Isogeometric phase-field modeling of brittle and ductile fracture
M.J. Borden, T.J.R. Hughes* and C.M. Landis

Computational inelasticity at different scales – FE technology and beyond
S. Reese*, J. J. Kochmann, A. Radermacher and S. Wulfinghoff

Computational design of engineering materials: an integrated approach for multi-scale topological structural optimization
J. Oliver*, J.C. Cante and A. Ferrer

Linking mesoscale plasticity to atomistics
D.M. Kochmann*

Computational modelling of dynamic crack propagation
C.J. Pearce*, H. Al-Budairi and L. Kaczmarczyk

The experience of implementing, validating and supporting a state-of-the-art concrete model in the commercial finite element suite LUSAS
P. Lyons*, R. Tenchev, G. Cole and S. Rhodes

A quasi-linear Reproducing Kernel Particle Method for modeling brittle material damages under strong dynamics
E. Yreux* and J.S. Chen

An improved partition of unity-based mesoscopic masonry model
B. Vandoren* and H. Degée

Influence of interface zone behaviour in reinforced concrete under tension loading: An analysis based on modelling and digital image correlation
N. Handika*, G. Casaux-Ginestet and A. Sellier

Application oriented failure modeling and characterization for polymers in automotive pedestrian protection
H. Staack*, D. Seibert and H. Baier

Modelling and finite element simulation for FDSC multi-point forming based on ABAQUS
W. Wang*, B. Jia, T. Sun, H. Di and C. Zhao

Numerical modeling of low velocity impact of thin metallic structures using shell finite element enriched by interpolation covers
W. Arif*, H.  Naceur, N.  Leconte and E.  Markiewicz

High-velocity impact of micro- and nanoparticles with metal surface: continuous and atomistic modelling
A.E. Mayer*, V.S. Krasnikov and E.N. Borodin

A mixed strain/displacement finite element formulation suitable for fracture computation in large-deformation coupled CFD/CSD blast and impact problems
O.A. Soto*, J.D. Baum and R. Löhner

Advanced Material Model for shear cutting of metal sheets
F. Gutknecht*, F. Steinbach, T. Clausmeyer and A.E. Tekkaya

The prediction of texture evolution and plastic anisotropy after asymmetric rolling and annealing of aluminium alloys
A. Van Bael*, D.  Shore, J. Gawad, D. Roose, T. Nguyen-Minh and L. Kestens

Comparison of bifurcation analysis and maximum force criteria in the prediction of necking in stretched metal sheets
F. Abed-Meraim*, R.H.J. Peerlings and M.G.D. Geers

Lagrangian and arbitrary lagrangian eulerian simulations of roll forming processes
Y. Crutzen, R. Boman, L. Papeleux and J.P.  Ponthot*

On the constitutive modelling and friction laws used for the numerical simulation of Friction Stir Welding process
N. Dialami*, M. Chiumenti, M. Cervera and C. Agelet de Saracibar

A multiscale model for FRC composites
J. Timothy, Y. Zhan and G.  Meschke*

Constitutive modelling of plain and fibre reinforced concrete based on micromechanical solutions
I.C. Mihai*, A. Jefferson and P. Lyons

Reduced kinematic formulation based on the strong discontinuity method for reinforced concrete components
E. Kishta*, B. Richard, C. Giry and F. Ragueneau

How can classical structural analysis of a displacement-monitored segmented tunnel increase our insight into the structural performance?
J.L. Zhang*, B. Pichler and H.A. Mang

Prediction of mechanical properties of fiber reinforced concrete by means of a stochastic multiscale model
X. Jia, X. Guan and H.A. Mang*

Actin networks: continuum formulation and computational analysis
G. Holzapfel*

Calculation of optimal bounds on the failure probability in overstretched arteries
D. Balzani*, T. Schmidt and M. Ortiz

On a two-scale function-perfusion model for fatty liver
T. Ricken, D.Q.  Werner*, H-G.  Holzhütter, M. König, U. Dahmen and O. Dirsch

Customized finite element modelling of the human cornea
I. Simonini and A. Pandolfi*

Computation of eigenstresses in three-dimensional patient-specific arterial walls
M. von Hoegen* and J. Schröder

