|
Wednesday, October 9th
|
|
11:30 - 13:30
REGISTRATION
|
|
|
13:30 - 14:00
OPENING SESSION
|
|
14:00 - 15:30
PLENARY LECTURES
|
WeMP1
Room: N1080
Chair: to be confirmed
|
Material "know-how" for Analysis, Design and Manufacture
P.D. Gosling, B.N. Bridgens , N.J. Bartle, A.G. Colman and C.N. Iliffe
High tension - Tensile Architecture
K. Göppert
Solar Thermal Building with Seasonal Heat Storage System
T. Stegmaier, J. Sarsour and G. Gresser
|
|
15:30 - 16:00
COFFEE BREAK
|
|
16:00 - 18:20
TECHNICAL SESSIONS
|
IS - ADVANCED METHODS FOR ANALYSIS OF TENSILE STRUCTURES I
Invited Session organized by Falko Dieringer, Roland Wüchner and Kai-Uwe Bletzinger
|
WeA1OI
Room: N1080
Chair: to be confirmed
|
Membrane Structure Design – the state of the art
M. Birchall, J. Renold-Smith, H. Trumpf and J. von Bergmann
RhinoMembrane v 2.0 & Grasshopper
G. D‘Anza
The eXtended Updated Reference Strategy for the Form Finding of Tensile Structures
F. Dieringer, R. Wüchner and K.-U. Bletzinger
Engineering of Flat Shaped Membranes
L. Schoene and F. Weininger
Implementation of a Simple Wrinkling model into Argyris‘ membrane Finite Element
R.M. Pauletti and D.M. Guirardi
Conception and Design of Membrane Structures considering their Non-Linear Behavior.
B. Philipp, R. Wüchner and K.-U. Bletzinger
Optimized Cutting Pattern Generation for Membrane Structures made of Textile Fabrics
A. Widhammer, R. Wüchner and K.-U. Bletzinger
|
IS - MEMBRANE MATERIALS - MANUFACTURE, TESTING & MODELLING
Invited Session organized by Benjamin Bridgens and Ever Barbero
|
WeA2OI
Room: N1070
Chair: to be confirmed
|
Friction and Leakage Characteristics of Confined, Reduced-Scale Inflatable Structures
J.J. Sill, K.H. Means, E.M. Sosa and E.J. Barbero
Spectra of Computed Fabric Stress and Deformation Values due to a Range of Fictitious elastic Constants Obtained from Different Established Determination Procedures
J. Uhlemann and N. Stranghöner
Implementation of a Neural Network Material Model for the Analysis of Fabric Structures
N.J. Bartle, P.D. Gosling and B.N. Bridgens
A Predictive Model for the Design of Functional Textiles
C.N. Iliffe, B.N. Bridgens and P.D. Gosling
A Predictive Biaxial Meso-Mechanical Model for Characterising Architectural Fabrics
A.G. Colman, P.D. Gosling and B.N. Bridgens
Testing of Full-Scale Confined Inflatables for the Protection of Tunnels
E.J. Barbero, E.M. Sosa and G.J. Thompson
|
IS - MEMBRANES IN ENVIRONMENT - 16:00 - 17:20
Invited Session organized by Rosemarie Wagner
|
WeA3OI
Room: N1090
Chair: to be confirmed
|
Yarn Level Modelling of Textiles for Membranes
Y. Kyosev
Formfinding and Statical Analysis of Cable Nets with flexible Covers
J. Holl, D. Ströbel and P. Singer
New Developments for the Determination of Material Properties of Tensile Structures
K. Heinlein and R. Wagner
Textile Coverings for Circular Tanks in Environmental Technology
M. Karwath and R. Wagner
|
IS - BUILDING PHYSICS OF MEMBRANE STRUCTURES - 17:20 -18:20
Invited Session organized by Mike Sieder and Andreas Kaufmann
|
WeA4OI
Room: N1090
Chair: to be confirmed
|
Thermotechnical Optimization of Membrane Clamp Profiles Regarding Statical and Assembly Engineering Aspects
B. Urban, M. Sieder and I. Heusler
Introduction to a Calorimetric in Situ Full Scale Test Facility for the Energy Performance of Transparent Building Components
M. Kersken
Textile and Film Based Building Envelopes – Lightweight and Adaptive
F. Schmid, W. Haase and W. Sobek
|
|
|
18:30 - 21:00
