Numerical Modelling of Formation and Propagation of Drying Cracks in Soils
H.U. Levatti, P. Prat, A. Ledesma
|
|
|
13:30 - 14:30
Lunch Break
|
|
14:30 - 16:30
TECHNICAL SESSIONS
|
|
Dynamics and Contact
|
FrA1
Room: VS201
Chair: to be confirmed
|
Development of Plastic Regions in Underground Structures under Dynamic Loading
P.P. Prochazka
A 3D Contact Model for Numerical Analysis of Dynamic Systems
S.A. Schwindt, N. Petrinic, B.CF Elliott
Numerical Modeling of Large Deformation Frictional Contact with the Extended Finite Element Method
M. Anahid , I. Yadegaran , A.R. Khoei
|
|
Advanced Material Models IV
|
FrA2
Room: VS213
Chair: to be confirmed
|
Gradient Plasticity with Deffuse Boundary Derived from Continuum Mixture Theory
L. Strömberg
A Proposal of Constitutive Telations of SMA Material Subjected to Dynamic Loads
W. Grzesikiewicz, A. Zbiciak
Computational Aspects of Two-Scale Modeling of Blood Perfused Tissues
E. Rohan, R. Cimrman
A Coupled Viscoplastic-Damage Model for Cement-Bone Interfaces
P. Moreo, J.M. García-Aznar, M. Doblaré
Improved Mixture Rules for the Composite (FGM‘s) Sandwich Beam Element
J. Murín, V. Kutiš
|
|
Damage, Fracture & Fatigue III
|
FrA3
Room: VS214
Chair: to be confirmed
|
Optimal Design of Notched Machine Parts with Respect to Fracture and Low Cycle Fatigue
B. Wilczynski, Z. Mróz
Experimental and Numerical Investigations for an Optimum Relative Clearance in Blanking
B-A. Behrens, M. Kamp, K.B. Sidhu
Poromechanical Modelling of Hygric Shrinkage and Crystallization Swelling in Layered Porous Materials
H. Derluyn, A.S. Poupeleer, P. Moonen, J. Carmeliet
Semi-elliptical Single or Multi-Crack Propagation under Thermomechanical Variable Amplitude Loading
A. Sbitti, S. Taheri, E. Galenne
|
Analysis, Optimization and Process Design of Sheet Metal Forming Parts II
Invited Session organized by Jean Louis Batoz, Hakim Naceur
|
FrA4
Room: VS215
Chair: to be confirmed
|
A Numerical Approach for the Design of High Precision Metallic Parts Obtained by Stamping
M. Azaouzi, H. Naceur, A. Delamézière, J.L. Batoz
Analysis of Industrial Sheet Metal Forming Processes using an Enhanced Rotation-Free Basic Shell Triangle
L. Neamtu, F. Flores, E. Oñate
New Consideration of Controlled Anisotropy for the Fast Formiing of Decorated Food Cans
H. Naceur, A. Delamézière, J.L. Batoz
Sensitivity Analysis of Process Parameters in the Stamping of Thin Metallic Packaging Containers
T. Sedrat, B. Barkat, M.C. Bendaas
Analysis of the Thinning Phenomenon Variations in Sheet Metal Forming Process
F. Abbassi, O. Pantalé, A. Zghal, R. Rakotomalala
|
|
Industrial Applications II
|
FrA5
Room: VS216
Chair: to be confirmed
|
A Numerical Study of Influence of the Indenter Geometry on Depth Sensing Indentation Results
N.A. Sakharova, J.V. Fernandes, J.M. Antunes, M.C. Oliveira
A Numerical Model of Light Adjustable Lens
A. Pandolfi, M. Ortiz
Stude for Design and Identification of a Bolted Joint Model
M. Cloirec, P.A. Boucard, L. Champaney, S. Guinard, J. Sen Gupta
Numerical and Experimental Analyses of Steel Members Connections
M. Bajer, Š. Řepa, J. Kala
Normalization Factor for T•Log(t/τ0) Scaling of Thermal Depending Properties of Heat Treatable Aluminium Alloys
J. Llumà, J. Jorba
Reliability Analysis of Steel Structures Focused on Semi-probabilistic Design Concept of Eurocodes
Z. Kala, A. Omishore
Numerical Modeling of Steel Chemical Members
M. Bajer, J. Kala, J. Barnat
|
|
Innovative Computational Models II
|
FrA6
Room: VS217
Chair: to be confirmed
|
Higher Order Discretization Concept for 3D Multifield Analyses of Cracked Concrete Structures
S. Jox, Ch. Becker, G. Meschke
A Computational Technique for Calculating Plasticity-Induced Crack Closure in Plates of Finite Thickness
J. Codrington, A. Kotousov, A. Blazewicz
Application of the Method of Characteristics to Finding the Strain Rate Intensity Factor
E. Lyamina
Error Control and Time-Sequential Adaptive Technique for the Visco-Plasticity Problem
F. Larsson, K. Runesson
3D Modeling of Large Elasto–plastic Deformation via the Extended Finite Element Method
A.R. Khoei, S.O. Biabanaki , M. Anahid
A Simplified Second Gradient Brittle Materials for Solving Hydro-Mechanical Coupling Problems
R. Fernandes, C. Chavant, R. Chambon
|
Multi-scale Constitutive Modelling: Theory and Applications
Invited Session organized by Eduardo de Souza Neto, Djordje Peric, R. Feijoo
|
FrA7
Room: VS218
Chair: to be confirmed
|
Second-order Computational Homogenisation: Scale Transition and Enforcement of RVE Boundary Conditions
L. Kaczmarczyk, C.J. Pearce, N. Bicanic
Computational Strategies for Multi-scale Analysis of Solids: Small and Large Strain Formulations
D.D. Somer, E.A. de Souza Neto, W.G. Dettmer, D. Peric
An Optimisation Based Procedure for the Characterisation of Macroscopic Constitutive Functions for Materials with Hyperelastic Microstructures
D.C. Speirs, E.A. de Souza Neto, D. Peric
Dislocation Nucleation and Defect Structure during Nanoindentation: An Analysis by Means of a Novel Quasicontinuum Method
B. Eidel, A. Stukowski
Physically-Based Crystal Plasticity Modelling of GND Distributions in a Bicrystal and in Nanoindentation
H. Liang, F.P. Dunne
|
|
|
16:30 - 17:30
Farewell Cocktail
|
|