Simulation of mitral valve layer-specific stresses and their relation to interstitial cell deformation under physiological loading
C.H. Lee, W. Zhang and M.S. Sacks*

Biomechanics and computational modeling of the impact response of the knee
E.M. Arruda*

Modelling the residual stress of autofrettaged thick-walled common rails using isotropic and kinematic metal plasticity models compared to X-ray diffraction analysis
S. Rogowski*

Simulation of reversed torsion of the AlMg6 aluminium bar using the macro-molecule approach
S.V. Arinchev*

Two level investigation of plasticity driven growth of nanovoids under high rate tension of aluminum
V.S. Krasnikov* and A.E. Mayer

A viscoelastic-viscoplastic model for semicrystalline thermoplastics under long-term loading
P. Zerbe*, B. Schneider and M. Kaliske

A cyclic plasticity model with damage-induced stiffness and yield capacity reduction
S. Krenk* and L. Tidemann

Efficient implementation of a component-based joint model
A. Alhasawi*, S. Guezouli and M. Hjiaj

Flexural behavior of steel concrete composite beam with web openings and strengthened by CFRP laminates
M.B. Dawood* and D.H. Al-Saffar

2-noded zigzag beam element based in the extended Euler Bernoulli theory
D. Di Capua* and E. Oñate

Finite element analysis of R.C. arches with openings strengthened by CFRP laminates
A.Y. Ali* and B.A. Hamza

Size-scale effects in homogenization of long fiber reinforced composites
K. Poulios* and C.F. Niordson

Anisotropic failure criterion for an argillaceous rock: formulation and application to an underground excavation case
M.A. Mánica*, A. Gens, J. Vaunat and D.F. Ruiz

Modelling infiltration tests on pelletized bentonite under non-isothermal conditions
R. Barboza de Vasconcelos* and A. Gens

Numerical stress initialization in Geo-mechanics via the FEM and a two-step procedure
I. Aliguer, I. Carol, P.C. Prat, C.R. Ybern*, M.R. Lakshmikantha and J.M. Segura

XFEM formulation for discontinuities in fractured rock masses
L. Crusat*, D. Garolera and I. Carol

Analogy between consistent formulations of plasticity and liquid retention models for porous media
D.M. Pedroso* and D. Sheng

3D analysis of H-M coupled problem with zero-thickness interface elements applied to Geomechanics
D. Garolera*, J.M. Segura, I. Carol, M.R. Lakshmikantha and J. Alvarellos

Characterization of magneto-electric composites: Product properties and multiscaling
J. Schröder*, M. Labusch and M-A. Keip

Efficient model order reduction in computational thermo-mechanics: application to material forming processes
F. Chinesta*

Linking process, structure, and property in additive manufacturing applications through advanced materials modeling
W.K. Liu*, P. Cheng, O.L. Kafka, W. Xiong, Z. Liu, W. Yan and J. Smith

Damage criterion for prediction of ductile failure during severe plastic deformation
R. Lapovok*

A nonlocal scheme of integral-type for heterogeneous ductile materials
F.J.P. Reis, I.A.R. Lopes, F.M. Andrade Pires* and F.X.C. Andrade

A consistent homogenization theory and the numerical implementation of a higher order plasticity model from meso to macro
L.H. Poh* and V.T. Phan

Modeling of ductile fracture mechanisms at the microscale using a new adaptive body-fitted monolithic method
M. Shakoor*, M. Bernacki and P-O. Bouchard

MRCT element with a dislocation based plasticity model
H. Qin* and L-E. Lindgren

Unraveling the three-dimensional fracture mechanisms of a multi-phase material
T.W.J. de Geus*, M. Cottura, R.H.J. Peerlings, B. Appolaire and M.G.D. Geers

Crash of 3D-braided thermoplastic tubes: numerical and analytical tools for behaviour prediction
C. Priem, P. Rozycki*, R. Othman and D. Guillon

Crash simulations of electric cars in the EVERSAFE project
Y. Léost* and M. Boljen

Recent advances in the modelling of aircraft structural impact resistance and crashworthiness
E. Deletombe*, B. Langrand and G. Portemont

Numerical study of an arcan tensile compression shear test in dynamic: application to bonded joints
B. Valès*, S. Marguet, R. Créac‘hcadec, L. Sohier, J-F. Ferrero and P. Navarro