WELCOME RECEPTION
|
|
Thursday, October 10th
|
08:30 - 10:00
PLENARY LECTURES
|
ThMP1
Room: N1080
Chair: to be confirmed
|
Folding Tensioned Membranes
M. Mollaert
Soft-Matrix Composite Materials and Structures
S. Pellegrino
FSI Modeling of Ringsail Parachutes With Disreefing and Modified Geometric Porosity
K. Takizawa, M. Fritze, D. Montes and T.E. Tezduyar
|
|
10:00 - 10:30
COFFEE BREAK
|
|
10:30 - 12:30
TECHNICAL SESSIONS
|
IS - FLUID-STRUCTURE INTERACTION AND WIND ENGINEERING I
Invited Session organized by Roland Wüchner and Kai-Uwe Bletzinger
|
ThM1OI
Room: N1080
Chair: to be confirmed
|
Wind Engineering of Large Span Membrane Structures
A. Michalski, D. Britto, E. Haug, P. Gelenne and R. Wüchner
Numerical Analysis of Aeroelastic Characteristics of Airship Envelope
H.F. Tan, L.Y. Yang and J.Z. Wei
On Partitioned Solution Strategies for Fluid-Membrane Interaction
W. Dettmer and D. Peric
Kitepower: Renewable Energy with Flying Membranes
R.H. Luchsinger
Comparison Between Full-Scale and Sub-Scale Parachutes
K. Takizawa, J. Boben, Y. Tsutsui and T.E. Tezduyar
|
IS - ETFE Foils
Invited Session organized by Karsten Moritz and Lars Schiemann
|
ThM2OI
Room: N1070
Chair: to be confirmed
|
Effect of Cushion Geometry and Configuration on the Embodied Energy of ETFE foil Construction
J. Chilton, S.A. Pezeshkzadeh and S. Afrin
On the mechanical behaviour of ETFE-films: Elastic Range, Yielding conditions, Hardening, Break and the Influence on the Analysis of ETFE-structures
H. Boegner-Balz, R. Blum and J. Koehnlein
ETFE Modules for new San Mamés stadium in Bilbao
F. Reitsma and C. Cemeli
Design recommendations for ETFE Foil Structures
R. Houtman
ETFE Roof Structure in Combination with Flexible Solar Cells
W. Pösl
Novel BIPV/T ETFE Cushion
W.J. Chen, J.H. Hu and H. Song
|
IS - ADAPTIVE MEMBRANE STRUCTURES - 10:30 - 11:50
Invited Session organized by Mike Sieder and Annette Bögle
|
ThM3OI
Room: N1090
Chair: to be confirmed
|
Reusable Construction Systems & Sustainability
S. Draeger
Responsive Textiles
E. Vlasceanu, J. Lienhard and J. Knippers
The "Magical" Lleida Technological Park: as an example of environmental building rehabilitation strategy
F. Pich-Aguilera, P. Casaldàliga and O. Popovici
Adaptable Lightweight Structures to Minimise Material Use
A.P. Habraken
|
IS - RAPID DEPLOYABLE TENSILE STRUCTURES - 11:50 - 12:30
Invited Session organized by Arno Pronk
|
ThM4OI
Room: N1090
Chair: to be confirmed
|
Multifunctional Adaptive Façade at IBA 2013; design Studies for an Integral Energy Harvesting Façade Shading System
J. Lienhard, J. Riederer, H. Jungjohann, M. Oppe and J. Knippers
Kinetic Geiger Dome with Photovoltaic Panels
A.D. Pronk, J.B. da Conceicão van Nieuwenhuizen and M.M. Dominicus
|
|
|
12:30 - 13:30
LUNCH BREAK
|
|
13:30 - 15:30
TECHNICAL SESSIONS
|
IS - DETAILING - CASE STUDIES - INSTALLATION PROCESS I
Invited Session organized by Josep Llorens
|
ThA1OI
Room: N1080
Chair: to be confirmed
|
Central Courtyard Cover Departmental Educational Institution
S. Gonzalez, J. Gonzalez and N. Torres
Removable Insulated Aircushion Roof for Swimming Pool
R. Houtman
Structural Membranes in Mexico: Two Case Studies
J.G. Oliva Salinas and E. Valdez Olmedo
Advantages of Lightweight Tensioned Coated Fabrics and Foils Façades for the Building Sector
P. Beccarelli and J. Chilton
Design and Consturction of Thermally Insulated Tensile Membrane Structures Using Tensotherm Composite
D. Campbell and M. Augustyniak
|