Investigation of stress propagation behaviour of projectile under pyro shock loading
B.C. Chae*, W.Y. Lee and B.U. Koo

Elastoplastic modelling of a ventilation test in argillaceous rock
B. Garitte and A. Gens*

A mixed finite element formulation for geotechnical problems involving localization in plasticity
L. Benedetti*, M. Cervera and M. Chiumenti

Modelling of propagation with SPH of 1966 Aberfan flowslide: special attention to the role of rheology and pore water pressure
P. Dutto*, M. M. Stickle, D. Manzanal, A.Y. Hernán and M. Pastor

Three-dimensional modelling of an embankment built on a soft soil improved with prefabricated vertical drains
P.J. Venda Oliveira*, R.F.P. Cruz, L.J.L. Lemos and J.N.V. Almeida e Sousa

A hypoplastic macroelement for single piles in sand
Z. Li, P. Kotronis, S. Escoffier and C. Tamagnini*

Numerical simulation of multi-directional hot forging for the reduction of forging defects
R.da S Septimio* and S.T. Button

Modelling of machining across length scales
A. Roy*, M. Demiral, R. Muhammad, A. Zahedi, A. Maurotto, L. Coles and V.V. Silberschmidt

Numerical and experimental analysis of aluminium joints spot welded using RFSSW technology
P.A. Lacki*, J.K. Winowiecka and A.M. Derlatka

Numerical analysis of forming sheet panels with stiffening ribs
J. Adamus* and P.A. Lacki

Considerations on identification of damage parameters: a case study
M. Vaz Jr.*

Prediction of recrystallization in friction stir processed 304L stainless steel
M.P. Miles*, T.W. Nelson, C.  Gunter and L.  Fourment

The benefit of smoothing the unloading-reloading response and rough crack-contact relationships in a finite element concrete model.
A. Jefferson*, I.C. Mihai and W. Alnaas

Mesh size independence in microplane models
V. de Carlos* and F.C. Caner

Modeling of heat and mass transfer induced by high temperature in concrete
M. Rodríguez*, C.M. López and I. Carol

Continuum multi-scale (FE²) modeling of material failure in concrete-like materials
M. Caicedo*, J. Oliver, A.E. Huespe, E. Roubin and J.A. Hernández

Numerical testing of prestressed reinforced concrete structures with PRECON3D material model
M. Galić and P. Marović*

Numerical implementation of directional distortional hardening models for metal plasticity
J. Plešek*, R. Marek, Z.  Hruby and S. Parma

A constitutive model for the anelastic behavior of advanced high strength steels
A. Torkabadi*, P. van Liempt, V.T. Meinders and A.H. van den Boogaard

Slip system activity in rate-independent crystal plasticity
M. Orthaber and T. Antretter

Double scale numerical FEM-DEM analysis for cohesive-frictional materials
J. Desrues*, T.K. Nguyen, A. Argilaga, S. Dal Pont, G. Combe and D. Caillerie

A fractional-order uniaxial visco-elasto-plastic model for structural analysis
J.L. Suzuki*, M. Zayernouri, M.L. Bittencourt and G.E. Karniadakis

Explicit mixed formulation in nonlinear solid mechanics. Softening, localization and stabilization in plasticity
N. Lafontaine*, R. Rossi, M. Cervera and M. Chiumenti

The molecular dynamics method study on the micro-spallation in metal under shock loading
J. Chen*, M.Z. Xiang and Y. Liao

Modeling of the behavior in high-cycle fatigue based on the coupling plasticity-damage in a mesoscopic scale
A. Messellek* and M. Belouchrani

Influence of void coalescence on the spall evolution of ductile polycrystalline metal under dynamic loading
F.G. Zhang*, H.Q. Zhou, X.M. Hu, P. Wang, J.L. Shao and Q.J. Feng

Applications of crack path field and strain injection techniques in dynamic fracture of quasi-brittle materials
O. Lloberas-Valls*, A.E.  Huespe, J. Oliver and I.F. Dias

Phase-field modeling of ductile fracture at finite strains
M. Ambati*, T. Gerasimov and L. De Lorenzis

Atomistic calculation of adhesion during forming
T. Makino*, P.J.A. Amrithraj, M. Ishikawa and S. Kohmura

Limit analysis on evaluation of lateral resistance of partially embedded pipes with frictional pipe-soil interface
F.C. Figueiredo*, L.A. Borges, I.D.S. Pontes and L.M. Costa

Discontinuous deformation analysis applied to the optimization of bucket elevators
R. Bravo*, J.L. Pérez Aparicio, J.J. Gómez-Hernández and P. Ortiz

A numerical method for calculating the strain rate intensity factor
S. Alexandrov* and C. Kuo

Numerical study of conditions for subsurface shear instability under contact interaction
A.I. Dmitriev*, V.P. Kuznetsov and S.Yu. Tarasov

Computer aided design of the automotive part made of magnesium alloy
M. Ambrozinski*, M. Packo, Z. Gronostajski, L. Rauch and M. Pietrzyk

A multi-phase-field simulation of carbon steel under actual conditions of a hot rolling process
M. Kihara*, M. Sano and K. Ohara

Simulation of elastic or elastic-plastic solids interacting with two-phase flows for the numerical investigation of the mechanism of cavitation damaging
C. Dickopp* and S. Müller

Computational aspects of the finite element simulation of chip formation
A. Kossa* and G. Stepan

Computational crystal plasticity for the design of materials and processes
A.M. Maniatty*, D.M. Pyle and P. Karvani

Plasticity for crushable granular materials via DEM
A. Gens*, M.O. Ciantia and M. Arroyo

Multiscale analysis applied to material modeling
P. Wriggers*

Numerical material and plate tests: advantages and challenges
K. Terada*, S. Matsubara and S. Nishi

Hierarchical finite-strain phase-field model for twinning and martensitic transformation
K. Tuma, S. Stupkiewicz* and H. Petryk

Application of the Green Tensor in the Modeling of the Dissolution-Precipitation Creep
S. Klinge* and K. Hackl

A variationally consistent thermoplastic framework for microstructure evolution of metals undergoing phase changes
M. Canadija* and J. Mosler

Atomistic modeling and simulation of long-term transport phenomena in nanomaterials
M.P. Ariza*, C.S. Martín and M.  Ortiz

Evolving microstructures in energy-based Allen-Cahn- and Cahn-Hilliard-type phase field theories
A. Bartels* and J. Mosler

Multi-scale plasticity in hierarchical microstructures: modeling laminated morphologies with application to martensitic steels
F. Maresca*, V. Kouznetsova and M.G.D. Geers

A variational thermodynamic framework for modelling non-equilibrium diffusion processes and their coupling with plasticity
L. Stainier*, L. Brassart and T. Heuzé

Computational strategies for stochastic standard generalised material models
H.G. Matthies*, B.V.  Rosic, M.S. Sarfaraz, T.R. Mendes Cajuhi and A. Ibrahimbegovic

Rock mechanics model for simulation of fracture propagation based on embedded discontinuities
M. Nikolic* and A. Ibrahimbegovic

Bayesian estimation of model parameters describing damage and elastoplasticity
B.V. Rosic*, J. Wayetens and H. G. Matthies

Modelling the thermoplastic material behaviour of dual-phase steels on a microscopic length scale and deducing corollaries for material models on a macroscopic length scale
S. Zeller*, S. Loehnert and P. Wriggers

Level set avatar method for discrete computational analysis of granular systems
R. Kawamoto and J.E.  Andrade*

Isogeometric phase field modeling of ductile fracture at finite strains
M. Ambati and L. De Lorenzis*

A NURBS-based solid-shell element employing the Assumed Natural Strain Method for structural analysis in the nonlinear regime
J.F. Caseiro, R.A.F. Valente*, A. Reali, J. Kiendl, F. Auricchio and R.J. Alves de Sousa

Isogeometric Analysis applications in structural biomechanics involving complex geometries, explicit dynamics, large deformations, inelasticity, contact, and buckling
A. Reali*, F. Auricchio, M. Conti, M. Ferraro, T.J.R. Hughes, S. Morganti and R.L. Taylor

On isogeometric yield envelopes
W.M. Coombs*

The influence of combined sheet metal forming on the increasing formability by experimental and numerical investigations
Y. Kiliclar*, O.K. Demir, I.N.  Vladimirov, C. Weddeling, S. Reese and A.E. Tekkaya