IS - ACTIVE BENDING – STIFFENING OF MEMBRANE STRUCTURES BY ELASTICALLY DEFORMED ELEMENTS
Invited Session organized by Jan Knippers and Christoph Gengnagel
|
ThA2OI
Room: N1070
Chair: to be confirmed
|
Construction of Gridshells Composed of Elastically Bent Elements and Covered by Stretched Three-dimensional Membranes
F. Tayeb, J.F. Caron, O. Baverel and L. Du Peloux
Restraining Actively-bent Structures by Membranes
H. Alpermann and C. Gengnagel
Form-Finding and Analysis of Bending-Active Systems Using Dynamic Relaxation
S. Adriaenssens and L. Rhode-Barbarigos
Finite Element Modelling in Integral Design Strategies of Form- and bending-active Hybrid Structures
J. Lienhard, S. Ahlquist, A. Menges and J. Knippers
Form Finding and Analysis of Bending-active Membrane Structures
T. Van Mele, D. Veenendaal, L. De Laet and P. Block
|
|
CS - NEW MEMBRANE MATERIALS AND TESTING METHODS
|
ThA3O
Room: N1090
Chair: to be confirmed
|
New Developments in Tensairity and Lightweight Membrane Structures
C. Galliot and R.H. Luchsinger
Thermal and Mechanical Properties of Structured Thin Films with Tunable, Ultra-low Thermal Expansion
C. Daraio, N. Yamamoto and E. Gdoutos
Application of the Flexometer‐Test on Membrane Fabric used for Retractable Membrane Structures
J. Heidrich
Failure of Polyethylene Thin Film Membrane Structures
D. Hegyi, S. Pellegrino and J. Li
|
|
|
15:30 - 16:00
COFFEE BREAK
|
|
16:00 - 18:20
TECHNICAL SESSIONS
|
IS - DETAILING - CASE STUDIES - INSTALLATION PROCESS II
Invited Session organized by Josep Llorens
|
ThE1OI
Room: N1080
Chair: to be confirmed
|
Different Membranes, Different Methods
F. Reitsma and C. Cemeli
Selected Examples for the Optimisation of Cutting Patterns for Textile Membranes
D. Ströbel, L. Gründig and P. Singer
Tension Anchors for Structural Membranes
J. Llorens
Architectural Design of Membrane Lightweigt Structures and the Consideration of Building Costs
R. Wehdorn-Roithmayr and R. Giraldo
Low-tech or High-tech? “Cut.enoid.tower” - Three times two Facets of Irregularity
G. Filz
BATenso New Textile Façade Framing System: Development, CFD Wind Analysis Optimization and Application to the “Oasis” Hotel Aesthetical Refurbishing and Climatic Improvement
J. Tejera
Case Study Terra Alta Sky Lounge Membrane Structure in El Salvador Central America
C. Armendariz
|
IS - ADVANCED METHODS FOR ANALYSIS OF TENSILE STRUCTURES II
Invited Session organized by Falko Dieringer, Roland Wüchner and Kai-Uwe Bletzinger
|
ThE2OI
Room: N1070
Chair: to be confirmed
|
From NURBS to Textile Architecture
B. Stimpfle
An Energy Based Geometric Construction for the Bézier-Enhanced Shell Triangle (BEST) Finite Element
P.-A. Ubach, E. Oñate and J. García-Espinosa
Code Verification Examples of a Fully Geometrical Nonlinear Membrane Element using the Method of Manufactured Solutions
R. Fisch, J. Franke, R. Wüchner and K.-U. Bletzinger
Comparing Form Finding Methods for Minimal Surfaces
D. Veenendaal and P. Block
Post-hardening Behavior of ETFE Foils in Pneumatically Prestressed Membrane Constructions
F. Weininger, L. Schoene and R. Mesnil
Experiences on the Implementation of a Nonlinear Material Model for Membrane Fabrics in a Finite Element Program
J. Bellmann
Using NURBS as Response Surface for Membrane Material Behaviour
M. Coelho, D. Roehl and K.-U. Bletzinger
|
|
CS - DESIGN AND CONSTRUCTION METHODS I
|
ThE3O
Room: N1090
Chair: to be confirmed
|
LOOPs & LOOPs2.0 - Evolutionary Design of a Lightweight Pavilion
L. Meeß-Olsohn