Optimization strategies and statistical analysis for springback compensation in sheet metal forming
E. Ferreira*, A. Maia, M.C. Oliveira, A. Andrade-Campos and L.F. Menezes

Physical and numerical multi-scale modeling of wire drawing of biocompatible Mg alloys in heated dies accounting for recrystallization and fracture
A. Milenin, D. Svyetlichnyy, P. Kustra and M. Pietrzyk

Robust optimization strategies for sheet metal springback compensation
A. Maia*, E. Ferreira, M.C. Oliveira, L.F. Menezes and A. Andrade-Campos

Effect of blank dimension on formability of forging blank consisting of two metals
T. Ueda*, S. Enoki and T. Iizuka

Dead zone capture in direct extrusion of aluminum by finite volume method
M. Matos Martins*, J. Divo Bressan and S. Tonini Button

Modeling with FCA-based model of microstructure evolution in ultra-thin wires of MgCa08 alloy during hot drawing
D. Svyetlichnyy*, A. Milenin, P. Kustra and V. Pidvysots‘kyy

A density field theory of plasticity based on the evolution of the dislocation microstructure
S. Schmitt*, K. Schulz and P. Gumbsch

DEM-FEM Multi-scale modelling: overcoming numerical issues
A. Argilaga*, J. Desrues, S. Dal Pont, G. Combe and D. Caillerie

Three-dimensional size-dependent crystal plasticity: Application to mechanical testing of small-scale samples
E. Husser*, E. Lilleodden and S. Bargmann

Chemo-hygral model for ASR expansion and its effects on fatigue lives of bridge slabs
Y. Takahashi*, Y. Tanaka and K. Maekawa

Modeling thermoelastoplasticity of composite materials
M.A. Abdalla* and Y.M. Shabana

Integration of elasto-plastic constitutive models in finite deformation: an explicit approach
L. Monforte*, M. Arroyo, A.  Gens and J.M. Carbonell

An anisotropic plasticity framework for damage-prone materials with shear sensitivity
J. Smith*, J. Cao and W.K. Liu

Identification and integration of directional distortional hardening model in case of monotonic proportional loading
S. Parma*, Z. Hrubý, R. Marek and J. Plešek

Reverse loading parameter determination for ultra-thin steel sheets
J.H. Choi*, F. Barlat, M.G. Lee, J.H. Kim, H.J. Bong and J.W. Lee

Numerical study for the influence of magnetism on hysteretical loop response of thermoelectric materials
J.L. Pérez Aparicio* and R. Palma

A robust and efficient 3D constitutive law to describe the response of quasi-brittle materials subjected to reverse cyclic loading: formulation, identification and application to A RC shear wall
B. Richard*, M. Vassaux, F. Ragueneau and A. Millard

A thermodynamically consistent finite deformation elastoplastic-damage cohesive zone model fulfilling balance of angular momentum
T. Heitbreder*, N.S. Ottosen, M. Ristinmaa and J. Mosler

Numerical simulations of corners in RC frames using Strut-and-Tie Method and CDP model
M. Szczecina* and A. Winnicki

The influence of the graphite mechanical properties on the constitutive response of ferritic ductile cast iron - A micromechanical FE analysis
T. Andriollo*, J. Thorborg and J. Hattel

Multi-scale and multi-chemo-physics analysis applied to fatigue life assessment of strengthened bridge decks
Y. Hiratsuka* and K. Maekawa

Lower bound element and submodel for modelling of joints between precast concrete panels
M.A. Herfelt*, P.N. Poulsen, L.C. Hoang and J.F. Jensen

How to simplify return-mapping algorithms in computational plasticity: Part 1 – Main idea
M. Cermak and S. Sysala*

How to simplify return-mapping algorithms in computational plasticity: Part 2 – Implementation details and experiments
M. Cermak* and S. Sysala

Extension of the Material Point Method for unsaturated soils: 1 point - 3 phase MPM formulation
A. Yerro*, E. Alonso and N. Pinyol

Iterative limit analysis of structures within a scaled boundary finite element framework
A. Mellati*, S. Tangaramvong, F. Tin-Loi and C. Song

Opening angle of human saphenous vein
J. Vesely*, L. Horny, H. Chlup, T. Adamek and R. Zitny

Numerical study of intervertebral prosthesis
A. Pérez*, I. Aliguer, C.M. López, A. Molina and I. Carol

Cell-centred model for the simulation of curved cellular monolayers
P. Mosaffa, N. Asadipour, D. Millán, A. Rodríguez-Ferran and J.J. Muñoz*

Rheological model for cell fluidisation process
N. Asadipour* and J.J. Muñoz

Uniaxial tensile test and constitutive modelling of perivascular adipose tissue
T. Vonavkova*, L. Horny, T. Adamek and R. Zitny

Data-driven computational mechanics
M. Ortiz*

Recent Advances in Non-intrusive Coupling Strategies
O. Allix*

The method of multiscale virtual power. A recipe for the development of RVE-based multiscale model
E.A. De Souza Neto*

Effect of initial thickness deviation and reduction on longitudinal and cross-sectional precision after tube drawing using plug
S. Tasaka*, T. Kuboki, K. Kuroda and T. Okui

A method for suppression of defects in zigzag bending of sheet metal
T. Kuboki*, S. Tanabe, T. Mochizuki and H. Abe

Electro-thermo-mechanical finite element analysis on DC pulse resistance pressure sintering process of zirconia part
K. Hayakawa*, Y. Kubota, T. Okano, S. Tanaka, K. Yoshida and T. Nakamura

Reverse loading tests of steel tube under biaxial stress states
D. Yanaga*, K. Kuroda, S. Yaita and T. Kuwabara

New incremental forging of twisted shape
T. Makiyama*, T. Yagami, T. Teramae and G. Hirt

New cold-expansion process for end sizing and dimensional precision of inside geomatry on both ends of line pipes
K. Kuroda*, T. Arita, T. Takano, H. Osako, T. Okui and M. Akiyama

Dimensional hyperreduction of nonlinear finite element models
J.A. Hernández* and J. Oliver

Geometric structures in model reduction methods
A. Falcó*

Towards real time analysis of parametric multiphysical models based on Model Order Reduction
J.V. Aguado*, D. Borzacchiello and F. Chinesta

Reduced-basis based S-FEM and G-FEM for the efficient simulation of processes involving moving heat sources
D. Canales*, A. Leygue, F. Chinesta, D. González, E. Cueto, A. Huerta, E. Feulvarch and J-M. Bergheau

An investigation of reduced order modelling techniques in computational homogenisation schemes for composite materials
R.A. van Tuijl*, J.J.C Remmers and M.G.D. Geers

On the simulation of Sheet Moulding Compound (SMC) forming processes
M. Pérez, L. Oter, E. Abisset-Chavanne, E. Cueto*, I. Alfaro, D. González, C. Binetruy and F. Chinesta

Analysis of camber formation, suppression and control in hot rolling of wedge-shaped slabs by utilizing FEM and analytical concepts
A. Kainz*, T. Pumhössel, M. Kurz, A. Schiefermueller and K. Zeman

Coupled thermal viscoplastic flow of metals with PFEM
A. Franci*, J.M. Carbonell and E. Oñate

Modelling hot levelling processes by utilising arbitrary lagrangian eulerian (ALE) concepts
C. Wöckinger*, E. Parteder, A. Kainz and K. Zeman

Plastic localisation and ductile fracture of electromagnetically-loaded sheet metal plates
B. Erice* and D. Mohr

Development of multi-mesh cellular automata-finite element model of dynamic recrystallization during rolling process
M. Sitko*, G. Smyk, L. Madej and M. Pietrzyk

Increasing numerical efficiency in coupled eulerian-lagrangain metal forming simulations
F. Hammelmüller* and C. Zehetner

An efficient tool for multi-scale material design and structural topology optimization
A. Ferrer*, J.C. Cante and J. Oliver

Efficient computational homogenization of simple elasto-plastic microstructures using a modified Ritz-Galerkin approach
S. Wulfinghoff* and S. Reese

Multi-scale modelling of stress-induced martensitic phase transformations
F. Adziman, D. de Bortoli* and E.A. de Souza Neto

A two-scale constitutive parameters identification procedure for elasto-plastic fracture
V. Carollo*, C. Borri and M. Paggi

Variationally-based quasicontinuum method for elasto-plastic lattices
O. Rokos*, L. Beex, J. Zeman and R.H.J. Peerlings