Radom Raisting – Overhaul of an industrial monument
R. Barthel, H. Maus, J. Rehm and J. Tutsch
Experiences in the Design, Analysis and Construction of Inflatable Structures of Small and Large Size
J. Marcipar and E. Oñate
Producing Optimized Structures with Inflatables
A.D. Pronk, M.M. Dominicus, S.H. Van Dijck and W.J. Van de Koppel
Stress Analysis of Inflated Polyhedra for the 32-panel Soccer Ball
A. Lengyel and K. Hincz
|
|
|
20:00 - 23:00
Conference Banquet
|
|
Friday, October 11th
|
08:30 - 10:50
TECHNICAL SESSIONS
|
IS - FLUID-STRUCTURE INTERACTION AND WIND ENGINEERING II
Invited Session organized by Roland Wüchner and Kai-Uwe Bletzinger
|
FrM1OI
Room: N1080
Chair: to be confirmed
|
Numerical Simulation on Mean Wind Pressure of Tensile Membrane Structures
Y. Sun and X.Y. Sun
Aeroelstic Wind Tunnel Tests on 2D Membrane Structure
X.Y. Sun and Y. Wu
Wind-structure Interaction Simulations for the Prediction of Ovalling Vibrations in Silo Groups
J. Hillewaere, J. Degroote, G. Lombaert, J. Vierendeels and G. Degrande
A Computational Formulation for Constrained Solid and Liquid Membranes Considering Isogeometric Finite Elements
R. Sauer, T. Duong and C. Corbett
Investigation on the Aeroelastic Behaviors of Tension Structures
Y. Wu and X.Y. Sun
|
IS- ENGINEERING AND DEVELOPMENT OF MEMBRANE STRUCTURES FOR SPACE APPLICATIONS
Invited Session organized by Leri Datashvili and Sergio Pellegrino
|
FrM2OI
Room: N1070
Chair: to be confirmed
|
Mesh Reinforced Membrane and its Wrinkling Characteristics
C. Wang, L. Zhang, H.F. Tan and Z.M. Wan
Towards Large Deployable High Precision Antennas with Dimensionally Stable and Multifunctional Shell-membranes
L. Datashvili, H. Baier and S. Endler
High Precision Large Space Structures: Challenges in Cable Networks Design
B. Wei, D. Magner, S. Endler, H. Baier and L. Datashvili
Deformation Measurement and Analysis of an Airship Model Made of Coated Fabric using Digital Image Correlation
G.C. Lin, H.F. Tan and Z.M. Wan
Large Planar Membrane Structures for High Precision Space Instruments and Telescopes
H. Baier and L. Datashvili
Effects of Boundary Deviations on Shape Accuracy of Inflatable Parabolic Antennas
B.B. San, X.F. He and Z.Q. Zhu
Deformation Analysis of Rectangular Composite Flexible Membrane of the Photovoltaic Space Solar Array
E.V. Morozov and A.V. Lopatin
|
|
CS - DESIGN AND CONSTRUCTION METHODS II
|
FrM3O
Room: N1090
Chair: to be confirmed
|
Behavior of One – Way Concrete Slabs with Edge Beams Reinforced/Strengthened by CFRP Rods under Uniformly Distributed Load
N. Alwash and H. Al-Nafakh
Computational Homogenization of Heterogeneous Technical Textiles
S. Fillep, J. Mergheim and P. Steinmann
Membrane Form Finding by Energy Minimization
R. Bouzidi and A. Le Van
Multiscale Effects in Gradient Deformation Model of a Membranes
S.A. Lurie and N.P. Tuchkova
Experimental Research and Numerical Analysis of Beam String- Inflatable Membrane Structure
C. Zhenggang, S. Ying and F. Feng
Modeling of Synthetic Fiber Ropes
Ş. Özüpek and U. Akalp
Theory and Experiment Research on the Static Capability and Dynamic Property of Inflatable Beams
Y.L. He, Y.F. Chen and W.J. Chen
|
|
|
11:00 - 11:30
COFFEE BREAK
|
|
11:30 - 12:30
PLENARY LECTURES
|
FrAP2
Room: N1080
Chair: to be confirmed
|
The Olympic Roofs 1972: The impossible comes true
K. Linkwitz
Advanced Methods for the Coupled Simulation of Membrane Systems: Towards a Virtual Wind Tunnel
R. Rossi
|
|
12:30 - 13:30
Farewell Lunch
|
|