A parallel dual reciprocity boundary element method implementation for the solution of elastoplastic problems with elastic-plastic domain decomposition
H. Bayındır, B. Baranoğlu, T. Çekilli* and Y. Uğurlu

Design of metal forming production processes and cycles by using heterogeneous hardware architectures
L. Rauch and J. Kusiak*

Parallelization of BiCGMisR method with Cache-Cache Elements preconditioning
K. Iwasato* and S. Fujino

Parallel 3D limit analysis via the alternating direction method of multipliers
N.M. Deusdado*, M. Vicente da Silva and A.N. Antão

Parallel strategy for high performance isogeometric analysis using Bézier decomposition method
G. Bui* and G. Meschke

Investigation of ductile fracture in fine blanking processes and virtual prediction of scar formation by means of 3D ALE simulations
T. Wesner* and P. Hora

Simulation of ductile failure in pre-notched cylindrical test specimens using continuum damage mechanics model
M. Kumar* and P.M. Dixit

Modelling of plastic hinges in seismic structural analysis using LUSAS
Q.Z. Xiao*, G. Cole, D. Irving and P. Lyons

Determination of asymptotic state of a structure using the Proper Generalized Decomposition
S. Zuchiatti*, E. Feulvarch, J-C. Roux, J-M. Bergheau, G. Perrin and S. Tissot

Embedded techniques for finite element heat flow space with an embedded discontinuities interface
M. Davari*, R. Rossi and P. Dadvand

Automated shape optimization using a multigrid method and estimation of distribution algorithms
S.I. Valdez*, N. Faurrieta, J.L. Marroquín and S. Botello

Recursive calculation of consistent tangent operator in elasto-plasticity
B. Starman, M. Halilovič, M. Vrh and B. Štok*

Shakedown analysis of 3D frames subjected to complex statical and seismic load combinations
L. Leonetti*, R. Casciaro and G. Garcea

A multi-mechanism model for cutting simulations based on the concept of generalized stresses
C. Cheng*, R. Mahnken, I.M. Ivanov and E. Uhlmann

Computational modeling of ductile fracture processes
A. Needelman*, A. Srivastava and S. Osovski

Minimizers in multi-physics of solids. Application to phase field modeling of Fracture
C. Miehe*

Computation on dislocation-based crystal plasticity at micron-nano scales
Z. Zhuang*, Z.L. Liu and Y.N. Cui

ECCOMAS PhD. Thesis Award
The numerical solution of large scale dynamic soil-structure interaction problems
P. Coulier*, G. Lombaert and G. Degrande

Efficient models for the off-line computer system for design of the hot rolling and laminar cooling technology for AHSS strips
L. Rauch, K. Bednarski, J. Kitowski and M. Pietrzyk*

Fundamental FEM analysis on tensile deformation of the sheet metal embossed on both sides of the plane
T. Aso and T. Iizuka*

FE simulation of the expansion of a WE43 magnesium alloy stent in a representative blood vessel
S. Yoshihara*, G. Iwamatsu, Y. Amikura and B.J. MacDonald

Estimation of lubricity by numerical method on surface of NbC-reinforced tool for hot steel rolling
M. Akiyama* and Y. Higashigawa

Influence of elastic deformation of tool on sheared part quality in axisymmetric shearing process
Y. Yoshida*

Proposal of new specimen geometry for tension test restraining non-uniform deformation
R. Morimoto* and M. Akiyama

On exploiting the weak invariance of multiplicative elasto-plasticity for efficient numerical integration
A.V. Shutov*

Model-wise algorithm for the resolution of fatigue problems
L.G. Barbu*, S. Oller, X. Martinez and A.H.  Barbat

Large scale validation of the Barcelona plastic damage model with a new hardening law under Ultra Low Cycle Fatigue conditions
L.G. Barbu, X. Martinez*, S. Oller and A.H.  Barbat

Ultimate capacity of cyclically-loaded steel pipes for offshore pipeline applications
G. Chatzopoulou* and S. A. Karamanos

Higher-order gradient plasticity-damage model for microstructural modeling of dual phase steels
R. Abu Al-Rub*, M. Ettehad and A. Palazotto

A finite element basis for distortion gradient plasticity theory
E. Martínez-Pañeda*, C.F. Niordson and L. Bardella

Gradient crystal plasticity simulation of large-grain thin-sheet metal
H. Pouriayevali *, E. Bruder and B-X. Xu

Micro-structural evolution in strain gradient crystal plasticity
S.A. El-Naaman*, K.L. Nielsen and C.F. Niordson

Numerical prediction of Portevin-le Châtelier effect by means of rate-dependent plasticity models under several strain paths
L.Z. Mansouri*, S. Thuillier, J.W. Yoon and P.Y. Manach

Recent advances in residual stress simulation caused by the welding process
H. Sallem*, E. Feulvarch, H. Amin El Sayed, B. Souloumiac, J-B. Leblond and J-M. Bergheau

High-fidelity numerical simulation of Additive Manufacturing processes
M. Chiumenti*, W. Huang, X. Lin, M. Cervera, C. Agelet de Saracibar, N. Dialami, L. Ma and L. Wei

Influences of yield criteria on stress based forming limit diagram of DP980 steel
S. Panich* and V. Uthaisangsuk

Study on the springback of FDSC MPF for cylindrical surfaces
B. Jia*, W. Wang and H. Di

Finite element modelling of cold pilgering of tubes
Y. Azizoğlu*, M. Gärdsback, B. Sjöberg and L-E. Lindgren

Mesoscale modeling of hardmetal
M. Öhman*, S. Johansson, G. Wahnström, M. Ekh, F. Larsson and K. Runesson

Accelerating the Hierarchical Multi-Scale (HMS) software by spatial clustering strategies
M. Khairullah*, J. Gawad, D. Roose and A. Van Bael

Implementing continuum damage-healing mechanics within a multiscale finite element setting
S.P. Triantafyllou*

Numerical modelling of the Wedge Splitting Test in rock specimens, using fracture-based zero-thickness interface elements
J. Liaudat*, D. Garolera, A. Martínez, I. Carol, M.R. Lakshmikantha and J. Alvarellos

Mesomechanical analysis of concrete under loading that generates rotation of cracking
L.  Puiggrós*, C.M. López, M.  Rodríguez and I. Carol

Damage plastic model for concrete failure under impulsive loadings
D. Guilbaud*

Elastoplastic analysis of concrete and geomaterials with the DEM
F. Arrufat* and E. Oñate

Simulations of fracture in concrete beams under bending using a continuum and discrete approach
M. Nitka, L. Skarzynski and J. Tejchman*

Non-linear static analysis of masonry structures
J. Coene*, S. François and G. Degrande

Application of finite discrete element method in dynamic analysis of masonry structures
Ž. Nikolić, H. Smoljanović* and N. Živaljić

Interaction between dislocation and coherent twin boundary by quasicontinuum model
H-S. Tran*, H. Tummala , L Duchêne, V Peron-Lührs, M Fivel and A.M. Habraken

The role of the excess volume at the nucleation of plastic deformation in metals
D.S. Kryzhevich*, A.V. Korchuganov, K.P. Zolnikov and S.G. Psakhie

Features of interface formation in crystallites under mechanically activated diffusion. A molecular dynamics study
A.Yu. Nikonov*, A.I. Dmitriev, I.S. Konovalenko, E.A. Kolubaev, S.V. Astafurov and S.G. Psakhie

Simulation of nanoparticle formation under synchronous electric pulse explosion of metal wires
K.P. Zolnikov*, D.S. Kryzhevich, A.V. Korchuganov and S.G. Psakhie

Efficient mixed tetrahedral element for simulation of SMA structures
E. Artioli*, P. Bisegna, F. Caselli and N.A. Nodargi

Sources of error and limit of applying the energetic-based regularization method
M. Matallah and N.  Aissaoui*

An incremental energy minimization state update algorithm for isotropic elastoplastic materials
N.A. Nodargi* and P. Bisegna

Application of node-based uniform strain elements to mixed limit analysis
K. Kasugai*, J. Saito and S. Kobayashi

On efficient FEM calculations of plastic and viscoplastic deformations in 6-parameter nonlinear shell theory
S. Burzyński*, J. Chróścielewski and W. Witkowski

Similarity methods in elasto-plastic beam bending
C. Zehetner*, W.  Kunze, F. Hammelmüller and H. Irschik